Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹4.1 Craccepted-finance | ₹4.1 Cr | accepted-finance |
Tender Value
Refer Docs
EMD Value
₹5.9 L
Closing Date
29 Dec 2025, 10:30 pmClosed
Bengaluru Water Supply And Sewerage Board
JAGADEESH RAJANNA
Work of Providing Sewerage System to Intercept Sewage from laterals and HSCs directly discharging to V200 from Balayana kere, Pattegarapalya surrounding areas of Govindaraj nagar Constituency and its connected SWDs across the catchment area of Kethamaranahalli valley
BWSSB/2025-26/WS/WORK_INDENT3026
BWSSB/2025-26/WS/WORK_INDENT3026
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
BWSSB Chief Engineer WWM West Bengaluru
7 documents required · 7 mandatory
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To qualify for award of this contract, each Tenderer in its name should have the below mentioned eligibility criteria in the last five financial years i.e., 2020-21 to 2024-25 As a Prime Contractor, the tenderer should have satisfactorily completed at least one similar nature of UGD work of value not less than Rs.231.49 lakhs
To qualify for award of this contract, each Tenderer in its name should have the below mentioned eligibility criteria in the last five financial years i.e. 2020-21 to 2024-25 b)Should have executed in any one financial year, a minimum quantity of i)24 Rmt of of 600 mm dia and above RCC NP-3 class sewerii)24 Rmt of 900 mm dia and above RCC NP-3 class seweriii)12 Rmt of of 1200 mm dia and above RCC NP-3 class sewer iv)2400 Rmt of 300mm dia and above DWC HDPE pipev)480 Rmt of 400mm dia and above DWC HDPE pipevi)1240 Cum of RCC/PCC
To qualify for award of this contract, each Tenderer in its name should have the below mentioned eligibility criteria in the last five financial years i.e., 2020-21 to 2024-25Should have achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.926 lakh.
Liquid assets and /or availability of credit facilities of not less than Rs.154.33 lakh (Credit lines/letter of credit/certificates from Nationalised /Scheduled banks in India for meeting the fund requirement etc.)
Assessed Available Tender Capacity: (A xN x1.5 - B) greater than or equal to Rs.462.98 lakh where A equal to Maximum value of civil engineering works executed in any one year during the last five years (updated to 2025-26 price level at 10percent per year) taking into account the completed as well as works in progress. N equal to Number of years prescribed for completion of the works for which tenders are invited. B equal to Value at 2025-26 price level of existing commitments and on-going works to be completed during the next 12 months.
FORM OF TENDER
ALL TERMS AND CONDITIONS ARE AS PER BID DOCUMENT
₹5,000
₹5.9 L
29 Dec 2025
15 Dec 2025
30 Dec 2025
18 Dec 2025
18 Dec 2025
Work of Providing Sewerage System to Intercept Sewage from laterals and HSCs directly discharging to V200 from Balayana kere, Pattegarapalya surrounding areas of Govindaraj nagar Constituency and its connected SWDs across the catchment area of Kethamaranahalli valley
Desilting of sewerlines by mechanical Jetting, Sucking, Grabber, Scrapper etc means, setting up the over pumping arrangements, rodding and dislodging of accumulative silt from the pipeline, removal o...
For above 600 to 900mm diameter
For above 1000mm diameter
Dismantling of existing structures like culverts bridges retaining walls and other structure comprising of masonry cement concrete wood work steel work including T&P and scaffolding wherever necessary...
Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Mechanical means Bituminous course
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out construction of shoring strutting barricading c...
Depth exeeding 1.50m, but not exeeding 3.0m
Earth work excavation by manual means for drains canals waste weir draft approach channels key trench foundation of Bridges and such similar works as per drawing and technical specifications including...
Connecting the existing lateral connections to the proposed existing Sewer Mains including earth work excavation in all soils, lowering laying barricading dewatering jointing RCC NP3 Class pipes refi...
Hydraulic Excavator of 0.9cum bucket
Air Compressor 500 cfm
Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and installation of Class SN 8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lo...
For SN 8 Double Wall Corrugated HDPE pipe sizes of 400mm diameter.
Providing and installation of Class SN 8 Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site an...
ID COUPLER fitting for 400mm diameter pipes
Providing and laying in position Cement Concrete for all Sub structures of building Irrigation works Sub structure works of bridges Drain works and other parallel works from 0.50m to 3.50m height The ...
Additionalities for Formwork, Centering Scaffolding Foundation Sub structure of Cross drainages
Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with bind...
Supply and fixing of SFRC machinhole cover (Heavy Duty) made as per IS to suit existing damaged machinhole cover after removing the debries from inside and outside the existing machinhole etc. with a...
Providing S and S RCC SPUN VIBRATED CAST PIPES REINFORCED pipes NP 3 Class conforming to IS 4581988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
For RCC NP3 Class pipe of 600mm dia.
For RCC NP3 Class pipe of 1200mm dia.
Construction of RCC Machinehole chambers of 1 1.5 3 proportion or approved type Cast-insitu/Pre cast RCC Machinehole chambers constructed using form vibrators of standard type with barricading danger ...
Constructing RCC Machinehole of 1.50m internal dia 2.00m depth and SFRC cover & frame
Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland/Pozzolana cement conical in shape at top,with CC 1 3 6 foundation using 40mm and down size graded metal ofapproved quality...
Construct WIRE CUT BRICK MACHINEHOLE CHAMBERS for 1.2mm dia 3.0m depth
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work.
Providing filling and laying of sand bags filled with sand/clay for diversion of sewage during execution of work
Dewatering the sewage storm water by using required HP submersible pump for the diversion of storm/sewage during the execution of work Fo 10HP Pump.
Dewatering the sewage/storm water by using required HP submersible pump for the diversion of storm/sewage during the execution of work Fo 20HP Pump
Providing and installing at site of work P V C pipes including cost of pipes and specials and labour including lowering into trenches laying true to line level and perfect linking at joints leak proof...
For 140mm Weight of pipe 2.131kg
For 160mm Weight of pipe 2 .753kg
Supply and delivery at site special moulded variety PVC bend as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments For 110mm dia PVC BEND
For 140mm dia PVC BEND
For 160mm dia PVC BEND
Supply and delivery at ite special moulded variety PVC tee as per IS 7834 1987 and fabricated as per IG1241984 with ISI mark with its latest amendments For 110mm dia PVC Tee
For 140mm dia PVC TEE
For 160mm dia PVC TEE
Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/1987 and fabricated as per IG124/1984 with ISI mark with its latest amendments For 110mm dia PVC SERVICE SADDLES...
For 140mm dia PVC SERVICE SADDLES.
For 160mm dia PVC SERVICE SADDLES.
Supplying of special moulded variety PVC couplers as per IS 7834/1987 and fabricated as per IG124/1984 with ISI mark and with its latest amendments to walk site etc For 110mm dia PVC couplers
For 140mm dia PVC couplers
For 160mm dia PVC couplers.
Providing pressure machinehole cover and frame in DI with SS 304 Nut Bolt arrangment with steel inserts)for the machinehole in storm water drain with necessary arrangements and complete in all respe...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid document.doc
Tender Document • 1.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .