SPECIAL REPAIR OF SLIDING DOOR OF LOGISTICS HANGAR AND GES HANGAR, RENOVATION TO RATION STAND AND STORE (BLDG NO P-264) AT 9 BRD AND PROVISION OF PARKING SHED AT OFFICERS CAR PARKING AT AF STN PUNE.

Amount

S&F in repairs Motorised rolling shutter in GES hanger for openning size Clear width 7340mm and Clear height 4800mm with cutain made of single skinned galvanume sheet laths with natural fininish pressed galvalume stleel hood and motor cover with natural finish, ISI certified european make Direct drive operator including Three station push button with deadman control, external safty brake , torque enhancement, surface mounted key switch for opening and closing from outside and inbult wicket door 900mmx1850 mm all as per manfacturer specification confirming IS 6248 also dismantling of existing steel sliding doors complete all as specified and directed.

S&F in repairs Motorised rolling shutter in Logistic hanger for openning size Clear width 8500mm and Clear height 5000 mm with cutain made of single skinned galvanume sheet laths with natural fininish pressed galvalume stleel hood and motor cover with natural finish, ISI certified european make Direct drive operator including Three station push button with deadman control, external safty brake , torue enhancement,surface mounted key switch for opening and closing from and inbult wicket door 900mmx1850 mm all as per manfacturer specification confirming IS 6248 also dismantling of existing steel sliding doors complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and directed.

M&L Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 150mm in a grid of grid of 1.5m x1.5 m cast insitu in alternate grid manner complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified and directed.

Taking down plaster of any description on brick or stone wall including racking out joints hatching for key scrubbing down with water including terrozo topings etc complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 on broken chajjas /facia/walls/ceilings etc, area n. exc 3 sqm each patch (in repairs) , includings finishing to match with existing surfaces complete all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair complete all as specified and directed.

M&L for preparation of plastered/unplastered surfaces and 1mm wall care putty applying two coats of whte wash on walls complete all as specified and directed.

Dismantling of wall/ceiling board as in ceiling and lining of any gauge or any thickness including cover fillets complete all as specified and directed.

M&L for 9mm PU coated Gypsum Board in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 20mm graded aggregate type B1 as in flooring complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & Rendering in CM : 1;3 10 mm thick as a back coat 100 mm high in skirting complete all as specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.Rough finished surfaces of concrete flat complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for mild steel TMT bar 10mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mils steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bar 5mm and over upto and incl 10mm bar cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mils steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for reinforced cement concrete in Beams, cantilevers, bressummers, lintels over 1.5m span type B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed.

M&L for reinforced cement concrete in Columns, pillars, piers, posts and struts type B1 1:2:4 20 mm graded aggregate complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

M&L 100mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base complete all as specified and directed.

M & L two coats of cement base paint on new plastered surfaces incl a coat of primer complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface in sot/ disintegrated rock complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass concrete 1:3:6 type C2 using 40 mm graded aggregate complete all as specified and directed.

S&F Rolled sections as in coloums, vertical posts etc. fixed with angle cleats or other connecting plates Fe 290 (Gde E-165) complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc (Gde E-250) Quliaty A complete all as specified and directed.

M&L 12 mm Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed.

S&F MS for wind tie for roof including securing bolts including all necessary drilling bolting or riveting etc and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L painting with synthetic enamel paint two coats over a coat of red oxide, zinc cromium primer including preparing the new steel surfaces of any description over 10cm in width or girth complete all as specified and directed.

M&L two coat of synthetic enamel painting on surface of any description n exc 10 cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in for cable trech and side wall complete all as specified and directed.

Soft/loose soil

Hard/dense soils

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm in dense/Hard soils complete all as specified and directed.

Removing the excavated surplus soils exceeding 50mtr but N.exc 250 mtr and depositings where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm of type C1 1:3:6 using 20mm graded aggregate in width and setting in mortar 1:6 complete all as specified and directed.

M&L for 40mm coping concrete 1:2:4 B0 type 12.5mm grade aggregate complete all as specified and directed.

Surface excavataion n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Excavating in post holes for hard / dense soil (or similar holes) each not exc 0.5 Cum in any type of soil, getting out, returning fillimg in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm thick watering and well ramming and removing surplus soil to a distance n, exc 50m and making good surface complete all as specified and directed.

Cement concrete 1:2:4 Type B-2 using 40mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified and directed.

M&L with fabrication for mild steel tubular poles or trusses purlin etc including special shaped washer etc. complete using ERW or induction butt welded tubes, confirming to IS-1161-1979 grade St-240 complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for laying/spreading of sand as in 25 mm thick cushion to precast concrete interlocking paver block incl watering & consolidating complete all as specified and directed.

M&L for 60mm thick Machine pressed precast concrete interlocking coloured rubber mould paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, jointed with grey cement and pigment complete all as specified and directed.

Plain Cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) in edging of path (interlocking paver) and the like including weathering slightly rounded or chamfered angles as directed including form work and finishig all exposed surfaces complete all as specified and directed.

M&L Hardcore(broken stone of boulder)of guage n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 40mm thick Cement concrete 1:2:4 type B-1(using 20mm graded aggregate) as in flooring, finished surfaces even and smooth without using extra cement complete all as specified and directed.

Taking down existing tube light fittings and disconnecting connection cable ends complete complete all as specified and directed.

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets complete all as specified and directed.

One light point controlled by one switch.

One Exhaust/Wall mounted /Ceiling point controlled by one regulator/switch

One 3 pin socket 5 A on independent board.

One 3 pin socket 5 A onsame board.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLS PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping 25mm size with all fittings/fixture etc fixed wall and open recessed type Plastic switch board) made of robust Synthetic material Fire Proof, Anti corrosive & shock proof ISI Marked complet for housing one 15 A Switch / sockets complete all as specified and directed.

S&F Vertical double door Distribution board TPN 4 way 200 A rated busbar suitable for incomming MCCB and Out going MCBs including MCCB 100A 4 Pole 18 KA - 1 Nos complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 16 way 230 V with neutral link and with 200 A bus bar complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 12 way 230 V with neutral link and with 200 A bus bar complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 8 way 230 V with neutral link and with 200 A bus bar complete all as specified and directed.

Supply and fix MCB SPN 40 Amp, 230 volt 'C' series complete all as specified and directed.

S&F MCB SP 240 volt 6 to 32 A 'C' series complete all as specified and directed.

Supply and fix switch piano flush type 5 A one way complete all as specified and directed.

S & F Socket outlet 2 in 1, 3 pin, 5A flush complete all as specified and directed.

Supply and fix switch piano flush type 15 A one way complete all as specified and directed.

S & F Socket outlet 2 in 1, 3 pin, 5 and 15 A flush type complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite/PVC three terminal 65x50mm complete all as specified and directed.

Supply and fix high quality indoor Surface and wall mounted LED batten 20 Watt, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10%. complete with all accessories internally pre-wired and including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal complete all as specified and directed.

Supply and fix Energy efficient recess mounted LED panel fitting 36 Watt suitable for 2x2 grid in white colour with high quality diffuser for uniform light & high Efficiency. Made from CRCA sheet, Pre-coated white color. Separate replaceable electronic driver, lumen constant of 5700/6500K colour temperature with current electronic connector and making prpper connections complete all as specified and directed.

Supply & fix wall mounted fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified and directed.

Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V , 1400 mm sweep complete all as specified and directed.

Taking down ceiling/wall/air circulator /padestal fans any type and size from the site by disconnecting all electrical connection ,and cleaning , rubbing by emery paper , servicing , oiling , greasing incl replacing small parts like bush/bearing etc and applying two coat spray painting complete and refixng on site making all nacessary connecrtion and testing for smooth functioning complete all as specified and directed.

M & L for sub main wiring with two runs of single core 6.0 Sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 4 Sq mm single core FRLS PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor including PVC casing & caping complete all as specified and directed. ( Note :Two runs of 6.0 Sqmm copper cable,one run of earth wire of 4 Sqmm copper cable and one run of casing and caping shall be measured & paid as one length.)

Supply and Install hi wall split units indoor/outdoor complete with remote control unit and with inbuilt air ioniser and plasma filter for better indooor air quality of capacity 2 Ton Spilt Air Conditioners complete all as specified and directed.

Suppy and fix automatic boost buck transformer for low and high Voltage correction equipped with electronic transistorised relay suitable for correction, single phase AC supply complete with volt meter and designed for input voltage 170 Volts to 250 Votls and output voltage stablized between 215 Volts to 240 Volts of capacity ( 5 KVA ) complete all as specified and directed.

Single pole and neutral enclosure with a two pin and earth plug and socket 240 V complete with one double pole MCB 20 Amps complete all as specified and directed.

M & L for sub main wiring with four runs of single core 10.0 Sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 650 / 1100 V grade with colour code and two run of 6 Sq mm ( 22 / 0.3 mm ) single core FRLS PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor including PVC casing & caping complete all as specified and directed. ( Note :Four runs of 10.0 Sqmm copper cable, two runs of earth wire of 6 Sqmm copper cable shall be measured & paid as one length.)