REPAIR TO RUNWAY TAXI TRACK AND HELIPAD INCLUDING MAINT OF SHOULDER AND SIDE DRAIN AND ALLIED INFRA AT MANASBAL UNDER GE 970 EWS

Amount

M&L for preparing bituminous surfaces of road and marking paint of approved colour confirming to BS 3262-1989 pattern of specified broken/ continous strip 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like of any width on top surfaces of runway including cleaning/ removing of existing paint strip from the runway surface, make free from dust & moisture and putting in glass beads of standard size by special applicator machine complete and applied hot upto 200 to 220 degree centigrade temperature with special applicator machine, complete all as specified and directed.

M&L in repair 20mm thick (thickness of concrete slab 200mm) expansion joints, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade ‘A’ after cleaning and removing oil filled bitumen, complete all as specified and directed.

M&L for granite (of any type) tiles 20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 15mm thick screed bed or bedding layer in cement mortor 1:6 as in floor, complete all as specified and directed.

All as per Srl item No. 3.00 above but as on vertical surfaces such as skirting, dados, risers etc., fixed over and including 10mm thick plaster in cement mortor 1:4 and including taking down existing plaster of any type, complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position, complete all as specified and directed.

M&L for second class hard wood, clean sawn, fixed as in scantling or framed work, complete all as specified and directed.

M&L for second class soft wood, plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exceding 3.0 Sqcm but not exceding 6.0 Sqcm, complete all as specified and directed.

S&F 12mm thick veneered decorative plywood, Grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work, complete all as specified and directed.

S&F 4mm thick plywood (03 Nos of ply), grade BWP, type BB fixed with screws to timber frame work, complete all as specified and directed.

S&F anodised aluminium snap grid frame work, size of grid 605x605mm for false ceiling, complete all as specified and directed.

S&F 4mm thick decorative coloured non asbestos fibre cement building boards, fixed or laid/ inserted to timber/ GI/ aluminium framework with screws in any position flat or slop and fixed in jointless finish with jointing compound and jointing tape as per manufacturer's instructions, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) as in ground floors and pavings not exc 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge not exc. 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 100mm thick plain cement concrete 1:3:6, type C-1 (using 40mm graded crushed stone aggregate) as in sub base, finished the surface to receive base, complete all as specified and directed.

M&L for 40mm thick plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floor finish, complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles/ edges and throating, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling in and mass concrete, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and directed.

M&L for machine pressed precast coloured cement concrete interlocking paver blocks of any shape and size, confirming of IS-15658 : 2006 of 60mm thick M-35 Grade, laid over and including 50mm thick sand cushioning and jointed with grey cement and pigment, complete all as specified and directed.

M&L for cement concrete work in pavement/ hardstanding of flexural strength 40 Kg/ Sqcm in field using 400 Kg of cement per Cum, thickness of concrete 25cm or less and using necessary formwork as required, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof coverings, cladding to walls etc, fixed with self tapping screws, upto 10 mtr height in hanger, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof coverings, ridges, hips, cladding to walls, fixed with self tapping screws, complete all as specifed and directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers as in roofs, walls etc. with grade of zinc coating 275, complete all as specifed and directed.

S&F 0.80mm thick plain, galvanised, mild steel sheeting as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

M&L for preparation of old steel surfaces of CGI / PGI sheet roofing, gates and other similar works, exc 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of new steel surfaces of CGI / PGI sheet roofing, gates and other similar works, exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F 1.0mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required, complete all as specified and directed.

S&F bird proofing net (fishing net of PVC/ Nylon) of superior quality of wire mesh of size not exc 25x25mm including stiching of ends longtudinal/ transverse sides and for PVC rope holding with cotton clothes at both faces of net PVC/Nylon rope to be fixed at both end faces of steel portal, complete all as specified and directed.

S&F PVC/ Nylon wire rope exc 12mm dia of superior quality, fixed/ stich with bird proofing net and ends to be fixed at corners of portal/ purlins of wall cladding, complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and directed.

Dismantling of fencing wire mesh of any type and size, complete all as specified and directed.

M&L for mild steel framed work as in angle iron posts/ struts in fencing and bird proofing net including cutting tops to shape as directed, drilling holes, notching for wire etc, cutting and twisting, necessary drilling, bolting and riveting or welding including flat iron straps for securing post, chain link fencing etc., confirming to Fe-290 Grade-165, complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 5cm, dia of neck 11 to 15mm, complete all as specified and directed.

Supply only chain link MS galvanised fencing, made out of 4mm dia of galvanised iron wire of mesh 50x50mm in size, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed.

S&F mild steel round bars for Ge-410-W (Gde E-250) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete, drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, confirming to Fe-410-W Grade E-250, quality 'A', complete all as specified and directed.

S&F 375mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed.

M&L for preparation of old wooden surfaces or articles of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of new wooden surfaces or articles of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F in replacement 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed on wall with MS suitable clamps, complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 Mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster on any surfaces etc, including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.

Notes :- An amount of Rs. 64,125.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

Kesar Impex

rafiq trading co

M/S LUCKY BUILDERS