WELCOME MAINTENANCE, REPAIR TO ROOF, LEAKAGE SEEPAGE, TILING, JOINERY, FLOORING, CERTAIN BR WORKS AND CERTAIN INTERNAL EM WORKS AT AF STN NARAINA UNDER AGE BR AF RAJOKRI AND AGE EM AF RA JOKRI OF GE AF GURGAON

Amount

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of Cement base paint complete all as specified and as directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper complete all as specified and as directed.

All as per item No-2 above but on surfaces of ceiling.

M&L preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old surfaces or unplastered of external surfaces of walls, parapets, fins/ facia, chajjas by wire brushing and washing, rubbing down and stopping of surfaces and levelling/ edging the disturbed places/ edges using necessary refilling compound of cement based putty to obtain smooth regular/ even finish surface using sand paper and applying two coats exterior emulsion paint over a coat of primer complete all as specified and as directed.

M&L for preparation of old surfaces or unplastered surfaces of wall and applying one coat of exterior emulsion paint including applying birla putty before applying the appex paint complete all as spd and directed by Engr-in-charge

Taking down plaster of any description on brick or stone walls etc. including raking out joint, hacking for key, scrubbing down with water etc incl patches of any size complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces including rendering on fins , fascias, chajjas, parapets etc. and finishing the surfaces even and fair without using extra cement complete all as specified and as directed.

M&L 10mm thick rendering in cement mortar 1:6 on brick or concrete surfaces including finishing the surfaces even and fair without using extra cement complete all as specified and as directed.

M&L 10mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for Washed stone grit plaster on exterior walls in two layers , under layer 12mm cement plaster 1:4 (1 cement : 4 Badarpur sand / Jamuna sand 50:50) incl GI chicken wire mesh 24 Gauge & 20mm mesh shall be fixed all along RCC and brick joints in a width of 150mm with cement slurry pegs before layer applying under layer plaster , furrowing the under layer with scratching tool, before application of top coat the cement slurry on the under @ 3 Kg of cement per Sqm with pigment shall be applied , top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size) mixed with pigment (300 gm to 500 gm per 50 Kg bag of cement) in panels with groove all around as per approved pattern including scrubbing and washing , the top layer with brushes , clean water and hydrochloride acid to expose the stone chippings to its natural colour incl nailing with 50mm MS nail @ 300mm both ways on wall surface complete all as specified and forming groove (area of each panel not exceeding 2 sqm each) of size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens , nailed to the under layer including removal of wooden battens , repair to the edges of panels and finishing the groove complete incl taking down old plaster complete as all specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls/ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls, fascias, chajjas, parapets etc. and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm and n.exc 4 Sqm each and removing from site complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm and removing from site complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges/box type hinges with steel handle, and steel peg stay, complete including lugs with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges/box type hinges with steel handle, and steel peg stay, complete including lugs without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hardwood plain framed, panneled shutters with lock rail and pannel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rails and stiles as per IS-1003 (Part-1) Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F factory made 35mm thick flush shutters solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified and as directed.

S&F in repairs for 12mm thick toughened frosted glass door with 02 Nos of door handle (model No. SMDH-WSS-55 size 50x302x500), top and bottom pivot with heavy duty floor spring including fixing of 3mm thick Stainless steel bracket with L-connector/Glass to glass 180 degree / glass to glass 90 degree/U-connector (partly fixed and openable) including fixing of Double Door Lock and other necessary fitings complete all as specified. Door glass to be fixed on wall/floor/RCC member will be fixed as directed by Engr-in-Charge. Note :- All builder hardware will be of stainless steel The glass so fixed should be air tight and no air gap should be left at any position.

S&F in repair powder coated (thickness of powder coating not less than 50 micron) anodised aluminium frame for door shutters, windows ventilators with one or more reir bates with and including joining cleats for fixing etc complete all as specified and directed.

S&F in repairs powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutter fixed / openable type with sash bar aluminium section weighing 0.55 Kg/RM including necessary jointing cleat glazing, clip,rubber packing, anodised aluminium snap beading, hinges type B-21 100mm long (2 No) suitable handle (2 no.) peg stays 150mm long, screws etc complete all as specified and directed. Note :- Glass panes in panels shall be measured and paid separately.

S&F in repair powder coated (thickness of powder coating not less than 50 micron) anodised aluminium door shutter , aluminium section weighing 0.55 Kg/RM including necessary jointing cleat glazing, clip,rubber neoprene packing, handles 2Nos in each door, hinges, anodised powder coated aluminium snap beading screws etc. complete all as specified and directed. Note :- Glass panes in panels shall be measured and paid separately.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying a coat of priming coat of pink primer and applying two coat of synthetic enamelled paint complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F solid PVC door frame of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing. Make:- Rajshri/Sintex

S&F factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing as specified. Make:- Rajshri/Sintex

Easing of door shutters for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed

S&F in repair mild steel handles of steel window replaced with new mild steel handles including welding to existing window, MS sheet / flat iron and including all modification required for existing window to fix new handles complete all as specified and directed

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles , knobs tightening piano hinges incl misc small adjustments complete all as specified and directed

S&F in repair MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F in repair mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening including holdfast and fixing complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 125mm size aluminium handle cast type anodised complete all as specified and as directed

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed

S&F stainless Steel Butt hinges of 100 mm size, complete all as specified and directed.

All as per item No 40 here-in-before but 75mm size.

S&F double legged door stopper of aluminium alloy with rubber complete all as specifified and as directed.

S&F mild steel ordinary rat tail rod pattern springs including rollers and roller plate complete all as specified and as directed

M&L for cement concrete Type B-0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door frames of pressed steel and in bed blocks etc complete all as specified and as directed.

S&F in repair door seals made of aluminium strip powder coated 20 mm wide and provided rubber/ cotton mat lining fixed with screws to door shutters up to 1m width opening complete all as specified and as directed.

Dismantling boarding of any description , fixed in any position with nails complete all as specified and as directed.

S&F in repair 25mm thick flush shutters, as in cupboard , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F 9mm thick plywood grade BWR type BB fixed with screws to timber framed complete all as specified and as directed.

S&F 18 to 19mm thick block board grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber framework as in shelves, drawers etc complete all as specified and as directed.

S&F 40mm dia cup board/ kitchen cabinet knob of wood finish fixed with nut, screw and washer complete all as specified and as directed.

S&F magnetic catcher 50mm long complete with plate fixed with screws complete all as specified and as directed.

S&F in repair 15 mm bore bib tap cast copper alloy with crutch or butterfly handles screwed down for iron pipes or for brass ferrule complete all as specified and as directed

S&F in repair 15 mm bore bib tap copper alloy chromium plated, fancy type, long shunk screwed down for iron pipes or for brass ferrule complete complete all as specified and as directed

S&F as in repair 15 mm bore pillar taps cast copper alloy capaston head chromium plated, fancy type screwed down high pressure with or without lettered “ HOT” or “ COLD” with long screwed shanks and fly nuts screwed for iron pipes fixed as in repair complete all as specified and as directed

S&F in repair 15 mm bore stop valve/angle valve cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and as directed

S&F in repair 15 mm bore Two in one angle valve cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and as directed

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore and fixed as in repair complete all as specified and as directed

All as per above item No 57 above but 20 mm bore

S&F as in repair shower rose of 100mm circular type cast copper alloy, chromium plated, fancy type, with swivel joint fixed to 15 mm bore iron pipe complete all as specified and directed

S&F in repair waste fitting brass chromium plated of 32 mm dia for wash hand basin with long screwd sanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed

All as pe item No 60 above but 40 mm dia for sinks

S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia complete all as specified and directed

S&F in repair PVC flushing cistern low level of 10 Ltr capacity valveless, symphonic action type (white colour) with inlet, balll valve, float end handle including flush pipe of 32 mm bore MS chromium plated and connection to pipe etc complete all as specified and as directed.

S&F in repair PVC flush bend 32 mm bore with two Nos check nuts for connecting to low level flushing cistern top European type water closet or Indian type water closet including cement joint complete all as specified and as directed

S&F in repair 125mm/150mm dia mild steel chromium plated grating fixed on floor trap/Nahni trap with CM 1:6 complete all as specified and as directed

S&F 32 mm bore chromium plated bottle trap for wash hand basin with inlet & outlet screwed for iron pipes or connection including necessary packing , union and cap as in repair complete all as specified and as directed

S&F as in repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron ‘P’ trap incl lime concrete bedding and making good to the disturbed surface to match with the existing surface of floor complete all as specified and as directed

S&F as in repair vitreous china wash down water closet pan (Pedestal Pattern) EWC white (excluding flushing cistern & flush pipe) incl connection to out going pipe and flushing pipe complete all as specified and as directed

S&F as in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed

S&F in repair vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed

S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen or liboratory with plugs washers and waste incl bedding in cement mortar to dwarf walls or including fixing cantilever brackets and connecting union to pipe over all size 915mmx460mm bowl size 410x330x160mm complete all as specified and as directed

Taking down 15 mm bore mild steel tubing and connections incl cleaning for refixing or removal from site complete all as specified and as directed

All as per item No 72 above but for 20 mm bore

S&F 15 mm bore mild steel water tubing medium grade galvanized with all fittings and fixture fixed to walls ceiling , concealed in walls or laid in floors complete all as specified and as directed

All as per item No 74 above but for 20 mm bore

Disconnecting to existing PVC tanks , setting aside ( for lowering down if required ) for repairs , if hoisting if required reconnecting and refixing in position cap upto 1000 ltr including cleaning of overhead tank including removing the sludge washing down with detergent powder & writing the date of cleaning with paint complete all as specified and as directed

S&F as in repair rotational moulded polythene water storage tank of capacity 500 Ltr 3 layer (cylindrical vertical with closed top cover), hoisted and fixed in position all specified in SSR part –I ( 1991) complete all as specified and as directed by Engineer-in-Charge Note : The cost of accessories like inlet and out let pipe ball valve to air vent pipe shall be measured and paid separately under concerned item No thing extra admissible on this account

All as per item no 77 above but 1000 ltrs 3 layer

S&F in repair brass face heavy duty for pillar cock, CP stop cock CP Bib cock and concealed stop cock complete all as specified and directed

M&L 40 mm thick PCC ( 1:24) type B-1 , 20 mm graded stone aggregates laid in alternate bays as in floor surface finished even and smooth without using extra cement including roughening to existing concrete surface and using cement slurry @ 3 Kg/Sq mtr before laying concrete in floor complete all as specified and as directed

S&F 3mm thick & 28mm wide glass dividing strips

Dismantling of floor , hearth , or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for ceramic coloured / non-skid tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) and pointed complete all as specified and directed

M&L for Vitrified ceramic coloured tiles 9 to 10 mm thick (square / rectangular) area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) and pointed complete all as specified and directed

Ditto all as per item No 83 above but on vertical surface such as skirting / dado etc

Ditto all as per item No 84 above but on vertical surface such as skirting / dado etc

M&L for Glazed ceramic coloured tiles in vertical surface 450X 300X 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tiles including 10 mm thick screed bedding layers in CM (1:4) and pointed complete all as specified and directed.

Cutting holes in brick walls/concrete surface to clear the junction of CI pipes & fitting coming at outer face of the out side wall or any other situation ands making good the dismantled portion in cement mortar 1:4 or cement 1:2:4 type BI to match the existing surface.

Easing andAdjusting aluminium door and window including refixing beading after replacement of defective portions such as door closer, aluminium handles, hinges, locks, new rubber gasket, aluminium beading, preleminated prarticle board, sheet glass etc complete. all as specified & as directed by Engineer-in-Charge. Notes : Door closer, door spring, aluminium beading, preleminated gasket, aluminum beading, preleminated particle board, sheet glass shall be measured and paid separately under respective item of schedules.

S&F of 12 mm thick particle board preleminated on both side decorative choice etc complete all as specified and as directed

S&F of floor door spring etc complete all as specified and as directed

S&F of door closer hydraulically regulated design No 2etc complete all as specified and as directed

S&F of Mortice lock vertical type 4 lever etc complete all as specified and as directed etc complete all as specified and as directed

S&F of Rubber gasket for fixing aluminium door and window shutters etc complete all as specified and as directed

S&F of aluminium beading for fixing of aluminium door and window shutter etc complete all as specified and as directed

S&F of 150 mm long aluminium tower bolts for aluminium door and window shutter etc complete all as specified and as directed

S&F of aluminium handles 150 mm long for aluminium door and window shutter etc complete all as specified and as directed

S&F of aluminium handles 100 mm long for aluminium door and window shutter etc complete all as specified and as directed

S&F of 5 mm thick sheet glass tinted ordinary quality for fixing of aluminium door and window shutter Partitions etc complete all as specified and as directed

S&F in repair curtain rods with mild steel conduit pipe 25 mm bore with covering of PVC sheet with fancy eves with wall thickness 1 mm thick incl MS chromium palted brackets holders or screwed to pelmet boxes or to fixed in walls incl domes and side walls complete all as specified and directed

S&F in repair MS chromium plated tubular towel rail 20 mm dia ‘D’ type 60 Cm long between flanges to wall with chromium plated brass screw, washers and nylon sleeves complete all as specified and directed

S&F in repair 2nd class hard wood beading straight (any size) for glazed/gauged joinery, renewed incl mitered etc complete all as specified and directed

M&L for repairs to sliding door bolt, hinges, pintel, locking arrangment, spike, roller, roller rails etc of steel gate/Wicket gate including welding /reveting to bring the steel gate /wicket gate in service condtions etc complete all as specified and directed

M&L for repairs to rolling shutter including necessary gressing, welding, locking arrangement including serviceing to gear box etc complete as to bring in service condtions etc all as specified and directed

M&L for repairs to collapsible steel gate including necessary gressing, welding, locking arrangement including serviceing etc complete as to bring in service condtions all as specified and directed

Dismanting of rolling shutter

S&F 1.25mm thick Steel rolling shutters, gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed

S&F Safety lever locks mild steel with 4 levers incl ball bearing for rolling shutters complete all as sspecified and directed.

S&F Toilet paper holder model NL 55 make ESS ESS or equivalentand all as directed

S&F Acrylic shelf 46X13cm make ESS ESS model (TM 07) chrome or equivalent complete all as directed

S&F in repair corner shelf with CP railing 300mm x 300mm complete all as directed

S&F in repair CP jet for EWC along with pvc connection complete all as directed

S&F CP brass Health faucet with 15mm bore pipe all as directed

S&F for CP brass liquid soap container fixed with and incl CP brass screws as as directed

Dismantling of polycarbonated sandwitch type sheets

S&f 6.00 mm thick polycarbonate sandwitch type sheets in semi circle shape on roofs of desired colour and fixed with aluminium metal flat / angle / tee sections including rubber beadings and silicon water proofing sealent jell for joining the sheets together and self tightening screws of reputed quality and make complete all as specified and directed

Dismantling mild steel work of any description not otherwise provided for

S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe 410 - S

S&F steel work as in tubular, rafters, purlins, posts and similar work (round/sqare/rectangular shape of pipes as approved by Engr-in-charge ) trusses of semi circle/ curved shape up to height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or any insulations boards/slabs/blankets, any thickness, including cover fillets.

M&L for clip metallic powder coated 0.5mm thick false ceiling with GI frame work made up of standard Tee, angle or any other section as in grid type ceiling frame work as approved by GE. Ceiling shall be hanged to roof trusses/purlin rafters with the help of GI wire not less than 4mm dia at an interval not exc 1 mtr the size of metallic powder coated ceiling tiles 600mmx600mm as approved by GE and as directed.

Supply and fixing in repair snap grid ceiling with 4mm thick E-board of approved size 60 CM x 60 CM supproted on and including aluminium alloy anodised angle 25 x 25 x 1.5 mm at edge and tee section 25 x 38 x 1.5mm at edges and edges placed both ways at a spacing 60 CM center to center including necessary aluminium alloy anodised cleats and 3mm dia GI wire suspenders fixed to ceiling not exceeding 120cm center to center both ways including two equivalent in Bhutan Board/ India Gypsum/Kitply/Duratuff/Anchor.

S&F venition blind for window including necessary items required for fix to wall complete all as directed

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed by Engineer-In-Charge

Demolition of stone slabs and tiles in any position all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

Dismantling of wall cladding tiles complete all as specified and directed

M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base of floors.

M&L for designer coloured wall cladding tiles, Size, colour and shape as approved by GE, set and jointed in neat cement slurry and pointed with coloured cement to match etc complete all as specified and as directed

M&L for 15mm thick in CM 1:4 as backing coat coat of wall cladding etc complete all as specified and as directed

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed

S&F fabricated anodized aluminum grill of size 75x75mm, using 5mm dia bars fixed to frames using U/V section runners complete all as specified and directed by Engr-in-Charge

M&L 75 mm thick PCC type D-2 (1:2:4) using 40mm stone graded aggregate as in floor sub base

Hacking out old broken glass, any thickness from wooden frame/ ms frame of window/ventilators and M & L for 3mm thick sheet glass plain/figured , pin headed with oil putty glazing pin and wooden beading

S&F in repair 20mm PVC ball valves high pressure with epoxy coated aluminum rod & high density plastic ball screwed for iron or for union complete all as specifie and directed

S&F in repair 15mm PVC ball valves high pressure with epoxy coated aluminum rod & high density plastic ball screwed for iron or for union complete all as specified and directed

S& F 15mm size PVC connection pipe with PTMT nuts length 600mm

M&L for cement concrete 1:4:8 type D-2 (using 40mm gde agg) as in foundation or sub base and mass concrete etc complete all as specified and directed by Engineer-In-Charge

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed

Demolition of plain cement concrete in any floors and paving not exc 15 cm thick above or below ground level including tiles if any

Removal existing roof treatment etc. APP membrane and taking down of cement plaster on roof

M&L15 mm thick rendering in CM 1 : 4 on roof top of concrete surface including finishing the surfaces even and smooth without using extra cement with water proofing compound as per manufacture instruction etc. complete all as specified and directed Note: WPC shall be measured and paid seperately

Supply only WPC

M&L PCC 1:2:4 tpye B-1 using 20mm graded stone aggregate as in copping benching gola and the similar items complete all a specified and as directed

M&L for 3mm thick APP modified prefabricated membrane in five layers & weight not less than 3.6 Kg/Sqm water proof membrane reinforced with non-wooven polyester two coats of aluminum paint over top surface of water proofing membrane with 10cm longitudinal and horizontaling over lapping and joints finally thermo-fused with LPG flames laid over and including a tack coat of bitumen primer @ 1.20 Kg per Sqm as per manufacturer's instructions of APP modified membrane sheet complete all as specified and directed

E/M Works Taking down carefully copper/aluminium point wiring light ,fan, socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. Complete all as specified and directed.

Taking down old unserviceable main switch/DBs/mcb DBs with MCB including making good the disturbed surface complete as directed

Taking down old existing light fitting of any type complete all as specified and directed.

Taking down sub main wiring of any size complete all as specified and directed.

M&L for point wiring with two runs of FRLSH PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn through in and including PVC conduit size of not less than 20mm concecled in wall / surface including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed.

One light point controlled by one switch one way

One celling/exhaust fan point controlled by one switch one way

One socket out let 5 Amps 5 pin on independent board

One socket outlet 5 Amps 5 Pin on same board with other switches

One bell/buzzer point controlled by one bell push on independent board

All as per item No 154 here in before but with cable size 2.5 Sq mm for one 3/5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 1.5 sqmm all as specified and directed.

S&F in replacement of switch piano, flush type, 5 amps, single pole, one way

S&F in replacement of socket outlet 2in1, 3 pin 5 Amps flush type

S&F in replacement of socket outlet 2in1, 6 pin 15/5 Amps flush type

S&F in replacement of switch piano, flush type, 15 amps, single pole, one way

S&F in replacement of ceiling rose surface bakelite two to three terminals.

S&F in replacement of bell push , 5 amps, single pole, one way.

S&F in replacement of call bell, Ding dong type, 230 volts AC single pole complete all as directed.

S&F in replacement of ceiling fan regulator stepped electronic type 300 watt rating all as directed.

S&F in replacement of modular switches 6 amps single pole one way

S&F in replacement of modular switches 16 A single pole one way

S&F in replacement of modular socketes out let 6 amps 5 pin

S&F in replacement of modular socket out let 6-16 A 3 pin combined shuttered

S&F in replacement of modular white cover plate with frame 3 modular

S&F in replacement of Flush metal boxes 3 modular

S&F in replacement of modular white cover plate with frame 6 modular

S&F in replacement of Flush metal boxes 6 modular.

S&F in replacement of modular white cover plate with frame 12 modular

S&F in replacement of Flush metal boxes 12 modular.

S&F in replacement of MCB distribution board vertical triple pole and neutral 8 way factory made sheet steel, phosphates, powder painted with 100 Amps rated busbar, 415 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one all as specified.

S&F in replacement of MCB distribution board triple pole and neutral 4 way factory made sheet steel, phosphates, powder painted with 200 Amps rated busbar, 415 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one all as specified and directed.

S&F in replacement of MCB distribution board single pole and neutral 8 way factory made sheet steel, phosphates, powder painted with 100 Amps rated busbar, 240 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one all as specified and directed.

S&F in replacement of MCB distribution board single pole and neutral 4 way factory made sheet steel, phosphates, powder painted with 100 Amps rated busbar, 240 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one all as specified and directed.

S&F in replacement of MCB SPN 63 Amps, 10 KA,240V, 50Hz, 'B' Series complete all as specified and as directed.

S&F in replacement of Casing capping double lock type supper quality size 15 mm width ISI marked with fixing accessories complete all as specified and directed.

S&F in replacement of rigid non metalic PVC medium grade conduit of 15 mm bore including boxes, tees,bend and fixing accessories such as copper,lock nut, saddles,pipe huck etc complete all as specified and directed by Engineer in Charge.

ditto item No 180 but for 20 mm bore.

S&F in replacement of flexible conduit of size 25 mm complete all as specified and directed.

S&F in replacement of lights fitting luminaires with 18 watt LED sleek pressure die cast aluminium housing ,heat resistance toughened glass with IP protection for better optics fo uniform distribution internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed by Engineer-in-charge.

S&F in replacement of Recess mounted light with LED 36 Watt energy saving recess mounted luminaire suitable for 600mm x 600mm Modular/POP/Gypsum ceiling complete all as specified and as directed.

Supply and Fixing in replacement of LED Decorative post-top for 360 degree indirect light IP-65 grade of proterction with High power LED of 40 watt with resistance to impact and corrosion. Glare free and better uniformity.Milky version .complete all as specified and as directed . Note : Any reducer to suit the manufacturer mounting dia for fixing of fitting to existing bracket shall be deemed to be included in the rates quoted by the Contractor.

S&F in replacement of sheet metal enclosure with socket plug top and MCB single pole and neutral with two pin and earth plug with one SP MCB 20 Amp 240 volt complete all as directed.

M/L for Sub main wiring with 2 Run of 4 Sqmm cable and one run of 2.5 sqmm PVC insulated, unsheathed FRLSH cable of multistranded copper conductors 1100 volt grade IS- 694 marked drawn through and including non metalic PVC conduit pipe medium grade ISI marked (not less than 20 mm dia) along with fittings and accessories concealed on wall and surface on ceiling complete all as specified and directed by Engineer in charge. Note :- 2 run of 4 Sqmm & one run of 2.5 Sqmm & PVC conduit shall be measured as single run

Ditto item No 187 but 2x2.5 sqmm and 1x1.5 sqmm.

Ditto item No 187 but 2x6 sqmm and 1x 4.0 sqmm.

Ditto item No 187 but 2x10 sqmm and 1x6.0 sqmm.

S&F in replacement of in replacement of of PVC insulated unsheathed cable, single core multi stranded copper conductor, 1100 volts for the following cross sectional area:

S&F in replacement of PVC gang box suitable for one switch and socket 5 Amps complete with screw and necessary arrangement complete all as specified and directed.

Ditto item No 192 but suitable for one switch and socket 15 Amps

S&F in replacement of Floroscent Tube Lamp from Retro LED of 20 Watt , tube Energy saving recess/surface mounted luminaire ,High efficiency PMMA diffuser for soft glare floor light.

S&F in replacement of Floroscent Tube rod four pin 36 watt. Suitable for ceiling light

S&F in replacement of CFL bulb with LED Bulbs 5/9 Watt complete all as specified and as directed.

M&L for taking down and overhauling of ceiling fans 1200/1400 mm, including dismantling and opening fan and cleaning oiling and painting to existing colour of fans reassembling after proper greasing oiling of any make and size.

Ditto item No 197 but Exhaust fan 9” to 18 “ complete

M&L Rewinding of ceiling fans with suitable size of super enameled copper wire complete for size of fans 1200/1400 mm sweep of any make and size complete

Ditto item No 199 but exhaust fans 9” to 18 “ complete.

Supply and fixing in replacement of bearing of ceiling fan/ size 1200/ 1400 mm and exhaust fan 9” to 18“ of any make and size complete all as specified & directed.

S & F in replacement of bushes of gun metal or suitable size for 1200/ 1400 mm sweep ceiling fan and wall mounting in 15 “ to 18 “ complete all as specified and directed.

S&F in replacement of capacitor 2.5 md 230 volts 50 Hz complete all as specified and directed.

S&F In replacement of capacitor 3.15 Mfd 230 volts 50 Hz complete all as specified and directed.

S&F In replacement of capacitor 4 Mfd 230 volts 50 Hz complete all as specified and directed.

M&L for rewinding of fan motor of desert cooler with super enameled copper wire of existing gauge complete all as specified and directed.

M&L for replacement of bushes /bearing of fan motor of desert cooler complete all as specified and directed.

M&L for replacement of tullu pump submersible for desert cooler complete all as specified and directed.

M&L for replacement of fan motor blade suitable of any size of desert cooler complete all as specified and directed.

M&L of cut wood pad set of superior quality for desert cooler ( set of Three ) complete all as specified and directed.

M&L for plastic distributor 3 way of super quality for water cooler complete all as specified and directed.

Supply and Fixing of wall mounting fan 400 mm sweep 230 Volt oscillating type complete all as specified & directed.

Supply and Fixing in replacement of Exhaust fan 300 mm sweep 230 Volt plastic body type complete all as specified & directed.

M& L for grouting of fastener (screw type ) ,washer ,bolt in wall for geyser/ Exhaust fan complete all as specified and directed.

S & F in replacement of Copper Cable lugs/Thimbles upto size 10 sqmm complete all as specified.

M/S Rohit Enterprises

MRITUNJYA ASSOCIATES