Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.3 LAccepted-AOC MALERKOTLA DIST SANGRUR | 1 | Accepted-AOC L1 |
Tender Value
₹15.3 L
EMD Value
₹30,700
Closing Date
31 Dec 2020, 5:00 pmClosed
Executive Engineer
Water Supply and Sanitation Division Malerkotla
PROVIDING and INSTALLING CONTROL PANEL REPAIR OF PUMP CHAMBER OHSR and WATER WORKS PandF DISINFECTION UNIT AUTOMATIC WATER CONTROLLER NEW WATER CONNECTION PAINTING OF SIGN BOARD ETC
2020_WB_58036_1
105/WSSD-MALERKOTLA/EE/2020-21
Open Tender
Civil Works
Item Rate
120 days
Malerkotla
Please refer Tender documents.
4 documents required · 4 mandatory
₹1
₹30,700
23 Jan 2021
23 Dec 2020
1 Jan 2021
23 Dec 2020
31 Dec 2020
23 Dec 2020
Amount
Component -1
Providing & Fixing Electric Panel Board (ISI marked) Consisting of electric appliances such as Automatic star Delta Push Button with oil immersed starter, Main switch, VM ampere Meter, E LCB, shunt capacitor, single phase Preconter, including lamps, Kit-kat etc. Complete in all respect.
Repair of Pump Chamber
White washing scraping inside of Pump Chamber.
Scraping of snowcem robbiacem etc.
White washing 2 coat inside of Pump Chamber.
Finsing Wall with exiterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade.
Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint
Scraping of plastering of Pump Chamber.
Plastering 1:4, 12.5mm thick on Pump Chamber.
Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. Qty. as per item No. 5
Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber.
Distempering with dry distemper of approved manufacture one coat on old distempered work.
Repair of plaster of tile terracing.
Providing and fixing of electric tube set of reputed make
Repair of electric fitting complete in all respects.
Repair of door & windows complete in all respects.
Repair of OHSR
Repair of Expansion Joint Size 200 mm i/d complete in all respects.
Repair of Expansion Joint Size 150 mm i/d complete in all respects.
P/F OHSR Jali complete in all respects.
Repair of tank wall including scraping & plastering complete in all respects.
Painting of OHSR pipes including cost of labour & material complete in all respects.
Painting of OHSR stair case railing and pickets including cost of labour & material complete in all respects.
Repair of leakage in C.I. rising main 200mm i/d complete in all respects.
Repair of Water Works
Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects.
Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).
Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7.
Repair of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3 & Analysis A-5.
Cement concrete 1:8:16 with 40 mm gauge stone aggregate to be used instead of brick ballast for footpath.
Conglomerate floor 40mm cement concrete topping 1:2:4 for footpath.
Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification.
Automated water controller switch to start or stop the pump based on water reservoir level.
Improvement in existing connections
Repair of old house connections complete in all respects.
Repair and minor Replacement of existing pipe line
Provision for making new connection with exit pipe line as per analysis A-20 complete in all respects.
Hand boring Horizontally for crossing of pipe under road or any other obstacle by using Auger/Bocki method. Including excavation, stringing and jointing of pipe upto 160 mm complete.
Component -2
Providing proposed water connection on existing pipe line to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.
Component -3
Providing, Laying, fixing & jointing of PVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including excavation & back filling complete as per specifications for more than 3 mtr street width.
PVC pipe 63mm o/d 6Kg/sqcm
Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.
PVC pipe 63 mm o/d
Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects as per analysis A-25
PVC pipe 63 mm o/d
Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.
Painting on Board both sides including priming coat , printing & Map as per Water Supply & Sanitaton standard
Cost of Component-4 (Operation and maintenance)
Provision for sodium chloride for disinfection of water complete in all respects.
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .