Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.8 LAccepted-AOC 00 BAJRANG CHOK MAHOBA MAHOBA UTTAR PRADESH 210427 | MAHOBA | UTTAR PRADESH | 210427 | L1 | Accepted-AOC Accepting being L1 | |
| 2 | L2₹47.9 L+₹4.6 L (10.7%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹47.9 L+₹4.7 L (10.8%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹96,000
Closing Date
17 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY NO. 1 JODHPUR
GE ARMY NO. 1 MULTAN LINES ARMY AREA JODHPUR
SPL REP OF BLDG NO P-81 (HQ LINE) OF MECH INF (MADRAS) AND PROVN FOR FACILITY OF STAND FOR TESTING DISTRIBUTION MECHANISM IN CORPS ZONAL WKSP AND PROVN OF STAIRS IN BLDG NO P-1772 AND P-1776 AT WARCEN IN THE AREA OF AGE B/R-II UNDER GE ARMY NO.1 JODH
2023_MES_619447_1
GE/JODH (A) NO 1- OF 2023-24 (9188/E8)
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE ARMY NO. 1
₹96,000
Yes
17 Nov 2023
18 Sept 2023
24 Oct 2023
18 Sept 2023
17 Oct 2023
3 Oct 2023
Amount
S&F 1000 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, including taking down old u/s existing tank complete all as specified and as directed.
Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.
All as per item No 2.00 here-in-above, but size of pipe 20 mm bore.
Supplying, laying, testing & commissioing of CPVC pipes 20 mm outer diameter SDR 11 & Plain or brass CPVC SDR 11 fittings, laid in trenches, complete all as specified and as directed.
All as per item No 4.00 here-in-above, but size of pipe 25 mm outer dia.
Demolition of cement concrete as removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, padding,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removal unserviceable materials, debris and rubbish to a distance out side MOD land complete all as specified and as directed.
M&L for plain cement concrete 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate), as in roof padding over roof for making good depression / undulation to make the existing as filling in depression of roof slab, complete all as specified & directed.
M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 2.00mm having weight not less than 3.00 Kg/Sqm, mineral gravel finish on top, using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding, including WPC as per manufacturer instruction. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.
Supply only integral water proofing compound ISI Marked all as specified.
M&L for rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.
Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling , sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as directed.
M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface.,complete all as specified and as directed.
M&L for 15 -20 mm thick rendering in CM (1:1:2) using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat. ,complete all as specified and as directed.
M&L for 10 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement ,complete all as specified and as directed.
S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc,complete all as specified and as directed.
Taking down cement plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified and as directed.
Racking out joints/ pointing to random rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed
M&L keyed pointing in cement mortar (1:3) to squared rubble masonry coursed or un coursed complete all as specified & directed by Engineer-in-charge.
M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.
M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of stone or brick work or concrete surfaces mixed with water proofing compound as per manufacturer instructions and finished the surfaces fair and even with out using extra cement complete all as specified and as directed. Note :- WPC will be measured and paid seperately.
M&L 10 mm thick rendering in cement mortar 1:4 on fair faces of stone on concrete surfaces of ceiling and finished the surfaces even and smooth with out using extra cement complete all as specified and as directed.
Complete removal of existing treatment from walls , complete all as specified and as directed.
M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.
M&L for preparation of old decorated ceiling surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on wall, complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces or old decorated surface of wall and applying with wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper (shade or tint as approved by GE) over & including one coat of primer on walls complete all as specified and as directed
M&L for preparation of new plastered or unplastered surfaces or old decorated surface of wall and applying two coats of exterior plastic emulsion (shade or pattern as approved by GE) over & including one coat of primer on walls, complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and directed.
M&L for 15 to 18 mm thick udaipur green stone slab (size as approved by GE), as in flooring, machine cut, (table rubbed and polished) best quality as per sample, including & over 20 mm thick screeding in CM1:4 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.
M&L for 18 to 20 mm thick (telephone black shade) granite stone, as in cooking plateform, oval type WHB counter, sink & etc. machine cut, (table rubbed and polished) best quality as per sample, including & over 20 mm thick screeding in CM1:3 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.
M&L for joint free non skid ceramic coloured tiles (premium quality) of size 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm (size & shape, shade and pattern as approved by GE), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.
M&L for machine cut kota stone slab 20 to 25mm thick in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:4 including dismantling of stone slabs of any description complete all as specified and as directed.
All as per item No. 32.00 here-in-above, but as in skirting/dado with 20mm thick backing coat in CM 1:3
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.
M&L PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in foundation , filling, sub base and mass concerete complete all as specified and as directed.
M&L 50 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval, complete all as specified and directed.
M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), as in base course, to receive floor finishes, complete all as specified & directed.
M&L for glazed colour ceramic tiles (premium quality) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3), (including Highlighter pattern), complete all as specified and directed.
S&F in replacement bib cock (Brand-I) with wall flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed.
All as per item No. 39.00 here-in-above, but angular stop cock
Demoliation of existing WC/sunken floor including PCC/ tile flooring, traps attached to WC , lean concrete, plaster and and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar (1:4) on wall/floor surfaces of sunken floor finished even and smooth with using WPC as per manufacturing instruction including cleaning the surfaces of sunken floor using wire brush, brooming down and washing down with water to remove dust etc. complete all as specified and directed.
M&L 50 micron polythene film pasted with the help of suitable adhesive as in WPT on sunken floor, complete all as specified and directed.
M & L for PCC (1:5:10) type E2 with using 40 mm graded crushed stone aggregates as in sunken floor work, complete all as specified and as directed.
S&F in repairs vitreous china squatting pan "orissa" pattern, size 580 x 440 mm, Ivory(Brand-I), with integral foot rest (Excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe,anti- syphonage pipe, complete all as specified and as directed.
S & F in repairs Gun metal globe or gate valve, 20 mm bore with iron wheel head, screwed both ends for iron pipe, complete all specified and as directed.
S & F in repairs over head shower rose 150X150mm square shape single flow ,body and face plate CP brass, arm 300mm long joiting to pipe complete all as specified and as directed.
S & F in repairs stop valves, 15 mm dia, cast copper alloy with capstan head,, screwed down high pressure with crutch or butterfly handle with long shank and cup [concealed type] for iron pipe etc complete all as specified and as directed.
S & F in repairs 75mm bore cast iron nahani trap with grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and as directed.
S & F in repairs vitreous china ware wash hand basin, Ivory (brand-I), flat back of size 550 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long, complete all as specified and as directed.
S&F in repairs vitreous ware wash down water closet [Pedestal Pattern], Ivory (brand-I), [ETWC] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and as directed.
Supply only in repairs 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed. Note:- The colour of the cistern shall be as matching with the colour of the EWC/WC Pan
S&F in repairs vitreous china urinal, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including urinal spreader, CI Brackets, 32mm bore PVC flexible waste pipe, grating and union for discharge pipe, CP screws etc complete all as specified and as directed.
S&F in repair corner sheet glass superior quality of 6mm thick, 200mm to 250mm size, as in shelf, with CP tubular framing & brackets, fancy type, triamgular in shape and one side circular, as per sample, complete all as specified and directed.
S&F in repair corner sheet glass superior quality of 6mm thick, 300mm size, as in shelf, with CP tubular framing & brackets, fancy type, triamgular in shape and one side circular, as per sample, complete all as specified and directed.
S&F in repair 5-6 mm thick, bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers etc complete all as specified and as directed
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D Type, 600 mm long between flanges including brackets complete all as specified and as directed.
S&F in replacement 75mm dia PVC (SWR) pipes single socketed, in any length with or without ears with cement joints, laid in trenches or in floors or fixed to wall and including old u/s demolation drain/PVC/CI pipe ,complete all as specified and as directed
All as per item No. 58.00 here-in-above, but size of pipe is 110 mm bore.
S&F in replacement 75 mm bore PVC (SWR) bends any radius with/with out oval acess door compete all as specified and directed
S&F in replacement 110 mm bore PVC (SWR) bends any radius with/with out oval acess door compete all as specified and directed
S& F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and as directed.
S& F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and as directed.
S & F 75mm bore PVC [SWR] Floor Trap with grating including jointing to waste pipe fixed with solvent cement, and making floor good ,complete all as specified and as directed
S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed.
Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.
Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.
Taking down of steel windows/vents with all fittings complete carefully & removal away from store, complete all as specified and directed.
M&L for factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified (with or without cooler opening as directed by engr-in-charge) Note:- Glass panes, grill and wire cloth shall be measured and paid seperately.
All as per item No. 69.00 here-in-above, but without glazing bar.
S&F factory made steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified & directed by Engineer-in-charge.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty/aluminium with rubber beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
S&F 3.00 mm thick frosted/figured glass,pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed.
M&L factory Made flush shutters, 35 mm thick solid core with block board core construction as per IS 2202(part-I, 1999), both side commercial type. The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 30mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.
M&L 30mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded wood grain printed PVC sheet PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) and jointed together with solvent cement complete all as specified & directed.
S&F solid PVC Door Frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet incl all edges printed to match the shade reinforced with M.S. Sq tube, suppling & fixing in opening, complete all as specified & directed.
S&F 150 mm size aluminium anodised barrel tower bolts of extruded section complete all as specified & directed
S&F for 100mm size, butt hinges, stainless steel including necessary welding if required complete all as specified and as directed.
S&F for 150mm size extruded aluminium alloy handles, D type, fabricated type, anodised complete all as specified and as directed.
S&F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or SS staples complete all as specified and as directed.
M&L preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L single coat of red- oxide, zinc chrome primer complete all as specified and as directed.
M & L for preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed .
All as per item No. 13.00 here-in-above, but steel surfaces.
M&L 75 mm thick PCC 1:4:8 type D-2 using 20mm graded crushed stone aggregate, as in sub base of floor incld. compaction properly & universal and laid to level, complete all as specified and directed.
Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any description, ( colour, design & pattern, & size/ shape, as approved by GE) as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
M&L for chequered cement concrete tiles 30cm X 30cm X 20 to25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry as in floors/ path etc over and including 20mm thick screed bed in CM 1:6, complete all as specified and as directed.
Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies & shelves and the like including demolition of existing RCC, complete all as specified and directed.
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.
M&L for form work to soffits of flat, rough finished surfaces of concrete of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick(Horizontal or sloping)
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in any type of soil ,complete all as specified and as directed.
Returning, filling in,including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft loose soil ,complete all as specified and as directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.
M&L PCC 1:3:6 type C-2 by using 40 mm graded crused stone aggregate as in bed to 150 mm bore salt glazed stone ware drain pipe including packing under and haunching against the side of pipe after they are laid and tested complete all as specified and as directed .
S&F 150 mm bore Salt glazed stone ware drain pipe laid in trenches and cement joint in cement mortar 1:1 complete all as specified and as directed.
Demolition of brick / block or stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed.
M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.
Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed.
S&F 5 cm thick machine cut sand stone slabs Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4) complete all as specified & directed
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting, exceeding 10 cm but not exceeding 20 cm girth complete all as specified and as directed.
M&L for rolled mild steel confirming Fe-290 (Gde E-165) in door or gates of angle other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (inclding of steel, sheeting or other covering ) rectangular hollow sections. Solid Sq Bars, Flat iron, MS Channel sections , or hollow structural tubes etc incl necessary cutting & bending to shape & welding together complete as in gates , cattle traps , overhead trusses , railings etc as per the design & patterns complete all as directed and hanging also fastening and fixing complete all as specified and as directed.
Excavating in post holes or similar holes each not n exc 0.50 cu.m,getting out any type of soil, returning,fillig in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and as directed.
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets,fittings etc., removing materials to store for keeping in safe custody or for taking credit and including cutting, chasing, pinning & making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.
Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and including cutting, chasing, pinning & making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.
Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing caping including earth wire and including cutting, chasing, pinning & making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.
M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits), with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, including cutting, chasing, pinning & making good disturbed surfaces of walls,floors, etc, ISI marked with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed . Note:- surface conduit shall be laid in ceiling portion only.
All as per Serial Item No.107.00 here-in-above but for one 3 pin socket outlet 5/6 Amps on the same board with other switches.
All as per Serial Item No.107.00 here-in-above but for one 3 pin socket outlet 5/6 Amps on the independent board with other switches.
All as per serial Item No. 107.00 here-in-above but controlled by two way switch
All as per serial Item No. 107.00 here-in-above but for 15 Amp point on independent board with 2.50 Sqmm cable
S&F piano type Switch 1 way, 6 Amps, 1 module, 230 Volts complete all as specified and as directed.
S&F piano type Switch 2 way, 6 Amps, 1 module, 230 Volts complete all as specified and as directed.
S&F piano type Switch 1 way, 16 Amps, 1 module, 230 Volts complete all as specified and as directed.
S&F piano type Socket, 6 Amps, - 2/3 pin combined 2 module, 230 Volts complete all as specified and as directed.
S&F piano type Socket, 6 /16 Amps, - 2/3 pin combined 2 module, 230 Volts complete all as specified and as directed.
S&F piano type fan step regulator, 120 W - 2 module complete all as specified and as directed.
S&F lamp holder, PVC / polycarbonate type with back plate suitable for batten fitting, INCLUDING 9W LED Lamp complete all as specified and as directed.
S&F piano type Ceiling rose, surface bakelite, 3 terminal, 3 phase / PVC / Polycarbonate, isolated body complete all as specified and as directed.
Supply & replacement of LED tube rod ( integrated driver), 6000K colour temp, 4 feet long of 20 watt ( PC) in existing tube light fitting, including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
S&F in replacement bldg security LED Light Luminaire of 35 Watts having IP 65/66 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 160-260 Volts with in built surge protectore, toughened glass with and including GI pipe 32mm dia bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and directed.
Supply & replacement of LED light mirror type with high diffuser, 2 feet long of 10 watt ( PC) fitting, including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
Supply & replacement of LED tube rod ( integrated driver), 6000K colour temp, 2 feet long of 20 watt ( PC) in existing tube light fitting, including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
Taking down ceiling fan, any size and sweep from its position ,dismantling for including spray painting of ceiling fan, fan blades, down rod, canopy etc with two coat of synthetic enamel paint of approved colour and quality and marking MES No. etc with black paint, complete all as specified and as directed .
S&F Vertical Distribution Board, double Door, suitable for 'A' Frame, incorporating 4 Pole MCCB 100 A to 250A, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, as in replacement, including taking down old u/s material, complete all as specified and as directed. Note:- MCCB's and MCB's measured and paid seperately.
S&F MCCB, 'A' Frame, thermal adjustable magnectic setting, Ics = 75% 25 kA, 415V, 100 Amp, 4 Pole with over load and short circuit protection (ISI marked), as in repairs, complete all as specified and as directed.
Supply, fixing, testing and commissioning SPN 40 Amps 240V 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.
Supply, fixing, testing and commissioning SPN 63 Amps 240V 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.
Supply, fixing, testing and commissioning SP 6 to 32 Amps 240V 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.
S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar, SPN 12 way, 240V, IP-43 and IK 09 Protection, duly fixed in concealed in wall including cutting chasing pinning, and making good, suitable for for fixing MCB's complete all as specified and as directed.
S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar, SPN 8 way, 240V, IP-43 and IK 09 Protection, duly fixed in concealed in wall including cutting chasing pinning, and making good, suitable for for fixing MCB's complete all as specified and as directed.
M&L submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including cutting chasing in wall for concealed using machine cutting and making good and including M&L 25mm dia non mettalic PVC rigid conduit with wall thickness not less than 1.8 mm, accessories concealed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly, and including cutting, chasing, pinning & making good disturbed surfaces of walls,floors, etc, complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.
Supply,testing and installation of electric storage geyser of capacity 25 Ltrs, BEE 5 Star rating, 230Volts, AC, 50Hz, storage type steel body with copper inner tank, comprising of heating element 2000 watt, puff insulation, both power indicating LED lamp and heating indicating LED lamp neccasry suitable 3 core copper cable,suitable plug top, inlcluding supply and fixing of inlet and out let connection to geyser with steel grip,chromium plated PVC connection of 600mm in length - 02 Nos (one for inlet GI pipe and other one for outlet connection) suitable to connect inlet GI pipe 15mm dia and out let GI pipe 15mm dia (out let PVC connection should be capable to withstand the designed temparature of Geyser) and geyser shall be fixed on wall surface with wall mount bracket and 10 cm anchor bolts as required, complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. inclduing all necessary plumbling works and civil works complete all as directed and as specified.
M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991)incl dismanteling of existing unserviceable earth pit all as specified and directed by Engr-in-Charge.
Supply, laying, testing & commissioing of cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.50 core including taking out old unserviceable cable if required., complete all as specified and as directed.
Supply and filling dry clean sand (tibba sand) in trenches for cushioning of underground cable and punning for cushioning to cable complete all as specified and directed . Note :- Punned thicknes only shall be measured for the purpose of payment.
Supplying and laying un-reinforced precast concrete cable cover, class LV, Type I, flat, size 300 mm x 180mm x 40mm complete laid over the cable perpendicular to the cable for protection, complete all as specified and as directed.
Supply and fix in replacement of GI tubing of size 40mm bore, medium grade for protection of cables on poles / under road crossing complete all as specified and as directed.
Supply, laying, testing & commissioing of cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 Sqmm 3.50 core including taking out old unserviceable cable if required., complete all as specified and as directed.
Supply and fix in replacement of GI tubing of size 50mm bore, medium grade for protection of cables on poles / under road crossing complete all as specified and as directed.
Boring / drilling by mechanically under the road in any type of soil with out cutting / disturbing the existing road and inserting GI pipe of 40/50/80 mm bore pipe, for drawing the cable complete all as specified and as directed.
Supply, fixing, testing and commissioning TPN 63 Amps 415V 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.
S&F 500 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, including taking down old u/s existing tank complete all as specified and as directed.
Supply, Installation, testing & commissioing factory assembled pump with 3 HP electric motor, 3 phase, 1440 RPM, 50 Hz, pressure rating upto 4 bar, including mounted on MS frame, PCC 1:3:6 foundation of size 600X600X300mm for Pump and covered shed with PPGI sheets fabricated on MS angle iron (50X50X3mm) size frame and 40 mm GI header for 1 incoming & 2 outgoing, complete all as specified and as directed. Note:- Quoted rate is deemed to be inclusive of all connected work which are mentioned in item description.
Supply, laying, testing & commissioing of cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded copper conductor of size 4 Sqmm 3.50 core including taking out old unserviceable cable if required., complete all as specified and as directed.
Supply, Installation, testing & commissioing outdooer type 3 Phase, DOL stater upto 3 HP /2.5 KW with control panel including all acessoseries like power wiring, volt, Amp meter, phase indicator, with over load relay, complete all as specified and as directed.
S&F GI water tubing medium grade, 20 mm bore size, galvanized, with all fittings fixed to wall, ceilings or laid in floors, including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.
All as per item No. 134.00 here-in-above, but 32 X 6 mm size GI strip
All as per item No. 126.00 here-in-above, but MCCB capacity 160 Amps, 36 KA.
All as per item No. 126.00 here-in-above, but MCCB capacity 250 Amps, 36 KA.
NOTE:- (i)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 43 of tender document. (ii)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount
M/s SAAR ENGINEERS
M/S SUMAN ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .