Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.5 LAccepted-AOC | L1 | Accepted-AOC Reasonable Rate | |
| 2 | L2₹49.4 L+₹37,015.27 (0.76%)Rejected-Finance | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹49.5 L+₹47,435.80 (0.97%)Rejected-Finance | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹49.6 L+₹64,145.80 (1.31%)Rejected-Finance H NO 400 FLAT NO 13 A SEMATILLA DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-Finance Higher bid value |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
21 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
ADDN ALTN TO PLUMPING LINE AND SANITARY FITTING IN MD ACCN COMPLEX AT BLDG NO P76 P77 P78 AT GAGAN VIHAR AND P130 AND P135 AT UMED VIHAR AND CERTAIN REVENUE WORKS TO BLDG NO T50 SANGAM COMPLEX AND BLDG NO T50 SANGAM COMPLEX AT RMS
2022_MES_552745_2
8496/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
GE 868 EWS
₹96,000
Yes
27 Feb 2023
26 Oct 2022
23 Nov 2022
26 Oct 2022
21 Nov 2022
9 Nov 2022
26 Oct 2022 - 8 Nov 2022
Amount
B/R Portion Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete
Taking down chowkhat or frames with shutters not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specifed and directed.
Taking down shutters of any description not exc 1.0 Sqm each Complete all as specifed and directed.
Disamantling wall and ceiling boards (fibre, pulp, insulation boards etc.) any thickness including cover fillets complete all as specified and directed
Excavation in trenches in soft/loose soil not exc 1.5mtr wide and not exc 1.5 mtr deep for foundation etc or for manholes not exc 10 sqm on plan and exc 1.5 mtr but n exc 3 mtr in depth and getting out all as directed by Engr-In-Charge.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone)as in fdn filling mass concrete complete all as specified and directed.
M&L Brick work with sub class B brick straight or curved on plan exc 6.00 m mean radious built in CM 1:6 complete all as specified and directed.
M & L 40mm thick PCC 1:2:4 B0 (12.5mm graded crushed stone aggregate ) as in Damp proof course to horizontal or vertical surfaces including necessary form work complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping including necessary formwork complete all as spfd and directed
M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips quality conforming to IS
M&L for RCC Nominal Mix Type A1 1:1.5:3 (using 20 mm graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
M&L form work with fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nexc 200mm thick (horizontal or sloping)
S & F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow square/rectangular section or flat sections) including distance pieces, cleats etc. complete all as specified and directed.
S&F Plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W (Gde-E-250 quality-A)
S&F bands, straps or stays , plain angle cleat or flat iron cleat or securing purlins to wood trusses or rafters, knee piece and similar small articles etc conforming to Fe-290 Gde E-165.
S & F Steel work in tubular trusses including special shaped washer etc. for steel work in roof trusses, purlins,rails and fastening heavey bracket framing including distance pieces, cleats etc complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240.
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S & F for aluminium door shutters, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing ,handles 2 Nos in each door,hinges, anodised aluminium snap beading screws,mortice lock with keys etc. complete all as specified.
S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening.
S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site including nacessary fittings etc.
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints, 2nd class HW.
M&L for 35 mm thick 2nd class hardwood plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified and directed.
S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed
M&L butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm long size
S&F Aluminium handle cast type anodised 150 mm long
M&L for fixing 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame and all as specified and directed by Engineer-in Charge.
S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in birds proofing/Window Jali as directed by Engr-in-Charge.
S&F Sheet glass 4.8mm thick, ordinary quality ground or obscured or frosted, on one side and glazing with oil putty in squares not exceeding 0.5sqm in each pane.
S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S & F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F UPVC square / 'U' type rainwater gutter system/rain harvest pipe (pathy) consisting 160mm runner joint, stop end, stop end drop etc with all necessary fittings and accessories complete all as specified and directed by Engr-in-Charge.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-painted self embossed, textured designer board E-Board Classic to be fixed or laid with GI frame grid/section size 600mm x 600mm with main runner 38x24x0.9 mm thick, cross tee 8.6x24x0.9mm and wall angle 19 x19x0.9mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified.
M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface.
M&L PCC 1:3:6 type C-2 100mm thick as in sub base of floor.
M & L for PCC 1:3:6 type C-2, 75 mm thick (using 40 mm graded stone aggregate) as in Sub floors, Sub bases, Floors and Pavings etc all as specified and directed.
M & L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Same as per above but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.
S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement
M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed .
S&F Non skid ceramic floor colour tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement
Same as per ser No 4 but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as 'specified and as directed.
M&L for anti fungal chequered cement concrete tiles 200x200x25mm thick with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.
Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar.
M & L rendering 5 mm thick in cement mortar 1:4 on fair faces of brick or concrete work even and smooth without using extra cement in ceiling.
M&L for rendering 10mm thick plaster in CM 1:6 on fair faces of brick or concrete work finished the surface even and smooth without using extra cement.
M & L rendering 15mm thick on cement mortar 1:4 brick or concrete work finished the surface even and smooth without using extra cement..
M&L for preparation of new plastered surfaces and applying three coats of white wash on walls all as specified & directed
M&L for Preparation of plasterded or un plastered new surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
M&L for applying two coats of oil bound distemper over one coat of primer over a coat of 3mm thick wall care putty on new plastered surfaces of walls including preparation of new surface complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified & directed by Engineer-in-Charge
M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work including providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
M&L for preparation of new steel surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a red oxide primer.
M&L for second class hardwood as in scantlings clean sawn timber fixed complete all as specified and directed.
M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm.
S&F 40 mm flap width of Continuous (piano) hinges, mild steel, bright finish or electrogalvanised.
M&L for 18/19mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face fixed with screws to timber framework
S & F external teak wood lipping, 6mm thick, fixed with nails complete all as specified and directed.
M&L for 75mm Aluminium handles, cast type, anodised complete all specified & directed.
S&F 40 mm cupboards knobs fixed with nut screw and washer of brass polished complete as specified and directed.
S&F magnet Catcher for cub board complete all as specified and directed.
M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
M&L for preparation of new wooden fillets surfaces and wood based surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pint wood primer. in tint as directed.
M & L 25mm thick second class hard wood boarding , plained one side with butt joints as in eaves boards complete all as specified and directed.
Supply and fixing stainless steel (conforming to AISI-304 grade) plate rack of overall size 750mm x 600mm x 254 mm or equivalent made of 1mm thick stainless steel sheet fixed on CP cantilever brackets, complete all as specified and as directed. Make : Jayna Cat No SBSD-05 or equivalent approved make.
S&F Stainless steel sink with draining board made out of 1.00mm thick sheet for kitchen or laborotary with plugs, washers, waste pipe including beding in cement mortarto dwarf wall or including fixing ,cast iron cantilever bracket and connecting union to pipe overall size 915x460mm with bowl size 410mmx330mmx160mm complete and all as specified and directed by Engr in charge.
S & F Florentine three in one wall mixer with hand shower complete all as specified and direcated and approved by GE. (Make- Jaquar and equivalent).
S&F in repairs CP Central hole basin mixer fancy type 15mm dia all as specified and directed and as approved by GE.
S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and flynuts, screwed for iron pipe 15mm dia complete all as specified.
S&F in repairs 15mm dia stop cock fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed .
S&F in repairs one piece EWC with duroplast slim seat cover and twin flush fittings 665 x 355 x 750 mm (snow white) S trap 300mm and fittings complete all as directed and approved by GE (Make Cera and cat No S1013142).
S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as directed.
S& F cast iron P or S trap of 100mm dia
S&F CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.
Supply and fixing in repairs vitreous china squatting pan water closet,Orrisa pattern of size 580mmx440mm white with integral foot rests excluding flushing cistertn and flush pipe.
S&F in repairs10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified .
S&F in repairs vitreous china fancy wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed as approved by Garrison Engineer
S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed as approved by Garrrison Engineer
S/F brass chromium plated fancy shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as spd & directed and as approved by Garrison Engineer
S&F CP toilet paper holder fixed to walls complete all as specified and directed and approved by GE
S&F in repairs corner glass shelf assembly 250mm radius made of 6mm thick craaylic glass, with CP railing, fixed with suitable rowal plug & screws complete all as specified and directed.
S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified.
S&F grating down 100mm dia with waste hole of PTMT (Min wt 25 gms).
S & F in repairs Cast iron floor trap of 100 mm dia outlet, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)
S & F in repair 32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
S & F for 15 mm Unplasticized PVC pipes of pressure rating 10 kgf/sq. cm complete all as specified and directed
S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick, fixed to walls with plugs & CP brass screws complete all as specified and directed.
Taking up or down 15 mm GI steel tubing and connections including cleaning for refixing or removal to store
All as per item No 95 hereinbefore but 20mm dia .
S&F 15mm bore GI water tubing medium grade laid in floors or fixed in wall including GI fittings.
S&F 20 mm bore GI water tubing medium grade laid in floors or fixed in wall including GI fittings.
S&F in PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor
S&F PVC (SWR) 110mm dia bends in any radius.
S&F PVC (SWR) 110mm dia junction single T equal or un equalwith an floor
S & F in repairs for 110mm bore dia pipe stack clamps out of 50 mm by 5mm flat iron & 16 mm dia round iron stays, including bolts & nuts & secuirng ends of stay to wall or roof
Cutting into exisiting manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching and forming branch channel, half round or 3/4 section in cement concrete 1:2:4 type B smooth finished and reforming benching as required, internal dia of pipe 110/150mm
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm In soft/ loose soil.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point,in soils.
M&L for brick work with sub class "B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete al as specified and directed.
E/M Portion Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme
One light Point controlled by one way switch .
One 3 pin socket outlet 5 Amps on the same board with other switches.
One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No 108 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5A Make:- Havells/Legrand/Anchor
M&L for Socket outlet, 2 in 1, 3 pin 5A flush typeMake:- Havells/Legrand/Anchor
M&L for Switch Socket combination, 2 in 1, 5 pin 5A flush typeMake:- Havells/Legrand/Anchor
M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type Make:- Havells/Legrand/Anchor
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. Make:- Havells/Legrand/Achor
M&L for sub main wiring with two runs of 6.00 Sq mm and one run of 6.00 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. (NOTE:- two runs of 6.00 Sq mm + one run of 6.00 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length).Make:- Richa/ Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme
S&F for , IP>= 20, Class-I, LED Light fitting 1 x 20 watt (4 Ft), 240 V, PF-0.9, CRI >= 80, CT>= 6000 K, Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton/Bajaj/ Philips/Havells.
M&L for 10 Watt LED, 2', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed. Make : Havells/Bajaj/Philips/CG
Suppy and fixing decorative wall light fixture (City 3) made up of polycarbonate, suitable for 9 W retrofit LED Lamp B22 Base complete all as specified and directed. Make : Havells/Bajaj/Philips
Supply and fixing LED luminaire 600 mm x 600 mm, (2' x 2') 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make : Crompton/Bajaj/ Philips/Havells.
Supply and fixing Wall mounted fan 400 mm sweep PP Blade and thermal overload protection for long lasting motor power consumation 58 Watt fan motor speed 1330 RPM Air dilivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge. Make : Havells/Bajaj/Crompton
M&L for metal clad AC socket point single pole and neutral enclosure with a tow pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed. Make: Havells/HPL/Legrand
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with 200 Amp rated bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. Make:- Legrand Cat No 507611 or equivalent in ABB/Siemens
M&L for MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed. Make:- Legrand Cat No 408636 or equivalent in ABB/Siemens
M&L for MCB SP 6-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed. Make:- Legrand Cat No 408587-95 or equivalent in ABB/Siemens
Taking down and refixing Exhaust fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating lement upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed.
Taking down and refixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre,complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed.
Rameshwar Prasad
M/S VIKASH TRADERS
M/S ARVIND GROUP OF CONSTRUCTION & INFRASTRUCTURE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .