Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.4 LAccepted-AOC | L1 | Accepted-AOC Found lowest bidder | |
| 2 | L2₹29.8 L+₹27,792.50 (0.94%)Rejected-Finance NOT SPECIFIED | L2 | Rejected-Finance Second lowest | |
| 3 | L3₹30.1 L+₹57,759.50 (1.96%)Rejected-Finance PLOT NO 46 SECTOR PH I 03 GREATER NOIDA UP 201306 | GAUTAM BUDDHA NAGAR | UTTAR PRADESH | 201306 | L3 | Rejected-Finance Third lowest | |
| 4 | L4₹30.5 L+₹97,449.50 (3.30%)Rejected-Finance | L4 | Rejected-Finance Forth lowest | |
| 5 | L5₹33.7 L+₹4.2 L (14.3%)Rejected-Finance | L5 | Rejected-Finance Fifth lowest |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (North) Meerut Cantt
Office of the GE (North) Meerut Cantt
COMPREHENSIVE MAINT FOR OFFRS MD ACCN UNDER AGE B/R-I OF GE (NORTH) MEERUT CANTT
2023_MES_593580_1
8406/E8
Open Tender
Civil Works
Item Rate
180 days
Meerut
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (North) Meerut
₹92,000
Yes
28 Jun 2023
6 May 2023
7 Jun 2023
6 May 2023
5 Jun 2023
22 May 2023
Amount
Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.
M&L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.
M&L for Brick work with subclass 'B' old size bricks, (clay burnt bricks) straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.
Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L Non skid ceramic colored tiles 7-8mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cement to match the shade of tile laid over and including 15 mm the screed ded in cement mortar 1:6 complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified and directed.
M&L Vitrified Ceramic tiles 8 to 10mm mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of tile laid over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed.
M&L Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm, as on vertical surfaces such as skirting / dados etc. set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of tile laid over and including 10mm rendering on vertical surfaces in cement mortar 1:4 complete all as specified and directed.
M&L Colored Glazed colour ceramic tiles on vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of tile laid over and including 10mm thick rendering plaster in cement mortar 1:4 joint free with grout of matching shade complete all as specified and directed.
M&L for 18-20mm thick black granite stone slab machine cut as in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
M&L for 18-20mm thick black granite stone slab machine cut on vertical surfaces such as skirting / dado and the like laid over and including 10mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.
M&L machine cut prepolished kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
All as per Srl item No 12.00 here-in-before but as in riser of steps, skirting/dado laid over 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exceeding 1.5 Sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.
Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.
S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Molded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/ Sqmm modulus of elasticity 850 N / Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, complete all as specified and directed. Note:- stainless steel butt hinges and necessary Stainless steel screws shall be measured and paid separately.
S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.
S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or stainless steel dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.
S & F Factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly → supplied and fitted to chowkats complete all as specified and directed.
S&F powder coated anodized aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) including stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodized fittings such as hinges, handles including powder coated anodized aluminium frame, grill with one or more rebates including 5.50 mm thick black glass complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets. complete all as specified and directed.
M&L 18/19mm thick WPC Solid board, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with stainless steel screws to WPC frame work in cup boards, and kitchen cabinet rebated complete all as specified and directed.
M&L in repair stainless steel basket size (15 inch X 20 inch X 4 inch) for modular kitchen cutlery tray/basket with complete sliding Arrangement fixed in kitchen cabinet farm complete all as specified and directed.
M&L in repair for stainless steel basket size (15 inch X 20 inch X 6 inch) for modular kitchen tray/basket with complete sliding Arrangement fixed in Kitchen cabinet farm complete all as specified and directed.
M&L in repair for stainless steel basket size (15 inch X 20 inch X 8 inch) for modular kitchen crockery tray / basket with complete sliding Arrangement fixed in kitchen cabinet farm complete all as specified and directed.
M&L in repair for stainless steel basket size (15 inch X 20 inch X 10 inch) for modular kitchen grain troIIy basket with complete sliding arrangement fixed in kitchen cabinet fram complete all as specified and directed.
S&F for Stainless steel wide 110 degree Hydraulic hing fixed with stainless steel screw complete all as specified and directed.
S&F 125mm long Brass handles, cast type, polished bright fixed with stainless steel screw complete all as specified and directed.
S&F 75mm long Brass handles, cast type, polished bright fixed with stainless steel screw complete all as specified and directed.
S&F 150mm size aluminium alloy handles cast type anodized fixed with stainless steel screw complete all as specified and directed.
M&L preparation of new steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel over one coat of primer complete all as specified and directed.
S&F aluminium anodized tower bolts 150mm long, of extruded section. fixed with stainless steel screw complete all as specified and directed.
S&F aluminium sliding bolt 300mm long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
S&F mild steel heavy weight butt hinges 100mm in size complete all as specified and directed.
S&F aluminium anodized barrel tower bolt with bright bolt 200 mm long complete all as specified and directed.
M&L for stone slab 50mm thick stone dressed true and square, in one length not less than 60cm and n. exc 120cm in chajjas, sunshades, Plinth Protection etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.
S&F in repair mild steel 150mm size helical door spring including roller and roller plate fixed with screws to wooden chowkat or welded to steel frame, complete all specified and as directed.
S&F in repair aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.
M&L 15 mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.
M&L 5 mm thick rendering on fair faces of brick work or concrete surfaces, finished even and smooth on ceiling in cement mortar 1:3 complete all as specified and directed.
M&L for applying 15 mm thick rendering using ready mix plaster bags in cement mortar 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per 50 kg weight of cement or as per manufacturer instructions complete all as specified and directed. Note :- Water proofing compound consumed under this item shall be measured and paid seperately under "supply only item" of this shedule of works.
M&L preparing plastered new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L complete removal of existing treatment of wall by mechanical means complete all as specified and directed.
M&L for 1 coat of primer using roller complete all as specified and directed.
M&L for two coat of OBD using roller for painting complete all as specified and directed.
M&L for applying 2mm thick wall care putty for making surface smooth complete all as specified and directed.
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 Sqm over new surfaces using roller for painting complete all as specified and directed.
M&L for preparation of Old plastered surfaces of wall and apply two coat of cement base paint complete all as specified and directed.
M&L preparing plastered Old plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Demolition of reinforced cement concrete of any description and any position not otherwise specifically provide ( reinforcement cut to facilitate demolition) complete all as specified and directed.
M&L Form work to sides and soffits of beams lintels etc finished rough complete all as specified and directed.
M&L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4 & finishing exposed concrete surface complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.
All as per Srl item No 57.00 here-in-before but 6 to 8 mm dia complete all as specified and directed.
Supplying and laying of CPVC 25 mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors including taking up or down old unserviceable GI tubing complete all as secified and directed
Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors including taking up or down old unserviceable GI tubing complete all as secified and directed
Dismantling of old water tank of capacity exceeding 250 Ltrs & not exceeding 500 Ltrs and Supplied, hoisted and fixed in position rotational moulded polyethylene water storage tanks (white color) IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes with and including 20mm bore ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair chromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as secified and directed
S&F in repair Floor 140mm over all length with flap door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as secified and directed
S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union complete all as secified and directed
S&F in repairs vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.
S&F in repair Vitreous China wash hand basin including pedestal, white, flat back, size 550 x 400 mm, including fixing accessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.
S&F in repairs PVC Bath cabinet with mirror 18"x22"x4.25" complete all as specified and directed.
S&F in repairs, chromium plated towel rack of size 24" complete all as specified and directed complete all as secified and directed
S&F in repair vitreous china ware EWC complete with internal fittings complete all as secified and directed.
S&F in repairs for CP Health Faucet brass body with wall hook and one meter stainless steel braided rubber hose pipe complete all as specified and directed.
S&F in repair Toilet paper holder of brass chromium plated conforming to the samples kept in the office of Engineer-in-Charge complete all as secified and directed
S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed in repair complete all as secified and directed
S&F in repairs 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed.
S&F in repairs 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed.
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as secified and directed
S&F in repairs fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.
S&F in repair chromium plated towel rail 20mm dia D type 600 mm long as a approved quality. complete all as specified and directed.
S&F in repairs PVC pipes of pressure rating 10 kgf/ Sqcm fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed
S&F in repair 10 litre capacity PVC valveless, Symphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.
S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as secified and directed
S&F in repair ,PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as secified and directed
S&F in repair PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.
S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing with Granite Stone and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as secified and directed
S&F in repair Brass chromium plated shower rose 125mm size complete all as secified and directed
S&F in repair CP brass soap dish complete all as secified and directed
S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as secified and directed
S&F in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints fixed to walls as in waste complete all as specified & directed.
S&F in repais 110mm bore PVC Pipes single socketed in any length with rubber ring joints, laid in trenches as in waste and rain water pipes complete all as specified & directed.
S&F in repairs PVC bends 75mm bore, any radius complete all as specified & directed.
S&F in repairs PVC bends 110 mm bore, any radius complete all as specified & directed.
S&F in repairs 110mm PVC (SWR) vent cowl complete all as secified and directed
S&F in repairs110 PVC (SWR) junction single, (Single T) equal or unequal complete all as secified and directed
S&F in repairs 110mm PVC (SWR) 'S' trap complete all as secified and directed
S&F in repairs stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as secified and directed
S&F in repairs gun metal globe valves or gate 20 mm dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as secified and directed
S&F in repair 50 mm wide rubber beading for doors of required size complete all as specified & directed.
S&Fin repairs plate rack of stainless steel, sheet 1mm thick for kitchen overall size 750x900x250 mm fixed with plugs and washers on wall complete all as specified and directed.
S&F in repairs 25mm dia Stainless steel decorated curtain rod with bracket and ring complete all as specified and directed.
Treatment the soil under plinth protection at the rate of 5 liters of emulsion per square meter of surfaces area complete all as secified and directed
M&L for dubbing out average 20mm thick on irregular faces of walls and ceilings cement mortar 1:4 complete all as secified and directed
M&L for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) Material & labor for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labor for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square meter of surfaces. (d) Material & labor for applying bitumen grade 85/25 over priming coat @ 1.20 Kg per Square meter. (e) Material & labor for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labor for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix of 32mm dia GI pipe medium grade, 450m long 9(for draining out the water) complete all as secified and directed
M&L for cutting of bushes, small trees trunks shrubs of any dia and girth from roof projection, chajjas , wall junction and parapet wall etc at any height by necessary demolition of brick work etc if required and making good disturbed surfaces to match with existing finishes with and including rendering in cement mortar 1:4 / PCC 1:3:6 type B0 (using 12.5mm graded stone aggregate) / brick work in cement mortar 1:4 as required at site complete all as secified and directed
Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.
M&L for 50mm thick of PCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in roof surfaces complete all as secified and directed
M&L for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate) complete all as secified and directed
Supply only liquid water proofing compound complete all as secified and directed
M&L for surface Preparation: The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of PCC shall be done with wire brushing to attain smooth leveled surface. Cracks shall be rectified, filled using dual shrinkage compensated Repair Mortar and dried for 72 hours before laying the liquid applied membrane. Grout: Providing Chemical injection treatment in the form of pressure grouting to the construction joint and cracked portion at 1m c/c by injecting cement slurry mixed with dual shrinkage compensated cementations grout Injection grout additive, in the required consistency through the pre fixed PVC nozzles in the 18 mm dia holes, fixing of PVC nozzles with instant setting cement. Angle fillets/Coving: Providing and making of fillet, 50mm x 50mm on sharp corner of terrace with cement sand polymer mortar (add “multipurpose mortar”, 10% by weightofcement). First apply the bonding coat of Multi-Purpose Polymer 5-10% diluted in water and add to cement slurry. Apply the bonding slurry and apply the polymer mortar over the sharp edges. Note: Grouting will be done when and where ever required.
Treatment of pipe entry points: Preparing the inside surface of core and PVC /MS Pipe by roughening using suitable Sand paper to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Packing the gap using free flow able non shrink cement polymer based grout up to the surface of the bore while the bonding agent is in tacky state. the periphery of PVC pipe should be sealed with Hybrid PU Sealant or dual shrinkage compensated Micro concrete Note: Will be done when and where ever required Application of Asian Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethane with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3(Resin:Hardner) Supplying, providing and applying waterproofing treatment to Podium area with single component highly elastomeric seamless cold applied modified PU coating complete as per manufacturer’s specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have a dual combination of 280% elongation. Material coverage 1.2kg /sq.mt. (Note: Contractor is required to deposit 100% CA quantity to the Engr-in-Charge, within 15 days of acceptance of contract.
M&L repair to overhang portion of chajja, facia, drop wall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account) complete all as secified and directed
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and threading making groves for fixing of man hole cover including necessary form work complete all as secified and directed
Demolition of cement concrete of ground floor n exc 15 cm in depth in any position not otherwise specifically provided for complete all as secified and directed
M&L for chequered cement concrete colour tiles glossy finish size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as secified and directed
M&L for repairing existing RCC structure work by grunting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including scaffolding and welding wire mess 2 mm dia and size of wire mesh 50mm X 50 mm including cutting welding and placing position complete all as secified and directed
ATHARV CONSTRUCTION
Shri Kanchan Engineers
BHAGWAN DAS & Co
A V ENTERPRISES
M/S AMAR ELEKTRO CENTRE
SA construction co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .