REPAIR / REPLACEMENT OF JOINERY, SUNKEN FLOORS, FLOORING, TILING, SANITARY FITTINGS, PLUMBING, WATER PROOFING TREATMENT AND OTHERS MISC B/R WORKS IN OTM AREA UNDER AGE B/R-I AT GE KAMPTEE

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of old asbestos cement sheets complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws incl dismantling of old PGI sheets complete all as specified and as directed.

M&L for 4 mm thick Non Asbestos , fibre cement building board of size 595x595 mm size in ceiling fixed or laid / inserted to timber / GI/Aluminium framework with screws (Note : GI frame work will be measured and paid for seperately) incl dismantling of old wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and as directed. (Note : GI frame work will be measured and paid for seperately)

M&L GI powder coated snap grid framework for false ceiling comprising of the following section for making partion of 600 x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32 mm x 15 mm x0.30 mm, cross tee shall be 32 mm x 15 mm x0.30 mm thick with black lining in mid portion and wall angle shall be 24 mmx24 mm x0.30 mm thick complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces 350x450 x7/ mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10mm thick rendering or bedding layer of cement mortar 1:4 incl dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed

All as per item No 5 above but size 600x 1200x 8 to 10 mm thick as in vertical surfaces complete all as specified and as directed.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 incl 25mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished rough to receive floor/screed incl demolition of cement concrete floor 40mm thick complete all as specified and directed

M&L for Vitrified Ceramic tiles 8 to 10 mm thick light shade 600X600X 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc, including 15mm thick screed bed of cement mortar 1:6 incl roughening surface of old concrete/terrazo floor by peecking sweeping clean and washing down with water to remove dust etc complete all as specified and directed

All as per item No 8 above but size 600x 1200x 7 to 8 mm thick as in floors complete all as specified and as directed.

M&L for Virified Ceramic tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed