STATION WORKS

Amount

PIPING WORKS

FABRICATION, ERECTION, INSTALLATION AND TESTING OF PIPING: Receiving and taking over of all Owner supplied materials from Owner's designated place(s) of issue,transportation including loading, unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials (except those specified subsequently in SOR), equipment, consumables as defined in Contractor's scope of supply and their transportation to the work site(s); performing all above ground/buried piping fabrication works including cutting, edge preparation (inclusive of grinding the edges of pipes, fittings, flanges etc. to match with the matching edges of uneven/ different thickness wherever required), fit up, bending, pre-heating wherever required, welding, threading etc.; erection of pipes of all types and thickness over sleepers, in trench to required depth including backfilling, overhead on racks and at all elevations; hook-up with equipment nozzles; installation of all type of valves up to size of 1.5" NB, all types of inline and online instruments such as pressure/thermal safety valves(other than those covered separately), fittings of all sizes i.e. IJ, Flow Tee, Pig Signaller, elbows, reducers, tees, 'o' lets, flanges, blind flanges, spectacle blinds, tappings for pressure gauges, thermowells, hoses and hose couplings of all sizes, if applicable, sample connections, flame arrestors as applicable, vents and drains required for process and hydrotesting purposes etc. including fixing of all types of gaskets , bolts, studs and nuts of all sizes; carrying out non-destructive testing (excluding radiography covered subsequently in SOR) such as magnetic particle/ liquid penetration etc. as required; hook-up with existing piping/pipeline installed by others as per drawings wherever required; cleaning and flushing by water/ compressed air, carrying out hydrostatic test, pneumatic test, valve functional test and any other type of testing as specified, depressurising, dewatering, drying by compressed air if applicable; cutting/ rebeveling (as required), precommissioning and providing commissioning assistance to Commissioning Contractor/Agency for process piping and commissioning of non-process piping if applicable; clean-up and restoration of site, preparation of as built drawings, documents and project records; transportation of surplus free issue materials to Owner's designated place(s); completing all works in all respects as per the AFC drawings, specifications, standards and other provisions of Contract and instruction of Engineer-in-Charge. Note :- a.) All items fittings, flanges, valves, pipes below 2" shall be supplied & installed by the contractor under this item, Contractor to quote accordingly. b.) All bolts, nuts, gaskets of all size shall be supplied & installed by the contractor under this item, Contractor to quote accordingly. c.) Contractor works includes all work including tie in with exisitng facilities and with pipeline (Refer scope demarcation drawing)

PIPING WORKS THORAMUKH

Installation of above ground Carbon Steel Process Piping as per details given below:

Size - 6 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

Size - 4 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

Size - 2 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

Size - 4 Inch, Thk/Sch - STD, Material - ASTM A 333 GR.6, ASME B-36.10, BE, Seamless

Size - 2 Inch, Thk/Sch - XS, Material - ASTM A 333 GR.6, ASME B-36.10, BE, Seamless

Installation of Under ground Carbon Steel Process Piping as per details given below:

Size - 6 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

Size - 4 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

INSTALLATION OF VALVES / FLOW METER / SCRAPER RECIEVER

Receiving and taking over of all Owner supplied materials, equipment's from Owner's designated place(s) of issue, loading , unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials, equipment, consumables as defined in Contractor's scope of supply and its transportation to the work site(s);installation of valves, flow meters, strainers, equipment's including fixing of gaskets, bolts, studs, nuts wherever required, levelling, aligning, installation and assembly of accessories including accessories for actuators including making electrical connections for such actuators, if any, by bolting/ threading or welding of pipes at all elevations, testing, completing all works in all respects as per drawings, specification, other provisions of Contract and directions of the Engineer-in-Charge.

Installation of Scraper Launcher as per details given below

Barrel Size - 12 INCH, Neck Size - 6 INCH, Rating - 300

Installation of above ground Flanged Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -4" Inch, Rating - 300#

Size -2" Inch, Rating - 300#

Size -4" Inch, Rating - 150#

Installation of above ground Butt Welded Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -6" Inch, Rating - 300#

Size -4" Inch, Rating - 300#

Installation of above ground Butt Welded/Flanged Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -2" Inch, Rating - 300#

Installation of above ground Flanged Electrical Hydraulic Operated Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -6" Inch, Rating - 300#

Installation of above ground Butt Welded Motor Operated Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -6 Inch, Rating - 300#

Installation of above ground Butt Welded Insulating Joint as per details given below:

Size -6 Inch, Rating - 300#

RADIOGRAPHY:

Performance of radiographic inspection of piping of all types, sizes, thickness including providing or hiring of all necessary equipment, supply of all consumables including radiographic films and whatever else even though not expressly mentioned but required to perform the work as per specification and instructions of Engineer-in-Charge. Contractor to submit DPR, Inspection Report along with Radiography Report to Engineer-in-Charge. Note : a) All NDT including Radiography, MPT, LPT for below 2" are covered under this SOR item. No separate payment shall be made. Radiography of piping joints as per details given below:

Size - 6 Inch

Size - 4 Inch

Size - 2 Inch

PIPE SUPPORTS

Supply, fabrication and erection of pipe/ equipment supports (for all sizes/ thickness) including shoes, pipes etc. as required, cradles, turn buckles, T-posts for all types of guides, anchors, special supports for cold/hot insulated pipes etc. if applicable, all necessary equipment, consumables, labour etc. for completing all works including supply of bolts, nuts, washers, U-clamps, wooden blocks etc. as required for supporting, supply and application of paints and primers suitable for normal corrosive painting environment as defined in contract document and as per standard specification for painting specification no. VPC-SS-PI-0008, Drawings, Specification, Standards, other provisions of Contract and instruction of Engineer-in-Charge.

MS Structural Steel

PAINTING

Supply of paints, solvents and primers, preparation of surfaces and application of primer and finish paints suitable for normal/highly corrosive painting environment as defined in contract document and on pipes as per standard specification for painting specification no. VPC-SS-PI-0008, identification, lettering/ numbering, colour coding etc. as specified including rub down and touch up of shop primer or scrapping of shop primer wherever required and providing of scaffolding for all heights, labour, materials, tools and tackles, consumables, supervision etc. to complete the work in all respect as per Specification, Drawings, Standards and instruction of Engineer-in-Charge. Note : a) All painting work for sizes below 2" are covered under this SOR item. No separate payment shall be made. b) Painting shall be suitable for normal corrosive enviroment as per specification VPC-SS-PI-0008

Painting of all above ground piping including all fittings, valves, flanges etc. and including colour bands

Size - 6 Inch

Size - 4 Inch

Size - 2 Inch

COATING OF UNDER GROUND PIPING

Coating of Under ground Carbon Steel Process Piping with Solid Epoxy 1000 microns /Powercrete R95

Size - 6 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

Size - 4 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER) (FOR TERMINAL PIPING)

LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER): All works for leak/burst (occurring during hydrostatic testing) including necessary repair/replacement of defective pipe length, including cutting and removing out defective pipes, welding, NDT of welds, repair and re-testing of defective welds, painting of welded joints, clean-up, re hydro testing of the pipe segment including providing all necessary equipments, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, specifications enclosed with the Contract and directions of Engineer-in-Charge. Note : This rate shall be applicable for manufacturing defects in Company supplied materials only.

SUPPLY OF FLAME ARRESTOR & RAIN HOOD WITH BIRD SCREENN

Supply and Installation of Flame Arrestor Rain Hood with Bird Screen including all necessary fabrication works, including providing all necessary equipment, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, specifications enclosed with the Contract and directions of Engineer-in-Charge.

4" Flame Arrestor & Rain Hood with Bird Screen

2" Flame Arrestor & Rain Hood with Bird Screen

SUPPLY OF NITROGEN

Supply of Nitrogen for purging during hook of piping with existing piping & commisioning

INSTALLATION OF MECHANICAL EQUIPMENTS

Supply And installation of Fire Extinguisher

10 Kg DCP extinguisher. (Scrapper Barrel area)

75 Kg DCP bsaed fire extinguisher

2 Kg CO2 fire extinguisher

PIPING WORKS HALMIRAMUKH

Installation of above ground Carbon Steel Process Piping as per details given below:

Size - 6 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

Size - 4 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

Size - 2 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

Size - 4 Inch, Thk/Sch - STD, Material - ASTM A 333 GR.6, ASME B-36.10, BE, Seamless

Size - 2 Inch, Thk/Sch - XS, Material - ASTM A 333 GR.6, ASME B-36.10, BE, Seamless

Installation of Under ground Carbon Steel Process Piping as per details given below:

Size - 6 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

Size - 4 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

INSTALLATION OF VALVES / FLOW METER / SCRAPER RECIEVER

Receiving and taking over of all Owner supplied materials, equipment's from Owner's designated place(s) of issue, loading , unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials, equipment, consumables as defined in Contractor's scope of supply and its transportation to the work site(s);installation of valves, flow meters, strainers, equipment's including fixing of gaskets, bolts, studs, nuts wherever required, levelling, aligning, installation and assembly of accessories including accessories for actuators including making electrical connections for such actuators, if any, by bolting/ threading or welding of pipes at all elevations, testing, completing all works in all respects as per drawings, specification, other provisions of Contract and directions of the Engineer-in-Charge.

Installation of Scraper Reciever as per details given below

Barrel Size - 12 INCH, Neck Size - 6 INCH, Rating - 300

Installation of above ground Flanged Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -4" Inch, Rating - 300#

Size -2" Inch, Rating - 300#

Size -4" Inch, Rating - 150#

Installation of above ground Butt Welded Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -6" Inch, Rating - 300#

Size -4" Inch, Rating - 300#

Installation of above ground Flanged Electrical Hydraulic Operated Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -6" Inch, Rating - 300#

Installation of above ground Butt Welded Motor Operated Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -6 Inch, Rating - 300#

Installation of above ground Butt Welded Insulating Joint as per details given below:

Size -6 Inch, Rating - 300#

RADIOGRAPHY:

Performance of radiographic inspection of piping of all types, sizes, thickness including providing or hiring of all necessary equipment, supply of all consumables including radiographic films and whatever else even though not expressly mentioned but required to perform the work as per specification and instructions of Engineer-in-Charge. Contractor to submit DPR, Inspection Report along with Radiography Report to Engineer-in-Charge. Note : a) All NDT including Radiography, MPT, LPT for below 2" are covered under this SOR item. No separate payment shall be made. Radiography of piping joints as per details given below:

Size - 6 Inch

Size - 4 Inch

Size - 2 Inch

PIPE SUPPORTS

Supply, fabrication and erection of pipe/ equipment supports (for all sizes/ thickness) including shoes, pipes etc. as required, cradles, turn buckles, T-posts for all types of guides, anchors, special supports for cold/hot insulated pipes etc. if applicable, all necessary equipment, consumables, labour etc. for completing all works including supply of bolts, nuts, washers, U-clamps, wooden blocks etc. as required for supporting, supply and application of paints and primers suitable for normal corrosive painting environment as defined in contract document and as per standard specification for painting specification no. VPC-SS-PI-0008, Drawings, Specification, Standards, other provisions of Contract and instruction of Engineer-in-Charge.

MS Structural Steel

PAINTING

Supply of paints, solvents and primers, preparation of surfaces and application of primer and finish paints suitable for normal/highly corrosive painting environment as defined in contract document and on pipes as per standard specification for painting specification no. VPC-SS-PI-0008, identification, lettering/ numbering, colour coding etc. as specified including rub down and touch up of shop primer or scrapping of shop primer wherever required and providing of scaffolding for all heights, labour, materials, tools and tackles, consumables, supervision etc. to complete the work in all respect as per Specification, Drawings, Standards and instruction of Engineer-in-Charge. Note : a) All painting work for sizes below 2" are covered under this SOR item. No separate payment shall be made. b) Painting shall be suitable for normal corrosive enviroment as per specification VPC-SS-PI-0008

Painting of all above ground piping including all fittings, valves, flanges etc. and including colour bands

Size - 6 Inch

Size - 4 Inch

Size - 2 Inch

COATING OF UNDER GROUND PIPING

Coating of Under ground Carbon Steel Process Piping with Solid Epoxy 1000 microns /Powercrete R95

Size - 6 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

Size - 4 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER) (FOR TERMINAL PIPING)

LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER): All works for leak/burst (occurring during hydrostatic testing) including necessary repair/replacement of defective pipe length, including cutting and removing out defective pipes, welding, NDT of welds, repair and re-testing of defective welds, painting of welded joints, clean-up, re hydro testing of the pipe segment including providing all necessary equipments, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, specifications enclosed with the Contract and directions of Engineer-in-Charge. Note : This rate shall be applicable for manufacturing defects in Company supplied materials only.

SUPPLY OF FLAME ARRESTOR & RAIN HOOD WITH BIRD SCREENN

Supply and Installation of Flame Arrestor Rain Hood with Bird Screen including all necessary fabrication works, including providing all necessary equipment, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, specifications enclosed with the Contract and directions of Engineer-in-Charge.

4" Flame Arrestor & Rain Hood with Bird Screen

2" Flame Arrestor & Rain Hood with Bird Screen

SUPPLY OF NITROGEN

Supply of Nitrogen for purging during hook of piping with existing piping & commisioning

INSTALLATION OF MECHANICAL EQUIPMENTS

Supply And installation of Fire Extinguisher

10 Kg DCP extinguisher. (Scrapper Barrel area)

75 Kg DCP bsaed fire extinguisher

2 Kg CO2 fire extinguisher

PIPING WORKS NUMALIGARH

Installation of above ground Carbon Steel Process Piping as per details given below:

Size - 8 Inch, Thk/Sch - 6.4, Material - API 5L GR.X 52/60 PSL 2, (CHARPY), API 5L, BE, Seamless

Size - 4 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (CHARPY), ASME B-36.10, BE, Seamless

Size - 2 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (CHARPY), ASME B-36.10, BE, Seamless

Size - 4 Inch, Thk/Sch - STD, Material - ASTM A 333 GR.6, ASME B-36.10, BE, Seamless

Size - 2 Inch, Thk/Sch - XS, Material - ASTM A 333 GR.6, ASME B-36.10, BE, Seamless

Installation of Under ground Carbon Steel Process Piping as per details given below:

Size - 8 Inch, Thk/Sch - 6.4, Material - API 5L GR.X 52/60 PSL 2, (CHARPY), API 5L, BE, Seamless

Size - 4 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (CHARPY), ASME B-36.10, BE, Seamless

INSTALLATION OF VALVES / FLOW METER / SCRAPER RECIEVER

Receiving and taking over of all Owner supplied materials, equipment's from Owner's designated place(s) of issue, loading , unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials, equipment, consumables as defined in Contractor's scope of supply and its transportation to the work site(s);installation of valves, flow meters, strainers, equipment's including fixing of gaskets, bolts, studs, nuts wherever required, levelling, aligning, installation and assembly of accessories including accessories for actuators including making electrical connections for such actuators, if any, by bolting/ threading or welding of pipes at all elevations, testing, completing all works in all respects as per drawings, specification, other provisions of Contract and directions of the Engineer-in-Charge.

Installation of Scraper Reciever as per details given below

Barrel Size - 14 INCH, Neck Size - 8 INCH, Rating - 300

Installation of above ground Flanged Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -4" Inch, Rating - 300#

Size -2" Inch, Rating - 300#

Size -4" Inch, Rating - 150#

Installation of above ground Butt Welded Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -8" Inch, Rating - 300#

Size -4" Inch, Rating - 300#

Installation of above ground Flanged Electrical Hydraulic Operated Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -8" Inch, Rating - 300#

Installation of above ground Butt Welded Motor Operated Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -8" Inch, Rating - 300#

Installation of above ground Butt Welded Insulating Joint as per details given below:

Size -8" Inch, Rating - 300#

RADIOGRAPHY:

Performance of radiographic inspection of piping of all types, sizes, thickness including providing or hiring of all necessary equipment, supply of all consumables including radiographic films and whatever else even though not expressly mentioned but required to perform the work as per specification and instructions of Engineer-in-Charge. Contractor to submit DPR, Inspection Report along with Radiography Report to Engineer-in-Charge. Note : a) All NDT including Radiography, MPT, LPT for below 2" are covered under this SOR item. No separate payment shall be made. Radiography of piping joints as per details given below:

Size - 8 Inch

Size - 4 Inch

Size - 2 Inch

PIPE SUPPORTS

Supply, fabrication and erection of pipe/ equipment supports (for all sizes/ thickness) including shoes, pipes etc. as required, cradles, turn buckles, T-posts for all types of guides, anchors, special supports for cold/hot insulated pipes etc. if applicable, all necessary equipment, consumables, labour etc. for completing all works including supply of bolts, nuts, washers, U-clamps, wooden blocks etc. as required for supporting, supply and application of paints and primers suitable for normal corrosive painting environment as defined in contract document and as per standard specification for painting specification no. VPC-SS-PI-0008, Drawings, Specification, Standards, other provisions of Contract and instruction of Engineer-in-Charge.

MS Structural Steel

PAINTING

Supply of paints, solvents and primers, preparation of surfaces and application of primer and finish paints suitable for normal/highly corrosive painting environment as defined in contract document and on pipes as per standard specification for painting specification no. VPC-SS-PI-0008, identification, lettering/ numbering, colour coding etc. as specified including rub down and touch up of shop primer or scrapping of shop primer wherever required and providing of scaffolding for all heights, labour, materials, tools and tackles, consumables, supervision etc. to complete the work in all respect as per Specification, Drawings, Standards and instruction of Engineer-in-Charge. Note : a) All painting work for sizes below 2" are covered under this SOR item. No separate payment shall be made. b) Painting shall be suitable for normal corrosive enviroment as per specification VPC-SS-PI-0008

Painting of all above ground piping including all fittings, valves, flanges etc. and including colour bands

Size - 8 Inch

Size - 4 Inch

Size - 2 Inch

COATING OF UNDER GROUND PIPING

Coating of Under ground Carbon Steel Process Piping with Solid Epoxy 1000 microns /Powercrete R95

Size - 8 Inch, Thk/Sch - 6.4, Material - API 5L GR.X 52/60 PSL 2, (CHARPY), API 5L, BE, Seamless

Size - 4 Inch, Thk/Sch - XS, Material - ASTM A 106 GR.B (CHARPY), ASME B-36.10, BE, Seamless

LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER) (FOR TERMINAL PIPING)

LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER): All works for leak/burst (occurring during hydrostatic testing) including necessary repair/replacement of defective pipe length, including cutting and removing out defective pipes, welding, NDT of welds, repair and re-testing of defective welds, painting of welded joints, clean-up, re hydro testing of the pipe segment including providing all necessary equipments, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, specifications enclosed with the Contract and directions of Engineer-in-Charge. Note : This rate shall be applicable for manufacturing defects in Company supplied materials only.

SUPPLY OF FLAME ARRESTOR & RAIN HOOD WITH BIRD SCREENN

Supply and Installation of Flame Arrestor Rain Hood with Bird Screen including all necessary fabrication works, including providing all necessary equipment, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, specifications enclosed with the Contract and directions of Engineer-in-Charge.

4" Rain Cap with Flapper

2" Rain Cap with Flapper

SUPPLY OF NITROGEN

Supply of Nitrogen for purging during hook of piping with existing piping & commisioning

INSTALLATION OF MECHANICAL EQUIPMENTS

Supply And installation of Fire Extinguisher

10 Kg DCP extinguisher. (Scrapper Barrel area)

75 Kg DCP bsaed fire extinguisher

2 Kg CO2 fire extinguisher

PIPING WORKS DULIAJAN TAP OFF

Installation of above ground Carbon Steel Process Piping as per details given below:

Size - 12 Inch, Thk/Sch - STD, Material - ASTM A 106 GR.B (Charpy), ASME B-36.10, BE, Seamless

INSTALLATION OF VALVES / FLOW METER / SCRAPER RECIEVER

Receiving and taking over of all Owner supplied materials, equipment's from Owner's designated place(s) of issue, loading , unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials, equipment, consumables as defined in Contractor's scope of supply and its transportation to the work site(s);installation of valves, flow meters, strainers, equipment's including fixing of gaskets, bolts, studs, nuts wherever required, levelling, aligning, installation and assembly of accessories including accessories for actuators including making electrical connections for such actuators, if any, by bolting/ threading or welding of pipes at all elevations, testing, completing all works in all respects as per drawings, specification, other provisions of Contract and directions of the Engineer-in-Charge.

Installation of above ground Flanged Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -12" Inch, Rating - 300#

Installation of above ground Butt Welded Valves (Ball / Plug / Check / Gate / Globe) as per details given below:

Size -12" Inch, Rating - 300#

Installation of above ground Butt Welded Insulating Joint as per details given below:

Size -8" Inch, Rating - 300#

RADIOGRAPHY:

Performance of radiographic inspection of piping of all types, sizes, thickness including providing or hiring of all necessary equipment, supply of all consumables including radiographic films and whatever else even though not expressly mentioned but required to perform the work as per specification and instructions of Engineer-in-Charge. Contractor to submit DPR, Inspection Report along with Radiography Report to Engineer-in-Charge. Note : a) All NDT including Radiography, MPT, LPT for below 2" are covered under this SOR item. No separate payment shall be made. Radiography of piping joints as per details given below:

Size - 12 Inch

PIPE SUPPORTS

Supply, fabrication and erection of pipe/ equipment supports (for all sizes/ thickness) including shoes, pipes etc. as required, cradles, turn buckles, T-posts for all types of guides, anchors, special supports for cold/hot insulated pipes etc. if applicable, all necessary equipment, consumables, labour etc. for completing all works including supply of bolts, nuts, washers, U-clamps, wooden blocks etc. as required for supporting, supply and application of paints and primers suitable for normal corrosive painting environment as defined in contract document and as per standard specification for painting specification no. VPC-SS-PI-0008, Drawings, Specification, Standards, other provisions of Contract and instruction of Engineer-in-Charge.

MS Structural Steel

PAINTING

Supply of paints, solvents and primers, preparation of surfaces and application of primer and finish paints suitable for normal/highly corrosive painting environment as defined in contract document and on pipes as per standard specification for painting specification no. VPC-SS-PI-0008, identification, lettering/ numbering, colour coding etc. as specified including rub down and touch up of shop primer or scrapping of shop primer wherever required and providing of scaffolding for all heights, labour, materials, tools and tackles, consumables, supervision etc. to complete the work in all respect as per Specification, Drawings, Standards and instruction of Engineer-in-Charge. Note : a) All painting work for sizes below 2" are covered under this SOR item. No separate payment shall be made. b) Painting shall be suitable for normal corrosive enviroment as per specification VPC-SS-PI-0008

Size - 12 Inch

LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER) (FOR TERMINAL PIPING)

LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER): All works for leak/burst (occurring during hydrostatic testing) including necessary repair/replacement of defective pipe length, including cutting and removing out defective pipes, welding, NDT of welds, repair and re-testing of defective welds, painting of welded joints, clean-up, re hydro testing of the pipe segment including providing all necessary equipments, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, specifications enclosed with the Contract and directions of Engineer-in-Charge. Note : This rate shall be applicable for manufacturing defects in Company supplied materials only.

SUPPLY OF NITROGEN

Supply of Nitrogen for purging during hook of piping with existing piping & commisioning

INSTALLATION OF MECHANICAL EQUIPMENTS AT GOLAGHAT TERMINAL

Supply, installation and commissioning of Clean agent system for control building , considering high risk zone (size- 5 x 6 x 4)

CIVIL WORKS

CIVIL WORKS THORAMUKH

FENCING & GATE

Supplying, fixing and tensioning in position 2.5mm(12gauge), 2 ply, 4 points, GI Barbed wire designation A-1 conforming to IS:278 in horizontal rows and cross diagonals for compound wall "Y" shaped overhang etc. with necessary GI staples, clips and pins, GI straining bolts and binding wire with all labour and materials etc. complete as per drawings, specifications and directions of Engineer-in-Charge.(The barbed wire shall be measured in linear length of the barbed wire actually fixed).

SUPPLY & FIXING : CONCENTINA COIL Supplying and laying concertina coil of 750 mm diameter over boundary wall as per specifications.

Supplying, fabricating and fixing in position structural steel line posts, straining posts, struts for 'Y' shaped overhang etc. conforming to IS:2062 over brick/stone Masonry/ RCC compound walls/ columns, cutting to required size as per drawings and specifications, welding where necessary, embedding in position, holding to correct level and line, any auxiliary structure for dummy supports, drilling holes and painting as per painting specification attached with tender, cutting brick/rubble/concrete surfaces if necessary, grouting with M20 grade concrete including cost of grout with all labour and material etc. complete as per drawings, specifications and directions of Engineer-in- Charge.

Providing and fixing in position Steel Entrance Gates consisting of MC- 75 framework for shutters, 20mm square M.S. vertical bars welded to the framework @100mm c/c, 2mm thick M.S. sheet boxing, locking arrangement, 25mm thick, 75mm dia M.S. wheel with ball bearing including fixing the gate to RCC/ masonry by M.S. hinge arrangement (75mm x 75mm x 6mm M.S. angles, bolt, washers) and M.S. hold fast grouted with M-15 grade concrete, providing and fixing M.S. pivot, 50mm x 50mm x 6mm M.S. Tee bent to shape and embedded in road surface for gate opening track, gate stopper, painting the gate with approved shade and quality synthetic enamel paint (two coats) and a coat of approved quality primer, ensuring smooth operation of the gate etc. all complete as per attached standard drawing.

EARTHWORK IN SITE GRADING

Earthwork in excavation and filling in all types of soil except soft rock and hard rock for general site grading for all heights and depths including clearing and stripping etc. in excavation areas, removing shrubs, grass, bushes, vegetable growth and other objectionable materials, trees upto and inclusive of a girth of 30 cms. (girth measured at a height of one metre above ground level) including uprooting of roots, etc., dewatering, if necessary, sorting out the excavated soil into serviceable and unserviceable materials in excavation areas and including filling in filling areas with serviceable material for general site grading and roads for all heights and depths to proper levels, slopes, grades and camber including clearing and stripping in filling areas as per specifications, consolidating exposed natural soil to 90% of max. laboratory dry density as per IS:2720 Part-VII, cutting of trees of girth upto and inclusive of 30 cms, removal of vegetation, breaking clods, spreading in layers not exceeding 30 cms loose thickness, watering, ramming and compacting with power road rollers to give at least 90% of max. laboratory dry density, dressing, leveling, testing, etc. and disposal of unserviceable materials/surplus earth if any, as directed by Engineer-in-Charge including stacking and/or dumping and dressing the same in demarcated areas etc. complete as per specifications, drawings and directions of Engineer-in-Charge. (The leads for the above mentioned operations shall be within the boundary limit of the plant and measurement shall be taken in the cutting area only).

SAND FILLING

Supplying and filling approved SAND of specified quality under floors, in foundations, plinths, tank foundations etc. for all depths and heights including cost of sand,royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers of loose thickness not exceeding 150 mm,watering,ramming,compacting with mechanical compactors and/or other equipment to the specified levels to achive 85% relative density as per IS:2720 Part XIV,including preparation of subgrade to the required slope,providing testing apparatus and testing the degree of consolidation all complete as per drawings, specifications and direction of Engineer-in-charge.The rates shall be inclusive of the cost of all labour,material,equipments etc. all complete .

RCC HUME PIPE CULVERT

Providing, laying, jointing and testing RCC hume pipes of 500mm dia. and np3 class for culverts, road crossing, incl. excavation in all strata up to an average depth of 1 m cutting, collars jointing in 1:2 cement mortar etc. complete as per specifications and as directed by the engineer-in charge.

DEMOLITION OF R.C.C./BRICKS/STONE MASONRY.

Site clearance by demolition of R.C.C./Brickwork/Stone Masonry/Stone Soling, Flexible pavements etc. along with removing the debris and disposal of unserviceable material to any lead and staking of serviceable materials, handing over serviceable material to concerned department if required as per technical specifications and direction of Engineer-in-charge. Note: 1. Rate includes cost of all labour, tools, tackles, hire charges, royalties, levies, leads, loading/unloading, transportation, water, electric power, illumination etc. complete in all respects as per scope of work, detailed construction drawings, technical specifications and direction of Engineer-in-charge. 2. Demolition of RCC/PCC/Brick Masonry/Road will be paid in NET CUM as demolished.

ERC/IRC

Construction of ERC/IRC as per Std. including supplying and laying in position PVC pipes conforming to IS:4985 Class-I for electrical and instrumentation Road Crossings as per standard drawing and its addendum, including cutting the pipes if necessary, lowering, laying in position to proper levels, etc. embedded in M-20 grade concrete, providing proper jointing as per code requirements or manufacturer's recommendations, etc. including earth work in excavation in all types of soil except soft and hard rock, backfilling and making good the surface, including cutting of new/ existing roads and making good the same including supply of any road material if required, (Back filling with road material shall be done in 150 mm thick layers well watered and compacted), including supplying and providing in the encasement concrete, cable crossing indicator made out of 4 mm thick MS circular plate of dia. 150mm welded to 16 mm dia. MS rod of approximately 1.0 m length and painting and lettering with 2 coats of approved enamel paint of approved colour over a coat of red oxide primer etc., supply and fixing of reinforcement as per drawing, including disposal of surplus earth anywhere within plant bounDSRy limit etc. all complete as per drawings, specifications and instructions of Engineer-in-Charge.

EARTH WORK IN FOUNDATION

Earth work in Excavation below ground level for all kinds of works in ALL TYPES OF SOIL as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete.

For depth beyond 1.5m and upto & inclusive of 3.0m.

EARTHWORK IN FILLING by excavating the earth from BORROW AREAS arranged by CONTRACTOR for all leads, transporting the earth from borrow area including cleaning & stripping the earth at borrow areas, breaking clods, loading, unloading and laying at all depths and heights in layers of thickness not exceeding 15 cms., watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% of the maximum laboratory dry density, dressing, trimming, levelling the top surface etc. in foundations, plinths, trenches etc. all complete.

Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial lead of 100M including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids) i) Upto 1.0Km.

PLAIN & REINFORCED CEMENT CONCRETE:

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:4:8 by volume (1 Cement: 4 Coarse Sand: 8 Crushed Stone Aggregates/Gravels with 40mm and down size graded crushed stone aggaregates.

Concrete of nominal mix of 1:5:10 by volume (1 Cement :5 Coarse Sand : 10 Crushed Stone Aggaregates/Gravels).

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete grade M20 with 20mm and down size graded crushed stone aggaregates/Gravels. .

Providing and laying REINFORCED CEMENT CONCRETE OF M-25 GRADE with 20mm and down size graded crushed stone aggregates/gravel in SUB-STRUCTURE of all types e.g. foundations, footings, raft, beams, slabs, pile caps, retaining walls, jambs, counterforts, buttresses, trenches, manholes,pipe encasement, catchpits, drains, RCC pits, equipment/machine foundations, pedestals, pipe sleepers, columns, plinth beams, suspended floors, beams, staircases, landings, steps, brackets etc. (including single pour concreting upto 250m3), including cost of admixtures if used,providing pockets, openings, recesses, chamfering etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. all complete (excluding the Cost of Reinforcement and Shuttering) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed.

Providing and laying REINFORCED CEMENT CONCRETE OF M-25 GRADE with 20mm and down size graded crushed stone aggregates/gravel in SUPER STRUCTURE in suspended floors, slabs, beams, columns, walls including counterforts, staircases, landings, steps, facias, fins, mouldings, gutters, shelves, windowsills, canopies, lintels, girders, ducts, brackets, chajjas with drip moulds, pedestals, posts, struts, equipment/machine foundations, ramps etc. (including single pour concreting upto 250m3) including cost of admixtures if used providing pockets, openings, recesses, chamfering wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. all complete (excluding the Cost of Reinforcement and Shuttering) for all heights above plinth level in any shape, position, thickness etc. all complete as specified, shown and directed.

CONCRETE PAVEMENTS

Providing and laying Reinforced cement concrete in M-25 grade with 20mm and down size graded crushed stone aggregates in flooring, pavements etc. including leaving pockets, if necessary, making recess/drains, laying in alternate panels, etc. for all depths including shuttering, tamping, curing, etc. as specified in any shape, thickness, position and finishing the top surface smooth etc. all complete as per drawings, specifications and directions of Engineer-in-Charge (excluding cost of providing and fixing reinforcement & joint sealing).

PAVER BLOCK FLOORING

Supplying and placing in position as per approved pattern of Cement Concrete Inter locking paver block 80 mm thick of approved shape, rough finish, M-40 strength of approved brand laid over the sand bed of minimum 100 mm thick. The CC interlocking blocks to be of uniform Grey colour or as approved by EIC complete in all respects , as per technical specifications and directions of the Engineer-in-charge Note :- 1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such paver blocks, sand, earth work in excavation in cutting earth in all conditions, shuttering with all bye works and sundry works. 2. To be read with in conjunction with Particular Job Specification 3. Supply of all materials and providing labour, tools and tackles are in contractor’s scope

CENTERING & SHUTTERING Providing and fixing CENTERING AND SHUTTERING in foundations, footings, raft beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, equipment/machine foundations, pedestals, abutments, pipe sleepers, columns, plinth beams, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/bunkers/silos/ shafts/ hoppers/liquid storage structures etc. including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed.

i) For all depths below, upto & inclusive of plinth

ii) For all heights above plinth level.

REINFORCEMENT

Supplying and placing in position HIGH STRENGTH DEFORMED STEEL BARS REINFORCEMENT (conforming to IS:1786, Grade Fe 415), for R.C.C. work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with contractor's own 16 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete as directed.

STRUCTURAL STEEL WORKS

Supplying, transporting, storing, fabricating in position and testing/examining bolted and/or welded STRUCTURAL STEEL WORKS at all levels and locations including all builtup sections/compound sections made out of rolled sections and/or plates/bent plates in trusses, purlins, wind ties, wind girders, columns, portals, racks, frameworks, crane gantries, surge girders, bracings, floor beams, lifting beams, monorails, platforms, staircases (excluding chequered plates and gratings), ladders, stoppers, brackets, side runners, sagrods, supports for equipment and technological accesories and process piping, hand railings, posts, conveyor galleries, trestles, towers, masts, junction houses etc., cutting to required size, straightening/bending if required, edge preparation, cleaning, preheating, bolting/welding of joints, (including sealing the joints of box sections with continuous welding), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified, including preparation and submission of detailed fabrication drawings and applying primer after fabrication as per specification (for normal corrosive environment), etc. all complete

Supplying and applying FINISH PAINT of approved quality and shade including a coat of primer as per Specification/BIS Codes over one coat of shop primer already applied including storage, surface preparation, degreasing, cleaning, drying, touching up of shop primer coat, providing temporary staging, scaffolding, testing etc., for steel structures at all levels and locations, all complete as specified.

MISCELLANEOUS STEEL WORKS

Supplying, fabricating and erecting in position at all levels and locations bolted, screwed and/or welded M.S. CHEQUERED PLATES of any thickness in walkways, platforms, stairtreads, any other place as directed etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing, welding, preparation and submission of fabrication drawings and preparing the surfaces for painting and applying shop primer as per Specification after fabrication etc. all complete as specified and directed.

Supplying, transporting, storing, fabricating and fixing in position M.S. METAL INSERT (with lugs) of any shape made out of flats, plates, rolled sections, pipes etc. providing necessary templates, staging, cutting, straightening, if required, bolting, welding as required and embedding in position on both Plain and Reinforced Cement concrete members inclusive of adjusting shuttering & reinforcement/any other fixture, welding where necessary, tying and holding to correct level, line and position, any auxilliary dummy structures to support the heavy inserts, painting exposed surfaces with a coat of Red Oxide Zinc Chromate Primer etc. all complete for all depths and heights as specified and directed.

Supplying, fabricating and erecting in position at all levels and locations bolted, clamped and/or welded GRATING (fabricated as per standards) made out of M.S. flats/M.S. flats with M.S. rounds in walkways, platforms, stair treads etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fabricating clamps, fixing, welding, preparation and submission of fabrication drawings and preparing the surfaces for painting, surface cleaning, wire brushing, removal of mill scale, dust, rust, oil or grease and applying one shop coat of Red Oxide Zinc Chromate Primer after fabrication etc. all complete as specified and directed.

Supplying, fabricating, fixing and keeping in position at all levels and locations THREADED ANCHOR BOLTS of all diameters and nomenclature including nuts, washers, anchor plates, pipe sleeves etc. in foundations, columns, pedestals, slabs, beams, walls etc. or any other place as directed including handling & transporting, straightening if required, turning from relevant size M.S. rounds to required diameter, threading, welding, providing necessary templates and auxilliary dummy structures, if any, necessary tying and welding with reinforcement, adjustment of shuttering & reinforcement/any other fixture, greasing exposed metal surfaces, covering bolts and packing the sleeves with jute cloth etc. all complete as specified and directed.

Supplying, fabricating and fixing in position at all locations 500mm HIGH HAND RAILING (for stair cases) consisting of top rail & vertical posts (maximum spacing 1500mm c/c) with 32mm nominal diameter medium grade M.S. Tubes conforming to IS:1239 including straightening if required, cutting, bending, welding, painting with one shop coat of Red Oxide Zinc Chromate Primer, preparation and submission of fabrication drawings etc. all complete as specified, shown and directed

BRICK MASONRY

Providing and laying BRICK MASONRY WITH BRICKS OF CLASS 7.5 in cement mortar 1:4 (1 Cement : 4 Sand) in one or more brick thickness and in any shape (excluding circular/curved brick masonry) at all depths and height including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape & size, finishing the joints flush below ground level and raking out the joints above ground level, sealing the gap between masonry and soffit of beam/slab, embedding the fittings & fixtures, curing, etc. all complete as per specifications.

Providing and laying HALF BRICK MASONRY with bricks of CLASS 7.5 in cement mortar 1:4 (1 Cement : 4 Sand)in any shape, including the cost of materials, labour, scaffolding/staging, sampling and testing, soaking of bricks, cutting and laying of bricks, providing openings of any shape & size, raking out the joints, supplying and placing 2 Nos. 6mm dia. M.S. Bars at every fourth course, sealing the gap between masonry and soffit of beam/slab, embedding the fittings and fixtures, curing etc. all complete as per specification.

PLASTER

External Walls Ordinary plain cement plaster Average 18mm thick 1:4 (1 cement : 4 sand).

Internal Walls Ordinary plain cement plaster Average 12mm thick 1:4 (1 cement : 4 sand).

PAINTING OF WALLS

Painting of Internal walls:- Providing & applying 2 coats of waterproof decorative cement paint of approved make and approved shade, cleaning, including preparation of surfaces,base primer, curing etc. all complete

Painting of External walls:- Providing & applying 3 coats of waterproof decorative cement paint of approved make and approved shade, cleaning, including preparation of surfaces,base primer, curing etc. all complete

PORTA CABIN FOR GUARD ROOM

Supply & installation of porta cabin of size (2.0M X 2.0M X 3.35M) made up of approved quality steel sections/ frame work complete as per Specifications for Porta Cabins & drawing attached in bid document including associated civil foundation works.

CIVIL WORKS HALMIRAMUKH

FENCING & GATE

Supplying, fixing and tensioning in position 2.5mm(12gauge), 2 ply, 4 points, GI Barbed wire designation A-1 conforming to IS:278 in horizontal rows and cross diagonals for compound wall "Y" shaped overhang etc. with necessary GI staples, clips and pins, GI straining bolts and binding wire with all labour and materials etc. complete as per drawings, specifications and directions of Engineer-in-Charge.(The barbed wire shall be measured in linear length of the barbed wire actually fixed).

SUPPLY & FIXING : CONCENTINA COIL Supplying and laying concertina coil of 750 mm diameter over boundary wall as per specifications.

Supplying, fabricating and fixing in position structural steel line posts, straining posts, struts for 'Y' shaped overhang etc. conforming to IS:2062 over brick/stone Masonry/ RCC compound walls/ columns, cutting to required size as per drawings and specifications, welding where necessary, embedding in position, holding to correct level and line, any auxiliary structure for dummy supports, drilling holes and painting as per painting specification attached with tender, cutting brick/rubble/concrete surfaces if necessary, grouting with M20 grade concrete including cost of grout with all labour and material etc. complete as per drawings, specifications and directions of Engineer-in- Charge.

Providing and fixing in position Steel Entrance Gates consisting of MC- 75 framework for shutters, 20mm square M.S. vertical bars welded to the framework @100mm c/c, 2mm thick M.S. sheet boxing, locking arrangement, 25mm thick, 75mm dia M.S. wheel with ball bearing including fixing the gate to RCC/ masonry by M.S. hinge arrangement (75mm x 75mm x 6mm M.S. angles, bolt, washers) and M.S. hold fast grouted with M-15 grade concrete, providing and fixing M.S. pivot, 50mm x 50mm x 6mm M.S. Tee bent to shape and embedded in road surface for gate opening track, gate stopper, painting the gate with approved shade and quality synthetic enamel paint (two coats) and a coat of approved quality primer, ensuring smooth operation of the gate etc. all complete as per attached standard drawing.

EARTHWORK IN SITE GRADING

Earthwork in excavation and filling in all types of soil except soft rock and hard rock for general site grading for all heights and depths including clearing and stripping etc. in excavation areas, removing shrubs, grass, bushes, vegetable growth and other objectionable materials, trees upto and inclusive of a girth of 30 cms. (girth measured at a height of one metre above ground level) including uprooting of roots, etc., dewatering, if necessary, sorting out the excavated soil into serviceable and unserviceable materials in excavation areas and including filling in filling areas with serviceable material for general site grading and roads for all heights and depths to proper levels, slopes, grades and camber including clearing and stripping in filling areas as per specifications, consolidating exposed natural soil to 90% of max. laboratory dry density as per IS:2720 Part-VII, cutting of trees of girth upto and inclusive of 30 cms, removal of vegetation, breaking clods, spreading in layers not exceeding 30 cms loose thickness, watering, ramming and compacting with power road rollers to give at least 90% of max. laboratory dry density, dressing, leveling, testing, etc. and disposal of unserviceable materials/surplus earth if any, as directed by Engineer-in-Charge including stacking and/or dumping and dressing the same in demarcated areas etc. complete as per specifications, drawings and directions of Engineer-in-Charge. (The leads for the above mentioned operations shall be within the boundary limit of the plant and measurement shall be taken in the cutting area only).

SAND FILLING

Supplying and filling approved SAND of specified quality under floors, in foundations, plinths, tank foundations etc. for all depths and heights including cost of sand,royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers of loose thickness not exceeding 150 mm,watering,ramming,compacting with mechanical compactors and/or other equipment to the specified levels to achive 85% relative density as per IS:2720 Part XIV,including preparation of subgrade to the required slope,providing testing apparatus and testing the degree of consolidation all complete as per drawings, specifications and direction of Engineer-in-charge.The rates shall be inclusive of the cost of all labour,material,equipments etc. all complete .

RCC HUME PIPE CULVERT

Providing, laying, jointing and testing RCC hume pipes of 500mm dia. and np3 class for culverts, road crossing, incl. excavation in all strata up to an average depth of 1 m cutting, collars jointing in 1:2 cement mortar etc. complete as per specifications and as directed by the engineer-in charge.

DEMOLITION OF R.C.C./BRICKS/STONE MASONRY.

Site clearance by demolition of R.C.C./Brickwork/Stone Masonry/Stone Soling, Flexible pavements etc. along with removing the debris and disposal of unserviceable material to any lead and staking of serviceable materials, handing over serviceable material to concerned department if required as per technical specifications and direction of Engineer-in-charge. Note: 1. Rate includes cost of all labour, tools, tackles, hire charges, royalties, levies, leads, loading/unloading, transportation, water, electric power, illumination etc. complete in all respects as per scope of work, detailed construction drawings, technical specifications and direction of Engineer-in-charge. 2. Demolition of RCC/PCC/Brick Masonry/Road will be paid in NET CUM as demolished.

ERC/IRC

Construction of ERC/IRC as per Std. including supplying and laying in position PVC pipes conforming to IS:4985 Class-I for electrical and instrumentation Road Crossings as per standard drawing and its addendum, including cutting the pipes if necessary, lowering, laying in position to proper levels, etc. embedded in M-20 grade concrete, providing proper jointing as per code requirements or manufacturer's recommendations, etc. including earth work in excavation in all types of soil except soft and hard rock, backfilling and making good the surface, including cutting of new/ existing roads and making good the same including supply of any road material if required, (Back filling with road material shall be done in 150 mm thick layers well watered and compacted), including supplying and providing in the encasement concrete, cable crossing indicator made out of 4 mm thick MS circular plate of dia. 150mm welded to 16 mm dia. MS rod of approximately 1.0 m length and painting and lettering with 2 coats of approved enamel paint of approved colour over a coat of red oxide primer etc., supply and fixing of reinforcement as per drawing, including disposal of surplus earth anywhere within plant bounDSRy limit etc. all complete as per drawings, specifications and instructions of Engineer-in-Charge.

EARTH WORK IN FOUNDATION

Earth work in Excavation below ground level for all kinds of works in ALL TYPES OF SOIL as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete.

For depth beyond 1.5m and upto & inclusive of 3.0m.

EARTHWORK IN FILLING by excavating the earth from BORROW AREAS arranged by CONTRACTOR for all leads, transporting the earth from borrow area including cleaning & stripping the earth at borrow areas, breaking clods, loading, unloading and laying at all depths and heights in layers of thickness not exceeding 15 cms., watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% of the maximum laboratory dry density, dressing, trimming, levelling the top surface etc. in foundations, plinths, trenches etc. all complete.

Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial lead of 100M including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids) i) Upto 1.0Km.

PLAIN & REINFORCED CEMENT CONCRETE:

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:4:8 by volume (1 Cement: 4 Coarse Sand: 8 Crushed Stone Aggregates/Gravels with 40mm and down size graded crushed stone aggaregates.

Concrete of nominal mix of 1:5:10 by volume (1 Cement :5 Coarse Sand : 10 Crushed Stone Aggaregates/Gravels).

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete grade M20 with 20mm and down size graded crushed stone aggaregates/Gravels. .

Providing and laying REINFORCED CEMENT CONCRETE OF M-25 GRADE with 20mm and down size graded crushed stone aggregates/gravel in SUB-STRUCTURE of all types e.g. foundations, footings, raft, beams, slabs, pile caps, retaining walls, jambs, counterforts, buttresses, trenches, manholes,pipe encasement, catchpits, drains, RCC pits, equipment/machine foundations, pedestals, pipe sleepers, columns, plinth beams, suspended floors, beams, staircases, landings, steps, brackets etc. (including single pour concreting upto 250m3), including cost of admixtures if used,providing pockets, openings, recesses, chamfering etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. all complete (excluding the Cost of Reinforcement and Shuttering) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed.

Providing and laying REINFORCED CEMENT CONCRETE OF M-25 GRADE with 20mm and down size graded crushed stone aggregates/gravel in SUPER STRUCTURE in suspended floors, slabs, beams, columns, walls including counterforts, staircases, landings, steps, facias, fins, mouldings, gutters, shelves, windowsills, canopies, lintels, girders, ducts, brackets, chajjas with drip moulds, pedestals, posts, struts, equipment/machine foundations, ramps etc. (including single pour concreting upto 250m3) including cost of admixtures if used providing pockets, openings, recesses, chamfering wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. all complete (excluding the Cost of Reinforcement and Shuttering) for all heights above plinth level in any shape, position, thickness etc. all complete as specified, shown and directed.

CONCRETE PAVEMENTS

Providing and laying Reinforced cement concrete in M-25 grade with 20mm and down size graded crushed stone aggregates in flooring, pavements etc. including leaving pockets, if necessary, making recess/drains, laying in alternate panels, etc. for all depths including shuttering, tamping, curing, etc. as specified in any shape, thickness, position and finishing the top surface smooth etc. all complete as per drawings, specifications and directions of Engineer-in-Charge (excluding cost of providing and fixing reinforcement & joint sealing).

PAVER BLOCK FLOORING

Supplying and placing in position as per approved pattern of Cement Concrete Inter locking paver block 80 mm thick of approved shape, rough finish, M-40 strength of approved brand laid over the sand bed of minimum 100 mm thick. The CC interlocking blocks to be of uniform Grey colour or as approved by EIC complete in all respects , as per technical specifications and directions of the Engineer-in-charge Note :- 1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such paver blocks, sand, earth work in excavation in cutting earth in all conditions, shuttering with all bye works and sundry works. 2. To be read with in conjunction with Particular Job Specification 3. Supply of all materials and providing labour, tools and tackles are in contractor’s scope

CENTERING & SHUTTERING Providing and fixing CENTERING AND SHUTTERING in foundations, footings, raft beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, equipment/machine foundations, pedestals, abutments, pipe sleepers, columns, plinth beams, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/bunkers/silos/ shafts/ hoppers/liquid storage structures etc. including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed.

i) For all depths below, upto & inclusive of plinth

ii) For all heights above plinth level.

REINFORCEMENT

Supplying and placing in position HIGH STRENGTH DEFORMED STEEL BARS REINFORCEMENT (conforming to IS:1786, Grade Fe 415), for R.C.C. work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with contractor's own 16 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete as directed.

STRUCTURAL STEEL WORKS

Supplying, transporting, storing, fabricating in position and testing/examining bolted and/or welded STRUCTURAL STEEL WORKS at all levels and locations including all builtup sections/compound sections made out of rolled sections and/or plates/bent plates in trusses, purlins, wind ties, wind girders, columns, portals, racks, frameworks, crane gantries, surge girders, bracings, floor beams, lifting beams, monorails, platforms, staircases (excluding chequered plates and gratings), ladders, stoppers, brackets, side runners, sagrods, supports for equipment and technological accesories and process piping, hand railings, posts, conveyor galleries, trestles, towers, masts, junction houses etc., cutting to required size, straightening/bending if required, edge preparation, cleaning, preheating, bolting/welding of joints, (including sealing the joints of box sections with continuous welding), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified, including preparation and submission of detailed fabrication drawings and applying primer after fabrication as per specification (for normal corrosive environment), etc. all complete

Supplying and applying FINISH PAINT of approved quality and shade including a coat of primer as per Specification/BIS Codes over one coat of shop primer already applied including storage, surface preparation, degreasing, cleaning, drying, touching up of shop primer coat, providing temporary staging, scaffolding, testing etc., for steel structures at all levels and locations, all complete as specified.

MISCELLANEOUS STEEL WORKS

Supplying, fabricating and erecting in position at all levels and locations bolted, screwed and/or welded M.S. CHEQUERED PLATES of any thickness in walkways, platforms, stairtreads, any other place as directed etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing, welding, preparation and submission of fabrication drawings and preparing the surfaces for painting and applying shop primer as per Specification after fabrication etc. all complete as specified and directed.

Supplying, transporting, storing, fabricating and fixing in position M.S. METAL INSERT (with lugs) of any shape made out of flats, plates, rolled sections, pipes etc. providing necessary templates, staging, cutting, straightening, if required, bolting, welding as required and embedding in position on both Plain and Reinforced Cement concrete members inclusive of adjusting shuttering & reinforcement/any other fixture, welding where necessary, tying and holding to correct level, line and position, any auxilliary dummy structures to support the heavy inserts, painting exposed surfaces with a coat of Red Oxide Zinc Chromate Primer etc. all complete for all depths and heights as specified and directed.

Supplying, fabricating and erecting in position at all levels and locations bolted, clamped and/or welded GRATING (fabricated as per standards) made out of M.S. flats/M.S. flats with M.S. rounds in walkways, platforms, stair treads etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fabricating clamps, fixing, welding, preparation and submission of fabrication drawings and preparing the surfaces for painting, surface cleaning, wire brushing, removal of mill scale, dust, rust, oil or grease and applying one shop coat of Red Oxide Zinc Chromate Primer after fabrication etc. all complete as specified and directed.

Supplying, fabricating, fixing and keeping in position at all levels and locations THREADED ANCHOR BOLTS of all diameters and nomenclature including nuts, washers, anchor plates, pipe sleeves etc. in foundations, columns, pedestals, slabs, beams, walls etc. or any other place as directed including handling & transporting, straightening if required, turning from relevant size M.S. rounds to required diameter, threading, welding, providing necessary templates and auxilliary dummy structures, if any, necessary tying and welding with reinforcement, adjustment of shuttering & reinforcement/any other fixture, greasing exposed metal surfaces, covering bolts and packing the sleeves with jute cloth etc. all complete as specified and directed.

Supplying, fabricating and fixing in position at all locations 500mm HIGH HAND RAILING (for stair cases) consisting of top rail & vertical posts (maximum spacing 1500mm c/c) with 32mm nominal diameter medium grade M.S. Tubes conforming to IS:1239 including straightening if required, cutting, bending, welding, painting with one shop coat of Red Oxide Zinc Chromate Primer, preparation and submission of fabrication drawings etc. all complete as specified, shown and directed

BRICK MASONRY

Providing and laying BRICK MASONRY WITH BRICKS OF CLASS 7.5 in cement mortar 1:4 (1 Cement : 4 Sand) in one or more brick thickness and in any shape (excluding circular/curved brick masonry) at all depths and height including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape & size, finishing the joints flush below ground level and raking out the joints above ground level, sealing the gap between masonry and soffit of beam/slab, embedding the fittings & fixtures, curing, etc. all complete as per specifications.

Providing and laying HALF BRICK MASONRY with bricks of CLASS 7.5 in cement mortar 1:4 (1 Cement : 4 Sand)in any shape, including the cost of materials, labour, scaffolding/staging, sampling and testing, soaking of bricks, cutting and laying of bricks, providing openings of any shape & size, raking out the joints, supplying and placing 2 Nos. 6mm dia. M.S. Bars at every fourth course, sealing the gap between masonry and soffit of beam/slab, embedding the fittings and fixtures, curing etc. all complete as per specification.

PLASTER

External Walls Ordinary plain cement plaster Average 18mm thick 1:4 (1 cement : 4 sand).

Internal Walls Ordinary plain cement plaster Average 12mm thick 1:4 (1 cement : 4 sand).

PAINTING OF WALLS

Painting of Internal walls:- Providing & applying 2 coats of waterproof decorative cement paint of approved make and approved shade, cleaning, including preparation of surfaces,base primer, curing etc. all complete

Painting of External walls:- Providing & applying 3 coats of waterproof decorative cement paint of approved make and approved shade, cleaning, including preparation of surfaces,base primer, curing etc. all complete

PORTA CABIN FOR GUARD ROOM

Supply & installation of porta cabin of size (2.0M X 2.0M X 3.35M) made up of approved quality steel sections/ frame work complete as per Specifications for Porta Cabins & drawing attached in bid document including associated civil foundation works.

CIVIL WORKS NUMALIGARH

FENCING & GATE

Supplying, fixing and tensioning in position 2.5mm(12gauge), 2 ply, 4 points, GI Barbed wire designation A-1 conforming to IS:278 in horizontal rows and cross diagonals for compound wall "Y" shaped overhang etc. with necessary GI staples, clips and pins, GI straining bolts and binding wire with all labour and materials etc. complete as per drawings, specifications and directions of Engineer-in-Charge.(The barbed wire shall be measured in linear length of the barbed wire actually fixed).

SUPPLY & FIXING : CONCENTINA COIL Supplying and laying concertina coil of 750 mm diameter over boundary wall as per specifications.

Supplying, fabricating and fixing in position structural steel line posts, straining posts, struts for 'Y' shaped overhang etc. conforming to IS:2062 over brick/stone Masonry/ RCC compound walls/ columns, cutting to required size as per drawings and specifications, welding where necessary, embedding in position, holding to correct level and line, any auxiliary structure for dummy supports, drilling holes and painting as per painting specification attached with tender, cutting brick/rubble/concrete surfaces if necessary, grouting with M20 grade concrete including cost of grout with all labour and material etc. complete as per drawings, specifications and directions of Engineer-in- Charge.

Providing and fixing in position Steel Entrance Gates consisting of MC- 75 framework for shutters, 20mm square M.S. vertical bars welded to the framework @100mm c/c, 2mm thick M.S. sheet boxing, locking arrangement, 25mm thick, 75mm dia M.S. wheel with ball bearing including fixing the gate to RCC/ masonry by M.S. hinge arrangement (75mm x 75mm x 6mm M.S. angles, bolt, washers) and M.S. hold fast grouted with M-15 grade concrete, providing and fixing M.S. pivot, 50mm x 50mm x 6mm M.S. Tee bent to shape and embedded in road surface for gate opening track, gate stopper, painting the gate with approved shade and quality synthetic enamel paint (two coats) and a coat of approved quality primer, ensuring smooth operation of the gate etc. all complete as per attached standard drawing.

EARTHWORK IN SITE GRADING

Earthwork in excavation and filling in all types of soil except soft rock and hard rock for general site grading for all heights and depths including clearing and stripping etc. in excavation areas, removing shrubs, grass, bushes, vegetable growth and other objectionable materials, trees upto and inclusive of a girth of 30 cms. (girth measured at a height of one metre above ground level) including uprooting of roots, etc., dewatering, if necessary, sorting out the excavated soil into serviceable and unserviceable materials in excavation areas and including filling in filling areas with serviceable material for general site grading and roads for all heights and depths to proper levels, slopes, grades and camber including clearing and stripping in filling areas as per specifications, consolidating exposed natural soil to 90% of max. laboratory dry density as per IS:2720 Part-VII, cutting of trees of girth upto and inclusive of 30 cms, removal of vegetation, breaking clods, spreading in layers not exceeding 30 cms loose thickness, watering, ramming and compacting with power road rollers to give at least 90% of max. laboratory dry density, dressing, leveling, testing, etc. and disposal of unserviceable materials/surplus earth if any, as directed by Engineer-in-Charge including stacking and/or dumping and dressing the same in demarcated areas etc. complete as per specifications, drawings and directions of Engineer-in-Charge. (The leads for the above mentioned operations shall be within the boundary limit of the plant and measurement shall be taken in the cutting area only).

SAND FILLING

Supplying and filling approved SAND of specified quality under floors, in foundations, plinths, tank foundations etc. for all depths and heights including cost of sand,royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers of loose thickness not exceeding 150 mm,watering,ramming,compacting with mechanical compactors and/or other equipment to the specified levels to achive 85% relative density as per IS:2720 Part XIV,including preparation of subgrade to the required slope,providing testing apparatus and testing the degree of consolidation all complete as per drawings, specifications and direction of Engineer-in-charge.The rates shall be inclusive of the cost of all labour,material,equipments etc. all complete .

RCC HUME PIPE CULVERT

Providing, laying, jointing and testing RCC hume pipes of 500mm dia. and np3 class for culverts, road crossing, incl. excavation in all strata up to an average depth of 1 m cutting, collars jointing in 1:2 cement mortar etc. complete as per specifications and as directed by the engineer-in charge.

DEMOLITION OF R.C.C./BRICKS/STONE MASONRY.

Site clearance by demolition of R.C.C./Brickwork/Stone Masonry/Stone Soling, Flexible pavements etc. along with removing the debris and disposal of unserviceable material to any lead and staking of serviceable materials, handing over serviceable material to concerned department if required as per technical specifications and direction of Engineer-in-charge. Note: 1. Rate includes cost of all labour, tools, tackles, hire charges, royalties, levies, leads, loading/unloading, transportation, water, electric power, illumination etc. complete in all respects as per scope of work, detailed construction drawings, technical specifications and direction of Engineer-in-charge. 2. Demolition of RCC/PCC/Brick Masonry/Road will be paid in NET CUM as demolished.

ERC/IRC

Construction of ERC/IRC as per Std. including supplying and laying in position PVC pipes conforming to IS:4985 Class-I for electrical and instrumentation Road Crossings as per standard drawing and its addendum, including cutting the pipes if necessary, lowering, laying in position to proper levels, etc. embedded in M-20 grade concrete, providing proper jointing as per code requirements or manufacturer's recommendations, etc. including earth work in excavation in all types of soil except soft and hard rock, backfilling and making good the surface, including cutting of new/ existing roads and making good the same including supply of any road material if required, (Back filling with road material shall be done in 150 mm thick layers well watered and compacted), including supplying and providing in the encasement concrete, cable crossing indicator made out of 4 mm thick MS circular plate of dia. 150mm welded to 16 mm dia. MS rod of approximately 1.0 m length and painting and lettering with 2 coats of approved enamel paint of approved colour over a coat of red oxide primer etc., supply and fixing of reinforcement as per drawing, including disposal of surplus earth anywhere within plant bounDSRy limit etc. all complete as per drawings, specifications and instructions of Engineer-in-Charge.

EARTH WORK IN FOUNDATION

Earth work in Excavation below ground level for all kinds of works in ALL TYPES OF SOIL as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete.

For depth beyond 1.5m and upto & inclusive of 3.0m.

EARTHWORK IN FILLING by excavating the earth from BORROW AREAS arranged by CONTRACTOR for all leads, transporting the earth from borrow area including cleaning & stripping the earth at borrow areas, breaking clods, loading, unloading and laying at all depths and heights in layers of thickness not exceeding 15 cms., watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% of the maximum laboratory dry density, dressing, trimming, levelling the top surface etc. in foundations, plinths, trenches etc. all complete.

Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial lead of 100M including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids) i) Upto 1.0Km.

PLAIN & REINFORCED CEMENT CONCRETE:

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:4:8 by volume (1 Cement: 4 Coarse Sand: 8 Crushed Stone Aggregates/Gravels with 40mm and down size graded crushed stone aggaregates.

Concrete of nominal mix of 1:5:10 by volume (1 Cement :5 Coarse Sand : 10 Crushed Stone Aggaregates/Gravels).

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete grade M20 with 20mm and down size graded crushed stone aggaregates/Gravels. .

Providing and laying REINFORCED CEMENT CONCRETE OF M-25 GRADE with 20mm and down size graded crushed stone aggregates/gravel in SUB-STRUCTURE of all types e.g. foundations, footings, raft, beams, slabs, pile caps, retaining walls, jambs, counterforts, buttresses, trenches, manholes,pipe encasement, catchpits, drains, RCC pits, equipment/machine foundations, pedestals, pipe sleepers, columns, plinth beams, suspended floors, beams, staircases, landings, steps, brackets etc. (including single pour concreting upto 250m3), including cost of admixtures if used,providing pockets, openings, recesses, chamfering etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. all complete (excluding the Cost of Reinforcement and Shuttering) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed.

Providing and laying REINFORCED CEMENT CONCRETE OF M-25 GRADE with 20mm and down size graded crushed stone aggregates/gravel in SUPER STRUCTURE in suspended floors, slabs, beams, columns, walls including counterforts, staircases, landings, steps, facias, fins, mouldings, gutters, shelves, windowsills, canopies, lintels, girders, ducts, brackets, chajjas with drip moulds, pedestals, posts, struts, equipment/machine foundations, ramps etc. (including single pour concreting upto 250m3) including cost of admixtures if used providing pockets, openings, recesses, chamfering wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. all complete (excluding the Cost of Reinforcement and Shuttering) for all heights above plinth level in any shape, position, thickness etc. all complete as specified, shown and directed.

CONCRETE PAVEMENTS

Providing and laying Reinforced cement concrete in M-25 grade with 20mm and down size graded crushed stone aggregates in flooring, pavements etc. including leaving pockets, if necessary, making recess/drains, laying in alternate panels, etc. for all depths including shuttering, tamping, curing, etc. as specified in any shape, thickness, position and finishing the top surface smooth etc. all complete as per drawings, specifications and directions of Engineer-in-Charge (excluding cost of providing and fixing reinforcement & joint sealing).

PAVER BLOCK FLOORING

Supplying and placing in position as per approved pattern of Cement Concrete Inter locking paver block 80 mm thick of approved shape, rough finish, M-40 strength of approved brand laid over the sand bed of minimum 100 mm thick. The CC interlocking blocks to be of uniform Grey colour or as approved by EIC complete in all respects , as per technical specifications and directions of the Engineer-in-charge Note :- 1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such paver blocks, sand, earth work in excavation in cutting earth in all conditions, shuttering with all bye works and sundry works. 2. To be read with in conjunction with Particular Job Specification 3. Supply of all materials and providing labour, tools and tackles are in contractor’s scope

CENTERING & SHUTTERING Providing and fixing CENTERING AND SHUTTERING in foundations, footings, raft beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, equipment/machine foundations, pedestals, abutments, pipe sleepers, columns, plinth beams, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/bunkers/silos/ shafts/ hoppers/liquid storage structures etc. including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed.

i) For all depths below, upto & inclusive of plinth

ii) For all heights above plinth level.

REINFORCEMENT

Supplying and placing in position HIGH STRENGTH DEFORMED STEEL BARS REINFORCEMENT (conforming to IS:1786, Grade Fe 415), for R.C.C. work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with contractor's own 16 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete as directed.

STRUCTURAL STEEL WORKS

Supplying, transporting, storing, fabricating in position and testing/examining bolted and/or welded STRUCTURAL STEEL WORKS at all levels and locations including all builtup sections/compound sections made out of rolled sections and/or plates/bent plates in trusses, purlins, wind ties, wind girders, columns, portals, racks, frameworks, crane gantries, surge girders, bracings, floor beams, lifting beams, monorails, platforms, staircases (excluding chequered plates and gratings), ladders, stoppers, brackets, side runners, sagrods, supports for equipment and technological accesories and process piping, hand railings, posts, conveyor galleries, trestles, towers, masts, junction houses etc., cutting to required size, straightening/bending if required, edge preparation, cleaning, preheating, bolting/welding of joints, (including sealing the joints of box sections with continuous welding), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified, including preparation and submission of detailed fabrication drawings and applying primer after fabrication as per specification (for normal corrosive environment), etc. all complete

Supplying and applying FINISH PAINT of approved quality and shade including a coat of primer as per Specification/BIS Codes over one coat of shop primer already applied including storage, surface preparation, degreasing, cleaning, drying, touching up of shop primer coat, providing temporary staging, scaffolding, testing etc., for steel structures at all levels and locations, all complete as specified.

MISCELLANEOUS STEEL WORKS

Supplying, fabricating and erecting in position at all levels and locations bolted, screwed and/or welded M.S. CHEQUERED PLATES of any thickness in walkways, platforms, stairtreads, any other place as directed etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing, welding, preparation and submission of fabrication drawings and preparing the surfaces for painting and applying shop primer as per Specification after fabrication etc. all complete as specified and directed.

Supplying, transporting, storing, fabricating and fixing in position M.S. METAL INSERT (with lugs) of any shape made out of flats, plates, rolled sections, pipes etc. providing necessary templates, staging, cutting, straightening, if required, bolting, welding as required and embedding in position on both Plain and Reinforced Cement concrete members inclusive of adjusting shuttering & reinforcement/any other fixture, welding where necessary, tying and holding to correct level, line and position, any auxilliary dummy structures to support the heavy inserts, painting exposed surfaces with a coat of Red Oxide Zinc Chromate Primer etc. all complete for all depths and heights as specified and directed.

Supplying, fabricating and erecting in position at all levels and locations bolted, clamped and/or welded GRATING (fabricated as per standards) made out of M.S. flats/M.S. flats with M.S. rounds in walkways, platforms, stair treads etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fabricating clamps, fixing, welding, preparation and submission of fabrication drawings and preparing the surfaces for painting, surface cleaning, wire brushing, removal of mill scale, dust, rust, oil or grease and applying one shop coat of Red Oxide Zinc Chromate Primer after fabrication etc. all complete as specified and directed.

Supplying, fabricating, fixing and keeping in position at all levels and locations THREADED ANCHOR BOLTS of all diameters and nomenclature including nuts, washers, anchor plates, pipe sleeves etc. in foundations, columns, pedestals, slabs, beams, walls etc. or any other place as directed including handling & transporting, straightening if required, turning from relevant size M.S. rounds to required diameter, threading, welding, providing necessary templates and auxilliary dummy structures, if any, necessary tying and welding with reinforcement, adjustment of shuttering & reinforcement/any other fixture, greasing exposed metal surfaces, covering bolts and packing the sleeves with jute cloth etc. all complete as specified and directed.

Supplying, fabricating and fixing in position at all locations 500mm HIGH HAND RAILING (for stair cases) consisting of top rail & vertical posts (maximum spacing 1500mm c/c) with 32mm nominal diameter medium grade M.S. Tubes conforming to IS:1239 including straightening if required, cutting, bending, welding, painting with one shop coat of Red Oxide Zinc Chromate Primer, preparation and submission of fabrication drawings etc. all complete as specified, shown and directed

BRICK MASONRY

Providing and laying BRICK MASONRY WITH BRICKS OF CLASS 7.5 in cement mortar 1:4 (1 Cement : 4 Sand) in one or more brick thickness and in any shape (excluding circular/curved brick masonry) at all depths and height including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape & size, finishing the joints flush below ground level and raking out the joints above ground level, sealing the gap between masonry and soffit of beam/slab, embedding the fittings & fixtures, curing, etc. all complete as per specifications.

Providing and laying HALF BRICK MASONRY with bricks of CLASS 7.5 in cement mortar 1:4 (1 Cement : 4 Sand)in any shape, including the cost of materials, labour, scaffolding/staging, sampling and testing, soaking of bricks, cutting and laying of bricks, providing openings of any shape & size, raking out the joints, supplying and placing 2 Nos. 6mm dia. M.S. Bars at every fourth course, sealing the gap between masonry and soffit of beam/slab, embedding the fittings and fixtures, curing etc. all complete as per specification.

PLASTER

External Walls Ordinary plain cement plaster Average 18mm thick 1:4 (1 cement : 4 sand).

Internal Walls Ordinary plain cement plaster Average 12mm thick 1:4 (1 cement : 4 sand).

PAINTING OF WALLS

Painting of Internal walls:- Providing & applying 2 coats of waterproof decorative cement paint of approved make and approved shade, cleaning, including preparation of surfaces,base primer, curing etc. all complete

Painting of External walls:- Providing & applying 3 coats of waterproof decorative cement paint of approved make and approved shade, cleaning, including preparation of surfaces,base primer, curing etc. all complete

PORTA CABIN FOR GUARD ROOM

Supply & installation of porta cabin of size (2.0M X 2.0M X 3.35M) made up of approved quality steel sections/ frame work complete as per Specifications for Porta Cabins & drawing attached in bid document including associated civil foundation works.

CIVIL WORKS DULIAJAN TAP OFF

EARTHWORK IN SITE GRADING

Earthwork in excavation and filling in all types of soil except soft rock and hard rock for general site grading for all heights and depths including clearing and stripping etc. in excavation areas, removing shrubs, grass, bushes, vegetable growth and other objectionable materials, trees upto and inclusive of a girth of 30 cms. (girth measured at a height of one metre above ground level) including uprooting of roots, etc., dewatering, if necessary, sorting out the excavated soil into serviceable and unserviceable materials in excavation areas and including filling in filling areas with serviceable material for general site grading and roads for all heights and depths to proper levels, slopes, grades and camber including clearing and stripping in filling areas as per specifications, consolidating exposed natural soil to 90% of max. laboratory dry density as per IS:2720 Part-VII, cutting of trees of girth upto and inclusive of 30 cms, removal of vegetation, breaking clods, spreading in layers not exceeding 30 cms loose thickness, watering, ramming and compacting with power road rollers to give at least 90% of max. laboratory dry density, dressing, leveling, testing, etc. and disposal of unserviceable materials/surplus earth if any, as directed by Engineer-in-Charge including stacking and/or dumping and dressing the same in demarcated areas etc. complete as per specifications, drawings and directions of Engineer-in-Charge. (The leads for the above mentioned operations shall be within the boundary limit of the plant and measurement shall be taken in the cutting area only).

SAND FILLING

Supplying and filling approved SAND of specified quality under floors, in foundations, plinths, tank foundations etc. for all depths and heights including cost of sand,royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers of loose thickness not exceeding 150 mm,watering,ramming,compacting with mechanical compactors and/or other equipment to the specified levels to achive 85% relative density as per IS:2720 Part XIV,including preparation of subgrade to the required slope,providing testing apparatus and testing the degree of consolidation all complete as per drawings, specifications and direction of Engineer-in-charge.The rates shall be inclusive of the cost of all labour,material,equipments etc. all complete .

DEMOLITION OF R.C.C./BRICKS/STONE MASONRY.

Site clearance by demolition of R.C.C./Brickwork/Stone Masonry/Stone Soling, Flexible pavements etc. along with removing the debris and disposal of unserviceable material to any lead and staking of serviceable materials, handing over serviceable material to concerned department if required as per technical specifications and direction of Engineer-in-charge. Note: 1. Rate includes cost of all labour, tools, tackles, hire charges, royalties, levies, leads, loading/unloading, transportation, water, electric power, illumination etc. complete in all respects as per scope of work, detailed construction drawings, technical specifications and direction of Engineer-in-charge. 2. Demolition of RCC/PCC/Brick Masonry/Road will be paid in NET CUM as demolished.

EARTH WORK IN FOUNDATION

Earth work in Excavation below ground level for all kinds of works in ALL TYPES OF SOIL as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete.

For depth beyond 1.5m and upto & inclusive of 3.0m.

EARTHWORK IN FILLING by excavating the earth from BORROW AREAS arranged by CONTRACTOR for all leads, transporting the earth from borrow area including cleaning & stripping the earth at borrow areas, breaking clods, loading, unloading and laying at all depths and heights in layers of thickness not exceeding 15 cms., watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% of the maximum laboratory dry density, dressing, trimming, levelling the top surface etc. in foundations, plinths, trenches etc. all complete.

Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial lead of 100M including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids) i) Upto 1.0Km.

PLAIN & REINFORCED CEMENT CONCRETE:

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:4:8 by volume (1 Cement: 4 Coarse Sand: 8 Crushed Stone Aggregates/Gravels with 40mm and down size graded crushed stone aggaregates.

Concrete of nominal mix of 1:5:10 by volume (1 Cement :5 Coarse Sand : 10 Crushed Stone Aggaregates/Gravels).

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete grade M20 with 20mm and down size graded crushed stone aggaregates/Gravels. .

Providing and laying REINFORCED CEMENT CONCRETE OF M-25 GRADE with 20mm and down size graded crushed stone aggregates/gravel in SUB-STRUCTURE of all types e.g. foundations, footings, raft, beams, slabs, pile caps, retaining walls, jambs, counterforts, buttresses, trenches, manholes,pipe encasement, catchpits, drains, RCC pits, equipment/machine foundations, pedestals, pipe sleepers, columns, plinth beams, suspended floors, beams, staircases, landings, steps, brackets etc. (including single pour concreting upto 250m3), including cost of admixtures if used,providing pockets, openings, recesses, chamfering etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. all complete (excluding the Cost of Reinforcement and Shuttering) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed.

Providing and laying REINFORCED CEMENT CONCRETE OF M-25 GRADE with 20mm and down size graded crushed stone aggregates/gravel in SUPER STRUCTURE in suspended floors, slabs, beams, columns, walls including counterforts, staircases, landings, steps, facias, fins, mouldings, gutters, shelves, windowsills, canopies, lintels, girders, ducts, brackets, chajjas with drip moulds, pedestals, posts, struts, equipment/machine foundations, ramps etc. (including single pour concreting upto 250m3) including cost of admixtures if used providing pockets, openings, recesses, chamfering wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. all complete (excluding the Cost of Reinforcement and Shuttering) for all heights above plinth level in any shape, position, thickness etc. all complete as specified, shown and directed.

CONCRETE PAVEMENTS

Providing and laying Reinforced cement concrete in M-25 grade with 20mm and down size graded crushed stone aggregates in flooring, pavements etc. including leaving pockets, if necessary, making recess/drains, laying in alternate panels, etc. for all depths including shuttering, tamping, curing, etc. as specified in any shape, thickness, position and finishing the top surface smooth etc. all complete as per drawings, specifications and directions of Engineer-in-Charge (excluding cost of providing and fixing reinforcement & joint sealing).

CENTERING & SHUTTERING Providing and fixing CENTERING AND SHUTTERING in foundations, footings, raft beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, equipment/machine foundations, pedestals, abutments, pipe sleepers, columns, plinth beams, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/bunkers/silos/ shafts/ hoppers/liquid storage structures etc. including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed.

i) For all depths below, upto & inclusive of plinth

ii) For all heights above plinth level.

REINFORCEMENT

Supplying and placing in position HIGH STRENGTH DEFORMED STEEL BARS REINFORCEMENT (conforming to IS:1786, Grade Fe 415), for R.C.C. work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with contractor's own 16 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete as directed.

STRUCTURAL STEEL WORKS

Supplying, transporting, storing, fabricating in position and testing/examining bolted and/or welded STRUCTURAL STEEL WORKS at all levels and locations including all builtup sections/compound sections made out of rolled sections and/or plates/bent plates in trusses, purlins, wind ties, wind girders, columns, portals, racks, frameworks, crane gantries, surge girders, bracings, floor beams, lifting beams, monorails, platforms, staircases (excluding chequered plates and gratings), ladders, stoppers, brackets, side runners, sagrods, supports for equipment and technological accesories and process piping, hand railings, posts, conveyor galleries, trestles, towers, masts, junction houses etc., cutting to required size, straightening/bending if required, edge preparation, cleaning, preheating, bolting/welding of joints, (including sealing the joints of box sections with continuous welding), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified, including preparation and submission of detailed fabrication drawings and applying primer after fabrication as per specification (for normal corrosive environment), etc. all complete

Supplying and applying FINISH PAINT of approved quality and shade including a coat of primer as per Specification/BIS Codes over one coat of shop primer already applied including storage, surface preparation, degreasing, cleaning, drying, touching up of shop primer coat, providing temporary staging, scaffolding, testing etc., for steel structures at all levels and locations, all complete as specified.

MISCELLANEOUS STEEL WORKS

Supplying, fabricating and erecting in position at all levels and locations bolted, screwed and/or welded M.S. CHEQUERED PLATES of any thickness in walkways, platforms, stairtreads, any other place as directed etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing, welding, preparation and submission of fabrication drawings and preparing the surfaces for painting and applying shop primer as per Specification after fabrication etc. all complete as specified and directed.

Supplying, transporting, storing, fabricating and fixing in position M.S. METAL INSERT (with lugs) of any shape made out of flats, plates, rolled sections, pipes etc. providing necessary templates, staging, cutting, straightening, if required, bolting, welding as required and embedding in position on both Plain and Reinforced Cement concrete members inclusive of adjusting shuttering & reinforcement/any other fixture, welding where necessary, tying and holding to correct level, line and position, any auxilliary dummy structures to support the heavy inserts, painting exposed surfaces with a coat of Red Oxide Zinc Chromate Primer etc. all complete for all depths and heights as specified and directed.

Supplying, fabricating, fixing and keeping in position at all levels and locations THREADED ANCHOR BOLTS of all diameters and nomenclature including nuts, washers, anchor plates, pipe sleeves etc. in foundations, columns, pedestals, slabs, beams, walls etc. or any other place as directed including handling & transporting, straightening if required, turning from relevant size M.S. rounds to required diameter, threading, welding, providing necessary templates and auxilliary dummy structures, if any, necessary tying and welding with reinforcement, adjustment of shuttering & reinforcement/any other fixture, greasing exposed metal surfaces, covering bolts and packing the sleeves with jute cloth etc. all complete as specified and directed.

ELECTRICAL WORKS

ELECTRICAL WORKS THORAMUKH

SUPPLY INSTALLATION ,TESTING AND COMMISSIONING

Wiring for light point with 1.5 sq. mm FRLS PVC insulated copper conductor three core cable/wire in surface/ recesses steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FR PVC insulated copper conductor single/ three core cable/wire etc as required.

Wiring for FLP 300 mm dia Exhaust Fan point with 1.5 sq. mm FRLS PVC insulated copper conductor three core cable/wire in surface/ recesses steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FR PVC insulated copper conductor single/ three core cable/wire complete with FLP Junction box. etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.

Supplying and fixing 16 amps, 240 volts, SPN, industrial type switch socket outlet, with 2 poles and earth metal enclosed plug top along with 16 amps.rotary switch in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 32 amps, 240 volts, SPN, industrial type switch socket outlet, with 2 poles and earth metal enclosed plug top along with 32 amps. "C" series, SP MCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit 100mm dia

DISTRIBUTION PANELS, DISTRIBUTION BOARD & ISOLATORS :

Supply,Installation,Testing and Commissioning of Electrical / Control Panels suitable for 415 Volt,3phase,4wire 50Hz AC supply system fabricated in compartmentlized from CRCA sheet steel not less than 2mm thick duly treated with 7 tanks process, powder coated with approved shade and oven dried . The complete panel will have a short circuit with stand capacity of 25 kA for 1 Second, IP 42 rating. It will have a suitable MS base channel powder coated. The panel will be fabricated in transportable sections. The panel shall have a common copper earth bar of size 25mm x 5mm at the rear with 2 Nos. earth studs. The LT panel will have suitable arrangement for bus-ducting/ cable termination into various incoming/outgoing switchgear as required. Cable termination will be at suitable terminal block at top/bottom of the panel and from the terminal block to switch, connection will be made with solid insulated strip/PVC insulated copper conductor cable of required current rating as required.

MEDB AS PER SLD (DWG NO- 1009-TH-EL-SLD -4001)

UPS Distribution Panel PER SLD (DWG NO- 1009-TH-EL-SLD-4001)

OUTDOOR LTG. PANEL PER SLD (DWG NO- 1009-TH-EL-SLD-4001)

EARTHING & LIGHTNING SYSTEM :

Supplying and Earthing with Copper earth plate 600mm x 600 mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc, with charcoal / coke and salt as required.

Supplying and Earthing with GI earth pipe, 3.0 mtr long, 100mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement etc, (with charcoal and salt ) as required.

Supply and Laying of 50mm X 6 mm G.I strip complete with all accessories.

Supply and Laying of 25mm X 3 mm G.I strip complete with all accessories.

Supply and Laying of 25mm X 3 mm Cu strip complete with all accessories.

Providing and Laying of 10 Sqmm Cu "Ar" Cable complete with all accessories.

Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long GI tube having single prong at top with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required.

Providing and fixing of GI strip of 25 x 3 mm thick on parapet or surface of wall for lightning conductor complete with joints and other accessories as required.(for horizental run)

Providing and fixing of GI Tape of 25 x 3 mm thick on parapet or surface of wall for lightning conductor complete with joints and other accessories as required.(for vertical run)

CABLE & TERMINATIONS :

Supplying, and laying of aluminium conductor XLPE insulated armoured served sheated cables 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamp etc. of suitable size or as directed by engineer incharge, complete in all respect, the armouring of the cable shall be properly connected with the earth conductor by clamps etc.

3.5 x 95 sq.mm. Aluminium Cable

3.5 x70 sq.mm. Aluminium Cable

4.0 x 25 sq.mm. Aluminium Cable

3.5 x 16 sq.mm. Aluminium Cable

Supplying, and laying of Copper conductor XLPE insulated armoured served sheated cables 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamp etc. of suitable size or as directed by engineer incharge, complete in all respect, the armouring of the cable shall be properly connected with the earth conductor by clamps etc.

3.5 x 10 sq.mm. Copper Cable

3C x 6 sq.mm. Copper Cable

3.0 x 2.5 sq.mm. Copper Cable(FLEXIBLE CABLE)

Supplying and making end terminations with brass compression glands and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5 x 95 sq.mm. Aluminium Cable

3.5 x70 sq.mm. Aluminium Cable

4.0 x 25 sq.mm. Aluminium Cable

4.0 x 16 sq.mm. Aluminium Cable

4.0 x 10 sq.mm. Copper Cable

3 x 2.5 sq.mm. Copper Cable

3.0 x 6 sq.mm. Copper Cable

3.5 x 95 sq.mm. Aluminium Cable

3.5 x70 sq.mm. Aluminium Cable

4.0 x 25 sq.mm. Aluminium Cable

4.0 x 16 sq.mm. Aluminium Cable

4.0 x 10 sq.mm. Copper Cable

3 x 2.5 sq.mm. Copper Cable

3.0 x 6 sq.mm. Copper Cable

FANS, EXHAUST FANS, AC & LIGHT FITTINGS :

Supply and Fixing of recessed mounted 2 x 36 W LED industrial decorative fixture complete in all respects.

Supply and Fixing of 150 W FLP LED Flood light fixture complete with lamp and all accessories.

Supply and Fixing of 9mtr. High pole with suitable size of junction box including wiring of 3 x 2.5 sqmm from junction box to fixture complete with all accessories.

Supply and Fixing of 125 W LED FLP light fixture with suitable size of junction box including wiring of 3 x 2.5 sqmm from junction box to fixture complete with lamp and all accessories.

Supply and Fixing of 4.5 mtr. High pole with suitable size of junction box including wiring of 3 x 2.5 sqmm from junction box to fixture complete with all accessories.

Supply, installation, testing & commissioning of 2 X 5 KVA UPS Uninterrupted power supply system (230 V, AC, 1 Ph, N, Redundancy Parallel redundant UPS) along with nickel cadmium battery bank (VRPP/VRFP battery bank, as per specification and datasheet) suitable for sufficient backup time at full load.

Supply, installation, testing and Commissioning of Ni-Cd batteries ( 2 x50%Nos.) for 6 hours back up time at 2x 5 KVA load, battery charger of suitable capacity, battery MCB, , Battery racks,connectors and accessories, cable from UPS to batteries etc.

SOLAR PANEL WITH BATTERY BACKUP

Solar power supply system Outgoing shall be 5 KVA, 230 V, AC, 1 Ph, N, (Solar Panels have redundancy Parallel redundant 2 nos X 100 % rating & Charge controller have 2 nos X 200% ratings) along with additional Battery charger & nickel cadmium battery bank (VRPP/VRFP battery banks suitable for solar charging, as per specification and datasheet) suitable for sufficient backup time at full load shall be provided. for meeting critical loads that cannot withstand even a momentary interruption in voltage. Following loads shall be connected to the Solar power system. Battery Banks (2Nos. x 50% Ni-Cd Battery bank for 72 hours battery backup for each battery banks).

FORE POLE STRUCTURE& OHL LINES

Four pole structure

RCC pole 9 meter(As per SEB Std.)

Disc insulator(3NOS)

Pin insulator(3 NOS)

AB switch(200A) With ON /OFF Assembly(Unit rates)

DO fuse(3NOS)

Arms, MS clamps,nut- bolt, supporting chanels& structures( Unit rates)

EARTHING -25X6 GI strip, 10 m. with fixing Accessories( Unit Rates)

100 A MCCB With box

160 A MCCB With box

250 A MCCB With box

HT Metering Set with ,CT*& PT SET( Unit Rates)

Stay set and insulator set with wire and Accessories(Unit Rates)

Lightning Arrester( 1 NOS, 9KA Appx.)

OHL LINE

RCC pole 9 meter( Unit Rates)

ACSR Conductor (RA Type)/KM.( Unit Rates)

Disc insulator

Pin insulator

Arms, MS clamps,nut- bolt, supporting chanels& structures( Unit rates)

GuardWIRE(Unit rates)

Stay Set with insulator wire ,bucckle(Unit rates)

11/.415 kV 50 KVA Transformer

11kV 3CX150 MM2 AL,XLPE CABLE

Insulator set((Unit rates)

Excavation and back filling of trenches for cables, street light pole and earth strips etc. for a maximum depth of 1.00 mtrs for cables and for earth strips including shoring, strutting, dewatering, consolidation including all labour, materials to complete installation work in all respect

Steel Structure Anagle Chanels

Chequred plate

Rubber mates(2mtX1Mtr, 1.1 KV)

Tubewell with starters& Control panels

Eath pit Excavation Civil Works

Lighting Switch board

Cable Tray 600mm

Cable Tray 300mm

ELECTRICAL WORKKS HALMIRAMUKH

SUPPLY INSTALLATION ,TESTING AND COMMISSIONING

Wiring for light point with 1.5 sq. mm FRLS PVC insulated copper conductor three core cable/wire in surface/ recesses steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FR PVC insulated copper conductor single/ three core cable/wire etc as required.

Wiring for FLP 300 mm dia Exhaust Fan point with 1.5 sq. mm FRLS PVC insulated copper conductor three core cable/wire in surface/ recesses steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FR PVC insulated copper conductor single/ three core cable/wire complete with FLP Junction box. etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.

Supplying and fixing 16 amps, 240 volts, SPN, industrial type switch socket outlet, with 2 poles and earth metal enclosed plug top along with 16 amps.rotary switch in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 32 amps, 240 volts, SPN, industrial type switch socket outlet, with 2 poles and earth metal enclosed plug top along with 32 amps. "C" series, SP MCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit 100mm dia

DISTRIBUTION PANELS, DISTRIBUTION BOARD & ISOLATORS :

Supply,Installation,Testing and Commissioning of Electrical / Control Panels suitable for 415 Volt,3phase,4wire 50Hz AC supply system fabricated in compartmentlized from CRCA sheet steel not less than 2mm thick duly treated with 7 tanks process, powder coated with approved shade and oven dried . The complete panel will have a short circuit with stand capacity of 25 kA for 1 Second, IP 42 rating. It will have a suitable MS base channel powder coated. The panel will be fabricated in transportable sections. The panel shall have a common copper earth bar of size 25mm x 5mm at the rear with 2 Nos. earth studs. The LT panel will have suitable arrangement for bus-ducting/ cable termination into various incoming/outgoing switchgear as required. Cable termination will be at suitable terminal block at top/bottom of the panel and from the terminal block to switch, connection will be made with solid insulated strip/PVC insulated copper conductor cable of required current rating as required.

MEDB AS PER SLD (DWG NO- 1009-HA-EL-SLD -4001)

UPS Distribution Panel PER SLD (DWG NO- 1009-HA-EL-SLD-4001)

OUTDOOR LTG. PANEL PER SLD (DWG NO- 1009-HA-EL-SLD-4001)

EARTHING & LIGHTNING SYSTEM :

Supplying and Earthing with Copper earth plate 600mm x 600 mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc, with charcoal / coke and salt as required.

Supplying and Earthing with GI earth pipe, 3.0 mtr long, 100mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement etc, (with charcoal and salt ) as required.

Supply and Laying of 50mm X 6 mm G.I strip complete with all accessories.

Supply and Laying of 25mm X 3 mm G.I strip complete with all accessories.

Supply and Laying of 25mm X 3 mm Cu strip complete with all accessories.

Providing and Laying of 10 Sqmm Cu "Ar" Cable complete with all accessories.

Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long GI tube having single prong at top with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required.

Providing and fixing of GI strip of 25 x 3 mm thick on parapet or surface of wall for lightning conductor complete with joints and other accessories as required.(for horizental run)

Providing and fixing of GI Tape of 25 x 3 mm thick on parapet or surface of wall for lightning conductor complete with joints and other accessories as required.(for vertical run)

CABLE & TERMINATIONS :

Supplying, and laying of aluminium conductor XLPE insulated armoured served sheated cables 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamp etc. of suitable size or as directed by engineer incharge, complete in all respect, the armouring of the cable shall be properly connected with the earth conductor by clamps etc.

3.5 x 95 sq.mm. Aluminium Cable

3.5 x70 sq.mm. Aluminium Cable

4.0 x 25 sq.mm. Aluminium Cable

3.5 x 16 sq.mm. Aluminium Cable

Supplying, and laying of Copper conductor XLPE insulated armoured served sheated cables 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamp etc. of suitable size or as directed by engineer incharge, complete in all respect, the armouring of the cable shall be properly connected with the earth conductor by clamps etc.

3.5 x 10 sq.mm. Copper Cable

3C x 6 sq.mm. Copper Cable

3.0 x 2.5 sq.mm. Copper Cable(FLEXIBLE CABLE)

Supplying and making end terminations with brass compression glands and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5 x 95 sq.mm. Aluminium Cable

3.5 x70 sq.mm. Aluminium Cable

4.0 x 25 sq.mm. Aluminium Cable

4.0 x 16 sq.mm. Aluminium Cable

4.0 x 10 sq.mm. Copper Cable

3 x 2.5 sq.mm. Copper Cable

3.0 x 6 sq.mm. Copper Cable

3.5 x 95 sq.mm. Aluminium Cable

3.5 x70 sq.mm. Aluminium Cable

4.0 x 25 sq.mm. Aluminium Cable

4.0 x 16 sq.mm. Aluminium Cable

4.0 x 10 sq.mm. Copper Cable

3 x 2.5 sq.mm. Copper Cable

3.0 x 6 sq.mm. Copper Cable

FANS, EXHAUST FANS, AC & LIGHT FITTINGS :

Supply and Fixing of recessed mounted 2 x 36 W LED industrial decorative fixture complete in all respects.

Supply and Fixing of 150 W FLP LED Flood light fixture complete with lamp and all accessories.

Supply and Fixing of 9mtr. High pole with suitable size of junction box including wiring of 3 x 2.5 sqmm from junction box to fixture complete with all accessories.

Supply and Fixing of 125 W LED FLP light fixture with suitable size of junction box including wiring of 3 x 2.5 sqmm from junction box to fixture complete with lamp and all accessories.

Supply and Fixing of 4.5 mtr. High pole with suitable size of junction box including wiring of 3 x 2.5 sqmm from junction box to fixture complete with all accessories.

Supply, installation, testing & commissioning of 2 X 5 KVA UPS Uninterrupted power supply system (230 V, AC, 1 Ph, N, Redundancy Parallel redundant UPS) along with nickel cadmium battery bank (VRPP/VRFP battery bank, as per specification and datasheet) suitable for sufficient backup time at full load.

Supply, installation, testing and Commissioning of Ni-Cd batteries ( 2 x50%Nos.) for 6 hours back up time at 2x 5 KVA load, battery charger of suitable capacity, battery MCB, , Battery racks,connectors and accessories, cable from UPS to batteries etc.

SOLAR PANEL WITH BATTERY BACKUP

Solar power supply system Outgoing shall be 5 KVA, 230 V, AC, 1 Ph, N, (Solar Panels have redundancy Parallel redundant 2 nos X 100 % rating & Charge controller have 2 nos X 200% ratings) along with additional Battery charger & nickel cadmium battery bank (VRPP/VRFP battery banks suitable for solar charging, as per specification and datasheet) suitable for sufficient backup time at full load shall be provided. for meeting critical loads that cannot withstand even a momentary interruption in voltage. Following loads shall be connected to the Solar power system. Battery Banks (2Nos. x 50% Ni-Cd Battery bank for 72 hours battery backup for each battery banks).

FORE POLE STRUCTURE& OHL LINES

Four pole structure

RCC pole 9 meter(As per SEB Std.)

Disc insulator(3NOS)

Pin insulator(3 NOS)

AB switch(200A) With ON /OFF Assembly(Unit rates)

DO fuse(3NOS)

Arms, MS clamps,nut- bolt, supporting chanels& structures( Unit rates)

EARTHING -25X6 GI strip, 10 m. with fixing Accessories( Unit Rates)

100 A MCCB With box

160 A MCCB With box

250 A MCCB With box

HT Metering Set with ,CT*& PT SET( Unit Rates)

Stay set and insulator set with wire and Accessories(Unit Rates)

Lightning Arrester( 1 NOS, 9KA Appx.)

OHL LINE

RCC pole 9 meter( Unit Rates)

ACSR Conductor (RA Type)/KM.( Unit Rates)

Disc insulator

Pin insulator

Arms, MS clamps,nut- bolt, supporting chanels& structures( Unit rates)

GuardWIRE(Unit rates)

Stay Set with insulator wire ,bucckle(Unit rates)

11/.415 kV 50 KVA Transformer

11kV 3CX150 MM2 AL,XLPE CABLE

Insulator set((Unit rates)

Excavation and back filling of trenches for cables, street light pole and earth strips etc. for a maximum depth of 1.00 mtrs for cables and for earth strips including shoring, strutting, dewatering, consolidation including all labour, materials to complete installation work in all respect

Steel Structure Anagle Chanels

Chequred plate

Rubber mates(2mtX1Mtr, 1.1 KV)

Tubewell with starters& Control panels

Eath pit Excavation Civil Works

Lighting Switch board

Cable Tray 600mm

Cable Tray 300mm

ELECTRICAL WORKS NUMALIGARH

SUPPLY INSTALLATION ,TESTING AND COMMISSIONING

Wiring for light point with 1.5 sq. mm FRLS PVC insulated copper conductor three core cable/wire in surface/ recesses steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FR PVC insulated copper conductor single/ three core cable/wire etc as required.

Wiring for FLP 300 mm dia Exhaust Fan point with 1.5 sq. mm FRLS PVC insulated copper conductor three core cable/wire in surface/ recesses steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FR PVC insulated copper conductor single/ three core cable/wire complete with FLP Junction box. etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.

Supplying and fixing 16 amps, 240 volts, SPN, industrial type switch socket outlet, with 2 poles and earth metal enclosed plug top along with 16 amps.rotary switch in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 32 amps, 240 volts, SPN, industrial type switch socket outlet, with 2 poles and earth metal enclosed plug top along with 32 amps. "C" series, SP MCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit 100mm dia

DISTRIBUTION PANELS, DISTRIBUTION BOARD & ISOLATORS :

Supply,Installation,Testing and Commissioning of Electrical / Control Panels suitable for 415 Volt,3phase,4wire 50Hz AC supply system fabricated in compartmentlized from CRCA sheet steel not less than 2mm thick duly treated with 7 tanks process, powder coated with approved shade and oven dried . The complete panel will have a short circuit with stand capacity of 25 kA for 1 Second, IP 42 rating. It will have a suitable MS base channel powder coated. The panel will be fabricated in transportable sections. The panel shall have a common copper earth bar of size 25mm x 5mm at the rear with 2 Nos. earth studs. The LT panel will have suitable arrangement for bus-ducting/ cable termination into various incoming/outgoing switchgear as required. Cable termination will be at suitable terminal block at top/bottom of the panel and from the terminal block to switch, connection will be made with solid insulated strip/PVC insulated copper conductor cable of required current rating as required.

MEDB AS PER SLD (DWG NO- 1009-NU-EL-SLD -4001)

UPS Distribution Panel PER SLD (DWG NO- 1009-NU-EL-SLD-4001)

OUTDOOR LTG. PANEL PER SLD (DWG NO- 1009-NU-EL-SLD-4001)

EARTHING & LIGHTNING SYSTEM :

Supplying and Earthing with Copper earth plate 600mm x 600 mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc, with charcoal / coke and salt as required.

Supplying and Earthing with GI earth pipe, 3.0 mtr long, 100mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement etc, (with charcoal and salt ) as required.

Supply and Laying of 50mm X 6 mm G.I strip complete with all accessories.

Supply and Laying of 25mm X 3 mm G.I strip complete with all accessories.

Supply and Laying of 25mm X 3 mm Cu strip complete with all accessories.

Providing and Laying of 10 Sqmm Cu "Ar" Cable complete with all accessories.

Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long GI tube having single prong at top with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required.

Providing and fixing of GI strip of 25 x 3 mm thick on parapet or surface of wall for lightning conductor complete with joints and other accessories as required.(for horizental run)

Providing and fixing of GI Tape of 25 x 3 mm thick on parapet or surface of wall for lightning conductor complete with joints and other accessories as required.(for vertical run)

CABLE & TERMINATIONS :

Supplying, and laying of aluminium conductor XLPE insulated armoured served sheated cables 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamp etc. of suitable size or as directed by engineer incharge, complete in all respect, the armouring of the cable shall be properly connected with the earth conductor by clamps etc.

3.5 x 95 sq.mm. Aluminium Cable

3.5 x70 sq.mm. Aluminium Cable

4.0 x 25 sq.mm. Aluminium Cable

4 x 16 sq.mm. Aluminium Cable

Supplying, and laying of Copper conductor XLPE insulated armoured served sheated cables 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamp etc. of suitable size or as directed by engineer incharge, complete in all respect, the armouring of the cable shall be properly connected with the earth conductor by clamps etc.

4 x 10 sq.mm. Copper Cable

3C x 6 sq.mm. Copper Cable

3.0 x 2.5 sq.mm. Copper Cable(FLEXIBLE CABLE)

Supplying and making end terminations with brass compression glands and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5 x 95 sq.mm. Aluminium Cable

3.5 x70 sq.mm. Aluminium Cable

4.0 x 25 sq.mm. Aluminium Cable

4 x 16 sq.mm. Aluminium Cable

4 x 10 sq.mm. Copper Cable

3C x 6 sq.mm. Copper Cable

3.0 x 2.5 sq.mm. Copper Cable(FLEXIBLE CABLE)

3.5 x 95 sq.mm. Aluminium Cable

3.5 x70 sq.mm. Aluminium Cable

4.0 x 25 sq.mm. Aluminium Cable

4 x 16 sq.mm. Aluminium Cable

4 x 10 sq.mm. Copper Cable

3C x 6 sq.mm. Copper Cable

3.0 x 2.5 sq.mm. Copper Cable(FLEXIBLE CABLE)

FANS, EXHAUST FANS, AC & LIGHT FITTINGS :

Supply and Fixing of recessed mounted 2 x 36 W LED industrial decorative fixture complete in all respects.

Supply and Fixing of 150 W FLP LED Flood light fixture complete with lamp and all accessories.

Supply and Fixing of 9mtr. High pole with suitable size of junction box including wiring of 3 x 2.5 sqmm from junction box to fixture complete with all accessories.

Supply and Fixing of 125 W LED FLP light fixture with suitable size of junction box including wiring of 3 x 2.5 sqmm from junction box to fixture complete with lamp and all accessories.

Supply and Fixing of 4.5 mtr. High pole with suitable size of junction box including wiring of 3 x 2.5 sqmm from junction box to fixture complete with all accessories.

Supply, installation, testing & commissioning of 2 X 5 KVA UPS Uninterrupted power supply system (230 V, AC, 1 Ph, N, Redundancy Parallel redundant UPS) along with nickel cadmium battery bank (VRPP/VRFP battery bank, as per specification and datasheet) suitable for sufficient backup time at full load.

Supply, installation, testing and Commissioning of Ni-Cd batteries ( 2 x50%Nos.) for 6 hours back up time at 2x 5 KVA load, battery charger of suitable capacity, battery MCB, , Battery racks,connectors and accessories, cable from UPS to batteries etc.

SOLAR PANEL WITH BATTERY BACKUP

Solar power supply system Outgoing shall be 5 KVA, 230 V, AC, 1 Ph, N, (Solar Panels have redundancy Parallel redundant 2 nos X 100 % rating & Charge controller have 2 nos X 200% ratings) along with additional Battery charger & nickel cadmium battery bank (VRPP/VRFP battery banks suitable for solar charging, as per specification and datasheet) suitable for sufficient backup time at full load shall be provided. for meeting critical loads that cannot withstand even a momentary interruption in voltage. Following loads shall be connected to the Solar power system. Battery Banks (2Nos. x 50% Ni-Cd Battery bank for 72 hours battery backup for each battery banks).

FORE POLE STRUCTURE& OHL LINES

Four pole structure

RCC pole 9 meter(As per SEB Std.)

Disc insulator(3NOS)

Pin insulator(3 NOS)

AB switch(200A) With ON /OFF Assembly(Unit rates)

DO fuse(3NOS)

Arms, MS clamps,nut- bolt, supporting chanels& structures( Unit rates)

EARTHING -25X6 GI strip, 10 m. with fixing Accessories( Unit Rates)

100 A MCCB With box

160 A MCCB With box

250 A MCCB With box

HT Metering Set with ,CT*& PT SET( Unit Rates)

Stay set and insulator set with wire and Accessories(Unit Rates)

Lightning Arrester( 1 NOS, 9KA Appx.)

OHL LINE

RCC pole 9 meter( Unit Rates)

ACSR Conductor (RA Type)/KM.( Unit Rates)

Disc insulator

Pin insulator

Arms, MS clamps,nut- bolt, supporting chanels& structures( Unit rates)

GuardWIRE(Unit rates)

Stay Set with insulator wire ,bucckle(Unit rates)

11/.415 kV 50 KVA Transformer

11kV 3CX150 MM2 AL,XLPE CABLE

Insulator set((Unit rates)

Excavation and back filling of trenches for cables, street light pole and earth strips etc. for a maximum depth of 1.00 mtrs for cables and for earth strips including shoring, strutting, dewatering, consolidation including all labour, materials to complete installation work in all respect

Steel Structure Anagle Chanels

Chequred plate

Rubber mates(2mtX1Mtr, 1.1 KV)

Tubewell with starters& Control panels

Eath pit Excavation Civil Works

Lighting Switch board

Cable Tray 600mm

Cable Tray 300mm

ELECTRICAL WORKS DULIAJAN TAP OFF

SUPPLY INSTALLATION ,TESTING AND COMMISSIONING

5 Meter Solar light pole with battery backup along with FLP lighting fixture , all required accessories complete in all respect.

Supply and Laying of 50mm X 6 mm G.I strip complete with all accessories.

Supply and Laying of 25mm X 3 mm G.I strip complete with all accessories.

Supplying and Earthing with GI earth pipe, 3.0 mtr long, 100mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement etc, (with charcoal and salt ) as required.

INSTRUMENTATION WORKS

INSTRUMENTATION WORKS THORAMUKH

Supply, Calibration and Installation of instrumentation items listed below: (For details, refer instrumentation specifications)

Pressure Gauge of different Range and rating as per Installation standard, specs, data sheets & P&IDs. Bourdon type with 2-way manifold, direct mount, 150mm dial, wetted part SS316, IP 67 rated, blow out protection and shatter proof heavy duty glass. Inclusive of supply and installation of necessary accessories such as SS316 tubing and tube fittings and manifold hydraulic testing as per datasheets, standard specifications, standard installation drawings and P&ID attached with this tender.

Pressure Transmitter of different range and rating as per Installation standard, specs, data sheets & P&IDs. Smart HART, Ex'ia', IP-67 rated, 24 VDC 2-wire loop powered, direct mount with 2-way manifold. Inclusive of supply and installation of necessary accessories such as SS316 tubing and tube fittings and manifold hydraulic testing as per datasheets, standard specifications, standard installation drawings and P&ID attached with this tender.

Temperature Transmitter as per Installation standard, specs, data sheets & P&IDs. Smart HART, Ex'ia', IP-67 rated, 24 VDC 2-wire loop powered, RTD element with screwed head, 11/2" 600# thermowell of suitable insertion length. Inclusive of supply and installation of necessary accessories as per datasheets, standard specifications, standard installation drawings and P&ID attached with this tender.

Temperature Transmitter - Skin type as per Installation standard, specs, data sheets & P&IDs. Smart HART, Ex'ia', IP-67 rated, 24 VDC 2-wire loop powered, PT-100, RTD, 3-wire, duplex type elements, head certified with IP67, Ex'ia', 1/2" NPTF X 2nos. cable enteries, weldpad material & its dimensions API 5L GR.X-52 PSL2 / 50mm (L) x 25mm(W) x 25mm (Thick) - Rectangular with Radius to suit Pipe OD . Inclusive of supply and installation of necessary accessories as per datasheets, standard specifications, standard installation drawings and P&ID attached with this tender.

Supply, installation of Corrosion Probes (Strip type) and their accessories inclusive of supply of necessary 2" Access fittings including cabling, termination, glanding, dressing, mounting

Supply, installation of Corrosion Coupons (3" strip type) and their accessories inclusive of supply of necessary 2" Access fittings.

Supply, installation of Electrical Resistance Probes (Intrusive type) and their accessories inclusive of supply of necessary 2" Access fittings.

Termination & Testing of EHOV actuator of valve size 6" 300# as per site requirement Installation of Valve Actuators (EHOV), Valve Junction boxl and their accessories inclusive of supply of necessary piping/tubing along with necessary Tubing and tube fittings, including cabling, glanding, termination, earthing. Note: Installation of Valve with Actuator is considered part of Piping SOR.

Termination & Testing of Electrical actuator - Motor operated valve of size 6" 300# as per site requirement. Installation of Electrical actuator and their accessories inclusive of supply of necessary cable glands, terminals and complete with cabling, glanding, termination and earthing followed by testing and commissioning of complete Electrical actuator. Note: Installation of Valve with Actuator is considered part of Piping SOR.

Supply & Installation of Cables, Cables Trays and Junction boxes Supply, laying, installation, erection of signals cable from field instruments to junction boxes including termination, ferruling, dressing etc. Supply of cable trays, cables glands, junction boxes, erection materials, cable ferrules, cable lugs, cable tie. Installation and erection of cable trays and junction boxes.

1P X 1 .5 Sq. mm, Flame retardant,Over all Screened

1P X 1 .5 Sq. mm, Fire resistant,Over all Screened

6P X 1 .5 Sq. mm, Flame retardant,Individual Screened, Over all Screened

6P X 1 .5 Sq. mm, Flame retardant, Over all Screened

12P X 1 .5 Sq. mm, Flame retardant,Individual Screened, Over all Screened

1T X 2 .5 Sq. mm , Fire resistant,Over all Screened

6T X 2 .5 Sq. mm , Fire resistant,Over all Screened

6P X 1 .5 Sq. mm, Fire resistant,Over all Screened,Individual Screened, Over all Screened

Junction Box - Analog JB, IP-67, Ex'd'

Junction Box - Digital JB, IP-67, Ex'd'

Cable Trays (100 mm wide x 50 mm height), Perforated Type

Cable Trays (300 mm wide x 50 mm height), Perforated Type

INSTRUMENTATION WORKS HALMIRAMUKH

Supply, Calibration and Installation of instrumentation items listed below: (For details, refer instrumentation specifications)

Pressure Gauge of different Range and rating as per Installation standard, specs, data sheets & P&IDs. Bourdon type with 2-way manifold, direct mount, 150mm dial, wetted part SS316, IP 67 rated, blow out protection and shatter proof heavy duty glass. Inclusive of supply and installation of necessary accessories such as SS316 tubing and tube fittings and manifold hydraulic testing as per datasheets, standard specifications, standard installation drawings and P&ID attached with this tender.

Pressure Transmitter of different range and rating as per Installation standard, specs, data sheets & P&IDs. Smart HART, Ex'ia', IP-67 rated, 24 VDC 2-wire loop powered, direct mount with 2-way manifold. Inclusive of supply and installation of necessary accessories such as SS316 tubing and tube fittings and manifold hydraulic testing as per datasheets, standard specifications, standard installation drawings and P&ID attached with this tender.

Temperature Transmitter as per Installation standard, specs, data sheets & P&IDs. Smart HART, Ex'ia', IP-67 rated, 24 VDC 2-wire loop powered, RTD element with screwed head, 11/2" 600# thermowell of suitable insertion length. Inclusive of supply and installation of necessary accessories as per datasheets, standard specifications, standard installation drawings and P&ID attached with this tender.

Temperature Transmitter - Skin type as per Installation standard, specs, data sheets & P&IDs. Smart HART, Ex'ia', IP-67 rated, 24 VDC 2-wire loop powered, PT-100, RTD, 3-wire, duplex type elements, head certified with IP67, Ex'ia', 1/2" NPTF X 2nos. cable enteries, weldpad material & its dimensions API 5L GR.X-52 PSL2 / 50mm (L) x 25mm(W) x 25mm (Thick) - Rectangular with Radius to suit Pipe OD . Inclusive of supply and installation of necessary accessories as per datasheets, standard specifications, standard installation drawings and P&ID attached with this tender.

Supply, installation of Corrosion Probes (Strip type) and their accessories inclusive of supply of necessary 2" Access fittings including cabling, termination, glanding, dressing, mounting

Supply, installation of Corrosion Coupons (3" strip type) and their accessories inclusive of supply of necessary 2" Access fittings.

Supply, installation of Electrical Resistance Probes (Intrusive type) and their accessories inclusive of supply of necessary 2" Access fittings.

Termination & Testing of EHOV actuator of valve size 6" 300# as per site requirement Installation of Valve Actuators (EHOV), Valve Junction boxl and their accessories inclusive of supply of necessary piping/tubing along with necessary Tubing and tube fittings, including cabling, glanding, termination, earthing. Note: Installation of Valve with Actuator is considered part of Piping SOR.

Termination & Testing of Electrical actuator - Motor operated valve of size 6" 300# as per site requirement. Installation of Electrical actuator and their accessories inclusive of supply of necessary cable glands, terminals and complete with cabling, glanding, termination and earthing followed by testing and commissioning of complete Electrical actuator. Note: Installation of Valve with Actuator is considered part of Piping SOR.

Supply & Installation of Cables, Cables Trays and Junction boxes Supply, laying, installation, erection of signals cable from field instruments to junction boxes including termination, ferruling, dressing etc. Supply of cable trays, cables glands, junction boxes, erection materials, cable ferrules, cable lugs, cable tie. Installation and erection of cable trays and junction boxes.

1P X 1 .5 Sq. mm, Flame retardant,Over all Screened

1P X 1 .5 Sq. mm, Fire resistant,Over all Screened

6P X 1 .5 Sq. mm, Flame retardant,Individual Screened, Over all Screened

6P X 1 .5 Sq. mm, Flame retardant, Over all Screened

12P X 1 .5 Sq. mm, Flame retardant,Individual Screened, Over all Screened

1T X 2 .5 Sq. mm , Fire resistant,Over all Screened

6T X 2 .5 Sq. mm , Fire resistant,Over all Screened

6P X 1 .5 Sq. mm, Fire resistant,Over all Screened,Individual Screened, Over all Screened

Junction Box - Analog JB, IP-67, Ex'd'

Junction Box - Digital JB, IP-67, Ex'd'

Cable Trays (100 mm wide x 50 mm height), Perforated Type

Cable Trays (300 mm wide x 50 mm height), Perforated Type

INSTRUMENTATION WORKS NUMALIGARH

Supply, Calibration and Installation of instrumentation items listed below: (For details, refer instrumentation specifications)

Pressure Gauge of different Range and rating as per Installation standard, specs, data sheets & P&IDs. Bourdon type with 2-way manifold, direct mount, 150mm dial, wetted part SS316, IP 67 rated, blow out protection and shatter proof heavy duty glass. Inclusive of supply and installation of necessary accessories such as SS316 tubing and tube fittings and manifold hydraulic testing as per datasheets, standard specifications, standard installation drawings and P&ID attached with this tender.

Pressure Transmitter of different range and rating as per Installation standard, specs, data sheets & P&IDs. Smart HART, Ex'ia', IP-67 rated, 24 VDC 2-wire loop powered, direct mount with 2-way manifold. Inclusive of supply and installation of necessary accessories such as SS316 tubing and tube fittings and manifold hydraulic testing as per datasheets, standard specifications, standard installation drawings and P&ID attached with this tender.

Temperature Transmitter as per Installation standard, specs, data sheets & P&IDs. Smart HART, Ex'ia', IP-67 rated, 24 VDC 2-wire loop powered, RTD element with screwed head, 11/2" 600# thermowell of suitable insertion length. Inclusive of supply and installation of necessary accessories as per datasheets, standard specifications, standard installation drawings and P&ID attached with this tender.

Temperature Transmitter - Skin type as per Installation standard, specs, data sheets & P&IDs. Smart HART, Ex'ia', IP-67 rated, 24 VDC 2-wire loop powered, PT-100, RTD, 3-wire, duplex type elements, head certified with IP67, Ex'ia', 1/2" NPTF X 2nos. cable enteries, weldpad material & its dimensions API 5L GR.X-52 PSL2 / 50mm (L) x 25mm(W) x 25mm (Thick) - Rectangular with Radius to suit Pipe OD . Inclusive of supply and installation of necessary accessories as per datasheets, standard specifications, standard installation drawings and P&ID attached with this tender.

Supply, installation of Corrosion Probes (Strip type) and their accessories inclusive of supply of necessary 2" Access fittings including cabling, termination, glanding, dressing, mounting

Supply, installation of Corrosion Coupons (3" strip type) and their accessories inclusive of supply of necessary 2" Access fittings.

Supply, installation of Electrical Resistance Probes (Intrusive type) and their accessories inclusive of supply of necessary 2" Access fittings.

Termination & Testing of EHOV actuator of valve size 8" 300# as per site requirement Installation of Valve Actuators (EHOV), Valve Junction boxl and their accessories inclusive of supply of necessary piping/tubing along with necessary Tubing and tube fittings, including cabling, glanding, termination, earthing. Note: Installation of Valve with Actuator is considered part of Piping SOR.

Termination & Testing of Electrical actuator - Motor operated valve of size 8" 300# as per site requirement. Installation of Electrical actuator and their accessories inclusive of supply of necessary cable glands, terminals and complete with cabling, glanding, termination and earthing followed by testing and commissioning of complete Electrical actuator. Note: Installation of Valve with Actuator is considered part of Piping SOR.

Supply & Installation of Cables, Cables Trays and Junction boxes Supply, laying, installation, erection of signals cable from field instruments to junction boxes, junction box to terminal control room including termination, ferruling, dressing etc. Supply of cable trays, cables glands, junction boxes, erection materials, cable ferrules, cable lugs, cable tie. Installation and erection of cable trays and junction boxes.

1P X 1 .5 Sq. mm, Flame retardant,Over all Screened

1P X 1 .5 Sq. mm, Fire resistant,Over all Screened

6P X 1 .5 Sq. mm, Flame retardant,Individual Screened, Over all Screened

6P X 1 .5 Sq. mm, Flame retardant,Over all Screened

12P X 1 .5 Sq. mm, Flame retardant,Individual Screened, Over all Screened

1T X 2 .5 Sq. mm , Fire resistant,Over all Screened

6T X 2 .5 Sq. mm , Fire resistant,Over all Screened

6P X 1 .5 Sq. mm, Fire resistant,Over all Screened,Individual Screened, Over all Screened

Junction Box - Analog JB, IP-67, Ex'd'

Junction Box - Digital JB, IP-67, Ex'd'

Cable Trays (100 mm wide x 50 mm height), Perforated Type

Cable Trays (300 mm wide x 50 mm height), Perforated Type

Supply of Pneumatic Actuated control valve of max size 8" 300# with Smart Positioner and their accessories, inclusive of supply of necessary tubing , tube fittings as per datasheets, P&ID and standard specifications to Client office/ Warehouse in Golaghat.

OVAL PROJECTS ENGINEERING PRIVATE LIMITED

R S CONSTRUCTION

PUNJAB ENGINEERING COMPANY (PROJECT DIVISION)

Techno Global Services Pvt Ltd