Repair Renovation Works at RMV Quarters and Nandini Layout Quarters at City Hired Accommodation, HAL Bangalore.

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Repair / Renovation Works at RMV Quarters and Nandini Layout Quarters at City Hired Accommodation, HAL [Bangalore]. CONTRACT NO. HAL/FMD/R-111/24-25

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

1 Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.50m in width or 10Sq m on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m, etc., all complete as directed by Engineer-in-Charge. 9.00 Cu m 239.15 Rupees Two Hundred Thirty Nine and Fifteen Paise Only 2152.35

2 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations, etc., in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and for all lift, etc., all complete as directed by Engineer-in-Charge. 7.00 Cu m 180.07 Rupees One Hundred Eighty and Seven Paise Only 1260.49

3 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-Charge, Nominal concrete 1:3:6 or richer mix, etc., all complete as directed by Engineer-in-Charge. 14.00 Cu m 2236.42 Rupees Two Thousand Two Hundred Thirty Six and Forty Two Paise Only 31309.88

4 Demolition of existing brick masonry built in cement mortar manually / by mechanically means including stacking serviceable materials within 50m lead, etc., all complete as directed by Engineer-in-Charge. 4.00 Cu m 1892.77 Rupees One Thousand Eight Hundred Ninety Two and Seventy Seven Paise Only 7571.08

5 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10mm to 25mm, etc., all complete as directed by Engineer-in-Charge. 200.00 Sq m 67.43 Rupees Sixty Seven and Forty Three Paise Only 13486.00

6 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge. 9.00 Cu m 3262.64 Rupees Three Thousand Two Hundred Sixty Two and Sixty Four Paise Only 29363.76

7 Hacking of CC flooring including cleaning for surface, etc., all complete as directed by Engineer-in-Charge. 100.00 Sq m 3.17 Rupees Three and Seventeen Paise Only 317.00

8 Disposal of moorum / building rubbish / malba / similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10Km for all lifts, etc., all complete as per directions of Engineer-in-Charge. Note - item to be applicable in urban areas having directions for restricted hours for movement / plying of load carrying motor vehicle of 3.50Cu m or more, etc., all complete as directed by Engineer-in-Charge. 29.00 Cu m 453.94 Rupees Four Hundred Fifty Three and Ninety Four Paise Only 13164.26

9 Providing 40mm thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps, etc., all complete as directed by Engineer-in-Charge. 190.00 Sq m 564.28 Rupees Five Hundred Sixty Four and Twenty Eight Paise Only 107213.20

10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement: 2 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) with fair finish, etc., all complete as directed by Engineer-in-Charge. 8.00 Cu m 7238.20 Rupees Seven Thousand Two Hundred Thirty Eight and Twenty Paise Only 57905.60

11 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1%:3 (1 cement : 1% coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources), etc., all complete as directed by Engineer-in-Charge. 11.50 Cu m 9515.78 Rupees Nine Thousand Five Hundred Fifteen and Seventy Eight Paise Only 109431.47

12 Centering and shuttering including strutting, propping, etc., and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps, etc., all complete as directed by Engineer-in-Charge. 150.00 Sq m 774.03 Rupees Seven Hundred Seventy Four and Three Paise Only 116104.50

13 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 15.00 Cu m 2687.14 Rupees Two Thousand Six Hundred Eighty Seven and Fourteen Paise Only 40307.10

14 Cement mortar (1:4) plastering 12mm thick for brick/concrete surfaces, finished smooth with trowel including lime rendering for interior faces of walls surfaces including scaffolding, curing etc., all complete as directed by Engineer-in-Charge. 250.00 Sq m 318.84 Rupees Three Hundred Eighteen and Eighty Four Paise Only 79710.00

15 Cement mortar (1:6) plastering 20mm thick for brick / concrete surfaces, finished smooth with trowel including lime rendering for interior faces of walls surfaces including scaffolding, curing etc., all complete as directed by Engineer-in-Charge. 150.00 Sq m 413.43 Rupees Four Hundred Thirteen and Forty Three Paise Only 62014.50

16 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, etc., all complete as directed by Engineer-in-Charge. 100.00 Sq m 50.21 Rupees Fifty and Twenty One Paise Only 5021.00

17 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches, etc., all complete as directed by Engineer-in-Charge. 1000.00 Sq m 18.14 Rupees Eighteen and Fourteen Paise Only 18140.00

18 Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, etc., all complete as directed by Engineer-in-Charge. 300.00 Sq m 143.37 Rupees One Hundred Forty Three and Thirty Seven Paise Only 43011.00

19 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr / 10 Sq m) over existing cement paint surface, etc., all complete as directed by Engineer-in-Charge. 2000.00 Sq m 120.63 Rupees One Hundred Twenty and Sixty Three Paise Only 241260.00

20 Providing TWO Coats Wall painting for Old work with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams / litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, etc., all complete as directed by Engineer-in-Charge. 1800.00 Sq m 131.19 Rupees One Hundred Thirty One and Nineteen Paise Only 236142.00

21 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams / litre, etc., all complete as directed by Engineer-in-Charge. 1000.00 Sq m 64.63 Rupees Sixty Four and Sixty Three Paise Only 64630.00

22 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, etc., all complete as directed by Engineer-in-Charge. 200.00 Sq m 207.86 Rupees Two Hundred Seven and Eighty Six Paise Only 41572.00

23 Brick work with common burnt clay machine moulded perforated modular bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand), etc., all complete as directed by Engineer-in-Charge. 7.00 Cu m 8215.59 Rupees Eight Thousand Two Hundred Fifteen and Fifty Nine Paise Only 57509.13

24 Providing and fixing up to floor five level precast cement concrete 200mm / 100mm thick wall or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources), etc., all complete as directed by Engineer-in-Charge. 14.00 Cu m 9283.85 Rupees Nine Thousand Two Hundred Eighty Three and Eighty Five Paise Only 129973.90

25 Taking out existing wooden door shutter, repair by cutting, painting, etc., and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, etc., all complete as directed by Engineer-in-Charge. 19.00 Nos 394.23 Rupees Three Hundred Ninety Four and Twenty Three Paise Only 7490.37

26 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts, etc., complete and stacking within 50 metres lead of area less than 3Sq metres and below, including stacking material and handing over the useful materials to HAL maintenance department and disconnecting the service lines if any, etc., all complete as directed by Engineer-in-Charge. 8.00 Nos 337.35 Rupees Three Hundred Thirty Seven and Thirty Five Paise Only 2698.80

27 Supplying and fixing of ISI marked flush door shutters conforming to IS: 2202 ( PArt 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercail 3 ply veneering with vertical grains on cross bands and face veneers on both faces of shutters using 30mm thick including ISI marked stainless steel butt shinges with necessary screws, etc., all complete as directed by Engineer-in-Charge. 4.00 Sq m 3335.26 Rupees Three Thousand Three Hundred Thirty Five and Twenty Six Paise Only 13341.04

28 Providing Sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), etc., all complete as directed by Engineer-in-Charge. 0.17 Cu m 107050.58 Rupees One Lakh Seven Thousand Fifty and Fifty Eight Paise Only 18369.88

29 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door / window / Clerestory windows & other Frames / Chowkhat of approximate size [50 x 100]mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/Cu m, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardant and fixed in position with M.S hold fast / lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast / lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door / window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, etc., all complete as directed by Engineer-in-Charge. 22.64 R m 870.68 Rupees Eight Hundred Seventy and Sixty Eight Paise Only 19712.20

30 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) 30mm thick solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kgs/Cu m and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, etc., all complete as directed by Engineer-in-Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 5.32 Sq m 3993.43 Rupees Three Thousand Nine Hundred Ninety Three and Forty Three Paise Only 21245.05

31 Providing and fixing ISI marked aluminium butt hinges of size [75 x 63 x 3.20]mm anodised (anodic coating not less than grade AC 10 as per IS 1868) transparant or dyed to required colour or shade with necessary screws, etc., all complete as directed by Engineer-in-Charge. 33.00 Nos 74.87 Rupees Seventy Four and Eighty Seven Paise Only 2470.71

32 Providing and fixing ISI marked [300 x 16]mm oxidised M.S. sliding door bolts with nuts and screws (Copper oxidised as per IS 1378), etc., all complete as directed by Engineer-in-Charge. 6.00 Nos 198.95 Rupees One Hundred Ninety Eight and Ninety Five Paise Only 1193.70

33 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws, etc., all complete as directed by Engineer-in-Charge.

a) [200 x 10]mm 12.00 Nos 91.59 Rupees Ninety One and Fifty Nine Paise Only 1099.08

b) [100 x 10]mm 8.00 Nos 59.44 Rupees Fifty Nine and Forty Four Paise Only 475.52

34 Providing and fixing bright finished brass 100mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws, etc., all complete as directed by Engineer-in-Charge. 3.00 Nos 667.55 Rupees Six Hundred Sixty Seven and Fifty Five Paise Only 2002.65

35 Providing and fixing aluminium sliding door bolts(aldrop) of [250 x 16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc., all complete as directed by Engineer-in-Charge. 5.00 Nos 239.42 Rupees Two Hundred Thirty Nine and Forty Two Paise Only 1197.10

36 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, etc., all complete as directed by Engineer-in-Charge.

a) 125mm 8.00 Nos 60.86 Rupees Sixty and Eighty Six Paise Only 486.88

b) 100mm 8.00 Nos 54.71 Rupees Fifty Four and Seventy One Paise Only 437.68

37 Providing and fixing Float glass panes 4mm thick glass pane (weight not less than 10kg/Sq m), etc., all complete as directed by Engineer-in-Charge. 5.00 Sq m 2059.61 Rupees Two Thousand Fifty Nine and Sixty One Paise Only 10298.05

38 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.40mm in both directions with wire of dia. 0.50mmwith 12 mm mild steel U beading, etc., all complete as directed by Engineer-in-Charge. 20.00 Sq m 1128.20 Rupees One Thousand One Hundred Twenty Eight and Twenty Paise Only 22564.00

39 S&F stainless steel A ISI 304 (18/8) Kitchen sink without drain board of size (610x510mm) bowl depth 200mm, etc., all complete as directed by Engineer-in-Charge. 4.00 Nos 4539.26 Rupees Four Thousand Five Hundred Thirty Nine and Twenty Six Paise Only 18157.04

40 Providing and laying Polished Granite stone slab of all colour and texture except Black, Cherry / Ruby Red stone flooring / Steps / Cladding required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings including Nozing the exposed edges with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing including threading lines, etc., all complete as directed by Engineer-in-Charge. 65.00 Sq m 2821.46 Rupees Two Thousand Eight Hundred Twenty One and Forty Six Paise Only 183394.90

41 Providing and fixing 18mm thick Granite stone slab of colour black, Cherry / Ruby red Area of slab over 0.50Sq m gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish, etc., complete at all levels, etc., all complete as directed by Engineer-in-Charge. 32.00 Sq m 4718.87 Rupees Four Thousand Seven Hundred Eighteen and Eighty Seven Paise Only 151003.84

42 Providing and laying Double charged Vitrified tiles of size [600 X 600]mm in floor (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade / double charged / ultra charged polished, with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness including grouting the joints with white cement and matching pigments, etc., The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, etc., all complete as directed by Engineer-in-Charge. 450.00 Sq m 1246.53 Rupees One Thousand Two Hundred Forty Six and Fifty Three Paise Only 560938.50

43 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with antiskid finish of size [600 x 600]mm water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. including grouting the joints with white cement and matching pigments, etc., The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, etc., all complete as directed by Engineer-in-Charge. 150.00 Sq m 1256.82 Rupees One Thousand Two Hundred Fifty Six and Eighty Two Paise Only 188523.00

44 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kg per Sq m, including pointing in white cement mixed with pigment of matching shade, etc., all complete as directed by Engineer-in-Charge. 270.00 Sq m 1164.90 Rupees One Thousand One Hundred Sixty Four and Ninety Paise Only 314523.00

45 Supplying and fixing Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more. for R.C.C. work ready to use “cut and bend” rebars of approved make from factory / workshop to construction site including placing in position and binding all complete upto plinth level and above plinth level, etc., all complete as directed by Engineer-in-Charge. 750.00 Kgs 91.55 Rupees Ninety One and Fifty Five Paise Only 68662.50

46 Supplying, fabricating and fixing Steel work in built up tubular Hot finished welded type tubes (round, square or rectangular hollow tubes, etc.,) trusses, etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers, etc., all complete as directed by Engineer-in-Charge. 700.00 Kgs 178.60 Rupees One Hundred Seventy Eight and Sixty Paise Only 125020.00

47 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls, etc., all complete as directed by Engineer-in-Charge.

a) 20mm dia 30.00 R m 493.91 Rupees Four Hundred Ninety Three and Ninety One Paise Only 14817.30

b) 25mm dia 30.00 R m 576.27 Rupees Five Hundred Seventy Six and Twenty Seven Paise Only 17288.10

48 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Sq m by the same membrane manufacture of density at 25°C, 0.87-0.89 kg / litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane, etc., all complete as directed by Engineer-in-Charge. Note: A performance guarantee bond for 5 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. 100.00 Sq m 515.36 Rupees Five Hundred Fifteen and Thirty Six Paise Only 51536.00

49 Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification, etc., all complete as directed by Engineer-in-Charge. 24.00 Per 50Kg Bag 16.67 Rupees Sixteen and Sixty Seven Paise Only 400.08

50 Providing and fixing 15mm dia C.P. brass bib cock of approved quality conforming to IS:8931, etc., all complete as directed by Engineer-in-Charge. 7.00 Nos 465.61 Rupees Four Hundred Sixty Five and Sixty One Paise Only 3259.27

51 Providing and fixing 15mm dia C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms, etc., all complete as directed by Engineer-in-Charge. 4.00 Nos 754.00 Rupees Seven Hundred Fifty Four Only 3016.00

52 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba, etc., all complete as directed by Engineer-in-Charge. 3.00 Nos 123.20 Rupees One Hundred Twenty Three and Twenty Paise Only 369.60

53 Providing and fixing White vitreous China wash basin size [630 x 450]mm with CI Brackets, with Single 15mm CP brass pillar taps, 32mm CP brass waste of std. Pattern including painting of fittings and brackets, cutting and making good the walls wherever required, etc., all complete as directed by Engineer-in-Charge. 3.00 Nos 2045.41 Rupees Two Thousand Forty Five and Forty One Paise Only 6136.23

54 Supplying and fixing Flushing Cistern PVC 10 ltrs. Capacity low level white colour with all fittings, fixtures and flush pipe, etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 2061.40 Rupees Two Thousand Sixty One and Forty Paise Only 4122.80

55 Providing and fixing white vitreous china pedestal type water closet (European type) with ISI Marked White solid plastic seat and lid and 10 litres low level white vitreous china flushing cistern and CP Flush bend with fittings & CI brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved muncipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required, etc., all complete as directed by Engineer-in-Charge. 3.00 Nos 7355.89 Rupees Seven Thousand Three Hundred Fifty Five and Eighty Nine Paise Only 22067.67

56 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete -White solid plastic seat with lid, etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 629.19 Rupees Six Hundred Twenty Nine and Nineteen Paise Only 1258.38

57 Providing and fixing 8mm dia CP / SS Jet with flexible tube upto 1mt. Long SS triangular plate to EWC of quality make, etc., all complete as directed by Engineer-in-Charge. 3.00 Nos 320.77 Rupees Three Hundred Twenty and Seventy Seven Paise Only 962.31

58 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes, etc., all complete as directed by Engineer-in-Charge.

a) 75mm dia 18.00 R m 228.58 Rupees Two Hundred Twenty Eight and Fifty Eight Paise Only 4114.44

b) 110mm dia 36.00 R m 346.73 Rupees Three Hundred Forty Six and Seventy Three Paise Only 12482.28

59 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, etc., all complete as directed by Engineer-in-Charge.

a) 75mm dia -Bend 87.5 6.00 Nos 97.29 Rupees Ninety Seven and Twenty Nine Paise Only 583.74

b) 110mm dia -Bend 87.5 12.00 Nos 138.13 Rupees One Hundred Thirty Eight and Thirteen Paise Only 1657.56

c) 75mm dia -Shoe 6.00 Nos 85.53 Rupees Eighty Five and Fifty Three Paise Only 513.18

d) 110mm dia -Shoe 12.00 Nos 121.13 Rupees One Hundred Twenty One and Thirteen Paise Only 1453.56

60 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of [50 x 50 x 50]mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall, etc., all complete as directed by Engineer-in-Charge.

a) 75mm 10.00 Nos 339.79 Rupees Three Hundred Thirty Nine and Seventy Nine Paise Only 3397.90

b) 110 mm 10.00 Nos 341.12 Rupees Three Hundred Forty One and Twelve Paise Only 3411.20

61 Providing and fixing 100mm nominal dia circular type PTMT grating of approved quality and colour, etc., all complete as directed by Engineer-in-Charge. 4.00 Nos 34.54 Rupees Thirty Four and Fifty Four Paise Only 138.16

62 Providing and fixing 150mm C.P. brass shower rose with 15 or 20mm inlet, etc., all complete as directed by Engineer-in-Charge. 1.00 No 204.28 Rupees Two Hundred Four and Twenty Eight Paise Only 204.28

63 Providing and fixing [600 x 450]mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 1477.27 Rupees One Thousand Four Hundred Seventy Seven and Twenty Seven Paise Only 2954.54

64 Dismantling 15 to 40mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead), etc., all complete as directed by Engineer-in-Charge. 80.00 R m 2.99 Rupees Two and Ninety Nine Paise Only 239.20

65 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall, etc., all complete as directed by Engineer-in-Charge.

a) 15mm nominal bore 40.00 R m 533.28 Rupees Five Hundred Thirty Three and Twenty Eight Paise Only 21331.20

b) 20mm nominal bore 40.00 R m 583.58 Rupees Five Hundred Eighty Three and Fifty Eight Paise Only 23343.20

66 Providing and laying 150 mm dia non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints, etc., all complete as directed by Engineer-in-Charge. 100.00 R m 511.23 Rupees Five Hundred Eleven and Twenty Three Paise Only 51123.00

67 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size [90 x 80]cm and 45cm deep including C.I. cover with frame (light duty) [455 x 610]mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With With Sewer bricks conforming to IS : 4885, etc., all complete as directed by Engineer-in-Charge. 3.00 Nos 11678.70 Rupees Eleven Thousand Six Hundred Seventy Eight and Seventy Paise Only 35036.10

68 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain, etc., complete : For pipes 100 to 250mm diameter, etc., all complete as directed by Engineer-in-Charge. 4.00 Nos 744.58 Rupees Seven Hundred Forty Four and Fifty Eight Paise Only 2978.32

69 Cutting of tree roots including digging out earth cutting roots upto 500mm girth and taking out etc., (length of root upto 1mtr), etc., all complete as directed by Engineer-in-Charge. 3.00 Nos 338.98 Rupees Three Hundred Thirty Eight and Ninety Eight Paise Only 1016.94

Sub-Total (Excluding GST) Rupees Thirty Five Lakh Thirty Five Thousand Eighty Eight and Twenty Four Paise Only 3535088.24

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 3535088.24 BELOW % 3535088.24

Add 18% GST Rupees Six Lakh Thirty Six Thousand Three Hundred Fifteen and Eighty Eight Paise Only 636315.88

Grand Total (Including GST) Rupees Forty One Lakh Seventy One Thousand Four Hundred Four and Twelve Paise Only 4171404.13

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/R-111/24-25

Name of Work: Repair / Renovation Works at RMV Quarters and Nandini Layout Quarters at City Hired Accommodation, HAL [Bangalore].

Estimated Amount in Rs.: 4170000

Tender Notice Date : 10.12.2024

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company

2 Type of ownership PlsEnter Type of Ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution

4 Address for correspondence: Pls Enter Address

5 (a) PAN No.: Pls Enter Pan NO

5 (b) Service Tax Registration No

5 (c ) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code 3 #N/A

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

8 I.T Returns for past 03 years 999999 5 J 6

2024-25 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7

9 Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3

YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2

2023- 2024 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2

Average annual Financial turn over 0.00 1251000.00

Avg Annual Turnover criteria is not met 10000000 1

10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed

ESI Registration No/. with proof if any Remarks if any

PF Registration No. with proof if any

11 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal

Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000

Date of Issue 200000 40000

Value in Rs. 200001 150000

Solvency value is NOT as per NIT

13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 1668000 500001 250000

Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000

Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Brief Description of Work: Please enter Details for Work No 1 2000000 500000

Completed value of Work in Rs. 2000001 1000000

Date of Commencement of Work 4000000 1000000

Date of Actual Completion of Work: 4000001 2000000

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Brief Description of Work: Pls Enter Details for Work No II

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work: work done

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555

Brief Description of Work: Pls Enter Details for Work No III #REF!

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

14 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Mobile No. Pls Enter Details for Person holding Power of Attorney

Ph. No. with STD code

FAX No. with STD code

15 DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

16 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II