WELCOME MAINTENANCE AND CONNECTED B/R WORKS IN CERTAIN MD ACCN OFJCOs/ORs UNDER AGE B/R-I OF GE SATWARI

Amount

Notes : (1) Work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions. (2) The contractor shall have to get approve the work of srapping and preparation of surfaces (both internal and external) of the buildings as a stage from Engineer-in-Charge before carring out periodical services.

M&L for preparation of old decorated concrete/ plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceilings by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated concrete/ plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying one coat of oil bound distemper including making good uneven surface/holes with wall care putty (where ever required) complete all as specified and directed.

M&L for preparation of old decorated concrete/ plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper & applying two coats of oil bound distemper including making good uneven surface/holes with wall care putty (where ever required) complete all as specified and directed.

M&L for complete removal of existing treatment by scrapping down with sand paper of wall surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls & applying two coats of oil bound distemper over two coats of wall care putty of 1 mm thick each and one coat of primer complete all as specified and directed

M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth not otherwise described by grinding the uneven surfaces and necessary filling of putty (as and where required) to make surface even and smooth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described by rubbing with sand paper or grinding by hand grinder to make surface even and smooth & apply primer where required and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered/unplastered surfaces of walls & applying two coats of oil bound distemper over one coat of wall care putty 1mm thick & one coat of primer complete all as specified directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specied and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed

M&L for glazed ceramic coloured tiles,300x450x7 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 7 to 8mm thick non skid coloured ceramic tiles (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed.

M&L for 8 to 10 mm thick coloured ceramic tiles (square/ rectangular) , area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for 8 to 10 mm thick coloured ceramic tiles (square/ rectangular) , area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and n.exc. 2.00 sqm each and removing from the site complete all as specified & directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed.

M&L for granite work 16 to 18 mm thick (table rubbed and polished) in steps, jambs , pillars, window cills , cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed

S&F pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weight and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type B-1 including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.

S&F pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weight and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type B-1 including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.

S&F 30 mm thick 2nd class hard wood , glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers size of members of shutters as specified in SSR Part-I Section-8 clause 8.24 (a) fitted to chowkats complete all as specified and directed.

M&L for 30mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to distributed surface of walls complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification complete all as specified and directed.

Taking down of old/unserviceable kitchen cabinet/cupboard including all fixture and fitting, complete all as specified and directed. Note: For measurement superficial area in elevation shall be measured.

S&F factory made prelaminated solid 18mm(+0.7mm) thick celuka PVC foam ply,glossy finish, one side prelam and other side plain for kitchen cabinet shutter/Wardrobe/partition/shelf complete all as specified and directed .

S&F stainless steel designer handle ( heavy type) 125 mm size, fixed in drawers or shutters of cupboards complete all as specified and directed.

S&F Rolling channel plate for kitchen cupboards complete all as specified and directed.

S&F steel fasteners of size 75 mm long, drilled and fixed to walls complete all as specified and directed.

M&L for pressed steel cup board frame made out of MS sheet 1.25mm thick, size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:3:6 type C-1 as in filling to back of chowkats complete all as specified & directed.

M&L for prelaminated MDF board (exterior grade) 19 mm thick as in shutters /shelves , prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including lipping (15mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and directed.

S&F 100mm long stainless steel butt hinges, fixed with screws complete all as specified and directed

S&F aluminium anodised barrel tower bolts, 150mm long of extruded section, fixed to doors with screws complete all as specified and directed.

S&F aluminium anodised , fabricated type handle 100mm size fixed to doors with screws complete all as specified and directed.

S&F aluminum alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F 140mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed with welding complete all as specified and directed

S&F in repair aluminium anodised barrel tower bolts, 150mm long of extruded section, fixed to doors with screws complete all as specified and directed.

S&F in repair aluminium anodised , fabricated type handle 100mm size fixed to doors with screws complete all as specified and directed.

S&F in repair aluminum alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F in repair140mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed.

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed with welding complete all as specified and directed

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge with stainless steel brackets near to ends with stainless steel finials at both ends and necessary fittings complete all as specified and directed.

M&L for factory made box type steel windows/ventilators, double shutter,outer frame made out ERW TUBE 'P section (60x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) openable shutters side hung including pintle hinges with two nos MS tower bolts 150mm size on each shutter, steel handle and stopper of 'Z' section as specified complete with sash bars dovetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/opening for cooler/AC where required steel windows will be double shutter (external glazed and internal wire gauzed) complete all as specified in Drg No CEPZ/TD-324/07 of sheet No 1/3 to 3/3 complete all as specified and directed. Note: - The quoted rate shall be deemed to include :- (i) 04 Nos MS steel lugs of MS flat 20 x 5mm & 20 cm long over all welded to frames (ii) PCC block for embedding lugs.

M&L for framed work such as grills , gratings etc with ends of bars shouldered and /or riveted or forged into spikes , framed guard bars, barred iron doors, ladders, framed balusters: walk ways , railings frame work of water tanks and similar work confirming to Fe290, Gde E-165 complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frame including punching or drilling out old glazing pins/spring clips and fixing new ones complete all as specified and directed.

M&L for 3 mm thick, plain sheet glass, ordinary quality and glazing with glazing pins, oil putty or with any type of beads in squares n. exc 0.5 sqm each pane complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed .

S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed .

M&L for grubbing up vegetation, small trees from roots, clean the loose dirt with water and repair the same portion with cement mortar 1:3, touchup with same finish, area not exc. 0.10 sqm each adjacent to CI pipe upto 4th storey building with necessary scaffolding/ ladder complete all as specified and directed.

S&F in repair central hole basin mixer without popup waste system with 450mm long braided hoses, screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F in repair wall mixer 3-in-1 system with provision of overhead & hand shower complete with 115mm long bend pipe, connecting legs & wall flange fancy type complete all as specified and directed.

S&F in repair brass chromimium plated sink mixer swan neck with swinging spout (wall mounted model) with connecting Legs & wall flanges complete all as specified and directed. .

S&F in repair bib tap with flange, short body, chromium plated, fancy type, cast copper alloy ,screwed down, screwed for 15 mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair angle cock with flange,cast copper alloy , fancy type, chromium plated, screwed down for high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and dircted.

S&F in repair exposed part kit of concealed stop cock with fitting sleeve, operating lever & adjustable wall flange (compatible with ALD-069) complete all as specified and directed.

S&F in repair 15mm bore Stop valves, cast copper alloy,fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed , complete all as specified.

S&F in repair pillar tap, chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connectios and fixed in position complete all as specified and directed.

S&F in repair brass chromium plated tubular towel ring of 150mm dia, fixed with CP brass screws including plastic beads complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia, D type , 600 mm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass, shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair corner glass shelf of size not less than 30cm with Chromium plated bracket guard and railing fixed with and including screws and wooden/plastic cleats complete all as specified and directed .

S&F in repair waste coupling of chromium plated 32 mm dia with long screwed shanks and fly nuts suitable for wash hand basin complete all as specified and directed . .

S&F in repair waste coupling of chromium plated 40 mm dia with long screwed shanks and fly nuts suitable for wash hand basin complete all as specified and directed . .

S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends complete all as specified and direced.

S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends complete all as specified and direced.

S&F in repair brass chromium plated shower rose 125 mm of dia with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 630x450mm including cutting for and pinning in ends of brackets or erecting stand including cast iron brackets, brass chromium plated waste coupling 32mm bore, waste pipe PVC 32mm bore complete all as specified and directed

S&F in repair full pedestal for WHB complete all as specified and directed

S&F in repair 10 litres PVC, valveless, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float 32mm PVC 'L' bend and handle including brackets complete all as specified and directed

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover, white in colour with mild steel chromium plated hinges and 'P' or 'S' trap device complete all as specified and directed

S&F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rest, cast iron 'P' or 'S' trap of size 100mm, including provision of plain cement concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good the floors complete all a specified and directed

S&F in repair stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement complete all as specified and directed.

S&F in repair PVC waste pipe 32mm bore for sink/WHB of required length complete all as specified and directed

M&L for dismantling of water tank of capacity exc 500 ltrs but n. exc 1000 ltrs and removing complete all as specified and directed.

M&L for dismantling of water tank of capacity exc 250 ltrs but n. exc 500 ltrs and removing complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) with plastic lid cover, hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminum rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of 500 litres capacity (cylindrical vertical with closed top) with plastic lid cover, hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminum rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 25 mm bore pipe, including making connections complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 20 mm bore pipe, including making connections complete all as specified and directed.

Taking up or down steel tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and directed.

S&F Galvanised steel tubing, 15mm bore, medium grade with all fittings, fixed to wall/ ceiling or laid in floors complete all as specified and directed

S&F Galvanised steel tubing, 20mm bore, medium grade with all fittings, fixed to wall/ ceiling or laid in floors complete all as specified and directed

M&L for cutting (in brick walls) chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm girth complete all as specified and directed.

Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings and removing from site complete all as specified and directed

S&F UPVC (SWR) type B pipes, 110 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F UPVC (SWR) type B pipes, 110 mm bore, single socketed, in any length with rubber ring joints fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.

S&F UPVC (SWR) type B pipes, 75 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F UPVC (SWR) type B pipes, 75 mm bore, single socketed, in any length with rubber ring joints fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.

S&F UPVC (SWR) bends any radius, 75 mm bore complete all as specified and directed

S&F UPVC (SWR) bends with access door any radius, 75 mm bore complete all as specified and directed

S&F UPVC (SWR) bends any radius, 110 mm bore complete all as specified and directed

S&F UPVC (SWR) bends with access door any radius, 110 mm bore complete all as specified and directed

S&F UPVC branch piece, single (single 'Y') with access door for 75 mm bore complete all as specified and directed.

S&F UPVC branch piece, single (single 'Y') with access door for 110 mm bore complete all as specified and directed.

S&F UPVC (SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore complete all as specified and directed

S&F UPVC (SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore complete all as specified and directed

S&F UPVC (SWR) , reducers 110 mm dia complete all as specified and directed.

S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F in repair UPVC (SWR) floor trap plain with grating having diameter of outlet 75 mm including jointing with solvent cement to waste pipe, laid in cement concrete 1:2:4 type B-1 complete all as specified and directed.

S&F in repair UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L for water proofing treatment to RCC sunken slab as specified below and as directed by Engineer in Charge:- (a) Cleaning the surface with wire brush / coir brush, removing loose material like dust particles, dirt etc. (b) Rendering 15 mm thick in cement mortar 1:3 including mixing with liquid water proofing compound @200ml per bag of 50 Kg ,finishing even and smooth with steel trowel on sunken surfaces. (c) Creating fillet covering of 50 x 50 mm with polymer modified mortar on the junction of slab and wall (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surface. (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating. (f) Apply second coating of two component modified polymer coating after 72 hrs. (g) Laying concrete 1:4:8 over the coating as per requirement. (h) Joining the sanitary pipes with the waterproofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and sanitary pipe with non shrink cementatious grout. (k) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Note : (i) The treatment shall be carried out as per the manufacturers instructions and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment.

M&L for plain cement concrete 1:5:10, type E2 (using 40mm graded crushed stone aggregates) as in mass filling in sunken floor of toilets complete all as specified and directed.

M&L for steel water tubing of 40 mm bore,medium grade,galvanised, laid in sunken floors as spout complete all as specified and directed.

S&F in repair continuous (piano) hinges,30mm width, heavy duty, mild steel ,bright finish or electrogalvanised suitable for 19mm thick shutter complete all as specified and directed.

M&L for capillary rise treatment of walls with following specification:- Base coat: Berger HS Latex plus or equivalent in make specified in PS Consumption base coat: 0.3 kg/m2 Second and Third coat: Latex sheild 2K or equivalent in make specified in PS Consumption top coat: 3 kg/m2 System requirements: density: 2.00 kg/ltr compressive strength: 0.5 N/mm2.

Demolition of brick work or stone/boulder masonry , built in cement mortar or cement lime mortar including all quoins, arches & pillars etc of any description and in any position and removing unserviceable material from work site to outside defence premises complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius , built in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No -119 here-in-before but except bricks complete all as specified and directed.

M&L for brick work with old size sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed .

M&L for plain cement concrete 1:2:4 ,type B1(using 12.5mm graded crushed stone aggregates)as in lintels upto 1.5m clear span, window or door cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings,side posts of precast jallies etc. including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.

Demolition of cement concrete (un-reinforced) ground floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish out side defence premises complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 , type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. surfaces finished even and fair including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:2 complete all as specified and directed .

M&L for providing precast cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in louvers and jallies, 40mm thick (measured solid) including all moulding but excluding frame and set in cement mortar 1:4 including taking down the existing one complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregates) as in sub base of floors, finished even and fair complete all as specified and as directed by Engineer-in-charge.

M&L for machine pressed chequered cement concrete tiles 30cmx30cmx25mm thick, polished with grey cement and pigment, set , jointed and pointed in neat cement slurry as in floors, laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

S&F in repair sinks , made of 1mm thick stainless steel,overall size of sink 610mm x 460mm with bowl size 560mm x 410mm x 200mm, plugs, washers, waste pipe , union, CP waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed.

S&F in repair sinks with drainnage board , made of 1mm thick stainless steel,overall size of sink 915mm x 460mm with bowl size 410mm x 330mm x 160mm, plugs, washers, waste pipe , union, CP waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed .

M&L for repairing of concrete surfaces such as balcony, chajjas, upward or downward facia , column, pillar, ceiling and similar items of width n. exc 200 mm with plain cement concrete 1:2:4 type B-0 (using 12.5mm thick crushed stone aggregates) or with 15mm thick rendering in cement mortar 1:3 without using extra cement,surface finished even and fair (as per site requirement) complete all as specified and directed. (Note:- Quoted rated shall be deemed to include:- (i) formwork and scaffolding required & taking down or dismantling as per site requirement (ii) The work is to be executed upto 4th storey building

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided and removing the rubbish from the work site out side defence premises complete all as specified and directed.

M&L for RCC 1:1.5:3 (nominal mix) type A1 (using 20 mm graded crushed stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed .

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for use and waste of form work to softfits of suspended slabs such as roof slabs , floor slabs , landings and similar work, not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.

M&L for use and waste of form work to edge of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls , floor and roof and not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or slopping and similar work exc 10cm but n. exc 20 cm wide for fair finished surfaces of concrete complete all as specified & directed.

S&F in repair aluminium bottom door seal with brushes of length not less than 0.80 m and fixed with screws to door complete all as specified and directed.

S&F in repair 15mm bore Bib taps, long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair two way angle valve with flange,cast copper alloy , fancy type, chromium plated, screwed down for high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and dircted.

S&F in repair ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed.complete all as spd and direcetd.

S&F in repair chromium plated, jet nozzle with 600mm long PVC connection for EWC including fixing device complete all as specified and directed .

S&F in repair plate rack made of 1.0mm thick stainless steel of size 90x90x25 cm fixed with steel fastners or steel screws complete all as specified and directed

S&F in repair PVC syphon with knob for PVC flushing cistern of 10 Ltr of capacity complete all as specified and directed .

S&F in repair Bib tap 15 mm bore,standard of PTMT, any colour, high pressure, screwed for iron pipe and fixed (Min weight 90 gms) complete all as specified and directed

S&F in repair Bib tap long body 15 mm bore, fancy type, standard of PTMT, any colour, high pressure, screwed for iron pipe and fixed (Min weight 105 gms) complete all as specified and directed

M&L for repair to steel gates/ Garrage gates ( including slot pin, pintol hinge, Ball bearing, hook and eye of standard quality where required, resecuring of MS plates/sheets and guard bars / grills by using welding equipments complete all as specified and directed.

M&L for Cleaning of CP fittings with limescale removal & other material as required complete all as specified and directed

M/S SHAKTI STEEL INDUSTRIES (BID ID -3299160)

THAPA TRADERS (BID ID -3298785)

M/S ANIL MAHAJAN (BID ID -3304573)

M/S Shesh Paul Gupta (BID ID -3298919)

M/s Sunny Builders (BID ID -3303932)