Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
16 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Development of WOW Panel
7836
2501_2199_E29515
Works
Mig Complex - Aircraft Manufacturing Divn - Nasik - Purchase Group1, Group2
₹0
Exempted
16 Jul 2024
6 Jun 2024
6 Jun 2024
16 Jul 2024
HINDUSTAN AERONAUTICS LIMITED
Aircraft Manufacturing Division, NASIK
OJHAR(MIG), NASIK-422 207, INDIA
NAME OF THE BIDDER
TENDER NO. 2501_2199_E29515
CONTACT PERSON AND CONTACT NO
Special Terms & Conditions
SL No MANDATORY REQUIREMENTS COMPLIANCE YES/NO
1 The tender is for indigenous design & development and supply of WOW Panel , P/N: 11F-07-ELE3-030-A, tester as per Technical Specification No. AURDC/ SPEC/HTT40/ DQ/ ELEC/009, Iss-Nil dated 21 March 2023 and as per Qualification Test document No.AURDC/ QTP/HTT40/DQ/ELEC/009, Issue- Nil. Following is the scope of this tender & to be followed by supplier after placement of order by HAL for prototype development :- a) Design & Development of required equipment as per Technical Specification No. AURDC/ SPEC/HTT40/ DQ/ ELEC/009, Iss-Nil dated 21 March 2023 (Note 1) and its amendments . b) Manufacture and supply of prototype (01 No.). c) Qualification testing on prototype as per Qualification Test document No.AURDC/ QTP/HTT40/DQ/ELEC/009, Issue- Nil (Note 1). d) Incorporation of modification, (if any), on prototype based on testing. e) Commissioning of prototype for testing at HAL (Bangalore). f) Conducting testing at HAL (Bangalore). g) Supply of technical documentations. h) Final acceptance of prototype by HAL. Inspection Agency- DGAQA(N) & HAL(QC). i) Obtaining Provisional Clearance (PC) certificate from DGAQA (Nasik) and freezing of drawings, technology , Bill of Materials (BOM). j) Acceptance Test Procedure (ATP) as per document No. QPID/HTT-40/PROV/01( Provisional) , Issue-Nil and its amendments, for Bulk supply of WOW Panel (if order for bulk supply is placed)
Note 1. The Technical Specifications No. AURDC/ SPEC/HTT40/ DQ/ ELEC/009, Iss-Nil dated 21 March 2023 and Qualification Test document No. AURDC/ QTP/HTT40/DQ/ELEC/009, Issue- Nil shall be finalised during the design reviews with certifying agencies after due deliberations on the points, mentioned in Technical Requirements / Qualification Test Plan, as reference or explicitly mentioned as " to be decided during the design reviews" . The decision of design review committee shall be final and shall be binding to the supplier to comply for the supply of the Prototype. Note 2: The required GSE: WOW Panel falls under category "Electrical Device for Military Aircraft application (Ground operation)". Development requires expertise in analog and digital design methodology for GSE of military application as per applicable MIL / JSS standards. The reliability aspects as per applicable MIL / JSS standards are to be ensured.
1.1 Bulk supply of approved product (qty : 17 Nos.) indicated for the future supply, against separate Purchase Order(s), to be placed only after due DGAQA Provisional Clearance (PC), as per HAL requirements based on availability of firm orders from HAL’s Customer(s). This supply shall be as per frozen drawings and BOM along with all deliverables. However, HAL reserves the right to place Purchase order for the Bulk Supply.
1.2 The bid will be evaluated on package basis on all items against Total Cost . (Prototype and bulk)
2 Following are deliverables by the supplier:- i) Prototype (01 No.) after satisfactory completion of Qualification Testing ii) Prototype is to be delivered with one set of spare parts, Qualifiation testing report, certificate / COC iii) Two sets of following documents shall be supplied with prototype to HAL, Nasik. All documents shall be printed on good quality paper and bound to withstand long usage a) Electrical schematic drawings b) Illustrated parts catalogue with recommended spares list along with supplier details c) Warranty Certificate d) Maintenance manual / user handbook containing all technical information including Periodical maintenance schedule and mandatory / non-mandatory spares list required in each schedule Storage Procedure, Periodical exercising requirements / procedure and Shelf life e) Certificates / COC of each Ready Made Article (RMA) vi) Any other document required as per Technical Specification and Qualification Test Plan
3 In addition to above deliverables, following documents are to supplied to HAL, Nasik along with first prototype: a) List of all drawings and Standard of Preparation (SOP), BOM b) ) All design data / drawings related to Electrical and Mechanical assembly c) Design review reports d) Qualification Test Reports (QTR) of tests carried out as per Qualification Test Plan (e) Other documents as required for approval of equipment as per DGAQA directives (f) Technical description and operation instruction manual
4 On issuance of PC, all specification, drawings, acceptance test procedure, Bill of Material and other relevant documents shall be frozen. It is the responsibility of supplier to maintain all the records.
5 To ensure consistent quality of required product during supply of Bulk Production, System Quality Audit of the supplier will be carried out by HAL(Nasik). Supplier to provide all necessary support. Based on the satisfactory System Quality Audit, Further Clearance will be accorded by DGAQA.
6 Quality Assurance coverage for the Bulk supply of product will be provided as per the Acceptance Test Procedure (ATP, to be approved by DGAQA at the time of issuance of Bulk Production Clearance (BPC). Supplier shall be responsible for carrying out the acceptance test as per ATP.
7 Approved Materials against applicable standards viz. MIL/ GOST /OST/ IS/ DIN etc. are to be used to maximum possible extent by vendor and same is to be supported with COC from the vendor’s supplier. However COTS component if used should undergo suitable screening test, as per applicable CEMILAC directive, undertaken by the vendor and reports of the same to be produced
8 HAL reserves the right to visit the supplier’s premises to verify the documents and facilities as per enclosed vendor evaluation criteria format (Annexure- SC1). Supplier to agree for factory visit by HAL team to evaluate the Technical capabilities & facilities of the supplier. TEC reserves the right to obtain information in vendor evaluation criteria format attached as Annexure-SC1. Supplier to agree for providing the relevant information in Annexure-SC1 with all relevant authentic documents as attachment to HAL within 6 days from the date of receipt of request from HAL. Supplier to agree that if the reply is not sent within 6 days, bid offer is liable to get rejected without further reminder/extension. Further, the team/TEC shall reserve the right to recommend/ not recommend the vendor.
9 Supplier should have Design & Manufacturing and testing facilities in India. Supplier to confirm and attach relevant authentic document (Details of Design & Production manpower, infrastructure for development & manufacturing, Software & Hardware developmental tools etc.). It is expected that the supplier would carry out the developmental and manufacturing activities in-house. However, in case a portion of the developmental and manufacturing activity is carried out in co-ordination with another firm, then the complete information of the firm to be provided to HAL. In this case, the supplier shall ensure that agreement, between the supplier & this firm fulfils the technical conditions of this tender.
9.1 The vendor shall give presentation, if required by Technical Evalaution Committee at HAL, Nasik through offline or VC (video conference) before technical evaluation of the technical bids, wherein technical capability of the vendor for undertaking tendered equipment shall be evaluated. The technical presentation shall cover following details:
9.1.1 Technical knowhow/broad understanding of Bid item under development and product development procedure.
9.1.2 Preliminary details of major components of bid item in the schematic diagram including details of components which will be manufactured by vendor.
9.1.3 Technical capability: Domain Specific capability / experience that make bidder most suitable for the bid item under development.
9.1.4 Design capability: Structure and composition of the Design team with roles and responsibilities of the team members with existing work load.
9.1.5 Details of components being outsourced & source of supply.
9.1.6 Project Plan.
9.1.7 Supplier shall have AS9100 or ISO9001 certification. Supplier to confirm and attach certificate to ascertain credentials.
10 Supplier shall have valid AS9100 or ISO9001 certification on due date of the tender. Supplier to confirm and attach certificate to ascertain credentials. In case of renewal, renewal audit should be completed by the due date of the tender.
11 Supplier shall have prior experience in design, development & delivery of ground tester of similar nature (Please refer Note 2 of point No. 1) to DRDO / HAL / Aerospace Industries / DPSU / IAF / Indian Navy / Indian Army / Civil aircraft Operators, etc. Supplier to confirm and attach relevant authentic document. MSE or Startup is exempt from above. However, the vendor should be registered for Products of similar nature as per MoF guidelines issued vide memorandum no. F.20/2/2014PPD(Pt.) dated 25th Jul'16.
12 Supplier should have been operating for at least 3 years, with an average annual turnover of minimum Rs. 0.21 Cr for the past 3 years. Supplier to confirm and attach relevant authentic document. MSE or Startup is exempt from above. However, the vendor should be registered for Products of similar nature (Please refer Note 2 of point No. 1) as per MoF guidelines issued vide memorandum no. F.20/2/2014PPD(Pt.) dated 25th Jul'16.
12.1 Payment Terms : Full Payment will be made on receipt of equipment at HAL's site and after issue of DGAQA Provisional Clearance.
12.2 Quality Issue: The vendor will be technically disqualified for this tender if any ground tester supplied by the vendor to HAL(ND) in past has been identified with design / quality / manufacturing deviation(s) resulting in performance / reliability problem(s), and the issue(s) is/are not resolved by the vendor.
13 The developmental stages will comprise of following. Tentative time lines are indicated for Sl. Nos. 13.1 to 13.4 . The time lines for Sl. Nos 13.5 & 13.7 are as per the delivery schedule mentioned at clause No. 23 of this document. The supplier shall confirm the below mentation tentative time lines within 21 days after the placement of Purchase Order. T0 is placement of Purchase Order for prototype development.
13.1 Design Review(s) : T0 + 2 Months
13.2 Approval of drawing : T0 + 3 Months
13.3 Stage inspection:T0 + 6 Months
13.4 Functional testing, Qualification Testing and PDI: T0+8 Months
13.5 Delivery of prototype at HAL, Nasik: T0 + 9 Months
13.6 Field trial of the prototype at HAL/IAF
13.7 Provisional Clearance from DGAQA: TD + 3 Months (TD: Delivery of prototype)
14 Design review will be conducted during the development phase at HAL (Nasik). The design review committee will be constituted by HAL (Nasik).
15 In the event of any conflict between the requirements specified in Technical Requirements & Qualification Test Plan and its achievement during Development phase, the same shall be clarified / reviewed and frozen during Design review stage by the Committee. The decision of design review committee shall be final and shall be binding to the supplier to comply for the supply of the Prototype.
16 Any minor changes / alternatives suggested at the time of the execution of the development stage may result in better and reliable system for the user. Such minor changes / alternatives to the requirements mentioned in the Technical Requirements, Qualification Test Plan and other documents of the RFP / Purchase Order will be evaluated critically and agreed / disagreed by the Design review committee without any change in functional requirement, cost and time schedule mentioned in the purchase order.
17 Qualification testing to be carried out on prototype by supplier as per Qualification Test Plan. Supplier has to give first time right solution. However, in case of any failure of any prototype during the Qualification Testing, it is the responsibility of the supplier to either repair, modify or manufacture a new prototype in co-ordination with HAL (Nasik) for continuation of Qualification Testing, at the cost of the supplier. This process continues till full Qualification Testing is completed satisfactorily.
18 Supplier is responsible to carry out Qualification Testing at own (Subject to acceptance of HAL / DGAQA (N)) or NABL accredited or Government approved labs or HAL, Nasik or any other labs that is acceptable to HAL (Nasik) / DGAQA (N). All expenses related to testing would be borne by the supplier. However, schedule of testing is to be intimated to HAL, Nasik 15 days in advance for participation / witnessing and co-ordination of the same. Reps of HAL (Nasik) / DGAQA(N) reserves the right to witness the test.
19 Supplier to manufacture, supply and commission prototype for testing at HAL (Bangalore). Also, the supplier has to conduct trials at HAL (Bangalore).
20 Supplier to obtain Provisional Clearance (PC) and Bulk Production Clearance (BPC) from DGAQA (N). HAL (Nasik) will co-ordinate this activity. HAL (Nasik) has the full authority to demand necessary documentation from supplier, required for successful completion of development phase and obtaining PC & BPC from DGAQA (N).
21 Following shall be deliverables along with future bulk supply (procurement against separate Purchase order(s)): i) Each equipment is to be delivered along with one set of special tools, if any, required for equipment. ii) Each equipment is to be delivered with one set of spare parts, if any, required for equipment. iii) Following document shall be supplied with each equipment to the HAL, Nasik: a) ATP report. b) Warranty Certificate. c) maintenance manual / user handbook d) Certificates of each Ready Made Article (RMA). e) Any other document required as per ATP.
22 If Qualification Testing and the field trials are not found satisfactory repeatedly, HAL reserves the right to cancel the order.
23 The expected delivery schedule for Supply of prototype for testing at HAL (Bangalore) is within 9 months from date of placement of PO and DGAQA provisional clearance within 3 months from the date of delivery of prototype unit. The expected delivery schedule for bulk supply: As per staggered delivery schedule.
24 The supplier shall agree to transfer all Intellectual Property Rights (IPR) related to development of subject tendered unit to HAL. Also, Right of Sale rest with HAL. Supplier will not directly deal with any customer for this GSE.
25 After obtaining Provisional Clearance (PC) from DGAQA (Nasik), supplier cannot supply the developed equipment to IAF or any organization or firm directly. In case the supplier receives a requirement / request for supply of this developed item, this request shall be forwarded to HAL.
26 The supplier shall hold confidential technical data and information supplied by HAL and shall not reproduce any such technical data or information or divulge the same to any third party without the prior written consent of HAL.
27 Interested bidders may visit HAL (Bangalore) before submitting the quote for examining the existing GSE. The visit to HAL (Bangalore) is non-mandatory. Vendor has to submit the quote within the Tender opening date stipulated in the enquiry. No subsequent claim will be entertained on the visit.
28 HAL (Nasik), DGAQA (N), RCMA (Aircarft ) & user representative may visit the supplier's premise towards quality audit, process audit, review of the development, etc.. Supplier to extend all the necessary support.
29 HAL will bear the cost of visit of HAL representative to supplier premises, if visit is felt necessary during the development phase. Supplier shall bear the cost of visit of supplier’s representatives to HAL premises or any IAF base during any stage of development and warranty period.
30 Product Support: Supplier should provide Product Support for 10 years after delivery of last equipment. The supplier has to confirm that any documents pertaining to up-gradation of the equipment during its course of exploitation will be supplied.
31 Supplier shall be ready to accept comprehensive AMC after warranty period of developed equipment for its full life for which HAL may enter into separate contract with mutually agreed terms and conditions.
32 Warranty of 12 months from the date of DGAQA approval (issuance of Provisional Clearance (PC))
33 For any reason supplier wishes / decides to close/discontinue the line for manufacture of the product, supplier undertakes to notify such a decision to HAL by means of a prior 2 years notice (before closure of the said production line) in writing so as to enable HAL to place bulk order / a life time bulk before closure of said production line. The said aspect would also form an integral part of the order.
34 Supplier shall agree to provide after sales service all across the country at different HAL divisions / IAF bases.
35 The supplier is required to submit In-house Test Report at the time of sending call for Stage Inspection and Pre Dispatch Inspection (PDI). The format of In house Test report will be decided at the time of Design review. However, HAL reserves the right to request additional relevant information before commencing Stage Inspection / Pre DesATPch Inspection (PDI).
36 The representative of supplier visiting HAL / IAF Base shall have to produce Police Verification approval.
37 The information given / provided / supplied to the supplier through RFP or / and technical discussion (s) during the developmental phase or till / after the issuance of PC shall be utilised by the supplier for the supply of prototype / bulk supply to HAL ONLY. All said information, as mentioned in the preceding line, received by the supplier shall not be used in other project(s) or supply (ies) made to a customer other than HAL, Nasik.
38 Supplier agree to develop prototype meeting the desired requirements in line with technical specification, QTP, ATP, QAP, latest DDPMAS, latest AQA Directive no. 11/2022 (available on AQA website www.dgaeroqa.gov.in).
39 Supplier shall agree to provide all the documentation in the format acceptable to HAL.
40 Supplier shall agree to arrange all the calibrated measuring instruments/gauges during Stage Inspection and Pre-dispatch Inspection.
41 Vendor shall participate competitively in multiple tenders of HAL (NK) taking in to consideration existing capacity as there is possibility that multiple orders are placed by HAL (NK). Vendor shall agree to execute the development activities (refer sl no 13) simultaneously for all prototype, if multiple orders are received from HAL (NK), and ensure that orders are completed within the delivery schedule.
42 Supplier shall agree to consider Air transportability aspects/requirements during the design/development phase of equipment. The prototype shall be able to be transported by any transport aircraft available with IAF. The evaluation of the prototype item to assess its ability to be transported by the air transportation mode will be evaluated during the field trials at HAL (Nasik) / HAL (Bangalore) / any IAF base.
43 All above requirements (Sl. No. 1 to Sl. No. 42) shall be an integral part of the Purchase Order placed on the supplier for the supply of the prototype and bulk supply (if placed).
HINDUSTAN AERONAUTICS LIMITED Aircraft Manufacturing Division, NASIK OJHAR(MIG), NASIK-422 207, INDIA. Ph No- +91-2550-275886 / +91-2550-271024 / 275875 E-mail- [email protected] / [email protected]
TECHNICAL BID FORMAT HAL GST NUMBER- 27AAACH3641R1Z7
EMD NOT APPLICABLE INTEGRITY PACT NOT APPLICABLE PURCHASE PREFERENCE POLICY APPLICABLE SECURITY DEPOSIT NOT APPLICABLE PERFORMANCE BANK GUARANTEE APPLICABLE
TENDER NO 2501_2199_E29515 NAME OF THE FIRM / VENDOR
QUOTATION / OFFER No. VENDOR ADDRESS
VENDOR CODE (IF REGISTERED WITH ANY DIV OF HAL)
GST REGISTRATION NUMBER Mandatory UAM/DIC/NSIC/KVIC/KVIB/COIR BOARD/DIRECTORATE OF HANDICRAFTS & HANDLOOMS/(ANY BODY SPECIFIED BY MINISTRY OF MSME) (KINDLY UPLOAD THE CERTIFICATE ALONG WITH BID) Mandatory for MSME
TIN No. / SERVICE TAX No. Mandatory MENTION THE NAME OF THE FIRM AND PROVIDE DETAILED ADDRESS ON WHICH ORDER TO BE PLACED (IN CASE DIFFERENT FROM ABOVE)
PAN No. Mandatory IS YOUR FIRM IS FALLING UNDER MICRO / SMALL ENTERPRISES CATEGORY? MICRO SMALL
CONTACT PERSON NAME Mandatory IN CASE OF MIRCO / SMALL ENTERPRISES KINDLY UPLOAD THE RELEVANT GOVERNMENT ISSUED CERTIFICATE FOR THE SAME
E-mail ID Mandatory IS YOUR FIRM OWNED BY SC / ST / WOMEN ENTERPRENEUR? SC / ST WOMEN
PHONE / MOBILE No. Mandatory IN CASE OF MIRCO / SMALL ENTERPRISES OWNED BY SC / ST / WOMEN ENTERPRENEUR. KINDLY UPLOAD THE RELEVANT GOVERNMENT ISSUED CERTIFICATE FOR THE SAME. SUPPLIER SHOULD UPLOAD NECESSARY DOCUMENTS TO GET BENEFITS OF SSI/MSME/NSIC OF MSME ORGANIZATION (IF ANY) ALONG WITH QUOTATIONS. FAILURE OF WHICH BENIFITS WILL NOT BE CONSIDERED.
Sl. No. DESCRIPTION QTY UOM Indian Vendors mandatorily to indicate % of local content
1 Cost for: WOW PANEL (Prototype) 1 No.
2 Cost for: (2024-25) WOW PANEL (Bulk Supply) 1 Nos.
3 Cost for: (2025-26) WOW PANEL (Bulk Supply) 5 Nos.
4 Cost for: (2026-27) WOW PANEL (Bulk Supply) 7 Nos.
5 Cost for: (2027-28) WOW PANEL (Bulk Supply) 2 Nos.
6 Cost for: (2028-29) WOW PANEL (Bulk Supply) 2 Nos.
SPECIAL NOTE:- Kindly clearly mention the charges against each column against respective items. These charges are for unit quantity only. In case nothing is mentioned, then it will be assumed that prices are inclusive of all taxes/ charges. No further communication will be made in this regard. 2. Public procurement policy (PPP) is meant for procurement of only goods produced and services rendered by MSE’s .However, traders are excluded from purview of Public Procurement Policy. Traders will not be considered for PPP benefits.Traders and Agents will not be allowed to avail benefits extended under PP Policy.The benefits of PPP should be given to all eligible MSE’s registered with body specified by Ministry of MSME.
7 Purchase Order for supply of Prototype (Sl. No. 1) will be placed. Separate Purchase Order for bulk supply (Sl. No. 2 to 6) would be placed only after DGAQA final Acceptance of the prototype and subject to firm requirement of HAL. However, HAL reserves the right to place purchase order for the bulk supply. The bid will be evaluated on package basis on items (sl. no. 1 to 6 ) against Total Cost indicated above.
8 CURRENCY OF QUOTATION: (For details kindly refer Terms & Conditions Sheet)
9 DELIVERY TERMS (INDIAN VENDORS): Price quoted should be on F.O.R. Destination basis, for delivery at HAL, Nasik/Bangalore Stores inclusive of all charges including transit insurance.
SPECIAL INSTRUCTIONS COMPLINANCE YES / NO REMARKS IFANY
Delivery Schedule: SL.No 1 (Prototype)-Within 12 months from date of placement of PO Sl. No. 2 -6 (Bulk Supply)-Within 6 months from date of placement of order.
TERMS & CONDITIONS
TERMS & CONDITIONS SUPPLIER REMARKS
VALIDITY OF QUOTE (DATE): Price quoted should be net and unless otherwise specified should remain valid for our acceptance for a minimum of 120 days from the closing date of enquiry and the materials of offered should be kept under provisional reservation for this quotation.
PAYMENT TERMS: Our standard payment terms is "DIRECT PAYMENT" only i.e. full payment will be made within 30 days from the date of receipt / inspection and DGAQA Provisional Clearance and final acceptance of the items at our site by RTGS/ NEFT. All transaction charges have to be borne by supplier, and acceptance for the same has to be there in the quotation. If no specific acceptance is there in quotation,then it will be presumed that supplier have accepted the same and no further correspondence will be made in this regard.
LIQUIDATED DAMAGES : In the event of an order, we reserve the right to collect a sum of 0.5% per week of delay or part thereof , subject to a maximum of 10% as our claim-towards liquidated damages on the undelivered part of the order. In case of of vendors not agreeing for LD clause, the maximum LD amount / to the extent not agreed LD value,will be loaded for commercial evaluation, to determine the Technically acceptable L-1 bidder.
Declaration Certificate for procurement of Goods & Services:- I have read the clause regarding restriction on procurement from a bidder of country which shares a land border with India (Enclosed). I hereby certify that this bidder is not from such a country and accordingly does not call for any registration with competent Authority & this bidder is eligible to be considered.
Purchase Preference Policy : i) Public Procurement (Preference to Make in India), Order 2017 and its amemdments issued by GOI, HAL has implemented PPP as per details enclosed. This tender is reserved for Class-I & Class-II local suppliers only.
ii) The 'Class-l & II local suppliers' should provide a “Self Certification” as per the format enclosed at Appendix-B (Type-I) along with technical offer indicating the % of local content along with details of the location(s) at which the local value addition is made along wiith the technical offer.The above sought ''Self certification'' shall be provided on vendor letter head .In case of online tender, scanned copy of the certificate need to be uploaded along with tender and parallely the hard copy of original certiifcate should be submitted to the Division through post/courier. Any bidder has not indicated any % of local content and also not provided Self certification & they fall under non-local category.As such those offers also will not be considered & rejected.
Declaration Certificate for procurement of Goods & Services:- I have read the clause regarding restriction on procurement from a bidder of country which shares a land border with India (Enclosed). I hereby certify that this bidder is not from such a country and accordingly does not call for any registration with competent Authority & this bidder is eligible to be considered.
PERFORMANCE BANK GUARANTEE: Vendor shall furnish a Performance Bank Guarantee as per HAL’s format for 10% of the order value valid up to end of the warranty from a scheduled bank in India / Bank of International repute (for foreign vendor) from the date of acceptance / commissioning or otherwise equivalent amount shall be retained till completion of warranty and other obligation of Purchase Order / contract. In case vendor does not agree for Performance Bank Guarantee / retention of equivalent amount, the offer will be summarily rejected.
Special Terms & Conditions MANDATORY REQUIREMENTS attached herewith
NOTE: KINDLY REFER TERMS AND CONDITONS OF TENDER FOR FURTHER DETAILS. IF VENDOR IS NOT AGREEING TO ANY OF THE CONDITIONS MENTIONED IN HAL TENDER CONDITIONS, THEN SAME SHOULD BE INDICATED IN THE BID. ELSE IT WILL BE ASSUMED THAT THE VENDOR IS AGREEING TO ALL THE CONDITIONS OF THE TENDER.PLEASE MENTION PRICE DETAILS IN PRICE BID ONLY.
HINDUSTAN AERONAUTICS LIMITED Aircraft Manufacturing Division, NASIK OJHAR(MIG), NASIK-422 207, INDIA. Ph No- +91-2550-275886 / +91-2550-271024 / 275875 E-mail- [email protected] / [email protected]
PRICE BID FORMAT HAL GST NUMBER- 27AAACH3641R1Z7
EMD NOT APPLICABLE INTEGRITY PACT NOT APPLICABLE PURCHASE PREFERENCE POLICY APPLICABLE SECURITY DEPOSIT NOT APPLICABLE PERFORMANCE BANK GUARANTEE APPLICABLE
TENDER NO 2501_2199_E29515 NAME OF THE FIRM / VENDOR
QUOTATION / OFFER No. VENDOR ADDRESS
VENDOR CODE (IF REGISTERED WITH ANY DIV OF HAL)
GST REGISTRATION NUMBER Mandatory UAM/DIC/NSIC/KVIC/KVIB/COIR BOARD/DIRECTORATE OF HANDICRAFTS & HANDLOOMS/(ANY BODY SPECIFIED BY MINISTRY OF MSME) (KINDLY UPLOAD THE CERTIFICATE ALONG WITH BID) Mandatory for MSME
TIN No. / SERVICE TAX No. Mandatory MENTION THE NAME OF THE FIRM AND PROVIDE DETAILED ADDRESS ON WHICH ORDER TO BE PLACED (IN CASE DIFFERENT FROM ABOVE)
PAN No. Mandatory IS YOUR FIRM IS FALLING UNDER MICRO / SMALL ENTERPRISES CATEGORY? MICRO SMALL
CONTACT PERSON NAME Mandatory IN CASE OF MIRCO / SMALL ENTERPRISES KINDLY UPLOAD THE RELEVANT GOVERNMENT ISSUED CERTIFICATE FOR THE SAME
E-mail ID Mandatory IS YOUR FIRM OWNED BY SC / ST / WOMEN ENTERPRENEUR? SC / ST WOMEN
PHONE / MOBILE No. Mandatory IN CASE OF MIRCO / SMALL ENTERPRISES OWNED BY SC / ST / WOMEN ENTERPRENEUR. KINDLY UPLOAD THE RELEVANT GOVERNMENT ISSUED CERTIFICATE FOR THE SAME. SUPPLIER SHOULD UPLOAD NECESSARY DOCUMENTS TO GET BENEFITS OF SSI/MSME/NSIC OF MSME ORGANIZATION (IF ANY) ALONG WITH QUOTATIONS. FAILURE OF WHICH BENIFITS WILL NOT BE CONSIDERED.
Sl. No. DESCRIPTION QTY UOM ITEM COST TAX STRUCTURE UNIT TOTAL AMOUNT (UNIT RATE WITH TAXES) LINE TOTAL (UNIT RATE WITH TAXES * LINE QTY)
UNIT PRICE (INR) UNIT PRICE IN WORDS DISCOUNT % PACKING & FORWARDING % FREIGHT CHARGES % INSURANCE % OTHER CHARGES IF ANY (SPECIFY) TAXABLE VALUE CGST % SGST % IGST % REMARKS IF ANY
1 Cost for: WOW PANEL (Prototype) 1 No.
2 Cost for: (2024-25) WOW PANEL (Bulk Supply) 1 Nos.
3 Cost for: (2025-26) WOW PANEL (Bulk Supply) 5 Nos.
4 Cost for: (2026-27) WOW PANEL (Bulk Supply) 7 Nos.
5 Cost for: (2027-28) WOW PANEL (Bulk Supply) 2 Nos.
6 Cost for: (2028-29) WOW PANEL (Bulk Supply) 2 Nos.
SPECIAL NOTE:- Kindly clearly mention the charges against each column against respective items. These charges are for unit quantity only. In case nothing is mentioned, then it will be assumed that prices are inclusive of all taxes/ charges. No further communication will be made in this regard. 2. Public procurement policy (PPP) is meant for procurement of only goods produced and services rendered by MSE’s .However, traders are excluded from purview of Public Procurement Policy. Traders will not be considered for PPP benefits.Traders and Agents will not be allowed to avail benefits extended under PP Policy.The benefits of PPP should be given to all eligible MSE’s registered with body specified by Ministry of MSME.
7 Purchase Order for supply of Prototype (Sl. No. 1) will be placed. Separate Purchase Order for bulk supply (Sl. No. 2 to 6) would be placed only after DGAQA final Acceptance of the prototype and subject to firm requirement of HAL. However, HAL reserves the right to place purchase order for the bulk supply. The bid will be evaluated on package basis on items (sl. no. 1 to 6 ) against Total Cost indicated above.
8 CURRENCY OF QUOTATION: (For details kindly refer Terms & Conditions Sheet)
9 DELIVERY TERMS (INDIAN VENDORS): Price quoted should be on F.O.R. Destination basis, for delivery at HAL, Nasik/Bangalore Stores inclusive of all charges including transit insurance.
SPECIAL INSTRUCTIONS COMPLINANCE YES / NO REMARKS IFANY
Delivery Schedule: SL.No 1 (Prototype)-Within 12 months from date of placement of PO Sl. No. 2 -6 (Bulk Supply)-Within 6 months from date of placement of order.
TERMS & CONDITIONS
TERMS & CONDITIONS SUPPLIER REMARKS
VALIDITY OF QUOTE (DATE): Price quoted should be net and unless otherwise specified should remain valid for our acceptance for a minimum of 120 days from the closing date of enquiry and the materials of offered should be kept under provisional reservation for this quotation.
PAYMENT TERMS: Our standard payment terms is "DIRECT PAYMENT" only i.e. full payment will be made within 30 days from the date of receipt / inspection and DGAQA Provisional Clearance and final acceptance of the items at our site by RTGS/ NEFT. All transaction charges have to be borne by supplier, and acceptance for the same has to be there in the quotation. If no specific acceptance is there in quotation,then it will be presumed that supplier have accepted the same and no further correspondence will be made in this regard.
LIQUIDATED DAMAGES : In the event of an order, we reserve the right to collect a sum of 0.5% per week of delay or part thereof , subject to a maximum of 10% as our claim-towards liquidated damages on the undelivered part of the order. In case of of vendors not agreeing for LD clause, the maximum LD amount / to the extent not agreed LD value,will be loaded for commercial evaluation, to determine the Technically acceptable L-1 bidder.
Declaration Certificate for procurement of Goods & Services:- I have read the clause regarding restriction on procurement from a bidder of country which shares a land border with India (Enclosed). I hereby certify that this bidder is not from such a country and accordingly does not call for any registration with competent Authority & this bidder is eligible to be considered.
NOTE: KINDLY REFER TERMS AND CONDITONS OF TENDER FOR FURTHER DETAILS. IF VENDOR IS NOT AGREEING TO ANY OF THE CONDITIONS MENTIONED IN HAL TENDER CONDITIONS, THEN SAME SHOULD BE INDICATED IN THE BID. ELSE IT WILL BE ASSUMED THAT THE VENDOR IS AGREEING TO ALL THE CONDITIONS OF THE TENDER.PLEASE MENTION PRICE DETAILS IN PRICE BID ONLY.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
QTP.pdf
TENDER_DOCUMENT • 0.60 MB
Technical_Specifications.pdf
TENDER_DOCUMENT • 0.45 MB
Vendor_Evaluation_Form_SC1.doc
TENDER_DOCUMENT • 0.07 MB
Annexure_I.pdf
TENDER_DOCUMENT • 0.27 MB
Appendix_A_TypeII.pdf
TENDER_DOCUMENT • 0.29 MB
AuditorsCertificationLocalContentifapplicable.pdf
TENDER_DOCUMENT • 0.04 MB
PERFORMANCEBANKGUARANTEEFORMAT.pdf
TENDER_DOCUMENT • 0.18 MB
SelfCertificationLocalContent.pdf
TENDER_DOCUMENT • 0.02 MB
TENDERCONDITIONINDIAN.pdf
TENDER_DOCUMENT • 0.29 MB
ADDITIONALCLAUSE_MSME.pdf
TENDER_DOCUMENT • 0.20 MB
ATP.pdf
TENDER_DOCUMENT • 1.63 MB
SPECIAL_TERMS_AND_CONDITIONSl.pdf
TENDER_DOCUMENT • 0.29 MB
TECHNICALBIDPDF.pdf
TENDER_DOCUMENT • 0.55 MB
Special__T__C.xlsm
TENDER_DOCUMENT • 0.02 MB
TechnicalBidL.xlsm
TENDER_DOCUMENT • 0.04 MB
PriceBidL.xlsm
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .