Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.2 LAccepted-AOC | L1 | Accepted-AOC Lowest bid found in order | |
| 2 | L2₹13.3 L+₹14,541.50 (1.10%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹14.1 L+₹95,281.25 (7.22%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid | |
| 4 | L4₹14.8 L+₹1.6 L (11.9%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest bid | |
| 5 | L5₹15.3 L+₹2.1 L (16.0%)Rejected-AOC | L5 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹35,800
Closing Date
21 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
SPECIAL REPAIR TO BLDG NO T 66 AND T 67 AND PROVN OF 01 SEPTIC TANK AT DRUGMULLA
2022_MES_547220_1
GE 874/EWS-42/2022-23
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹35,800
Yes
6 Oct 2022
24 Aug 2022
23 Sept 2022
24 Aug 2022
21 Sept 2022
7 Sept 2022
24 Aug 2022 - 31 Aug 2022
Amount
B/R and E/M Portion
Demolition of cement concrete (Un-reinforced ) in ground floors and pavings n exc. 15cm thick, below or above ground level.
Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering.
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Taking down chowkat with shutters exc.1.5 Square Metre but n.exc. 4 Square Metre each (without taking off shutters from the frame)
Taking down chowkat with shutters n.exc. 1.5 Square Metre (without taking off shutters from the frame)
S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid all as specified.
S&F plain framed panelled shutters 35mm thick of 2nd class softwood, (any numbers of panels), with panels of timber flats on both sides of veneered particle board medium density, wood particle board with commercial face veneeres on both sides fitted to chowkhat.
S & F glazed & skeleten shutters 35mm thick of 2nd class softwood, open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.20 (a) fitted to chowkhats.
Dismantling timber scantling 40 Sq cm and over in section and in any position in unframed work.
M&L second class soft wood (kail) in scantling clean swan in unframed work complete all as specified.
All as per item above but except timber.
Dismantling of boarding of any description fitted in any position with nails.
2nd class softwood weather boarding clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps joints.
Dismantling wall and ceiling board (fiber, pulp, insulation, etc. ) or insulation board / slab / blankets, any thickness, including cover fillets.
M & L plywood, 6mm thick grade, BWR type BB fixed with nails to timber frame work in ceiling.
M&L Plain fillets of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section, clean swan, secured nails.
Two coat of synthetic enamel paint over one coat of pink primer on new plywood surfaces of any description, not otherwise described over 10cm width or girth .
Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick sorrounds, glazad with putty or fixed with beeds.
S&F Sheet glass ordinary quality in squre n.exc. 0.5Square Metre in each pane of 4.00mm thick.
Galvanised mild steel wire cloth in repairs having 0.56mm dia of wire and average width of aperature 1.18 mm complete.
M&L for MS barrel tower bolt, stove enamelled black, with bright bolt of 100mm long.
M&L for MS barrel tower bolt, stove enamelled black, with bright bolt of 150mm long.
M&L for MS Sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia of 250mm long.
M&L for MS butt hinges medium Weight, cold rolled 100mm long.
M&L for MS butt hinges medium Weight, cold rolled 75mm long.
M & L for mild steel pressed handles, oval type, stove enamelled black of 100mm long.
M & L for mild steel pressed handles, oval type, stove enamelled black of 125mm long.
75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or floor complete all as directed by Engr-in-Charge.
M&L for Virified Ceramic light shede tiles 10 mm thick (square or rectangular) polished, area of each tiles not exceeding 0.36 Square Metre, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 and 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg).
Taking down cement plaster on brick or stone walls etc including rakingout jonits hacking for key scrubbing down with water etc.
M&L for 15mm thick rendering in cement mortar 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for two coats of oil bound distemper on new plastered surfaces complete all as specified and directed.
M&L for applying two coats of cement base paint on wall over a coat of priming paint including preparation of new plastered or un-plastered surfaces, complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint including preparation of old wooden surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint, including preparation of old painted steel surfaces sheets of any description over 10cm width or girth not otherwise described complete all as specified.
M&L for preparation of old plastered surfaces of wall and applying one coat of oil bound distemper over a coat of average 1mm thick Birla putty complete all as specified.
M&L for one coat of cement base paint on old painted surfaces of walls including preparation of old surface complete all as specified and directed.
Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.
M&L 50 mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate ) as in plinth protection finished even aned fair without using extra cement all as specified.
M&L for 10 ltrs capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets & PVC flush pipe 32mm bore, fixed in repairs.
S & F Vitreous China Ware Wash hand basin white, flat back of size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand, fixed in repairs.
M&L 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repairs.
S&F Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe, fixed in repair.
S&F Bib taps cast copper alloy, chromium plated, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, fixed in repair.
Vitreous china water closet pan pan and trap (pedestal pattern) white, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc, excluding flushing cistern and flushing pipe and including PVC seat cover & including fixing bolts, complete all as specified and directed.
S&F 1000 Ltr capacity PVC water storage tank (cylinderical vertical with closed top ) and fixed in position all as specified in SSR Part -I, including dismantling of old tank .
S&F ball valves, high pressure,with polythene float and flynut complete, 20mm bore, fixed in repair.
S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends, fixed in repair.
S&F PVC connection 15 mm length 450 mm fixed, in repairs.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store.
M&L 15mm tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors.
Dismantling 150mm dia PVC pipes in any position.
M&L for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as soil pipe all as specified.
S&F 110mm PVC(SWR) bends.
M&L for 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as soil pipe all as specified.
S&F 75mm PVC(SWR) bends.
S&F PVC (SWR) floor trap dia of outlet 75mm with grating incl jointing with solvent cement fixed in repairs.
M&L Chequered cement concrete tiles (200x200x25mm) thick with grey cement and no pigment, set jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed of 1:6 cement mortar.
M&L Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey on 15 mm thick screed bed in cm 1:6 over 25mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded crushed stone agg).
S&F 2nd class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved and rebated other side and devetailed joints ,chamfered both side fixed to frame work with secret nailed as in wall panelling 15 mm including and beading as req and applying two coat of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed. Note -Frame wk shall be measured & paid separatly.
S&F lagging to 15mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool prefoRunning Metreed 'SNAPON' pipe section of density 144 Kg \Cubic Metre confoRunning Metreing to IS 9842 alongwith chiken mesh wire netting 25 guage , 20 mm mesh fixed in repairs.
Construction of 50 users septic tank (brick construction) including inlet and out let chamber with top of slab at ground level including necessary earth work and disposal of surplus soil to a distance not exceeding 50m supplying and placing vent pipe, in position to manhole cover brick construction and all other relevant works, complete, all as specified and shown on drawing No CESZ/TD-01/2015 Sheet 1/3 & 2/3 dated 22 Feb 2015 and revised on 06/06/15.
Construction of soakage well, excavation, in any type of soil, foundation in PCC 1:3:6 type C1, as in footing, wall of honey combed/ solid mansonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in Cement Mortar 1:4, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.6 m dia x 6m effective depth, all as specified and shown in Drg No. CESZ/TD- 01/2015 sh 3/3 dated 22/2/15 & revised on 06/06/15.
Salt glazed stone ware (SGSW) drain pipes of grade 'A' 150mm bore laid in trenches and jointed on concrete bed complete all as specified and directed.
Plain cement concrete bed 1:4:8 type D-2 using 40mm graded stone aggregate to drain pipes of 150mm bore including packing under hunching against the site of pipe after they are laid and tested.
Taking down copper/aluminium point wiring ( light fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) asd making good distribued surface of wall , floor etc complete all as specified and directed.
Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Disconnecting unserviceable sub main wiring / service connection of any size including steel conduit and accessories and removing from site and making good disturbed surfaces complete all as specified and as directed.
Taking down MCB DB's complete with MCB's / Isolator etc removing materials from site and making good distrubed surfaces of walls, floors etc complete all as specified and as directed.
Point wiring for 3 pin 5A socket outlet on the same board controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab.
Point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab.
Point wiring for one 3 pin 15 Amps socket outlet/sheet metal enclosure independent with 2.50 sqmm PVC insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC insulated un-sheathed copper conductor single core cable (green color) as earth lead in and including 25mm PVC caping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab.
Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor
Supply & fixing Switch socket combination 2 in 1, 5 and 6 Amp universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor/Philips.
Supply & fixing Switch socket combination 5 in 1, 5 and 15 Amp universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor/Philips.
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.
Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
Supply and fixing MCB SPN 63 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning.
Supply and fixing lamp holder bracket type, PVC/polycarbonate type with skirt cap suitable for batten fittings, complete all as specified and direted.Make : Havells/Anchor.
M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHFYBYG21N1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.
Supply & Fixing ceiling rose surface backelite 65x50mm two to three terminal (ISI marked).
M&L for submain wiring with two single core PVC FRLS insulated unsheathed flexible copper conductor cable of size 2.5 sqmm and one single core PVC FRLS insulated unsheathed flexible copper conductor cable green colour of size 1.5 Sqmm as earth lead in & including PVC casing and caping ISI marked and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge.
Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.
S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fix LED Bulb 9 Watt. Make Havells/Bajaj.
Taking down Old unserviceable tubelight at various locations and fixing only serviceable tubelight retrieved from taking down at same or another location and making good distrubed surfaces of walls etc complete all as specified and as directed.
M/S RJ BUILDERS
M/S AKHLAQ ENTERPRISES
MS SHEIKH NADEEM AKBAR
M/S MIR BUILDERS
AAKASH CONTRACTORS
M/S AB AHAD RATHER
G N T CONSTRUCTION CO
M/s Pall Constructions
Bidder Name
M/S RJ BUILDERS
M/S AB AHAD RATHER
G N T CONSTRUCTION CO
M/S MIR BUILDERS
M/s Pall Constructions
M/S GHULAM AHMAD BABA
MS SHEIKH NADEEM AKBAR
AAKASH CONTRACTORS
M/S AKHLAQ ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .