PROVISION OF RCC RETAINING WALL FOR PROTECTION OF PUMP HOUSE (PARWANOO) AT MIL STN KALKA UNDER GE (I) JUTOGH

Amount

Excavation over area not exc 1.5m deep in hard/dense type of soil and getting out complete all as specified and directed.

Excavation over area exc 1.5m but n. exc 3m deep in hard/dense soil and getting out complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated material (soils) to a distance exc 50 m but n.exc. 250 m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, complete all as specified and directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc vertical or to batter, complete all as specified and directed.

S&F TMT Steel bars 10 mm dia bar and over, cut to length bent to shape required including crancking, bending spirally and binding with and including steel wires (annealed) not less than 0.90 mm dia (Quality confirming to TMT bars), complete all as specified and directed.

M&L for Reinforced cement concrete (M-25 Design Mix) as Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns etc; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

M&L for Reinforced cement concrete (M-25 Design Mix) as Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footing; including attached pilasters and buttresses, complete all as specified and directed.

M&L for boulder filling dry hand packed tightly as in wire crating apron bunds, complete all as specified and directed.

S&F for PVC pipe 75 mm dia low density of pressure rating 10Kg/Sqcm (in short lengths) fixed in walls as weep holes as in retaining wall complete all as specified and directed.

Provisioning of hiring JCB for clearing of area , cutting of vegetation etc., and making temporary way for approching site to labour and material for 8 hrs of day, complete all as specified and directed.

S&F Angle iron as in posts and struts for fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to Fe-290 gde E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed.

Supply only chain link MS galvanised fencing, of size 4mm (8 SWG) 75mm x 75mm complete all as specified and directed.

M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410W (Gde E-250) quality A or Fe-290 (Gde E-165), complete all as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

S&F 12 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long, complete all as specified and directed.

S&F Framed work such as framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for Punched tape concertina coil 610 mm dia, made out of 2.60 mm dia ( + 0.05 mm) high tensile spring steel wire (1620 MPA) with having zinc coating of 120 gms/Sqm as per IS: 228.Each coil having a min 50 turns (Circles), average weight 7.50 to 8 Kg ( + ) 5% including handle and spikes at both ends of coil erect and fixed on top of the 'Y' Shape fencing, tied to the barbed wire/angle iron with suitable GI binding wires complete all as specified and directed. Specifications : Diameter : 610 mm No of Rounds : 50 rounds Stretch of each coil : 6-8 meter Total length of straight wire in each coil : 94.26 Meter barb Length (mm) : 11.50 mm (+- 2.00 mm) Weight of each coil : 7.50 to 8 Kg

M/S Dahiya Builders

Ajinkya Constructions