WORK OF PAINTING OF TRANSFORMER , FILTER MACHINE AND CHAIN LINK FENCING ALONG WITH REPAIRING AND REMOVAL OF CLIMBER / CREEPER PLANTS FROM CHAIN LINK SECURITY FENCING AT 220 KV S/S MOTIRAM ADDA, GORAKHPUR UNDER ELECTRICITY 400 KV S/S DIVISION, GORAKHP

Amount

Painting of complete surface of the chain link security fencing of height 2.40 meter including its MS Strip horizontal runner , MS Angle frames , MS Angle vertical uprights etc. around switchyard / store yard of the 220 KV S/s Motiram Adda, Gorakhpur by due rubbing with sand paper and wire brush , cleaning with thin cotton clothes and finally applying 01 coat of red oxide primer and then 02 coats of Black color 1st quality synthetic enamel paint Asian / Burger make at the gap of 48 Hrs. with all cost of men , materials , misc. consumables and T&P etc. required for the job ( NOTE:: The 2nd coat shall be applied when 1st coat of paint is done and checked by AE (M) / JE(M) concerned ).

Cutting and complete removal of climber / creeper plants climbed / twisted on 710 RMT Chain link security fencing of height 2.4 Meter before painting of the above chain link fencing , with all cost of men , misc. consumables and T&P required for the job.

Repairing of chain link security fencing of height 2.4 Meter by means of replacement of damaged MS Strip horizontal runner , MS Angle frame , MS Angle vertical uprights etc. as per requirement with all cost of men , T&P etc. (Electricity will be provided by the department for welding work as per site requirements.)

Outside complete painting of 01 No. 20 MVA T/F including main tank , radiators, headers , Main / OLTC conservator tanks , associated pipe lines , supports etc. after due rubbing and cleaning of the badly rusted surfaces , cleaning and washing of the dust / dirt / oil deposites from the surfaces then painting by 01 coat of red oxide primer and finally applying 02 coat of synthetic enamel paint in smoke gray by good quanlity brush and spray painting macine as per technical specification .

Outside complete painting of OLTC Panel of 20 MVA T/F after due rubbing and cleaning of dust / dirt deposites from the surfaces then painting by 01 coat of red oxide primer and finally applying 02 coat of synthetic enamel paint in smoke gray by good quanlity brush and spray painting macine as per technical specification .

Outside complete painting of 4.5 KL Oil Filter machine (CEE DEE make) after due rubbing and cleaning of dust / dirt deposites from the surfaces then painting by 01 coat of red oxide primer and finally applying 02 coat of synthetic enamel paint in Pale yellow color by good quality brush and spray painting macine as per technical specification and after the painting work is over the writing as per the direction of AE / JE incharge (i.e. Machine make , LOGO and other Important information and specification of M/C) with the help of proper size fonts by using paint and brush on the surface of filter machine .

M/S jai ambey traders

Harshit Enterprises

Vasu Associates