Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹13.3 L
EMD Value
₹28,000
Closing Date
3 Nov 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
SE, MDA
SE, MDA
09 - Muzaffarnagar sahar mai gram sandhawali mai pani ki tanki k pass 01 nag 16 meeter hig mast light ram makhiyali mai sthit shiv mandir junior high shool k pass 01 nag 12.5 meter cm highmast light gram sandhawali mai ucch prathic vidhaliya ke pass
2026_UPMDA_1196632_9
5087/MDA/CD/2026-27, Dt. 13-10-2026
Open Tender
Miscellaneous Works
Percentage
60 days
Muzaffarnagar
Tender Fee, EMD and other Documents as per the tender documents/NIT
2 documents required · 2 mandatory
₹2,360
VC, Muzaffarnagar Development Authority
₹28,000
16 Oct 2026
16 Oct 2026
4 Nov 2026
16 Oct 2026
3 Nov 2026
16 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | xzke la/kkoyh esa mPp izkFkfed fo|ky; ds ikl 01 ux] 12-5 eh0 lseh gkbZekLV ykbZV dk dk;ZA | - | - | - | - |
| - | Supply & fixing of 12.50 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site requirement along with foundation bolts nuts, washers, anchor plates etc complete in all respect as per direction of E/I. etc (S.I No. 651/2018) | 1 | Nos | 1,97,600 | ₹1,97,600 |
| - | Supply and laying of aluminium insulated armoured served sheathed cables 1100 Volts conductor PVC grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size. The armouring of the cable shall be properly connected with the earth conductor by clamps etc complete in all respect as per direction of E/I etc (S.I No 501 (H)/2018 10 sq. Mm 4 core) | 40 | Rmt | 310.65 | ₹12,426 |
| - | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect as per direction of E/I etc. (Which are registered and approved at least by PWD) (S.I No 1454/2018 CAT-AAA) | 5 | Nos | 12,530.5 | ₹62,652.5 |
| - | Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all each respect. S.I No- 703/2018 | 1 | Nos | 5,111 | ₹5,111 |
| - | Supply and fixing of 63 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect. (S.I. No 327/2018 Elec) | 1 | Nos | 4,113.5 | ₹4,113.5 |
| - | Supply and fixing of single unit LED aviation Obstruction light complete with transformer and LED spiral etc complete in all respect. (S.I No-409/2018) | 1 | Nos | 3,747.75 | ₹3,747.75 |
| - | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. Complete in all respect as per direction of the Engineer-in-Charge (S.I No. 504 C/2018) | 25 | Nos | 19 | ₹475 |
| - | S/L of following size DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excuding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm &ID-51 mm nominal) DSR S.N14.16.1/2022 | 25 | Rmt | 89.06 | ₹2,226.5 |
| 2 | xzke&la/kkoyh esa ikuh dh Vadh ds ikl 01 ux] 16 eh0 gkbZekLV ykbZV dk dk;ZA | - | - | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.50 MB
TD_5087_09.pdf
Additional Documents • 0.48 MB
BOQ_2263609.xls
BOQ • 0.33 MB
TD_5087.pdf
Tender Documents • 1.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .