REPAIR/MAINT OF FENCING AT MIL STN TALBEHAT

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed natural ground complete all as specified and directed by Engineer-in-Charge.

Excavating in post holes in soft/loose soil each n. exc. 0.5 cum getting out , returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering & removing surplus soil to a distance not exc 50 m and making good surface complete all as specified and directed by Engineer-in-Charge.

Dismantling of Barbed wire fencing or any type and size complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:4:8 type D-2 (40mm graded stone aggt) in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in PCC band, copping etc complete all as specified and directed by Engineer-in-Charge. Note:- The rates include for use of formwork(straight or curved)

S&F mild steel for post and struts in fencing incl cutting tops to shape as directed , drilling holes notching for wire etc flat iron fillets ( for securing wire mesh etc ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe - 290( Gde E-165 ) complete all as specified and directed by Engineer-in-Charge. MAKE:- Tata steel/Sail/Tisco

Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete all as specified and directed by Engineer-in-Charge. Make - TATA STEEL / SAIL / TISCO

Supply & fixing chain link fencing of galvanised steel wire 3.15 mm dia confirming to as per IS-2721-1979.wiremesh of size 100 x100 mm. incl line wires, any mesh, and any type of standards, rails, straining bolts, etc incl provision of binding wire complete all as specified and directed by Engineer-in-Charge.

S&F for Galvanised Mild steel Barbed wire, 2 strand or 2.24 mm dia and barbed with 2.0mm dia barbs of 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed by Engineer-in-Charge.

S&F 10mm dia of shank Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5 cm long complete all as specified and directed by Engineer-in-Charge.

M&L applying 2 coats of synthetic enamel paint over one coat of primer on steel surface of any description over 10 cm in width & girth incl preparation of newly steel surface complete all as specified and directed by Engineer-in-Charge. MAKE- Asian paints (Appcolite)

S&F framed work in doors or gates in angle or other section with gusset plates, rails, braces etc complete drilling for fixing and steel sheeting or other covering including taking down Fe 410-w (Gde-E-250) quality A complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new of previously untreated steel surfaces of any description not exc 10 cm width or grith not otherwise described and with one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Demolition of brickwork built in cement mortar with all quoins, pillars etc complete all as specified and directed by Engineer-in-Charge.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 straight or curved on plan exc. 6m mean radius, using old size bricks, complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick external plastering in cm (1:4) on fair faces of brick work or concrete surface including finishing the surfaces fair and even complete all as specified and directed by Engineer-in-Charge.

M&L for applying three coats of white wash to wall surface including preparation of newly plastered untreated surface complete all as specified and directed by Engineer-in-Charge.

M/s Indu Enterprises

M/S Kharya Associates

HARNAM SINGH ANIL SINGH