Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.3 LAccepted-AOC RAM SHIV COLONY GALI NO 2 NAIKA CHATNAG ROAD JHUNSI PRAYAGRAJ UP 211019 | PRAYAGRAJ | UTTAR PRADESH | 211019 | ₹20.3 L Quoted ₹20.8 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹20.9 LRejected-Finance CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | ₹20.9 L | L2 | Rejected-Finance Being L2 |
| 3 | L3₹24.7 LRejected-Finance 205 PARSHAV VIHAR PLOT NO 50 IP EXTN PARPARGANJ DELHI 110092 | SHAHDARA | DELHI | 110092 | ₹24.7 L | L3 | Rejected-Finance Being L3 |
| 4 | L4₹24.8 LRejected-Finance | ₹24.8 L | L4 | Rejected-Finance Being L4 |
| 5 | L5₹26.7 LRejected-Finance | ₹26.7 L | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | SANJEEV ENTERPRISES L3 | Ess Ess Engineers L7 | TARA ENTERPRISES L1 | Arun enterprises L5 | Pal Engineering Services L4 | Bharat Enterprises L6 | Jai Maa Electrical Works L2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Material and labour for conducting ‘B’ check of DG sets of 25 KVA to 62.5 KVA capacities to carry out maintenance/servicing as given below complete all as specified and directed.
(i) Change of diesel filter/oil filter, air filter, replacement of engine oil etc.
(ii) Check and clean engine, alternator battery, instrument panel, elect panel, Timer, Contactors ,Meters and others etc.
(iii) Tightening of all nuts & bolts of DG set and its accessories.
(iv) Check for any diesel leakage from any point and rectify if observed.
(vii) Check electrical connections of engine .The wiring shall be maintained properly and engine starting system from engine instrument panel is to be kept in order.
(viii) Check and tighten the AVM pads nuts and bolts, change AVM pads if found damaged. AVM to be provided by contractor.
(xiii) Oiling, Greasing and checking for proper & smooth functioning and testing on load complete
Note 1. :- Price for minor spare parts like nut bolts, grease, copper conductor cable for control wiring, AVM pads will be included in the quoted rates against each capacity.
2. Price for major spare parts diesel filter, oil filter, air filter, engine oil and coolant required for replacement shall be measured and paid for separately under respective item of schedule. | 5 | Each Job | 2,000 ₹10,000 | 1,450 ₹7,250 | 1,500 ₹7,500 | 2,404 ₹12,020 | 1,500 ₹7,500 | 1,800 ₹9,000 | 2,000 ₹10,000 |
| 2.00 | All as per serial item no 1 above but for 82.5 KVA to 125 KVA DG set -ditto- | 5 | Each Job | 3,000 ₹15,000 | 2,000 ₹10,000 | 1,500 ₹7,500 | 2,404 ₹12,020 | 1,500 ₹7,500 | 2,000 ₹10,000 | 2,500 ₹12,500 |
| 3.00 | All as per serial item no 1 above but for 180 KVA to 250 KVA DG set -ditto- | 4 | Each Job | 3,500 ₹14,000 | 2,600 ₹10,400 | 2,000 ₹8,000 | 2,404 ₹9,616 | 2,000 ₹8,000 | 2,500 ₹10,000 | 3,000 ₹12,000 |
| 4.00 | All as per serial item no 1 above but for 320 KVA to 400 KVA DG set -ditto- | 5 | Each Job | 4,000 ₹20,000 | 5,000 ₹25,000 | 2,500 ₹12,500 | 3,007 ₹15,035 | 2,500 ₹12,500 | 3,000 ₹15,000 | 4,000 ₹20,000 |
| 5.00 | All as per serial item no 1 above but for 600 KVA to 810 KVA DG set -ditto- | 2 | Each Job | 7,000 ₹14,000 | 6,500 ₹13,000 | 3,500 ₹7,000 | 4,006 ₹8,012 | 3,500 ₹7,000 | 5,000 ₹10,000 | 6,000 ₹12,000 |
| 6.00 | Supply only new fuel oil filter elements with 'O' ring for 25 KVA to 62.5 KVA DG Set complete all as specified and directed. | 5 | Each set | 485 ₹2,425 | 300 ₹1,500 | 600 ₹3,000 | 1,000 ₹5,000 | 500 ₹2,500 | 2,000 ₹10,000 | 800 ₹4,000 |
| 7.00 | All as per serial item no 6 above but for 82.5 KVA to 125 KVA DG set -ditto- | 5 | Each set | 485 ₹2,425 | 500 ₹2,500 | 800 ₹4,000 | 1,000 ₹5,000 | 500 ₹2,500 | 2,500 ₹12,500 | 1,000 ₹5,000 |
| 8.00 | All as per serial item no 6 above but for 180 KVA to 250 KVA DG set -ditto- | 4 | Each set | 1,200 ₹4,800 | 500 ₹2,000 | 1,000 ₹4,000 | 1,504 ₹6,016 | 800 ₹3,200 | 2,800 ₹11,200 | 1,000 ₹4,000 |
| 9.00 | All as per serial item no 6 above but for 320 KVA to 400 KVA DG set -ditto- | 5 | Each set | 2,850 ₹14,250 | 500 ₹2,500 | 1,800 ₹9,000 | 2,008 ₹10,040 | 2,000 ₹10,000 | 3,500 ₹17,500 | 1,250 ₹6,250 |
| 10.00 | All as per serial item no 6 above but for 600 KVA to 810 KVA DG set -ditto- | 2 | Each set | 3,100 ₹6,200 | 800 ₹1,600 | 2,500 ₹5,000 | 3,007 ₹6,014 | 2,000 ₹4,000 | 4,000 ₹8,000 | 2,000 ₹4,000 |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
22 Sept 2025, 6:00 pmClosed
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
REPAIR AND MAINT OF STAND BY DG SETS, CONTROL PANELS, SWITCH AMF PANELS AND OTHER CONNECTED WORKS AT TBRL RANGE RAMGARH AREA
2025_MES_727027_1
GE (I) R AND D/CHD-91/2025-26
Open Tender
Civil Works
180 days
Ramgarh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹74,000
Yes
28 Jan 2026
21 Aug 2025
25 Sept 2025
21 Aug 2025
22 Sept 2025
8 Sept 2025
Amount
Material and labour for conducting ‘B’ check of DG sets of 25 KVA to 62.5 KVA capacities to carry out maintenance/servicing as given below complete all as specified and directed. (i) Change of diesel filter/oil filter, air filter, replacement of engine oil etc. (ii) Check and clean engine, alternator battery, instrument panel, elect panel, Timer, Contactors ,Meters and others etc. (iii) Tightening of all nuts & bolts of DG set and its accessories. (iv) Check for any diesel leakage from any point and rectify if observed. (vii) Check electrical connections of engine .The wiring shall be maintained properly and engine starting system from engine instrument panel is to be kept in order. (viii) Check and tighten the AVM pads nuts and bolts, change AVM pads if found damaged. AVM to be provided by contractor. (xiii) Oiling, Greasing and checking for proper & smooth functioning and testing on load complete Note 1. :- Price for minor spare parts like nut bolts, grease, copper conductor cable for control wiring, AVM pads will be included in the quoted rates against each capacity. 2. Price for major spare parts diesel filter, oil filter, air filter, engine oil and coolant required for replacement shall be measured and paid for separately under respective item of schedule.
All as per serial item no 1 above but for 82.5 KVA to 125 KVA DG set -ditto-
All as per serial item no 1 above but for 180 KVA to 250 KVA DG set -ditto-
All as per serial item no 1 above but for 320 KVA to 400 KVA DG set -ditto-
All as per serial item no 1 above but for 600 KVA to 810 KVA DG set -ditto-
Supply only new fuel oil filter elements with 'O' ring for 25 KVA to 62.5 KVA DG Set complete all as specified and directed.
All as per serial item no 6 above but for 82.5 KVA to 125 KVA DG set -ditto-
All as per serial item no 6 above but for 180 KVA to 250 KVA DG set -ditto-
All as per serial item no 6 above but for 320 KVA to 400 KVA DG set -ditto-
All as per serial item no 6 above but for 600 KVA to 810 KVA DG set -ditto-
Supply only new lubricant oil filter cartridge element with 'O' ring for 25 to 62.5 KVA DG set complete all as specified and directed.
All as per serial item no 11 above but for 82.5 KVA to 125 KVA DG set -ditto-
All as per serial item no 11 above but for 180 KVA to 250 KVA DG set -ditto-
All as per serial item no 11 above but for 320 KVA to 400 KVA DG set -ditto-
All as per serial item no 11 above but for 600 KVA to 810 KVA DG set -ditto-
Supply only new air filter (both outer & inner) element with 'O' ring for 25 KVA to 62.5 KVA DG set complete all as specified and directed.
All as per serial item no 16 above but for 82.5 KVA to 125 KVA DG set -ditto-
All as per serial item no 16 above but for 180 KVA to 250 KVA DG set -ditto-
All as per serial item no 16 above but for 320 KVA to 400 KVA DG set -ditto-
All as per serial item no 16 above but for 600 KVA to 810 KVA DG set -ditto-
Supply only of Engine oil (15W40 or eq.) grade for DG set complete all as specified and directed.
Supply only coolant of specific grade for DG set complete all as specified and directed.
Supply only for filling of distilled water for battery complete all as specified and directed.
Taking down and dismantling all the components from engine assembly of 25 KVA to 62.5, diesel engine, segregating serviceable and semi/unserviceable parts, decarbonisation, cleaning all interior & exterior parts after disconnecting the out-going connection of diesel engine from the panel board, repair /replacement of defective spares and re assembling the DG set after completion of work and make it serviceable complete all as specified and directed. Note: (i) Spare parts/ components measured and paid for separately under relevant items. (ii) Cost of transportation of defective components from site of work to workshop (if any) shall deemed to be included in the unit quoted rate
All as per serial item no 24 above but for 82.5 KVA to 250 KVA DG set -ditto-
All as per serial item no 24 above but for 320 KVA to 400 KVA DG set -ditto-
Repair/re-conditioning of cylinder head (as dismantled under serial item No. 24 above) including machine work of 25 KVA to 62.5 KVA DG set complete all as directed.
Repair/re-conditioning of cylinder head (as dismantled under serial item No. 25 above) including machine work of 82.5 KVA to 250 KVA DG set complete all as directed.
Repair/re-conditioning of cylinder head (as dismantled under serial item No. 26 above) including machine work of 320 KVA to 400 KVA complete all as directed.
Repair/re-conditioning of cooling pump with its all assembly, pipes and clamping ring, engine mounted (as dismantled under serial item No. 24 to 26 above) including machine work of any capacity complete all directed.
Repair/overhauling turbo-charger (as dismantled under serial item No. 24 to 26 above) including repair/replacement of unserviceable spares of any capacity complete all as specified and directed.
Repair/calibration and testing of injectors (as dismantled under serial item no. 24 to 26 above) of any capacity complete all as directed.
Overhauling and testing of governor assembly (as dismantled under serial item No. 24 to 26 above) of any capacity Including machine work complete all as specified and directed.
Material and labour for repair of fuel injection pump/pt pump including dismanting the fuel injection/ pt pump, segregating serviceable and semi/unserviceable parts, replace all unserviceable parts and cleaning serviceable parts, drying, lubricating, re-assembling the FIP/PT pump with cleaned serviceable parts along with new parts as required , calibration, testing complete on computerised testing equipment all as directed.
Supply only piston suitable for DG engine 25 KVA to 62.5 KVA complete all as specified and directed.
Supply only cylinder liner suitable for DG engine 25 to 62.5 KVA complete all as specified and directed
Supply only piston ring set suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only piston pin suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only piston circlips suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only O seal ring, first groove suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only O seal ring, 2nd & 3rd groove suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only main bearing upper & lower suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only oil seal ring suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only radiator cap suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only thrust bearing suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only inlet/exhaust valve suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only inlet/exhaust valve seat ring suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only valve guide suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only valve collet suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only valve stem cap suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only valve seal suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only washer for cylinder head cover suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only seal ring (rocker arm) suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only water drain cock sub assembly suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only front oil seal suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only rear oil seal suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only connecting rod bearing suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only connecting rod bush suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only oil sump washer suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only inlet pipe for feed pump suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only v-belt suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only copper washer suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only HCT switch suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only thermostat body suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only radiator water inlet hose suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only radiator water outlet hose suitable for DG engine 25 to 62.5 KVA complete all as specified and directed
Supply only thermostat element suitable for DG engine 25 to 62.5 KVA complete all as specified and directed.
Supply only piston suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed
Supply only cylinder liner suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed
Supply only piston ring set suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only piston pin suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only piston circlips suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only o seal ring, first groove suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only o seal ring, 2nd & 3rd groove suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only main bearing upper & lower suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only oil seal ring suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only radiator cap suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only thrust bearing suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only inlet/exhaust valve suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only inlet/exhaust valve seat ring suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only valve guide suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only valve collet suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only valve stem cap suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only valve seal suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only washer for cylinder head cover suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only seal ring (rocker arm) suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only Water drain cock sub assembly suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only front oil seal suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only rear oil seal suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only connecting rod bearing suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only connecting rod bush suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only oil sump washer suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only inlet pipe for feed pump suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only v-belt suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only copper washer suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only HCT switch suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only thermostat body suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only radiator water inlet hose suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only radiator water outlet hose suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only thermostat element suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed.
Supply only piston suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed
Supply only cylinder liner suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed
Supply only piston ring set suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only piston pin suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only piston circlips suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only o seal ring, first groove suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only o seal ring, 2nd & 3rd groove suitable for DG engine 320 KVA to 400 KVA KVA complete all as specified and directed.
Supply only main bearing upper & lower suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only oil seal ring suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only radiator cap suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only thrust bearing suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only inlet/exhaust valve suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only inlet/exhaust valve seat ring suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only valve guide suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only valve collet suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only valve stem cap suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only valve seal suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only washer for cylinder head cover suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only seal ring (rocker arm) suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only water drain cock sub assembly suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only front oil seal suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only rear oil seal suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only connecting rod bearing suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only connecting rod bush suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only oil sump washer suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only inlet pipe for feed pump suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only v-belt suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only copper washer suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only HCT switch suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only thermostat Body suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only radiator water inlet hose suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only radiator water outlet hose suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Supply only thermostat element suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed.
Dismantling of self-starter 24V DC by disconnecting battery connection, taking out to civil workshop for carrying out following repair work and refixing including testing complete: - (i) Rewinding of armature & field coil. (ii) Replacement of carbon brush and solenoid switch (iii) Replacement of gear assembly all as specified and directed.
Dismantling of self-starter 12V DC by disconnecting battery connection, taking out to civil workshop for carrying out following repair work and refixing including testing complete: - (i) Rewinding of armature & field coil. (ii) Replacement of carbon brush and solenoid switch (iii) Replacement of gear assembly all as specified and directed.
Material and labour for repair of alternator 3 phase 440V of any capacity DG set, including dismantling the alternator from its mounting by unscrewing the nut & bolts. cleaning the whole assembly of alternator, replace the commutator, carbon brush, rectifier, slip rings, slip ring end bearing drive end bearing etc and re-assembling the all parts and mounted the alternator on its same place and do the connection as previous complete all as specified and directed .
Dismantling of defective dynamo from engine, supply and fixing new dynamo 24 volt DC, including replacement of worn out nuts bolts mounting clamp etc. complete all as specified and as directed.
Supply and replacement self-starter 12 volts DC suitable for DG Set 63/82.5/110 KVA complete all as specified and directed.
Supply and replacement self-starter 24 volts DC suitable for DG set 125/200/250/320/400 KVA complete all as specified and directed.
Opening the coupling of DG set of capacity 82.5 to 400 KVA the outer cover and taking out the fly wheel ring and shifting to workshop for repair in and including replacement of fly wheel ring by pressing machine and reinstalled the same after repair to make it fully functional complete all as specified and directed.
Supply and replacement of compact type battery charger unit suitable for charging 01 battery ,12 V 180 AH complete all as specified and directed with 2m copper leads -02 Nos & brass clamps complete all as specified and directed
Material and labour cleaning of diesel tank of DG set of any capacity including replacement of worn out pipe line and measuring scale and fixing in original position and make it leak proof with necessary clamps complete all as specified and directed.
Supply and fixing battery 12V, 150 AH with 25 nos electro plates including battery lead positive & negative battery terminal complete duly charged . Make exide (brand : exide express) or equivalent all as specified and directed.
Supply and fixing battery 12V, 160 AH pulse ultra lite, maintenance free including battery lead positive & negative battery terminal complete duly charged . make - cummins part No. AX1012845 or equivalent complete all as specified and directed.
Supply and fixing battery 12V, 180 AH with 25 Nos electro plates including battery lead positive & negative battery terminal complete duly charged . Make Exide (brand : exide express) or equivalent complete all as specified and directed
Supply and fixing in repair automatic voltage regulator suitable for 25 KVA to 82.5 KVA as per sample complete all as specified and directed.
Supply and fixing in repair automatic voltage regulator suitable for 100 KVA to 250 KVA as per sample complete all as specified and directed.
Supply and fixing in repair automatic voltage regulator suitable for 320 KVA to 810 KVA as per sample complete all as specified and directed.
Repair to existing unserviceable automatic main failure (AMF) panel of any capacity installed at various locations by carrying out the following repair work: (a) Disconnecting the incoming power supply and taking out and dismantling the electrical components from the AMF panel of any make and replacement of unserviceable/burn out/defective parts and cleaning/servicing entire interior and exterior serviceable parts and refixing the same in existing position including connections, testing and commissioning etc complete all as specified and directed. (Note: (i) Spare/parts shall be measured and paid for separately as "supply only" under respective items here-in-below. (ii) fixing charge for spare/part, control wiring (copper conductor cable FRLS) of any size, cleaning of panel, replacement of unserviceable lock and any type welding work used for repair the panel shall deemed to be inclusive under this item.
Supply only MCB, SP, 6-32 amps, 'C' curve suitable for AMF panel 35-250 KVA complete all as specified and directed.
Supply only MCB, SPN, 6-32 amps, 'C' curve complete all as specified and directed.
Supply only MCB, TPN, 6-32 amps, 'C' curve complete all as specified and directed.
Supply only instrument operating relay, coil voltage 12 volts DC suitable for AMF panel complete all as specified and directed.
Supply only 3 pole power contactors type MNX-185 (185 amp) with suitable coil voltage or equivalent as per site requirement complete all as per Make : L & T or equivalent all as per specified and directed.
Supply only 4 pole power contactors type KCL64 225 (225 amp) with suitable coil voltage or equivalent as per site requirement complete all as per Make :Kirloskar or equivalent all as per specified and directed.
Supply only 3/4 pole power contactors MNX 400 (400 amp)with suitable coil voltage or equivalent as per site requirement complete all as per Make :L&T, GE, Havells, Kirloskar or equivalent all as per specified and directed.
Supply only digital panel meter with built in transducer suitable for AMF panel of any capacity complete all as specified and directed.
Supply only oil pressure meter suitable for AMF panel of any capacity complete all as specified and directed.
Supply only lubricant oil temp meter suitable for AMF panel of any capacity complete all as specified and directed.
Supply only heat temp meter suitable for AMF panel of any capacity complete all as specified and directed.
Supply only battery charging meter suitable for AMF panel of any capacity complete all as specified and directed.
Supply only current transformer, copper wound suitable for any capacity complete all as specified and directed.
Supply only relay timer 0.6 S-60M*2 C/O suitable for AMF panel of any capacity complete all as specified and directed.
Material and labour for replacement of AMF panel controller suitable of DG set of capacity 25 KVA to 125 KVA complete all as specified and directed.
Material and labour for replacement of AMF panel controller suitable of DG set of capacity 180 KVA to 380 KVA complete all as specified and directed.
Supply and fixing in replacement MCCB 125 amp 16 KA, 3 pole, adjustable type complete all as specified and directed.
Supply and fixing in replacement MCCB 160 amp 36KA,3 pole, adjustable type complete all as specified and directed..
Supply and fixing in replacement MCCB 200 amp 36KA, 3 pole, adjustable type complete all as specified and directed..
Supply and fixing in replacement MCCB 250 amp 36 KA, 4 pole, adjustable type complete all as specified and directed.
Supply and fixing in replacement MCCB 400 amp 36KA, 4 pole, adjustable type complete all as specified and directed.
Supply and fixing in replacement MCCB 630 amp 50KA, 4 pole, adjustable type complete all as specified and directed.
Supply and fixing of on-load type changeover switch 400 amp, 415 volt, open enclosure type complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider
Supply and fixing of on-load type changeover switch 250 amp, 415 volt, open enclosure type complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider
Supply and fixing of on-load type changeover switch 200 amp, 415 volt, open enclosure type complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider
Supply and fixing of on-load type changeover switch 100 amp, 415 volt, with SS enclosure type complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider
Supply, installation, testing and commissioning cummins power command controller (PCC 3300) Part No. A054J968 for DG set as per existing or equivalent. complete all as specified and directed.
Supply, installation, testing and commissioning cummins PCB assembly for DG Set Part No. 0327-1507 as per existing or equivalent. complete all as specified and directed.
Supply, installation, testing and commissioning cummins Aux 105 PCB board for DG Set Part No. A028T766 as per existing or equivalent. complete all as specified and directed.
Supply, installation, testing and commissioning cummins electronic control panel, genset Dg controller part no. 4083935 as per existing or equivalent. complete all as specified and directed.
Supply, installation, testing and commissioning cummins power command HMI 211,24V DC for DG set as per existing or equivalent. complete all as specified and directed.
Supply, installation, testing & commissioning AMF panel board for 250 KVA DG set indoor type, IP- 65 suitable for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet thickness not less then 2.0 mm, side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have frame work, bottom frame & 45 CM long four legs of size 50 x 50 x 6 mm Angle iron, including 600 Amp TPN aluminum busbar sleeved with heat shrink sleeve colmmour coated for 3 Phase, 4 wire electric supply system and control wiring with minimum size: 1.5 sqmm of copper cable complete comprising of following accessories all as specified and any other items required for smooth functioning of AMF Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge. (Note: AMF panel shall be mounted on PCC 1:2:4 type B-1 (with 20 mm graded stone aggregate) foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC foundation shall be deemed to be included in the unit rate quoted for the item.( Note:-All type Test Certificates and Design verification with switch gears as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.)”
Supply, installation, testing & commissioning AMF panel board for 82.5 KVA DG set outdoor type, IP- 65 suitable for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet thickness not less then 3.0 mm, side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have frame work, bottom frame & 45 CM long four legs of size 50 x 50 x 6 mm Angle iron, including 300 Amp TPN aluminum busbar sleeved with heat shrink sleeve colmmour coated for 3 Phase, 4 wire electric supply system and control wiring with minimum size: 1.5 sqmm of copper cable complete comprising of following accessories all as specified and any other items required for smooth functioning of AMF Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge. (Note: AMF panel shall be mounted on PCC 1:2:4 type B-1 (with 20 mm graded stone aggregate) foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC foundation shall be deemed to be included in the unit rate quoted for the item.( Note:-All type Test Certificates and Design verification with switch gears as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.)”
Jai Maa Electrical Works (BID ID -3431913)
SANJEEV ENTERPRISES (BID ID -3422939)
Pal Engineering Services (BID ID -3426067)
Arun enterprises (BID ID -3425925)
Bharat Enterprises (BID ID -3431004)
Ess Ess Engineers (BID ID -3424916)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid