Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹39.2 L+₹2.4 L (6.52%)Rejected-AOC | L2 | Rejected-AOC Other than L1 | |
| 3 | L3₹41.0 L+₹4.2 L (11.5%)Rejected-AOC 1331 GENERAL GANJ OPP WATER TANK MATHURA 281001 | MATHURA | UTTAR PRADESH | 281001 | L3 | Rejected-AOC Other than L1 | |
| 4 | L4₹42.4 L+₹5.6 L (15.3%)Rejected-AOC | L4 | Rejected-AOC Other than L1 | |
| 5 | L5₹4.4 L−₹32.4 L (88.2%)Rejected-AOC B 68 MOTIKUNJ MATHURA 281001 UP | MATHURA | UTTAR PRADESH | 281001 | L5 | Rejected-AOC Other than L1 |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
21 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mathews M Shepherd, GE
Mathura Cantt
SPECIAL REPAIR TO TOILET SM BARRACK BLDG NO 37/A, 37/B, 37/C AND 37/D UNDER GE(WEST) MATHURA
2023_MES_584585_1
8300/1131/E8
Open Tender
Civil Works
Item Rate
180 days
GE (W) MATHURA
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (West) Mathura
₹95,000
Yes
31 Mar 2023
6 Mar 2023
22 Mar 2023
6 Mar 2023
21 Mar 2023
16 Mar 2023
Amount
Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4 Sqm each complete all as specified and directed.
S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.
M&L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed.
S&F Factory Made Solid PVC Moulded Door Shutters 35 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded colour PVC Sheet on the front Face & 5mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR. Complete all as specified and directed.
Taking down Chowkhats or frames not exc. 1.5 Sqm m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.
S&F Factory made PVC single door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as per specification and drawing of SSR Part-I and the door frame to be fixed to the wall using MS screw 75mm long with PVC fastener as per manufacturer's, instruction complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutters 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded colour PVC Sheet on the front Face & 5mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR. Complete all as specified and directed.
S&F aluminium anodised barrel tower bolts, 150mm long of extruded section complete all as specified and directed.
S&F Aluminium handles cast type anodised of size 150mm long, complete all as specified and directed.
S&F 150mm long stainless steel handles, oval type complete all as specified and directed.
S&F 300mm Aluminium sliding door bolts, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F mild steel framed work as grills, gratings etc with end of bars shouldred and / or rivited or forged into spikes, framed guard bar barred iron door ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed.
S&F steel ventilators with centre hung shutters including hinges with steel handle & steel peg stay complete all as specified and directed.
S&F stainles steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.14 mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pane complete all as specified and directed.
M&L for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamels paints over a coat of red oxide primer complete all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) in floors as sub base for floor finishing complete all as specified and directed.
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes. complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and including 10mm thick rendering on brick work/concrete surfaces in cement mortar (1:3) for skirting /dado finishes complete all as specified and as directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 20mm screed bedding in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.
Demolition of brick work or stone/boulders masonary, built in cement mortor including all quoins, arches pillars, etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
M&L for brick work built in cement mortar (1:4) with sub class 'B' bricks old size straight or curved on plan exc. 6m mean radius complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM in (1:4) finished fair and even complete all as specified and directed.
M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surface fair and smooth without using extra cement complete all as specified and as directed
M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar (1:4) complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of cement based paint over one coat of cement primer on walls complete all as specified and directed.
M&L for preparartion of new plastered surfaces of ceiling and applying two coats of white wash on ceiling complete all as specified and as directed.
Taking down wornout existing treatment from sunken portion of WC /Bath/Kitchen/Passage area n exc 2.5 Sqm each including taking down floor tiles, plaster, lime/cement concrete, WC trap complete empty of existing sunk. (Taking down of plumbing & sanitary fixing & fixture shall be measured under relevant items).
M&L for Cement concrete (1:5:10) type E2 using 40mm graded stone aggregate as in sunken portion complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces finished fair and even in CM (1:4) mixed with liquid water proofing compound complete all as specified and directed. Note:- Liquid WPC shall be measured and paid saperately.
Supply only Liquid water proofing compound of approved make complete all as specified and directed.
S&F GI tubes light grade, laid on sunken floor as on spout pipe 50mm bore complete all as specified and directed.
Taking up or down steel tubing 15mm bore pipe complete all as specified and directed.
Taking up or down steel tubing 20mm bore pipe complete all as specified and directed.
S&F GI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 15mm bore complete all as specified and directed.
S&F GI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 20mm bore complete all as specified and directed.
Taking down eaves gutters and rain water pipes, soil waste and vent pipe ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning for refixing ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.
S&F 100mm CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.
S&F 100mm CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints laid in trenches or floors including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.
S&F 100mm CI bends (any radius), diminishing pieces or tapers without oval access door (larger bore measured) complete all as specified and directed.
S&F 100mm CI bends (any radius), diminishing pieces or tapers with oval access door (larger bore measured) complete all as specified and directed.
S&F 100mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S&F 100mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.
M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
S&F 75mm CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.
S&F 75mm CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints laid in trenches or floors including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.
S&F 75mm CI bends (any radius), diminishing pieces or tapers without oval access door (larger bore measured) complete all as specified and directed.
S&F 75mm CI bends (any radius), diminishing pieces or tapers with oval access door (larger bore measured) complete all as specified and directed.
S&F 75mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S&F 75mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.
S&F in repair 15mm bore chromium plated bib tap cast copper alloy fancy type screwed down, screwed for iron pipe or for brass ferrule and fix complete all as specified and directed.
S&F in repair CP angle / stop cock fancy type chromium plated(Min weight 350gm) 15 mm bore screwed down, high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair vitreous china wash basin, white, flat back, size 550 X 400mm including waste fitting and brackets but excluding tapes, chain and plug etc complete all as specified and directed.
S&F PVC connection 15 mm size of lenght PTMT nuts 450mm long complete all as specified and directed.
S&F 15mm bore CP pillar taps Fancy type cast copper alloy (min weight 350 gm) along screwed down high pressure with lettered hot & cold with long screwed shanks and fly nuts screwed for GI pipe complete all as specified and directed.
S&F in repair chromium plated shower rose with or without swivel joints including fixing to steel pipe of 100 mm size complete all as specified and directed.
S&F in repair 15mm bore Stop valves fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs vitreous china urinal, half stall type, white incl 15mm bore push tap any colour of PTMT screwed for iron pipe and fixed complete including providing and fixing plugs with and including 60mm long brass screws, pointed around urinal back in cement; fixing discharge pipe, flush pipe, grating and union for discharge, complete all as specified and directed.
S&F of Vitreous China Squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as directed.
S&F in repair PVC valve less, symphonic action type, flushing cistern 10 ltr capacity, low level, white/coloured, with inlet, wall valve, float and handle, flush pipe including bracket complete all as specified and directed.
S&F in repairs Stainless steel gratings 100mm bore size fixed with white cement, complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank triple layer white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling old unservicable water tank of 750 Ltr capacity complete all as specified and directed.
S&F in repairs 20 mm dia Ball brass valve high pressure with polythene float and fly nuts complete screwed for iron pipes or brass ferrule and fixed complete all as specified and directed.
S&F 20mm GI nipple suitable for HDPE water tank complete all as specified and directed.
S&F Low density poly ethylene (LDPE) pipe 32mm dia of pressure rating 6 kgf/Sqcm complete all as specified and directed.
M&L for cutting chases, pining in making good to facing where required and pointed in CM (1:3) to ends or edges of landing , steps cills, sun shade, shelves etc and cutting chases for concealed conduit wiring etc and making good , match with existing surfaces by applying white/colour wash cutting not exc 10cm girth complete all as specified and directed.
M&L for 75mm thick cement concrete type C-2, (1:3:6) using 40mm graded stone aggregate as plinth protection and finished surface even and smooth with using extra cement complete all as specified and directed.
Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams, coloumn or slab and similar work including support if required and stitching of cracks with MS U clamps of 8mm dia @ 150mm c/c with inserting concrate block strecthner with cement mortar (1:3) mixed with adhesive chemical (polymer based) and reinforced with PVC chicken mash formwork including where ever required and finished with 10mm thick plastering in CM (1:4) finished even & smooth without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.
Dismantling brick / concrete tiles any size etc complete all as specified and directed.
Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) including removing the demolished material to a distance exc 250m but n. exc 500m and deposited where directed at a level n.exc 1.5m above starting point complete all as specified and directed.
M&L for Providing, cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate in coping, coving, roof padding, roof kerb on roof chamfered on edge complete all as specified and directed.
M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof :- (a) Cleaning palstered roof surfaces and applying a coat of oxidised bitumen based solvented primer a@ 0.3Kg /Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric water proofing membrance 3mm thick weight not less than 3.0 Kg/Sqm with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be sealed by flame complete all as specified and directed.
S&F precast hydraulically pressed PCC tiles of size 25cm x 25cm x 20mm thick laid over and including screed bed 15mm thick in CM (1:4) set and jointed in neat cement slurry and pointed in CM (1:3) mixed with WPC of approved make in screed bed and pointing on roof complete all as specified and directed.
M&L for applying a coat of two component elastomeric acrylic polymer modified cementitious water proofing coating, having properties of 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.
Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.
M&L for 75mm thick Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of slab complete all as specified and directed.
M&L for pre-polished chequered tiles (any colour) of size 30cm x 30cm x 25mm thick, with gray cement & pigment set, jointed and pointed in neat cement slurry in floors laid over and including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed.
M&L for sand filling under floors or in foundation complete all as specified and directed.
M&L for Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 18-20 mm thick laid and jointed with pigment to match the shade of the slab including rubbing and polishing including screed bed 20mm thick in CM (1:4) for laying finishes complete all as specified and directed.
M&L for kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including cement plaster 15 mm thick in CM (1:4) laid and jointed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.
Demolition and breaking up drain pipes, set in cement mortar 150mm internal dia (SGSW, AC or reinforced concrete) complete all as specified and directed.
M&L for concrete bed to drain pipes 200mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate complete all as specified and directed. Note :The thickness of concrete bed below the barrel of the pipe shall not be less than 150mm.
M&L for salt glazed stone ware drain pipe 200mm grade 'A' laid in trenches and jointed in CM (1:1) complete all as specified and directed.
M&L for Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
Demolition of Concrete of any description and in any position not otherwise specifically provided for Cement concrete (reinforced) complete all as specified and directed.
M&L for precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in manhole cover slab with plain fair faces and set in cement mortar (1:4) and surface embosed the date of casting of slab complete all as specified and directed.
M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Construction of soakage wells of size 2.4M dia x 3.0M deep including excavation in any type of soil complete all as specified and shown on drawings. Note :- (i) Effective depth should be measured from inlet of pipe. (ii) HQ CEJZ Drawing No TD/2004/S-35 Sheet 1/1.)
Taking down surface / concealed copper / aluminium point wiring (light,bell,fan,socket or power) complete, including fixtures and fittings such as switches,ceiling roses,lamp holders,pendants,sockets, regulators,tubelight fittings etc and making good disturbed surfaces with plaster on walls, floors etc completeall as specified and directed.
M&L for point wiring complete with 1.5sqmm single core FRLS ISI marked PVC insulated cable with multi stranded copper conductor in and including PVC conduit 20mm dia and thickness not less than 1.5mm, ISI marked with all accessories for concealed conduit as directed at site including chase cutting for one light/fan point controlled by one switch including MS sheet sunken box concealed in wall duly painted inside with one coat of red oxide primer and two coats of black bituminous paint in out side with 3mm thick Polycarbonate based sheet cover for fixing switches, sockets, regulators etc. alongwith 1.5 sqmm multi stranded FRLS, PVC insulated copper cable as continuous earth connected to comman earth and earth dolly including making good the disturbed surfaces complete all as specified and directed.
M&L for point wiring with 4.0 sqmm PVC insulated, unsheathed FRLS multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick Polycarbonate based sheet cover for mounting switches, socket etc including 4.0 Sqmm FRLS multistrand copper conductor cable as continuous earth wire connected to comen earth and earth dolly including making good the disturbed surfacescomplete for one socket 20 Amp socket outlet controlled by one switch on independent board.
All as per item No 96.00 (here-in-before) but for one 3 pin socket outlet 5 Amps point controlled by one switch on independent board.
All as per item No 96.00 (here-in-before) but for one 3 pin socket outlet 5 Amps point controlled by one switch on the same board with other switches.
M&L for point wiring with 2.5 sqmm PVC insulated, unsheathed FRLS multistrand copper conductor cable 1100 votls grade drawn into and including rigid non metallic PVC concealed conduit medium grade not less than 20 mm dia and 1.75mm thick ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes modular type suitable for fixing of modular face plate, plate cover for mounting modular switches, sockets, fan regulaters etc incl 2.5 Sqmm FRLS multistrand copper conductor cable as continuous earth wire complete for one socket 16 Amp socket outlet controlled by one switch on independent board.
S&F socket out let ,6 pin 5 and 16 Amps multi purpose 2 in 01 flush type 230 volt complete all as specified and directed.
S&F socket 5 Amps 5 pin flush type , 230 volts complete all as specified and directed.
S&F switch piano flush button single pole, one way 5 Amp 240 Volt complete all as specified and directed.
S&F switch piano flush button single pole, one way 15 Amp 230 Volt complete all as specified and directed.
S&F ceiling rose 65 x 50 mm three terminal, polycorbonate body complete all as specified and directed.
S&F angle/battan holder polycarbonate type body suitable for batten fitting complete all as specified and directed.
S&F LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500k colour temp complete all as specified and directed.
S&F 10W integrated LED bulk head luminaire environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head with LED light, complete all as specified and directed.
S&F 10W decorative LED mirror light environment friendly, ultra modern, energy saving, surface mounted decorative with LED light, complete all as specified and directed.
S&F surface and wall mounted 20 watt LED batten, PVC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.
Supply and fixing Exhaust fan metallic body of size 300 mm sweep, 50 Hz, AC 240Volt, 900 RPM, dynamically balanced impellers for smooth & vibration free operation, pre-lubricated double ball bearing for maintenance free running with aerodynamically designed & balanced blade, air delivery 1275 Cum/hr, noise level 40dB- 45dB and power consumption (50 W±10%) heavy duty single phase supply including mild steel louvers all as specified and directed.
Supply and fixing Geyser 25 ltr capacity in 5 Star rating, digital display, feather touch panel, shock safe plug, incoloy glass coated element, feroglass technology, PUF insulation 0.8 Mpa high working pressure, Whirlflow technology, IPX-4 protection suitable for, 50 Hz, AC 240Volt, single phase supply, white blue with overall length approx 620 mm with wall mounting accessories & 02 Nos flexible pipe connections all as specified and directed.
S&F chromium plated stop cock / angle valve cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe 15mm bore complete all as specified and directed.
S&F bib cock 15mm dia cast copper alloy fancy type with crutch of butterfly handle screwed down for iron pipe complete all as specified and directed.
M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked 25mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable as earth conductor including taking down old unsv submain wiring complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length.
S&F MCB SP 240 volts, 06-32 Amps 10KA, 'C' Series complete all as specified and directed.
S&F MCB SPN 240 volts, 32 Amps, 10KA, 'C' Series complete all as specified and directed.
S&F in replacement sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with min 100 amp rating bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
S&F in repair building security light of 30 Watt New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver including housing suitable brackets, nuts & bolts and GI pipe complete all as specified and directed. .
S&F in replacement sheet metal enclosure Single pole & neutral with 2 pin and earth plug capacity and socket 20A 240 Volt complete with one single pole MCB of 20 A complete all as specified and directed.
M&L for Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and testing on completion. Note: (i) Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc. complete all as specified and directed.
Deepak Saxena
JWALA ELECTRIC CONTRACTORS
Shiva Traders
M/s Hoti Lal Contractor
VANI CONSTRUCTION
M/S PREETI CONSTRUCTION
SHREE RADHIKA CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .