Improvement and Development of Electrical Installation at M and CW Centre Welcome in Ward No. 39-E Under Shahdara (North) Zone

Amount

Rewiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable and 1.5 sq mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel conduit inculding dismantling as required Group B

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (a)3 Module( 100 mmX75 mm)

(b) 4 Module (125mmX75mm)

(C) 6 Module (200mmX75mm)

(d) 12 Module (200mmX150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (a) 5/6 A switch

(b) 3 pin 5/6 A socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required (a) 3 x 2.5 sq. mm

(b) 3 x 6 sq.mm

(c) 3 x4 sq mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm

SITC of surface mounting LED luminaire suitable for 20 watt box type LED rating complete with extruded aluminium batten prewired with high efficient LEDs with the following: a) Total System Wattage 20 ±5% Watt b) Luminaries effucacy ≥ 100 lumens/watt c) Power factor ≥ 0.95

S/I/T/C of Surface mounting CRCA housing 8W LED luminaire with acrylic cover diffuser with following specifications including fixing on existing wall/surface with connections as reqd. (a) Total system wattage = 8watt +/- 5% (b) Luminus effcacy >=95 lumans /watt. (c) Power Factor>=0.95

Supplying and fixing following rating, four pole, (three phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a) 63 Amp.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Double pole

supply of XLPE Insulated PVC Sheathed Al. Conductor Armoured Cable for working voltage upto 1.1kV confirming to IS-7098 (Part-I) 1998 as required. 2x10sqmm

4x25sqmm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door

Supplying and fixing extra down rod of 20 cm length G.I. pipe ,15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

S/I/T/C of 15 (300mm) sweep Fresh Air fan heavy duty complete with shutters, blades etc as reqd.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing & Fixing of ABC (Ammonium Phosphate) powder type Fire Extinguisher of 6 kg capacity complete in all respect with ISI mark i/c fixing arrangement as reqd.

Providing & Fixing 4.5 kg Co2 type Fire Extinguisher sqeeze grip type, trolly wheel as well mounted type complete in all respect with ISI mark i/c fixing arrangement as reqd.

Providing and Fixing of inverter with sine wave technology of capacity 1500 VA with 2 Nos. 150 Ah batteries (flat type Technology)and trolly suitable for keeping 2 Nos. batteries & 1 nos. inverter i/c wiring and connections etc as reqd

SITC of Synthetic Honeycomb pads stand/trolly mounted with caster wheels Plastic body Desert cooler with nominal air delivery 4000 cubic mtr/hour, tank capacity (min.) 80 ltr ,fan size 400 mm, Drain plug, minimum length of connecting cable 2.5 mtr with 3- pin moulded plug top and body material confirming to as per clause 5.1 of IS 3315 latest etc as reqd.