Khorda Providing Independent Canal Based Water Works and Raw Water for 3 Nos Water Works

Amount

Supply & Erection of Horizontal spindle split casing type pumping sets of four (4) star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM 3p phase 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. For Sump well near Khorda Distry. A Raw water pump set 1000 LPM 30 mtrs head (10.00 BHP)

Supply and fixing following CI D/F pipe and /including of jointing material, laying, jointing refilling including making adequate support of masonry/ concrete for delivery and suction pipe from bell mount in the collecting tank upto the rising main laid by the Department as per plan shown from the foundation wall of Pump chamber for the all the raw water and clear water pumping set at water works in position, as per specification given in schedule No. II For Pumping Machinery (A) Detail of pipe and specials a) CI D/F pipes 150mm -

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly shouted with suitable angle iron frame work and completely powder coated of approximate size 500 x 1200 mm and 400 mm deep having following accessories 1) Incomer switch 200 Amp. 2) Aluminum bus bar chamber of 300 Amp capacity 3) Amp meter 100 x 100 mm range 0 to 500 Amp. (AE/ KAPPA/ L&T) 4) Indicating Lamp- One set

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly shouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm deep having following items. A) For Raw water Pump set for 1000 LPM x 30 Mtr Head=2 Nos. (a) Main switch – 200 Amp 2 Nos. ( L&T, Siemens, ABB) (b) Volt meter 100 x 100 mm range 0 to 500 volt 1 No.(AE/KAPPA/ L&T) (c) Amp meter 100 x 100 mm range 0 to 100 Amp 2 No. - (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS – 1 No & ASS = 2 No. of approved make. (f) SPP 2 No. of approved make (g) Motor starter, star delta 2 No for 1000 LPM x 30 Mtr Head Motor ( L&T, Siemens, ABB) (h) Capacitor of suitable capacity – 2 Nos. (i) Indicating Lamp – One Set J) Change over switch – 200 Amp One set]

Supply, erection, testing of ISI marked copper wire with underground system in PVC and flexible pipes copper wire size , 6mm Sq complete in all respects with accessories like thimble etc.

Supply erection, testing of ISI marked copper wire for 2 No panel boards from main switch to panel and wiring of panel with size 10mm sq (copper wire) ISI marked complete in all respects with accessories like thimble etc. complete in all respect

PARASH CONTRACTOR