Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹96.3 L
EMD Value
₹1.9 L
Closing Date
12 Nov 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TECHNICAL
16 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Note: In case, date of tender inviting is on or after date of statutory deadline for audit of balance sheet of previous FY (i.e. 30th Sept or as further extended for this FY), audited balance sheet of 4th previous year shall not be considered unless concerned CA certifies that balance sheet is not audited yet as on date of invitation of this tender.
The contractor should have valid Electrical Contractor License issued by Govt. and submit along with tender document. If valid Electrical Contractor License is not submitted along with tender document, then offer will be summarily rejected.
16 conditions · 3 needing a document upload
The tenderer shall submit all relevant documents as detailed in para 14 & 18.10 of Tender Form (Second Sheet) of Part I of GCC work-2022.
The tenderer shall submit copy regarding status of firm i.e. sole proprietorship, partnership, Company, Society/Trust etc. and also submit a power of attorney and other relevant documents as detailed in Para no. 15 of Tender Form (Second Sheet) of PartI of attached GCC-2022.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. Following documents shall be submitted by the tenderer:
a) Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022.
(b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC2022.
(c) Partnership Firm: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022.
(e) Company registered under Companies Act 2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) of GCC-2022.
(f) LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm / LLP or JV in which they were / are partners / members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022.
(g) Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he / they be partner(s) of the firm or any other person, specifically authorizing him / them to sign the tender, submit the tender and further to deal with the Tender / Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association / Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he / they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Apostille certificate.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Contractor should quote only the above/below percentage on estimated value, in the space provided at web portal for the purpose & nowhere else. Financial & Technical conditions quoted at any place other than prescribed space shall not be entertained while evaluating the offer.
Tenderer are required to go through the documents attached along with the tender and submit their bids accordingly.
Electrical work in c/w Augmentation of facilities at Lahli Goods shed, Augmentation of passenger amenities at Bhiwani City station and additional room & toilets for running staff at Running room at Hisar over Bikaner division.
19-El-BKN-E-Tender-26-27~NWR
19-El-BKN-E-Tender-26-27
Open
Works - General
9 Months
Bikaner, Rajasthan
₹0
₹1.9 L
17 Oct 2026
17 Oct 2026
29 Oct 2026
147 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 96,31,040 | ||
| — | 270.00 | — | — | ||
| Supply of material and wiring of LP/TP/FP/Ex. Fan point with 1.5sqmm PVC single core multi-stranded copper wire insulated concealed in stone/brick masonry wall in 19/20 mm PVC conduit with 1.5sqmm PVC wire insulated copper for earth wire 1-way / 2-way switch 5/6A as required and good quality ceiling rose, holder including connection. This item includes modular switch, modular ceiling rose, holder, PVC conduit and required chase as per site requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 99,630 | |
| — | 110.00 | — | — | ||
| Supply and fixing 5/6A socket, modular 3-pin 230V including modular switch in the modular board and connection as per site requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 26,290 | |
| — | 55.00 | — | — | ||
| Supply and fixing 15/16A socket, modular 6-pin 230V including modular switch in the modular board and connection as per site requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 14,795 | |
| — | 60.00 | — | — | ||
| Supply and fixing 2 module modular switch board plate for fixing of modular switches - socket with sheet metal box of good quality concealed fixing of MS/PVC as per site requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 6,720 | |
| — | 110.00 | — | — | ||
| Supply and fixing 4 module modular switch board plate for fixing of modular switches - socket with sheet metal box of good quality concealed fixing of MS /PVC as per site requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 18,370 | |
| — | 52.00 | — | — | ||
| Supply and fixing 6 module modular switch board plate for fixing of modular switches -plug with sheet metal box of good quality concealed fixing of MS/PVC as per site requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 10,816 | |
| — | 65.00 | — | — | ||
| Supply and fixing 8 module modular switch board plate for fixing of modular switches - socket with sheet metal box of good quality concealed fixing of MS /PVC as per site requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 18,005 | |
| — | 50.00 | — | — | ||
| Supply and fixing 12 module modular switch board plate for fixing of modular switches - socket with sheet metal box of good quality concealed fixing of MS /PVC as per site requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 15,300 | |
| — | 3300.00 | — | — | ||
| Wiring of sub-main with 2x2.5 sqmm PVC insulated, single core, multi-stranded copper wire in PVC conduit concealed and 2.5sqmm PVC insulated, single core, multi-stranded copper wire for earth wire as per spec. This item includes wire, PVC conduit (25 MM) and chase as per requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 2,21,100 | |
| — | 2900.00 | — | — | ||
| Wiring of sub-main with 2x4 sqmm PVC insulated, single core, multi-stranded copper wire in PVC conduit concealed and 4.0 sqmm PVC insulated, single core, multi-stranded copper wire for earth wire as per spec. This item includes wire, PVC conduit (25 MM) and chase as per requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 3,33,500 | |
| — | 1900.00 | — | — | ||
| Wiring of sub-main with 2x6 sqmm PVC insulated, single core, multi-stranded copper wire in PVC conduit concealed and 6.0 sqmm PVC insulated, single core, multi-stranded copper wire for earth wire as per spec. This item includes wire, PVC conduit (25 MM) and chase as per requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 2,37,500 | |
| — | 510.00 | — | — | ||
| Fixing of LED tube light complete. (Fitting will be supplied by Railway). Inspection: Consignee, Inspection charges: None. | — | — | — | 15,300 | |
| — | 116.00 | — | — | ||
| Fixing & commissioning of ceiling fan with nut bolt ensuring all safety aspects. Contractor is responsible for falling of fan within a period of 12 month. (Fan will be supplied by Railway.) Inspection: Consignee, Inspection charges: None. | — | — | — | 2,784 | |
| — | 116.00 | — | — | ||
| Supply and fixing ceiling of modular (2 module) fan regulator electronic type 5-step (suitable for BLDC fan) as per specification. Inspection: Consignee, Inspection charges: None. | — | — | — | 44,080 | |
| — | 29.00 | — | — | ||
| Supply, fixing, testing and commissioning of single phase, 230-volt, 50 Hz operating ventilation fan of 300 mm. sweep with louver shutters. Fan should be of reputed make and as per tech. spec. Inspection: Consignee, Inspection charges: None. | — | — | — | 58,725 | |
| — | 150.00 | — | — | ||
| Supply and fixing of LED down light fitting complete with luminaire. (Note: The unit is taken PER UNIT which means WATT). Inspection: Consignee, Inspection charges: None. | — | — | — | 9,150 | |
| — | 59.00 | — | — | ||
| Supply, installing, testing and commissioning earth electrode complete in all respect with perforated GI pipe medium "B" class (Blue) confirming to IS 1239 part-I length of 4 mtr., bore 50mm with all accessories like nut bolt, reducer nipple, wire meshed funnel and CC finished chamber covered by CI/RCC frame etc. Digging pit and refilling it with charcoal and salt in successive layers and connection with Strip and as per IS:3043, drawing attached as Annexure-I & testing of earth resistance as reqd. Inspection: Consignee, Inspection charges: None. | — | — | — | 1,12,041 | |
| — | 15.00 | — | — | ||
| Supply of unit maintenance free earth material as per RDSO Specs. No RDSO/PE/SPEC/PS/0/0109 (REV.0) 2008 or Latest. Inspection: Consignee, Inspection charges: None. | — | — | — | 1,34,715 | |
| — | 15.00 | — | — | ||
| Installation of unit maintenance free earth as per RDSO Specs. No RDSO/PE/SPEC/PS/0/0109 (REV.0) 2008 or Latest. Inspection: Consignee, Inspection charges: None. | — | — | — | 56,745 | |
| — | 21.00 | — | — | ||
| Supply and fixing of junction box size 390/388x305/304x170mm comprising of SMP/FRP material with rubber gasket, padlock arrangement, zinc passivated earth bolt, etc. Make Sintex or similar with 4 no. aluminum busbar cap 200 Amp., suitable for 415 volt supply requirement. The box shall be fixed robustly with clamps at pole/ wall as per requirement. All the material should be of good quality. Inspection: Consignee, Inspection charges: None. | — | — | — | 41,916 | |
| — | 4.00 | — | — | ||
| Supply and fixing of TPN MCCB double door DB 12+2 way with 4P 100A (25 kA) MCCB-1 no., 2P 63A, 100 mA RCCB-3 no. and 2P 25A 'C' series 10 kA MCB-18 nos. MCCB, MCB, RCCB and DB should be as per tech spec. and of same make. Inspection: Consignee, Inspection charges: None. | — | — | — | 1,04,416 | |
| — | 7.00 | — | — | ||
| Supply, installation, testing and commissioning of SPN DB 12 Way with suitable IP protection having 1 No. RCBO 40 Amp Cap., sensitivity 30 mA in the incoming and in outgoing 06 Nos. 10-32 Amp. SP MCB, 10 kA, 'C' curve, 10KA as required with bus bar, neutral bar and necessary wire sets. As per specification. MCB, RCBO and DB should be as per tech spec. and of same make. Inspection: Consignee, Inspection charges: None. | — | — | — | 46,599 | |
| — | 34.00 | — | — | ||
| Supply and fixing of Modular mini MCB SP 25/ 32Amp, C series. Breaking capacity not less than 10 KA of reputed make. Inspection: Consignee, Inspection charges: None. | — | — | — | 8,330 | |
| — | 20.00 | — | — | ||
| Supplying, fixing and commissioning of street light fitting accessories e.g. GI pipe of suitable bore as per fitting, clamps, nuts, bolts, cable etc as per instruction of site engineer. Inspection: Consignee, Inspection charges: None. | — | — | — | 2,640 | |
| — | 45.00 | — | — | ||
| Supply & erection of 5 m high with double arm model no. BOP-5030 of Bajaj or similar, pole shaft material S355J0 or equivalent as per IS, hot dip galvanized steel octagonal pole with galvanized base plate of 200x200x12 mm, junction box with 6 Amp. MCB and stud terminals (for mounting inside the base compartment of pole), foundation bolt size 4x16mm dia. 600 mm in length including excavation and making foundation as per spec. and drawing. It shall be galvanized internally and externally by single dipping method. The pole and foundation shall be made as per specification and drawing attached as Annexure-II. Inspection: Consignee, Inspection charges: None. | — | — | — | 3,65,130 | |
| — | 104.00 | — | — | ||
| Fixing of Street light complete. (Fitting will be supplied by Railway). Inspection: Consignee, Inspection charges: None. | — | — | — | 11,544 | |
| — | 3.00 | — | — | ||
| Design, manufacturing, supply, testing, erection and commissioning of LT panel made by 2 mm CRCA sheet with 1 no. Incomer 250A MCCB and Outgoing - 2 no. 4 pole MCCB 125 amps., 2 nos. 4 pole MCCB 63 amps. and 2 nos. 4 pole MCCB 40 amps. with meter & indication LED, copper bus bar etc. as per spec. with foundation. Inspection: Consignee, Inspection charges: None. | — | — | — | 3,50,316 | |
| — | 3000.00 | — | — | ||
| Supply of 4 x 16 sq. mm, 1.1KV grade, LT XLPE insulated PVC outer sheathed aluminium conductor armoured cable confirming IS: 7098 (Part-1) and as per tech spec. of reputed make Polycab/ Finolex/KEI /Havells/ RR Kabel /Universal/ V-Guard/ Anchor/ RPG/CCI or similar. Inspection: Consignee, Inspection charges: None. | — | — | — | 3,84,000 | |
| — | 3000.00 | — | — | ||
| Laying, connecting, testing and commissioning of 4x16 sqmm, 1.1KV grade, LT PVC insulated PVC outer sheathed aluminium conductor armoured cable in trench/pipe as per spec (Cable will be supplied by railway). Inspection: Consignee, Inspection charges: None. | — | — | — | 24,000 | |
| — | 500.00 | — | — | ||
| Supply of 4 x 50 sq. mm, 1.1KV grade, LT XLPE insulated PVC outer sheathed aluminium conductor armoured cable confirming IS: 7098 (Part-1) and as per tech spec. of reputed make Polycab/ Finolex/KEI /Havells/ RR Kabel /Universal/ V-Guard/ Anchor/ RPG/CCI or similar. Inspection: Consignee, Inspection charges: None. | — | — | — | 1,17,000 | |
| — | 500.00 | — | — | ||
| Laying, connecting, testing and commissioning of 4x50 sqmm, 1.1KV grade, LT PVC insulated PVC outer sheathed aluminium conductor armoured cable in trench/pipe as per spec (Cable will be supplied by railway). Inspection: Consignee, Inspection charges: None. | — | — | — | 4,000 | |
| — | 1000.00 | — | — | ||
| Supply of 4 x 120 sq. mm, 1.1KV grade, LT XLPE insulated PVC outer sheathed aluminium conductor armoured cable confirming IS: 7098 (Part-1) and as per tech spec. of reputed make Polycab/ Finolex/KEI /Havells/ RR Kabel /Universal/ V-Guard/ Anchor/ RPG/CCI or similar. Inspection: RITES, Inspection charges: Borne by Railways. | — | — | — | 5,41,000 | |
| — | 1000.00 | — | — | ||
| Laying, connecting, testing and commissioning of 4x120 sqmm, 1.1KV grade, LT PVC insulated PVC outer sheathed aluminium conductor armoured cable in trench/pipe as per spec (Cable will be supplied by railway). Inspection: Consignee, Inspection charges: None. | — | — | — | 20,000 | |
| — | 7000.00 | — | — | ||
| Supply of HDPE pipe conforming to IS 4984:2016, 50 mm dia, wall thickness 3 mm, PN 6 under the road. Inspection: Consignee, Inspection charges: None. | — | — | — | 4,41,000 | |
| — | 7000.00 | — | — | ||
| Laying of HDPE pipe conforming to IS 4984:2016, 50 mm dia, wall thickness 3 mm, under the ground/road. The work involves laying of HDPE pipe along with transportation. Inspection: Consignee, Inspection charges: None. | — | — | — | 56,000 | |
| — | 4900.00 | — | — | ||
| Supply of HDPE pipe conforming to IS 4984:2016, 75/80 mm dia, PN 6, PE 80 as per requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 4,26,300 | |
| — | 4900.00 | — | — | ||
| Laying of HDPE pipe conforming to IS 4984:2016, 75/80 mm dia, under the ground/road. The work involves laying of HDPE pipe along with transportation. Inspection: Consignee, Inspection charges: None. | — | — | — | 58,800 | |
| — | 11400.00 | — | — | ||
| Digging and filling of trench size 0.4 x 0.8 mtr as per spec. (trench work may be on kuchha/pucca land and all type of soil as per site requirement and without protective layer of brick) Surface of trench shall be made good in all respect and satisfaction of site engineer. Inspection: Consignee, Inspection charges: None. | — | — | — | 4,21,800 | |
| — | 20.00 | — | — | ||
| Supply, laying and fixing of GI pipe medium "B" class (Blue) confirming to IS 1239 part-I for passing incoming and outgoing cable from ground through it size 38 mm dia. Pipe should be of reputed make and as per tech. spec. Inspection: Consignee, Inspection charges: None. | — | — | — | 2,620 | |
| — | 10.00 | — | — | ||
| Supply, laying and fixing of GI pipe medium "B" class (Blue) confirming to IS 1239 part-I for passing incoming and outgoing cable from ground through it size 50 mm dia. Pipe should be of reputed make and as per tech. spec. Inspection: Consignee, Inspection charges: None. | — | — | — | 1,920 | |
| — | 100.00 | — | — | ||
| Laying of Spun/MS/GI/HDPE pipe 100mm to 200 mm by push through method in Railway yard/below track/Road. Inspection: Consignee, Inspection charges: None. | — | — | — | 44,300 | |
| — | 400.00 | — | — | ||
| Laying of Spun/MS/GI/HDPE pipe 100mm to 200 mm by drilling of Horizontal bore by machine in Railway yard/below track/Road. Inspection: Consignee, Inspection charges: None. | — | — | — | 4,42,400 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing and commissioning of RCBO 25A, double pole, four module, 30mA with Earth leakage, overload and short circuit protection as per spec. Inspection: Consignee, Inspection charges: None. | — | — | — | 47,580 | |
| — | 20.00 | — | — | ||
| Supply and fixing of 4 module metal enclosure for fixing of RCBO as per IEC 61439-3, Suitable for flush mounting and surface mounting with door for IP 54, similar to Legrand model no. 507793 of reputed make. Inspection: Consignee, Inspection charges: None. | — | — | — | 12,320 | |
| — | 4.00 | — | — | ||
| Transportation, commissioning and installation of water cooler with foundation as per specification. Water cooler will be given by Railways. Inspection: Consignee, Inspection charges: None. | — | — | — | 22,072 | |
| — | 300.00 | — | — | ||
| Supply of materials & laying of perforated GI cable Tray cable Tray Size 100 mm X 50mm with cover and fixing arrangement as per site requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 1,14,300 | |
| — | 700.00 | — | — | ||
| Supply of material and laying of perforated GI cable tray of size 300mm X 50 mm with cover and all fixing arrangements as per specification and as per site requirement. Inspection: RITES, Inspection charges: Borne by Railways. | — | — | — | 8,05,700 | |
| — | 50.00 | — | — | ||
| Design, manufacture, display of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. As per tender specs. Inspection: Consignee, Inspection charges: None. | — | — | — | 1,06,950 | |
| — | 50.00 | — | — | ||
| Erection and installation of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. As per tender specs. Inspection: Consignee, Inspection charges: None. | — | — | — | 10,700 | |
| — | 10.00 | — | — | ||
| Supply of phenolic top mobile charging wooden board size 6"x15" fitted with 4 nos. switch & 4 nos. socket of 6 amps with internal wiring of1.5 sqmm with base plate of both side particle board for mobile with hanging clip as per specification. Inspection: Consignee, Inspection charges: None. | — | — | — | 3,980 | |
| — | 230.00 | — | — | ||
| Supply & wiring of light/fan point in covered shed with 1.5sq.mm multistrand copper, PVC insulated, single core wire in PVC 19/20 mm ISI PVC conduit pipe mounted on structure/ shed with ceiling rose 5 Amp. mounted on wooden block/PVC junction box. (As per spec). Inspection: Consignee, Inspection charges: None. | — | — | — | 42,780 | |
| — | 7.00 | — | — | ||
| Supply & testing of Submersible pump set suitable for bore 150mm, discharge 240 LPM. 106 Mtr Head, 10 Hp, BEE approved 3 Star rated or above, Make: KSB / Duke / CRI / Sabar / CG/ Kirloskar. Inspection: Consignee, Inspection charges: None. | — | — | — | 2,98,480 | |
| — | 5.00 | — | — | ||
| Supply, commissioning & testing of Monoblock Submersible pump set 10 HP, discharge 850 LPM. 35 Mtr Head, BEE approved 3 Star rated or above rated of reputed make KSB / Duke / CRI / Sabar / CG/ Kirloskar. Inspection: Consignee, Inspection charges: None. | — | — | — | 2,16,810 | |
| — | 3.00 | — | — | ||
| Supplying, fixing, testing & commissioning of digital soft starters model no. CSXi of L&T or similar for 15 kW motor complete with powder coated - grey shade sheet metal enclosure of 1.6mm thick sheet, neoprene EDPM/Rubber gasket, with start stop push button, 4 no. aluminum bus- bar, ammeter & 4 pole MCCB 50 A with adjustable thermal setting and min. 25 kA breaking capacity. Starter and MCCB should be of reputed make and as per tech. spec. Inspection: Consignee, Inspection charges: None. | — | — | — | 1,36,854 | |
| — | 2.00 | — | — | ||
| Supplying, fixing, testing & commissioning of digital soft starters model no. CSXi of L&T or similar for 18 kW motor complete with powder coated - grey shade sheet metal enclosure of 1.6mm thick sheet, neoprene EDPM/Rubber gasket, with start stop push button, 4 no. aluminum bus- bar, ammeter & 4 pole MCCB 50 A with adjustable thermal setting and min. 25 kA breaking capacity. Starter and MCCB should be of reputed make and as per tech. spec. Inspection: Consignee, Inspection charges: None. | — | — | — | 93,206 | |
| — | 1000.00 | — | — | ||
| Supply and drawing of PVC insulated 3 core sheathed Flat copper submersible cable 1100 volt grade conf. to IS: 694/1990 with latest amendments, size 10 sqmm. Cable should be of reputed make and as per tech. spec. Inspection: Consignee, Inspection charges: None. | — | — | — | 3,73,000 | |
| — | 800.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of station name in 3D letters as in a frame in Hindi and English matter (unit each means Height inches) Inspection: Consignee, Inspection charges: None. | — | — | — | 1,48,000 | |
| — | 1000.00 | — | — | ||
| Supply of 2x70 sq. mm, 1.1KV grade, LT XLPE insulated PVC outer sheathed aluminium conductor armoured cable confirming IS: 7098(Part-1) and as per tech spec. of reputed make Polycab/ Finolex/KEI /Havells/ RR Kabel /Universal/ V-Guard/ Anchor/ RPG/CCI or similar. Inspection: Consignee, Inspection charges: None. | — | — | — | 2,33,000 | |
| — | 1000.00 | — | — | ||
| Laying, connecting, testing and commissioning of 2x70 sqmm, 1.1KV grade, LT PVC insulated PVC outer sheathed aluminium conductor armoured cable in trench/pipe as per spec ( pipe will be supplied by railway free of cost). Inspection: Consignee, Inspection charges: None. | — | — | — | 17,000 | |
| — | 50.00 | — | — | ||
| Supply and providing of cable marker- The cable marker shall be made of MS sheet 1.5 mm thick size 150 x 100 mm welded with 12 mm dia MS rod 85 cm long. The lower end of rod should be turned in MS hook shape and attached with the cable at the time of laying. Inspection: Consignee, Inspection charges: None. | — | — | — | 8,100 | |
| — | 14.00 | — | — | ||
| Fixing and commissioning of split AC 1.5 ton as per site requirement with all accessories. Inspection: Consignee, Inspection charges: None. | — | — | — | 28,434 | |
| — | 5.00 | — | — | ||
| Supply, fixing, testing and commissioning of single phase, 230 volt 50 Hz wall mounting/bracket fan of sweep 400 mm. Fan should be of reputed make. Inspection: Consignee, Inspection charges: None. | — | — | — | 5,700 | |
| — | 1.00 | — | — | ||
| Preparing / Supply of drawing in Auto CAD (Original + 2 copies) Jet Mat paper of 85/90 GSM showing proper wiring diagram of all electrical installations inside a quarter and power supply arrangement for the above quarters in colony as per site requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 3,556 | |
| — | 16.00 | — | — | ||
| Supply & fixing of flexible stand type 09 to 12 watt LED reading bed side light having adjustable movement for reading in a finished used on/off switch complete with LED lamp as per spec. Inspection: Consignee, Inspection charges: None. | — | — | — | 8,208 | |
| — | 8.00 | — | — | ||
| Supply and fixing of two-way switch of 10 Amp. 230V-240V of reputed make. Inspection: Consignee, Inspection charges: None. | — | — | — | 616 | |
| — | 16.00 | — | — | ||
| Supply and fixing of LED Foot light fitting complete with driver model no. BGST 0101 WW of Bajaj or similar of reputed make. Inspection: Consignee, Inspection charges: None. | — | — | — | 19,424 | |
| — | 2.00 | — | — | ||
| Supply and fixing of Double Door MCB TPN Distribution Box 8 module 4 row 1 MCB 4P 40A 10kA, 1 RCCB 40A 30mA, 24 SP MCB 40-6A "C" series. MCB, RCCB and DB should be as per tech spec. and of same make. Inspection: Consignee, Inspection charges: None. | — | — | — | 40,110 | |
| — | 100.00 | — | — | ||
| Supply of HDPE pipe 160mm dia, wall thickness minimum 7.7 mm, PN-4, PE 63 conforming to IS 4984: 2016 as per requirement. Inspection: Consignee, Inspection charges: None. | — | — | — | 18,100 | |
| — | 3000.00 | — | — | ||
| Supply of 4 x 70 sq. mm, 1.1KV grade, LT XLPE insulated PVC outer sheathed aluminium conductor armoured cable confirming IS: 7098 (Part-1) and as per tech spec. of reputed make. Polycab/Finolex/KEI /Havells/ RR Kabel /Universal/ V-Guard/ Anchor/ RPG/CCI or similar. Inspection: RITES, Inspection charges: Borne by Railways | — | — | — | 9,75,000 | |
| — | 3000.00 | — | — | ||
| Laying, connecting, testing and commissioning of 4x70 sqmm, 1.1KV grade, LT PVC insulated PVC outer sheathed aluminium conductor armoured cable in trench/pipe as per spec (Cable will be supplied by railway). Inspection: Consignee, Inspection charges: None. | — | — | — | 51,000 | |
| — | 1000.00 | — | — | ||
| Laying, connecting, testing and commissioning of 4x185 sqmm, 1.1KV grade, LT PVC insulated PVC outer sheathed aluminium conductor armoured cable in trench/pipe as per spec (Cable will be supplied by railway). Inspection: Consignee, Inspection charges: None. | — | — | — | 21,000 | |
| — | 2.00 | — | — | ||
| Supply, erection, testing and commissioning of 16 Mtrs high mast shaft totally hot dip galvanized and suitable for wind velocity as per IS 875 part-3 as per spec Inspection: Consignee, Inspection charges: None. | — | — | — | 3,98,992 | |
| — | 1.00 | — | — | ||
| Design and casting of suitable foundation with M-20 concrete for the 16mtr high mast having the safe soil bearing capacity at site as 10T/sqmtr at 2-meter depth including supply of foundation bolts manufactured from special steel along with nuts, washers and anchor plates and templates. Soil bearing capacity testing will be required before starting the work. Foundation design calculation & cube test is also required as per standard. Inspection: Consignee, Inspection charges: None. | — | — | — | 18,471 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCwithACS10.pdf
ATTACHMENT
CableCutJPOBikanerDivision.pdf
ATTACHMENT
GCCACS11_compressed.pdf
ATTACHMENT
19-HSRRRBNWCLHLLGS.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .