WELCOME AND DAY TO DAY MAINT TO MD AND OTM BUILDINGS AT ICGAS DAMAN

Amount

M&L for preparation of old decorated surfaces and applying one coat of white wash on walls complete all as specified and as directed.

M&L for preparation of old decorated surfaces and applying one coat of white wash on ceiling surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment and preparation of surfaces including filling of the holes/cracks on walls with plaster putty and applying two coats of oil bound distemper paint on walls over a coat of alkali resistant primer etc complete all as specified and as directed .

M&L for preparation of old decorated plastered or unplastered wall surfaces and applying one coat of oil bound distemper white or tinted including filling of the holes/cracks with wall care putty and finished as required complete all as specified and directed.

M&L for preparation of old painted wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated surfaces and applying one coat of plastic emulsion paint on walls complete all as specified and as directed .

M&L for complete removal of existing treatment , preparation of surfaces including filling of the holes/cracks on walls with plaster putty and applying two coats of plastic emulsion paint on walls over a coat of primer etc complete all as specified and as directed.

Dismantiling floor hearth/wall tiling/skirting/dado etc including cement mortar bedding (but not backing) and removing rubbish out off the premises all as specified and directed.

M & L for Resecuring or easing & adjusting without taking down shutters of any description exc 1.00 sqm not exc 2.00 sqm each complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description from wooden/metal frames) glazed with putty or fixed with beads or screws etc complete all as specified and as directed.

Taking down shutters only of any description exc. 1.00 Sqm not exc 2.00 Sqm each etc complete all as specified and as directed .

Taking down Chowkhats or frames not exc. 1.5sq. m each etc complete all as specified and as directed .

Demolition of plain cement concrete unreinforced in any position n exc 15 cm thick and removal of the same outside MD land etc complete all as specified and directed.

M&L 100 mm thick cement concrete type C-2, 1:3:6 using 40 mm graded stone aggregate as sub base.

S&F float glass 4.8 mm thick and area exc 0.5sqm each pane (cost of jhulla system included) fixed with rubber gaskets in sliding aluminium window shutters or with oil putty in wooden/steel windows etc complete all as specified and as directed.

S & F sheet glass 4 mm thick pin headed /figured glass fixed with rubber gaskets in aluminium ventilators or fixing with oil putty in steel/wooden ventilators in square not exc 0.5 Sqm in each pane (cost of using Jhulla system is included) fixed at any position including all necessary fittings etc complete all as specified and as directed.

S&F for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles over 20 mm screed bedding in cement mortar 1:4 complete all as specified and directed.

All as per item above but on vertical surfaces such as skirting / dados including 15 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed.

S&F for glazed ceramic coloured tiles 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed.

S&F for vitrified coloured tiles of 9-10 mm thick (square / rectangular) area of each tiles not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles over 15 mm screed bedding in cement mortar 1:4 complete all as specified and directed.

All as per item above but on vertical surfaces such as skirting / dados including 15 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed.

M&L 18mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified and as directed .

M&L for 6mm thick teak wood lipping fixed with nails etc complete all as specified and as directed .

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface etc complete all as specified and as directed .

M&L for 0.9mm thk Decorative laminate type I of surface finish ,colour and pattern as approved fixed with approved adhesive all as per makers instructions and etc complete all as specified and as direted.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and as directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) considting of frame made out of MS tubes for top & bottom rails, MS frames shall covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both sides prelaminated PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling, of both sides prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading, and jointed together with solvent cment, styles and rails feathered at edges, supplying & fixing in the frame at site as per specification and drawing.

S & F stainless steel butt hinges medium weight 75 mm size in any position all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 100 mm long fixed in any position etc complete all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 100 mm long fixed in any position etc complete all as specified and as directed.

S & F 100 mm size aluminium anodised hasp & staples fixed with screws etc complete all as specified and as directed.

S&F 30mm thick Flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both sides etc complete all as specified and as directed .

S&F 30 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass and gauze etc but divided into squares with plain ,chamfered or rounded, metred and rebated sash bars any numbers as specified in SSR part I section 8 , clause 8.24 (a) to fitted to chowkhats.

S & F stainless steel butt hinges medium weight 100 mm size in any position all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long fixed in any position etc complete all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 150 mm long fixed in any position etc complete all as specified and as directed .

Supply and fix 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding of extruded sections or cast aluminium alloy etc complete all as specified and as directed .

S&F aluminium alloy body and tongue, anodised Floor door stopper 150 mm long with hard drawn spring fixed in any position etc complete all as specified and as directed .

M&L for preparation of new wood surfaces of any description exc 10cm width or girth and applying two coats of synthethic enamel paint over a coat of pink primer etc complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S & F in repair concealed type locks suitable for aluminium sliding windows of approved colour and pattern and fixed as directed etc complete all as specified and directed.

S & F in repairs Nylon ball bearings fixed to aluminium sliding windows of approved make and pattern etc complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples on exisitng wooden beading etc complete all as specified and directed.

S & F in repairs 20 mm dia Aluminium Powder coated curtain rods cut to lengths as required and fixed including brackets as directed etc complete.

S& F in repairs 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding of extruded sections or cast aluminium alloy etc complete all as specified and as directed.

S&F in repairs aluminium anodised barrel tower bolt of extruded section 100 mm long fixed in any position etc complete all as specified and as directed.

S&F in repairs aluminium anodised barrel tower bolt of extruded section 200 mm long fixed in any position etc complete all as specified and as directed.

S&F in repairs extruded aluminium alloy handle fabricated type anodised 100 mm long fixed in any position etc complete all as specified and as directed.

S&F in repairs extruded aluminium alloy handle fabricated type anodised 150 mm long fixed in any position etc complete all as specified and as directed.

S&F in repairs aluminium alloy body and tongue, anodised floor door stopper 150 mm long with hard drawn spring fixed in any position etc complete all as specified and as directed.

S & F in repairs 100 mm size aluminium anodised hasp & staples fixed with screws etc complete all as specified and as directed by.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished etc complete all as specified and as directed .

S&F in repair stainless steel chromium plated round knob door lock with all fittings etc complete all as specified and directed.

S&F in repairs standard size EWC white colour with P/S trap white coloured with and including PVC white coloured seat cover including all and connecting to flushing cistern complete all as specified and directed.

S&F in repairs vitreous china orissa pattern water closet white in colour with integral foot rest P/S trap and of size 580mmx440mm all as specified and as directed.

S&F in repair vitreous china WHB flat back size 550x400 mm& supply only pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes including cutting for and pinning in ends of CI brackets and making good wall or floor fitting to match existing complete all as specified and as directed.

S&F in repair vitreous china, 1st quality urinal half stall type, white, with and including brass chromium plated flush pin, 40mm dia brass CP waste coupling and 40mm dia PVC HDPE waste pipe with all other necessary fittings etc complete all as specified and directed.

S&F in repairs 10 ltr capacity low/high level PVC flushing cistern (dual flush) with and including syphon assembly handle, ball valve, PVC inlet and out let pipe complete all as specified and directed.

S&F repair fancy type chromium plated brass (long body) bib tap 15mm complete at any position etc complete all as specified and as directed.

S&F in repair chromium plated brass bib tap 15mm complete at any position etc complete all as specified and as directed.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm dia pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes etc complete all as specified and directed.

S&F in repairs 15mm size Stop Valves chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends etc complete all as specified and as directed .

S&F in repairs 15mm size concealed Stop Valves chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends etc complete all as specified and as directed.

S&F in repairs 15 mm fancy type heavy weight chromium plated mixer valve with crutch or butterly handle, screwed down for iron pipe or brass ferrule and provision for overhead shower etc complete all as specified and directed. (Make: Prayag)

S&F in repairs Health Faucet with 1 meter CP flexible tube & hook and with all necessary fittings etc complete all as specified and directed. (Make: Prayag)

S&F in repairs 2 way bib cock double handle with flange and all necessary fittings all as specified and directed. (Make: Prayag)

S&F in repair D type towel rail 600mm long PTMT fixed with and including chromium plated brass screwes and wooden/plastic cleats complete all as specified and directed.

Supplying & Fixing in repair , stainless steel plate rack standard size 31X36X10 inch ,complete and fixing with rawl plug and steel screws , complete, all as specified and as directed . (Make : Prayag Cat No. P-348 or equivalent model in HINDWARE/SHAKTI/ Blue star

S&F in repair glass shelf 500x125x60mm (with ABS brackets) etc complete all as specified and as directed.(Make: Prayag)

Supply and fix in repair PVC seat cover for EWC white in colour, solid body, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union 15mm bore complete all specified and directed.

S&F in repairs bathroom shelf of PTMT fixing with and including chromium plated brass screws and wooden plastic cleats (minimum weight 300gms) to plastered/tiled walls etc complete all as specified. (Make: Prayag)

S&F in repair standard quality stainless steel toilet paper holder omplete all as specified.

S&F in repairs grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F in repairs waste coupling 32mm brass chromium plated ISI for WHB/sink complete all as specified and directed .

S&F in repairs waste coupling 40 mm dia brass CP for kitchen steel sink complete all as specified and directed.

S&F in repair white colour PVC drain pipe long socket waste pipe for wash basin / kitchen sink water outlet complete all as specified and directed. (Make: Prayag)

Servicing of low level flushing cistern, sealing of flush pipe joints and making the cistern fuctional duly checking of alignment of its fittings and fixtures all as specified and directed .

M&L for unscrew and refix the bib tap, pillar tap, stop cock 15mm bore and replacing the wornout washers/spindle etc and making leak proof all as specified and directed.

Labour only for unscrewing of existing GI pipe 15 mm/20 mm externally fixed to wall including taking from wall for removing air lock or any blockage and refixing in position and making leak proof joints complete all as specified and directed. (Note : The rate shall include Jhulla system with rope).

Taking down GI tubing and connection 15mm dia including cleaning of serviceable pipe for reuse and removal of unserviceable tube from work site all as directed.

S&F 15 mm dia bore medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed.

Taking up or down 20 mm bore dia Steel Tubing and connecions fixed to walls or laid in floors/ trenches etc complete all as specified and directed.

S&F 20mm dia bore medium grade galvanised steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. (Make: Prayag)

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.(Make: Prayag)

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 750mm complete all as specified and directed.(Make: Prayag)

S&F in repairs GI medium grade Tee 40x15mm complete all as specified and directed.

S&F in repairs GI medium grade nipple for 40mm bore of pipe complete all specified and directed.

S&F in repairs GI medium grade nipple 50mm bore of pipe complete all specified and directed.

S&F in repairs GI medium grade Unions for 40mm bore of pipe complete all specified and directed.

S&F in repairs GI medium grade Unions for 25mm bore of pipe complete all specified and directed.

S&F in repairs GI medium grade Reducer 40x25 mm bore of pipe complete all specified and directed.

S&F in repairs GI medium grade Reducer 50x40 mm bore of pipe complete all specified and directed.

S&F in repairs Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 60 to 80 Kgs.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty etc complete all as specified and directed .

Nakshatra Enterprises

Charulata Construction