Supply, Installation, Testing and Commissioning(SITC) of fire-fighting detections/Alarm System with other Civil and Electrical works at SKIMS Soura-Reappropriation of allocation under different heads(Balance Work Civil).

Percentage BoQ At Par

Select, At Par, Excess (+), Less (-) IOCL Select Excess (+) Less (-) At Par (=)

Tender Inviting Authority: EXECUTIVE ENGINEER(CIVIL) R&B,Division Soura.

Name of Work: “Supply,Installation,Testing and Commissioning(SITC) of fire-fighting detections/Alarm System with other Civil and Electrical works at SKIMS Soura-Reappropriation of allocation under different heads(Balance Work).

Contract No: EE/R&B/Divn/Soura/e-Tender NIT-10 of 2026-27 Dated:- 06-08-2026. Advertised Cost( 48.92 Lacs.)

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P

1 Surface dressing of the ground including removing vegetation and inequalties not exceeding 15 cm deep and disposal of rubbishlead upto upto 1.5km (All Kinds of soil) 986.45 Sqm 24.12 Excess(+) Full Conversion INR

2 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. all kinds of soil 220.5 cum 187.3 Excess(+) Full Conversion INR

3 Supply and filling of dry stone soling maximum size 100 - 75mm duly hand packed including all carriages, leads and lifts up to site of work incl. carriage complete.finished work to be measured. 102.35 cum 1000 Excess(+) Full Conversion INR

4 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 37.33 cum 5202.9 Excess(+) Full Conversion INR

5 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 22.68 cum 9395.7 Excess(+) Full Conversion INR

6 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 13.17 cum 9821.85 Excess(+) Full Conversion INR

7 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 107.3 cum 7788.4 Excess(+) Full Conversion INR

8 Cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation, finishing and tamping complete. 63.98 cum 6540.45 Excess(+) Full Conversion INR

9 Steel reinforcement for RCC works including straightening, cutting, bending, binding and placing in position all complete. 15746.5 kg 123.2 Excess(+) Full Conversion INR

10 Centering and Shuttering including strutting, propping etc and removal of form work.

10.1 Foundation, footings, pile caps, bases of columns. 6.3 sqm 286.35 Excess(+) Full Conversion INR

10.2 Retaining walls, return walls, walls ( any thickness) including attached pilsters, butressess, plinth and string courses, fillets etc 137.4 sqm 628.95 Excess(+) Full Conversion INR

10.3 Suspended floors, roofs, landings, balconies and access plateform 32 sqm 718.2 Excess(+) Full Conversion INR

11 GSB/ sand matrix filling in plint etc in layers not exceeding 20cm in depth consolidation each layer by ramming watering inc all carriages complete. 80.73 cum 1000 Excess(+) Full Conversion INR

12 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 365.87 kg 120.8 Excess(+) Full Conversion INR

13 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded 1659.6 kg 138.2 Excess(+) Full Conversion INR

14 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)( Frames / Shutters) 180 kg 514.3 Excess(+) Full Conversion INR

15 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides. 20 sqm 933.35 Excess(+) Full Conversion INR

16 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 5.0 mm thickness 20 Sqm 1201.8 Excess(+) Full Conversion INR

17 15mm cement plaster on the rough side of single or half brick wall of mix .1 : 6 ( 1 cement , 6 fine sand) Upto Floor V level complete in all respects 293.72 Sqm 306.85 Excess(+) Full Conversion INR

18 Providing and applying white cement based putty of specified thickness 2mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 543.01 sqm 181.05 Excess(+) Full Conversion INR

19 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.two coats. 543.01 sqm 109.9 Excess(+) Full Conversion INR

20 Painting with synthetic enamel paint of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two or more coats on new work. 128.98 Sqm 131.85 Excess(+) Full Conversion INR

21 Carriages of materials by mechnical transport.

21.1 Sand from 12Km 114.44 cum 305.22 Excess(+) Full Conversion INR

21.2 20mm Aggregate from 20 Km 128.83 cum 409.94 Excess(+) Full Conversion INR

21.3 40mm Aggregate from 20Km 91.17 cum 445.64 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information