SPECIAL REPAIRS TO KV SCHOOL NO.1 (WING B) GROUND FLOOR AT OLD AMRITSAR CANTT

Amount

Demolition of cement concrete in ground floors and pavings not exceeding 15cms thickness ( below or above ground level) and disposing the unserviceable old demolished material, debris and rubish to a distance exceeding 50 metres but not exceeding 100 metres away to low lying areas complete all as specified and directed by the Engineer-in-Charge.

Material & Labour for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring & similar works , surfaces finished fair and even without using extra cement complete all as specified and directed by the Engineer-in-Charge.

Material & labour for 20-25mm thick machine cut kota stone slab flooring with Kota stone of size 580mm X 580 mm , laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab ; over and including 20mm thick screed bed in cement mortar 1:6 , with & including cutting, rubbing and mirror polishing to the entire kota stone slab flooring with rubbing machine using suitable size of cutting stones to the entire satisfaction of the AGE , complete all as specified and directed by the Engineer-in-Charge.

Material & labour for 20-25mm thick machine cut kota stone slab in riser of steps, skirting, dado and pillar with Kota stone of size 580mm X 200 mm , laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab ; over and including 10mm thick screed bed in cement mortar 1:4 , with & including cutting, rubbing and mirror polishing to the entire kota stone in riser of steps, skirting, dado and pillar with rubbing machine using suitable size of cutting stones to the entire satisfaction of the AGE , complete all as specified and directed by the Engineer-in-Charge.

Dismantling, floor, hearth or wall tiling /terrazo including cement mortar bedding but not backing and disposing the unserviceable old demolished material, debris and rubish to a distance exceeding 50 metres but not exceeding 100 metres away to low lying areas and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.

Material & Labour for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors & similar works , surfaces finished even & smooth without using extra cement complete all as specified and directed by the Engineer-in-Charge.

Material & Labour for Granite stone (of any type) slab work (table rubbed and polished) 20mm thick as in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite ; over and including 15mm thick screed bed/rendering in cemnet mortar (1:4) complete all as specified and directed by the Engineer-in-Charge.

Material & labour for 6mm thick Glazed ceramic coloured tiles of size 450mm x 300mm , on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match ; over and including 10mm thick rendering/Screed bed in cement mortar (1:4) on brick surface complete all as specified and directed by Engineer-in-Charge.

Material & labour for Coloured/printed non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 Square Metre but not exceeding 0.18 Square Metre,as in floors & similar works etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match ; over & including 15mm thick screed bed or bedding layers in cement mortar (1:6) complete all as specified and directed by the Engineer in Charge.

Material & labour for 10mm thick vitrified light shade ceramic tiles (Square /rectangular) area of each tile not exceeding 0.36 Square Metre, as in floors & similar works etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match ; over & including 15mm thick screed bed or bedding layers in cement mortar (1:6) complete all as specified and directed by the Engineer in Charge.

Taking down cement plaster from walls, ceiling , pillars, corniese etc ; including raking out joints hacking for key scrubbing down with water and dispose off debries out side MoD land where directed , after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.

Material & labour for 15 mm thick rendering in cement mortar 1:4 on concrete or brick masonary surfaces of walls, pillars, corniese etc and surfaces finished even and smooth without using extra cement , complete all as specified and as directed by the Engineer in Charge.

Material & labour for preparation of new plastered surfaces of walls, pillars, corniese etc and applying 2mm(average thickness) thick coat of birla white cement base putty and made the surfaces even & smooth by rubbing the surfaces with suitable number of sandpaper to the entire satisfaction of the Engineer in Charge ; including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.

Material & labour for complete removal of old existing treatment from surfaces of Walls,Ceiling,Pillars,Cornices etc , including brooming down or steel wire brushing; scraping down smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying 2mm (average thickness) thick coat of birla white cement base putty and made the surfaces even & smooth by rubbing the surfaces with suitable number of sandpaper to the entire satisfaction of the Engineer in Charge ; including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.

Material & labour for applying two coats of oil bound distamper (white or tinted) Ist Quality, over a coat of primer (of same make of OBD) on walls,ceiling,pillars, cornices etc ; over already prepared surfaces under item no.13 & 14 above, including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.

Taking down wooden shutter of any description of size exceeding 1 Square Metre and not exceeding 2 Square Metre and refixing the same shutter in the same opening after minor resecuring or easing & adjusting complete all as specified and directed by the Engineer in Charge.

Material & labour for preparation old painted wooden surfaces of any description, exceeding 10 cm width or girth not otherwise described, and applying one coat of synthetic enamel paint 1st quality, including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and directed by the Engineer-in-Charge.

M/S RASHPAL CONSTRUCTION CO

RAJ KAMAL BUILDERS

M/s Vijay Construction Co.

M/s MAHAJAN CONSTRUCTION CO.

Darshan Singh Ghai and Sons

Kalia Construction Company

Santokh Singh and Associates