REPAIR, MAINT /REPLACEMENT OF STREET LIGHTS/ SECURITY LIGHTS, HIGH MAST LIGHTS, FLOOD LIGHTS, POST TOP LANTERN, REPAIR AND MAINT OF LIGHTENING CONDUCTOR AND ALLIED CONNECTED WORKS AT JINDRAH UNDER GE(ARMY) DHAR ROAD

Amount

Labour only for taking down and lifting up high mast light fitting including replacing the unserviceable items to make the fitting serviceable ,serving, greasing of steel reopened adjust/repair the timer, supply and fixing in replacement the contacts lifting mechanism with all accessories as required, complete all as directed by the Engineer-in-Charge. (Note :- Spares like driver, LED Panel & LED fitting will be measured and paid separately)

Dismantling and taking down the existing defective street light/security light/Post top Lantern fitting of any type and any capacity fixed at any height Complete all as directed by Engr-in-Charge.

Supply,fixing, connecting, testing and commissioning LED Street light fitting 90 Watt, 240 watt, 0.42 Amps, PF> 0.95, colour Temp 5700K new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver. Make Crompton , Havells , wipro or its equivalent in Phillips as approved by GE.

Supply,fixing, connecting, testing and commissioning LED street light fittings 70 Watt ,240 VOLT, current 0.31 Amps, 5700 Temp, new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver. Make Crompton , Havells , wipro or its equivalent in Phillips as approved by GE.

Supply,fixing, connecting, testing and commissioning LED flood light fittings 120 watt ,240 volt, 0.57 Amp current, > 0.95 PF, 5700 K Temp ,new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver. Make Crompton , Havells , wipro or its equivalent in Phillips as approved by GE.

S&F Post top energy saving , environmental friendly, aesthetically designed with indirect symmetrical light distribution die-cast aluminium IP-65 luminaire with high power COB LED as light source of capacity 40/35 Watt, 6500K all as specified and directed. Make Crompton , Havells , wipro or its equivalent in Phillips as approved by GE.

S&F Post top energy saving , environmental friendly, aesthetically designed with indirect symmetrical light distribution die-cast aluminium IP-65 luminaire with high power COB LED as light source of capacity 20 Watt, 6500K all as specified and directed. Make Crompton , Havells , wipro or its equivalent in Phillips as approved by GE.

Note for item 3 to 7 : (i) A certificate of Gurrantee shall be submitted by the contractor for period 3 (three) years from the certified date of completion of work as a whole for repair/replacement of lamp & light fittings to GE. Performance guarantee amount @ 5% of quoted amount of LED lamps & light fitting shall be kept reserved for a period of three years. Atlernatively after completion of work contractror may furnished guarantee amount in the shape of FDR/BGB pleased in favour of GE. (ii) Luminarie shall be provided with all parameters mentioned above.

Supply and install 10 W bollard decorative luminaire IP 65 rated inverted Pyramid type LED bollard with soft 360 deg light distribution including fixing arrangement installaed in PCC foundation and taking down old unserviceavle all as specified and directed Make+E17Crompton / Philips / Bajaj / Osram

Supply and fixing street light junction box of suitable size for single phase and neutral incl earth link cable connection outdoor type, weather proof, factory made out of PVC sheet 1.8 mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and out going cable/wire complete comprising with the followings :- (a) Bus bar with two numbers aluminium strips, 100 Amps capacity insulated with insulators, including colour coding strip, including PVC cable of suitable size from bus bar to MCB (b) MCB SPN 6 to 32 Amps - 01 No (c) Clamps made out of 40mm x 5mm flat iron duly welded with nuts & bolts complete all as specified and directed including taking down old unserviceable . Make : Sintex/Hansel/Hager /HPL

Supply and fixing Street light fitting electronic constant current drivers/PCB/electronic gear suitable for 40 to 60 Watt LED flood light/street light fitting as required at site or as per sample incl taking out old unserviceable all as specified and directed . Make - Crompton /Philips /Havells

Supply and fixing Street light fitting electronic constant current drivers/PCB/electronic gear suitable for 70 to 90 Watt LED flood light/street light fitting as required at site or as per sample incl taking out old unserviceable all as specified and directed . Make - Crompton /Philips /Havells

Supply and fixing Street / flood light fitting electronic constant current drivers/PCB/electronic gear suitable for 120 to 150 Watt LED flood light/street light fitting as required at site or as per sample incl taking out old unserviceable all as specified and directed . Make - Crompton /Philips /Havells

GI bracket 1.5 mtr long made out of 40mm bore light grade, GI pipe, bend to shape as required complete with two Nos MS clamps fabricated out of MS flat of size 40 x 5 mm, nuts and bolts duly painted with two coats of aluminium paint of superior quality over a coat of red oxide primer, to be fixed on pole/on roof of building including taking down old brackets complete all as specified and directed by the Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in deep getting out in hard/dense soil for stay assembly/laying of cable/errection of poles etc complete all as specified and directed.

Excavation in trenches n exceeding 1.5m wide and exceeding 1.5 m deep and getting out in Soft/loose soil including forming bottom surface to requirted level for laying pipes complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose

M&L for well burnt brick sub class B old size laying in trenches perpenducular to axis of the cable complete all as specified and directed.

Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 40 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.

Taking down old unserviceable 40mm dia light grade pipe

Taking out existing worn out/old PVC insulated cable in 4/2 core of 50 sqmm to 6 Sqmm size of 1100 Volt grade in pieces from trenches making loop for transportation and removal from site after taking proper shut down from MES compitent staff complete in all respect and as directed at site.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wal or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 35 Sqmm 3.5 core with required aluminium cable lugs all as specified and directed. Make of Cable : Havells, Polycab, Gloster,Finolex

-- do-- as per item no. 23 above but size 50 sq mm 3.5 core

-- do-- as per item no. 23 above but size 25 sq mm 4 core

-- do-- as per item no. 23 above but size 16 sq mm 4 core

-- do-- as per item no. 23 above but size 6 sq mm 2 core

-- do-- as per item no. 23 above but size 10 sq mm 2 core

Supply and laying or fixing or passing through pipe from junction box to street light connection, 1100 volts grade heavy duty cable with PVC solid insulated aluminium conductor served with an inner sheathing PVC tape and over all PVC sheathed 10 Sqmm 2 core (TC) nominal cross section.Make : FINOLEX/UNIVERAL CABLE/KEI /plaza/polycab

Supply and laying or fixing or passing through pipe from junction box to street light connection, 1100 volts grade heavy duty cable with PVC solid insulated aluminium conductor served with an inner sheathing PVC tape and over all PVC sheathed 6 Sqmm 2 core (TC) nominal cross section.Make : FINOLEX/UNIVERAL CABLE/KEI/plaza/polycab

Dimentling and taking down old/unsv cross arms, bracing, supports etc complete all as specified and directed.

S&F cross arms bracings supports clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paints complte all as specified and directed.

Dismantling old Unsv copping, foundation etc from pole, busbar,panel complete all as specified and directed.

PCC (1:4:8) type D-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and directed.

PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and directed.

PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole / reconstruction old damaged copings etc, including necessary form work complete all as specified and directed

M&L for cutting of PCC/Hard standing/WBM road not exceeding 20 cm in width not exceeding 30 cm in depth for passing of LT cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e bitumen/PCC (1:3:6) type C-1 complete all as specified and directed .

S&F sheet metal enclosure box made out of 3.15 mm thick CRCA sheet with powder coated paint (CPRI approved) double door outdoor type including solid aluminium bus bar of capacity 100 Amp 4 Nos strip with locking arrangements, enclosure box to be fixed on plinth foundation 1:2:4 and 150 mm above ground level including MS angle/ channel consisting of necessary fixing arrangements for incoming & out going cables with cable glands, lugs, nut, bolts, washers and fixing arrangement , PCC work including necessary flat iron clamps with nuts, bolts & washers and Powder coated all as specified and directed.

S&F MCCB 100 Amps 4 Pole, 16 KA, 415 V, 50 Hz adjustable type and connecting up in the existing panel location including taking out existing unserviceable MCCB complete all as specified and as directed by Engineer-in-Charge. Make : Legrand/Schenider (Electric)/L&T/Havells

S&F MCCB 160 Amps 4 Pole, 25 KA, 415 V, 50 Hz adjustable type and connecting up in the existing panel location including taking out existing unserviceable MCCB complete all as specified and as directed by Engineer-in-Charge. Make : Legrand/Schenider (Electric)/L&T/Havells

M &L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried in ground vertically to a depth not less than 2.25 mm below ground level with top edge of the earth plate not less than 1.5 mm below normal ground level, connected to GI strip 32 x 6 mm continuity conductor including 15 mm bore pipe light grade for protection of strip by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel connected to earth test point upto 7.5 mt away from earth electrode all as shown as per plate No 03 of SSR I including necessary earth work, PCC 1:3:6 type C 1 chamber, RCC cover slab of 50 mm thick 1::2:4 with 8 mm CTD 140 mm C/C with suitable handle,watering pipe 20 mm dia light grade pipe with funnel,. charcoal salt and testing on completion and including taking old unserviceable earthing with connected items all as specified and directed by Engr in charge including taking down old/unsv earthing.

S & F in replacement air termination single pointed aluminium rod 12 mm dia and 300 mm long fitted on exisiting lightening conductor tube 40 mm on buildings with F clamps nut bolts complete all as specified and directed.

S & F in replacement earth test point terminal block made out of gun metal or phorphorus bronze size 75 x 75 x 5 mm , drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw grouting on wall with PCC, nut bolts and washers, including making good to disturbed surface complete all as specified and directed.

S&F Galvanised iron strip 32 x 6 mm for extension of earth and connected to equipment or panel complete all as specified and as directed .

S & F aluminium strip 25 x 3.15 mm with saddle and fixing screws, gutties etc on wall and roof top conductors including grouting wooden gutties complete all as specified and directed.

Refixing GI tubing light grade 40 mm bore obtained from above item no 49 including grouting in PCC complete all as specified and directed for fixing leghtening arrester on roof top.

Taking out old handing GI strip/Aluminium (damaged by Monkey ) from roof and wall complete excluding straightening the strip and refixing in the same position with saddle fixing screws gutties etc on wall and roof op conductors including grouting wooden gutties complete all as specified and directed.

M & L for PCC (1:2:4 ) type B-2 in cement concrete in foundation, filling and mass concrete using 20 mm fraded stone for Lightning conductor complete all as specified and directed.

S & F GI tubing light grade 40 mm bore fixing in bricks/stone wall with 2 Nos sopporting clamp made of flat iron of size 25 x 4 mm including nut bolt and grouting bolt complete all as specified and directed for fixing lightening arrester on roof top.

S&F GI tubing light grade 40 mm bore fixing including grouting in PCC complete all as specified and directed for fixing lightening arrester on roof top.

Testing of earthing inside/outside depot area ( 1 ASD, 2ASD, ATA, E/M Installation, Quarter Guard) duly filling the respective register of earthing provided by JE E/M office Note- necessary tools and plants and earth tester to be provided by Contractor in deemed quoted rate.

M&L for constructing Earth pit of internal size not less than 300x300x150mm PCC 1:3:6 type C 1 chamber, RCC cover slab of 50 mm thick 1:2:4 with suitable handle.Dismantling old unsv one.

M&L for preparing scraping the old painted surfaces of GI Pipe light grade 40 mm fixed on wall/roof for lightening conductor and applying two coat of aluminium paint on GI Pipe light grade 40 mm approx 3 mtr long and bracket, clamp complete and all as specified and directed.

M&L for removing old paint from the LT panels/feeder box/pole by paint removers, cleaning by scrapping and preparing the surface and applying two coats Painting complete to LT panels/feeder box with synthetic enameled paint of existing colour over a coat of red oxide primer and writing work as written of existing ie feeder feeding location etc complete all as directed by Engr-in-Charge.

M&L for dismantling and taking down old u/s LT panel and Supply, Install Testing & Commissioning of self supporting Indoor type LT Panel Board of Adequate size , totally enclosed compartmentalised double door design, dust and vermin proof, suitable for 440 Volt 3 phase 4 wire system made out of 2mm thick CRCA sheet and built upon regid frame work having front doors with neoprence rubber gasket including danger plate, earthing strip point at side, ventilation louvers at the side, bottom detachable gland plate complete with suitable size nuts, bolts and washers etc. The pannel shall be powder coated and the power and control circuit diagram shall be accompany the eqpt and circuit wiring with colour code solid conductor copper cable for easy identification including incomming/outgoing cable holes at the bottom. The Panel shall be emmbeded with 50 x 6 mm MS channel and 30 cm above the normal ground level complete with PCC foundation (1:2:4 ) type B2 incl all connections of existing panel board with lugs complete all as specified and directed consist of following item. (Sub LT Panel)

Replacement of old unserviceable solar light fiting >140 Lum/watt MPPT charge, controller, tillable LED Panel Adjustable AIO mouting angle, Mono crystalline solar Panel PIR notion sensor 12 watt, 12.8 volt 12 Ah battery including pole foundation and al other connected items as per manufacturers direction all as specified and directed

Blank

Blank

Blank

Blank

Blank

Blank

Supply and errect steel tubular swaged poles complete with MS base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (09 metres long) conforming to IS 2713 including applying two coats of aluminium paint over a coat of red oxide zinc chrome primer over the exposed surface and applying two coats of black bituminous paint over the embeded portion of pole, errecting in truly vertical position complete all as specified and directed.

Supply and errect steel tubular swaged poles complete with MS base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-55 (11 metres long) conforming to IS 2713 including applying two coats of aluminium paint over a coat of red oxide zinc chrome primer over the exposed surface and applying two coats of black bituminous paint over the embeded portion of pole, errecting in truly vertical position complete all as specified and directed.

Blank

Blank

Blank

Blank

Blank

Blank

Blank

Blank

Blank

Supply and fixing in replacement of Automatic light Timer switch with Nature switch Cat No SWADEEP-02EC12KW3P, infra ray sensor with pre sawn switching off timer,4-8 hrs, of Maximum load capacity of 4KW per phase. Degree of protection conforms to IP 65 complete all as specified and directed.

Supply and making in replacement new LT 1100 Volt end termination with suitable size of aluminium lugs duly crimped for LT 3 ½ core armoured aluminium conductor cable after isolating supply to transformer/LT panel and disconnecting brunt/fault cable from the bunch of cables in trenches,alleries, removing cable loop, opening the cable blank and connecting back after end terminals, testing and commissioning for following sizes all as specified and as directed Note Excavation,Removal, Return filling in to be paid in deemed quoted rate.

95 Sqmm to 120 Sqmm

35 Sqmm to 70 Sqmm

6 Sqmm to 25 Sqmm

Blank

Taking out existing worn out/old PVC insulated cable in 3 core of 95 Sqmm to 120 sqmm size of 11000 Volt grade in pieces from trenches making loop for transportation and removal from site after taking proper shut down from MES compitent staff complete in all respect and as directed at site.

Supply & laying HT XLPE Insulated screened aluminium stranded conductor cable PVC bedded galvanized strip armoured heavy duty 11 KV cross sectional area 95 Sqmm 3 Core (Earthed)conforming to IS 7098 lead in duct/trenches complete all as specified and directed Make of Cable:Havells, Polycab, Gloster,Finolex

SUBASH CHANDER

DAVINDER SINGH

FANGALIA TRADERS

K S BUILDERS

MandeepConstructionCo