8353 REPAIRS AND MAINT OF DRAINAGE CULVERT ETC IN OTM AND MD ACCN AT AFMC UNDER GE (CENTRAL) PUNE

Amount

Demolition of Cement Concrete (Unreinforced) of any description and in any position not otherwise specifically provided for etc and rubbish off the premises complete all as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 150mm bore dia complete all as specified and as directed. .

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 200mm bore dia complete.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 300mm bore dia complete.

Demolition of cement concrete bed in haunching and breaking up RCC drain pipes set in cement mortar of 600 mm bore dia complete.

Excavation in trenches not exc 1.5 Mtr deep and not exc 1.5 Mtr wide in manholes, etc. and getting out in any type of Soil all as specified and as directed. .

M & L for plain cement concrete 1:4:8 Type D2 using 40mm graded stone aggregateas as in foundation, filling and mass concrete for manholes & drains complete all as specified and as directed..

M & L for plain cement concrete 1:3:6 Type C2 using 40mm graded stone aggregateas as in foundation, filling and mass concrete for manholes & drains complete all as specified and as directed.

M & L for plain cement concrete 1:2:4 Type B1 using 20mm graded stone aggregate as in benching and surface channel / drain etc complete all as specified and as directed .

M & L for plain cement concrete 1:3:6 Type C1 using 20mm graded aggregate as in coping including use and waste of necessary form work complete all as specified and as directed.

Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete. all as specified and as directed.

M & L for Precast cement concrete block masonry exc 10cm in width with solid blocks, 1:5:10 grade D-5 and set in cement mortar 1:6 complete all as specified & directed.

M & L for Walling of random rubble masonry , uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete.

M&L for Walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 but exept stone Complete..

M & L Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including , forms mould, mitred / stopped ends etc complete..

M & L Extra for forming fair finished drain or channel 45cm inner girth in cement concrete using extra cement inclliding, forms mould, mitred / stopped ends etc complete..

M&L Extra for forming fair finished drain or channel 60cm inner girth in cement concrete using extra cement including , forms mould, mitred / stopped ends etc complete..

M &L for rendering 15mm thick in CM 1:4 on stone masonary sufaces finished the surface even and smooth using extra cement including taking down old cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water all as specified and as directed. .

M & L Rendering 15mm thick on fair faces of brick work of brick or concrete surfaces in CM 1:4 finished the surface even and Smooth without extra cement all as specified and as directed. .

M & L Cement Concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore dia pipe all as specified and as directed. .

M & L Cement Concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore dia pipe all as specified and as directed. .

M &L Cement Concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 300mm bore dia pipe all as specified and as directed. .

M & L 150mm bore dia reinforced concrete drain pipes class NP-3 confirming to IS laid in trenches and jointed in CM 1:2 all as specified and as directed.

M & L 200mm bore dia reinforced concrete drain pipes class NP-3 confirming to IS laid in trenches and jointed in CM 1:2 all as specified and as directed.

M & L 300mm bore dia reinforced concrete drain pipes class NP-3 confirming to IS laid in trenches and jointed in CM 1:2 all as specified and as directed.

M & L 600mm bore dia reinforced concrete drain pipes class NP-3 confirming to IS laid in trenches and jointed in CM 1:2 all as specified and as directed.

Returning , filling in soil including spreading, levelling and well ramming in layers not exc 25cm thick complete all as directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as directed.

Dismantling of fencing wire mesh any type any description all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Dismantling posts or struts (Wood, Steel or RCC) of any section embedded in concrete, brick work etc. including taking out embedded portion and making good disturbed surface of grounf ground complete all as directed..

S & F Mild Steel Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 all as specified and as directed.

Supply & Fixing 4mm dia GI chain link fencing of mesh size 100mm x 100mm including provision of M S binding wire etc complete all as specified and as directed.

Supply only 10mm dia M S line wires complete all as specified and as directed.

S & F Mild steel screw bolts 5 to 10mm dia (machine made) with hexagonal or square head at one end and screwed both ends , each screwd end to be fitted with washers and one hexagonal or square nut not exc 5cm long complete all as specified and as directed.

S & F M S Framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290.Gde-E-165 all as specified and as directed.

S & F M S framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and decorative cast iron artical etc onforming to Fe 290.Gde-E-165 all as specified and as directed.

S & F 1.25mm thick, Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified and as directed.

S & F 2.00mm thick, Fibre glass reinforced translucent corrugated sheet with two corrugations side lap fixed with coach screw and washer in roof, wall etc all as specified and as directed..

S & F galvanised steel , 2 strand, barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with including provision of galvanised mild steel wire, staples or steel pins etc. including dismantlling old barbed wire fencing all as specified and as directed.. (Note : - Each line of wire to be measured separtely)

M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide or zink chrome primer all as specified.

Demolition for precast concrete articles all as directed.

M & L 35mm thick precast cement concrete louvres and jallies, 1:2:4, type B-0, using 12.5mm graded stone aggregates set in CM 1:4 (measured solid), including all mouldings but excluding frame all as specified and as directed..(Note :- Precast frame shall be measured and paid separatly)

M & L precast cement concrete columns, posts, boundary pillars, 1:2:4, type B-1, using 20mm graded stone aggregate with fair faces, including chamfers weatherings, throating etc and set in cement mortar complete with joints to match all as specified and as directed

M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified.

Dismantling of floors health or walls tiling including cement mortar bedded (but not backing) & rubbish off the premises out side of MD land all as directed.

M & L 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub bases, complete all as specified and as directed.

M & L for rubber moulded precast coloured, chequered cement concrete tiles, glossy finish of size 200 x 200 x 25mm thick, conforming to IS-1237 (2006) set , jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Dismantaling Stone slabs and tiles laid, bedded and pointed in cement mortor of any description or thickness in floors, aprons etc all as directed..

M & L 20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms, window cills, jambs, wall cladding and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite complete and ensure best adhesion to surface complete all as specified.

Rounding to edges of stone slabs one edge such as in steps, cooking platform, and other similar situations all as directed.

Dismantaling Stone slabs and tiles laid dry or laid dry and pointed, bedded and pointed in cement mortor of any description or thickness in floors, aprons etc all as directed..

M & L 60mm thick machine pressed concrete interlocking paver block of any shape and size in cement concrete M-35 grade conforming to IS 15658-2006, chamfered edge with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed..

M & L factory made kerb stone in M-25 grade cement concrete fixed in position to the required line, level and curvature, jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed..

M & L for Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc section of fillete exc 25 Sqcm but not exc 50 Sqcm all as directed.

M & L precast cement concrete 1:2:4 , type B-1 using 20mm graded stone aggregate as in cover slabs (for man holes / drains etc.) set in CM 1:6 complete all as specified and as directed..

M & L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

Taking up or down existing drain covers slab of any size and description and cleaning of choked storm water drains of any bore or pipe any size by manual roding or by mechanical means and well flushing with water, taking out waste materials of any quantity and depositing where as directed including covering the same with at least 30cm thick layer of soil and refixing the cover slab in same position with cement motar complete all as directed.

Taking up or down drain cover slabs of any description and cleaning of storm water drains width not exc 45 cm and depth not exc 60cm by maual roding or by mechanical means and well flushing with water, taking out waste materials of any quantity and depositing where as directed including covering the same with at least 30cm thick layer of soil and refixing the cover slabs in same position with cement mortor complete all as directed..

M/s Omkar Associates

Parhar Enterprise

PRASHANT CONSTRUCTION

J P ASSOCIATES

REKHA ELECTRICALS

Takshashila electricals

Galaxy Construction

BAGESHWARY CONSTRUCTION

Mukund Engineers and Contractors