Development of lake S No 37/8 76 badagubettu grama in Uudpi CMC limit

Development of lake S No 37/8 76 badagubettu grama in Uudpi CMC limit

Clearing and grubbing road land including uprooting rank vegetation, grass,bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable m...

Removing silt and slush from dewatering pit, draft tube, tail race pond, cooling towers etc., by mechanical means/ manually including multiple handling wherever necessary and stacking etc., complete w...

Operating and Maintaining of Dewatering pump 5 hp diesel for Dewatering as per Instruction given by the site engineer in charge including Fuel charges and Crew charges complete as per specificationsPW...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering,

including cost of all materials and labour wi...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Coursed rubble masonry (second sort) with hard stone in

foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)PWD SR 2023-24 Vol 2 I.No 5.3P.No 9

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand)PWD SR 2023-24 Vol 2 I.No 5.3P.No 9

Providing Flush/ Ruled pointing: Pointing on stone work with cement

mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin

ing, including cost of materials, labour, curing as ...

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...

Providing and constructing load bearing wall with Solid Concrete blocks

of size 400x150x200mm having block density more than 1800kg/m3

and minimum compressive strength of 4.00 N/mm2 conforming to IS...

Providing 15 mm cement plaster on the rough side of single or half brick

wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners

wherever required smooth rendering, providing and re...

Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade :Two coats on new work after

thoroughly brooming the surface to remove all dirt, dust, mortar drops...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/

basalt crushed graded coarse aggregates and fi...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...