REPAIR AND RENOVATION WORK IN B5 12 SAF GAMES VILLAGES

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling flush door and stacking within 50 metres lead :

Of area 3 sq. metres and above

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Dismantling old plaster or skirting including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing Cement concrete work in Sunken floors stacking material within 50 metres lead.CC 1:3:6

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc.,

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

110 mm diameter

75 mm diameter

50mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Bend 87.5° 110 mm bend

Providing and fixing UPVC trap of self cleansing design with screwed down or hinged grating including necessary lubricant, slip ring complete, including cost of cutting and making good the walls and floors: 110 mm inlet and 75 mm outlet

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

20 mm nominal outer dia Pipes

Providing and laying in position cement concrete for sunken floor filling etc,. of specified grade excluding the cost of centring and shuttering above plinth level and up to floor five level .

1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size)

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in floor, over 20 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.

Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.

Size of Tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of 300mm X 450mm size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and applying the joints with Epoxy grout and matching pigment etc., complete. For Ceramic floor tiles of size 300x300 mm (3mm spacer).

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Servicing of window, and door

Providing and fixing Stainless Steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing Stainless Steel handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Twin rubber stopper

Providing and fixing curtain rods of 1.25mm thick Stainless steel pipe with two Stainless steel brackets fixed with SS screws and wooden plugs etc. wherever necessary complete.

25 mm diameter.

Providing and fixing SS handles for door 125mm

Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lift.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

Two or more coats

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work

Providing and fixing Cabinet type mirror of superior glass (of approved quality) with storage facility of Size 350x450mm (prayag cat no 551 or equivalent)

450x350mm (outer dimensions)

Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead :

With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe 32 mm dia

Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour.

15 mm nominal bore with 45 cm length.

Providing and fixing SS sink with drain board

Providing and fixing 15mm nominal bore CP brass angle valve of approved IS Standard etc as directed by Engineer-in-Charge.

providing and fixing 15mm nominal bore CP brass long body bib cock of approved quality conforming to IS standard complete.

providing and fixing 15mm nominal bore CP brass Two way bib cock of approved quality conforming to IS standard complete.

providing and fixing 15mm nominal bore CP brass Health Faucet of approved quality conforming to IS standard complete.

providing and fixing 15mm nominal bore CP brass 2 in 1 wall mixer of approved quality conforming to IS standard complete.

providing and fixing 15mm nominal bore CP brass Sink cock of approved quality conforming to IS standard complete.

providing and fixing 15mm nominal bore CP brass Stop cock of approved quality conforming to IS standard complete.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin with single 15 mm C.P. brass pillar tap

Providing and fixing 130mm X 130mm SS grating

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china pedestal type water closet (Indian type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan

Removing of damaged Cupboard doors and frames

Providing and fixing factory made UPVC sliding window with mosqutio net SS 316

M.S Grill

Providing and fixing factory made WPC door and frame

Providing and fixing insect screens for doors using aluminum frame size 43x18x1.5mm thick (powder coating shall be Epoxy/polyester powder make appoved by the engineer in charge)alround and with two no mullion upto opening size to stiffened the screens, which is made up of stainless steel grade 304 micro mess with 0.5mm wire 1mm aperturewith necessary suitable rubber beading and plastic hinges size,fixed with holding aluminium frame for doors ,frame jointing 50x12x1.2 mm cleat angle at corners in shutter portions as per the manufacture spefications etc all complete and with nessary handles and magnetic catchers , stain steel screws AISI 304).

Providing and fixing insect screens for windows using aluminum frame size 20x9x1.3mm thick (powder coating shall be Epoxy/polyester powder make appoved by the engineer in charge)alround and with two no mullion upto opening size to stiffened the screens, which is made up of stainless steel grade 304 micro mess with 0.5mm wire 1mm aperturewith necessary suitable rubber beading and plastic hinges size, bars (horizontal) jointing with solid pvc at junction shutter section as per manufacturer specification including stopper (PVC) two numbers per shutter, handle two numbers per shutter (note in shutters meeting styles over lapped with required projection, stainless steel bar (horizontal bar) five numbers, dimension and tolerance shall conformed IS 6477, stain steel screws AISI 304).

Supplying and fixing of following sizes of medium class PVC conduit alongwith accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVCconduit / PVC casing and capping / Cable Management etc as required.

a) 3 x 1.5 sq.mm

b) 3 x 2.5 sq.mm

c) 3 x 4 sq.mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess i/c providing and fixing 3 pin 25amps modular socket outlet with 25amps plug top and 25amps motor Starter, connection, painting etc as required.( For A.C.Connection, motor starter & socket to be fixed separately in different location).

Removing and refixing of ceiling fan

Supplying and fixing suitable size module GI box with modular plate and cover in front on surface or in recess, etc. as required.

a) 2 module

b) 3 module

c) 4 module

d) 6 module

e) 8 module

f) 12 module

Supplying and Fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

a) 5/6 Amp Switch

b) 5/6 Amp two way Switch

c) 5/6 Amp socket

d) 2 module fan regulater

e) 15 Amp Switch

f) 15 Amp socket

Supplying and fixing of 20 to 22 W Tube light testing & commissioning etc. as required

Supplying and fixing 5 amps to 32 amps rating, 240 / 415 volts, 10 KA 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single Pole

b) Four Pole

Supplying and fixing sheet steel Legrand 4way TPN DB 240volts on surface complete with tinned copper bus bar inter connections and power pointer including earthing etc. box

Providing and fixing fancy holder