8258 REPAIR REWINDING OF CEILING FAN EXHAUST FANs AND CERTAIN ALLIED EM WORKs SUCH AS DBs EARTHING ETC IN ND MB UNDER GE NW KUNJALI

Amount

Taking down of ceiling fan, any sweep/size at any height and Refixing complete all as specified and as directed.

M &L Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and as directed.

S & F in replacement of plastic body capacitor of 2.5 mfd capacity with wire , suitable for single phase motor and making connection complete all as directed. Make : Surya/Usha/TIBCON/Havells/Epcos.

Repairing of ceiling fan of any make, 1200 mm sweep dismantling its parts cleaning properly, rewinding with super copper enamelled wire suitable gauge, varnishing, oiling and greasing replacing petty items such as split pins, assembling and testing after fixing of fan blades, refixing at site and connecting complete all as specified and as directed.

Supply and fix in repair Ball bearing suitable for 1200mm sweep ceiling fan of SKF or NBC or equivalent.

Repairing of ceiling fan of any make, 1400 mm sweep dismantling its parts cleaning properly, rewinding with super copper enamelled wire suitable gauge, varnishing, oiling and greasing replacing petty items such as split pins, assembling and testing after fixing of fan blades, refixing at site and connecting complete all as specified and as directed.

Supply and fix in repair Ball bearing suitable for 1400mm sweep ceiling fan of SKF or NBC or equivalent.

Taking down Exhaust fan at any height,any size, sealing cable end, dismantling complete all as specified and as directed.

M &L Painting of Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

Repairing of Exhaust fans 300 mm sweep and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, varnishing of winding, cleaning dust, rust & assembling and refixing at site complete all as specified.

Repairing of Exhaust fans 380 mm sweep and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, varnishing of winding, cleaning dust, rust & assembling and refixing at site complete all as specified.

Repairing of Exhaust fans 450 mm sweep and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, varnishing of winding, cleaning dust, rust & assembling and refixing at site complete all as specified.

Repairing of Flame Proof Exhaust fans 300 mm sweep and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, varnishing of winding, cleaning dust, rust & assembling and refixing at site complete all as specified.

Repairing of Flame Proof Exhaust fans 450 mm sweep and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, varnishing of winding, cleaning dust, rust & assembling and refixing at site complete all as specified.

Supply and fix in repair Ball bearing suitable for 300 mm sweep Exhaust fan of SKF or NBC or equivalent.

Supply and fix in repair Ball bearing suitable for 380 mm sweep Exhaust fan of SKF or NBC or equivalent.

Supply and fix in repair Ball bearing suitable for 450 mm sweep Exhaust fan of SKF or NBC or equivalent.

Taking down Air circulaor & wall fan any sweep any size at any height and Refixing complete all as specified and as directed.

Repairing of Air Circulator fans 450 mm size and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, varnishing of winding, cleaning dust, rust & applying one coat grey enamel paint, assembling and refixing at site complete all as specified.

Repairing of Air Circulator fans 600 mm size and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, varnishing of winding, cleaning dust, rust & applying one coat grey enamel paint, assembling and refixing at site complete all as specified.

Repairing of wall fan of 400 mm sweep dismantling its parts cleaning properly rewinding with super copper enamelled wire suitable gauge, varnishing, oiling and greasing replacing petti items such as split pins, cleaning of fan body and its blade by cleaning agent assembling and testing after fixing of fan blades, refixing at site and connecting complete all as specified and as directed.

M &L Painting of Air Circulator complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and as directed.

Supply & Fix metal louvers suitable for 300 mm Exhaust fan at any heightcomplete all as specified and as directed.

Supply & Fix in repair metal louvers suitable for 380 mm Exhaust fan at any heightcomplete all as specified and as directed.

Supply & Fix in repair metal louvers suitable for 450 mm Exhaust fan at any heightcomplete all as specified and as directed.

Supply & Fix and Replacement of 15 mm dia clamp assembly with nut bolts & rubber bush suitable for downrods and split pins as approved by Engr -in -charge.

Supply & Fix and Replacement of 15 mm dia canopy suitable with fixing nut bolt as approved by Engr -in -charge.

Supply & fixing ceiling fan down rod of length 300 mm inner diameter 15 mm and thicness not less than 1.5 mm with clamps nuts,bolts and washers for existing ceiling fan as approved by Engr-in-charge.

Supply & fixing ceiling fan blade suitable to any size and make complete all as specified and directed .

S&F Flame Proof Junction Box with Plain cover 3/4" ET Dia 80 CAT NO- JB/OA/104 of Sudhir or it's equivalent from Baliga/Shyaam

S&F Flame Proof Switch socket & plug combined in LM6 cabe termination box in LM6 16 Amps 250 V multi 3 pin 5 and 3 pin 16 A rotary type with termination box in LM6 single pole 250 V, complete all as specified and as directed.

S&F Flame Proof Switch socket - weather proof MCB socket & plug combined 32 A, 250 V(2P+Earth) and 9 KA complete all as specified and as directed.

S&F Flame Proof Switch rotary type with termination box in LM6 single pole 250 V, complete all as specified and as directed.

Supply & fix wall fans 230 volts single phase oscillating 400 mm sweep, 1360 RPM, 50 watt, 72 Air del cum /min suitable for wall mounting complete all as specified and as directed. Make: PLATINA Model of Havells or equivalent Model in Bajaj and Khetan

Supply & fix wall Air Circulator fans 230 volts single phase oscillating 600 mm sweep, 50 C/S, 180 watt, 280 Air del cum /min suitable for wall mounting complete all as specified and as directed. Make: TURBOFORCE Model of Havells or equivalent Model in Bajaj and Khaitan

S & F exhaust fan of sweep 380 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

S & F exhaust fan of sweep 300 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

S & F exhaust fan of sweep 225 mm mounted on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and completed all as specified and directed. Make: Havells/CG/ khaitan

S & F Ceiling fan 5 Star Rated 1200 mm sweep heavy duty type complete with and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by completed all as specified and directed. Make: Havells/CG/ khaitan

Taking down old u/s MCB DBs complete with MCBs, isolator etc of any type and capacity from wall/ceiling etc & making good to the disturb surfaces all as directed by engineer in charge all as specified

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 12 or equivalent Cat part in Siemens/C&S

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 11 or equivalent Cat part in Siemens/GE

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 10 or equivalent Cat part in Siemens/GE

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting DP enclosure, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5077 91 or equivalent Cat part in Siemens/GE

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting TPN 4 way, 440 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand cat No 5077 55 or equivalent in Siemens/GE NOTE FOR ITEM No. 41 to 45 : MCB DBs shall be concealed in wall where ever posible including cost of removing old wooden box making good the surface to match with surrounding deemed to be included in quoted rates

S &F in repair LED Street light 48 Watt Energy Saving and Environment friendly light fitting with 24 nos LED Light source lumens with electronic gear housed in Pressure diecast alluminium alloy LM6 with IP65 protection operating volt up to 265 volts including suitable size of pipe bracket clamp for fixing complete all as specified and dierected . Make -Havells cat part No- ENDURACITYLINERNEXGENSL48WLED757SAYSBOPC or equivalent cat part in Crompton / Wipro / Philips

M&L for sub-main wiring with 2 runs of 4.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza

M&L for sub-main wiring with 2 runs of 6.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza

S &F in repair 90Watt, LED Bldg security light, PDC aluminium housing top maintainable with sealed toughened glass cover, SMD LED with secondary lens including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make- C & S cat part No. LTESST90WLED/LS, (Indus series), bajaj,cat part no- BRTFG 90W LED I V2 or equivalent cat part in Crompton / Wipro / Philips

Dismantling/Taking down old U/S light fittings removing from site and making good the distrubed surface matching with existing surface all as per directed.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, (Make: Havells/ Finolex/ Plaza) drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of PVC modular box with cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point controlled by one 5A switch

One Fan point controlled by one 5A switch

One Bell point controlled by one bell push

One 5A flush type switch socket point on same board

One 5A flush type switch socket point on independent board

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC modular box with cover plate for15 amp swich socket on independant board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Switch socket measured & paid separately.

S & F modular switch 1 way 6A, 1 module complete all as specified and directed. Make: Anchor/Roma/Legrand.

S & F in replacement of Bell push modular type 5/6 Amps, 240 volts SP complete all as directed. Make: Anchor/Roma/Legrand.

S & F modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed. Make: Anchor/Roma/Legrand.

S & F in replacement of lamp holder PVC/polycarbonate insulated body type complete all as directed.

S & F modular switch socket combination 6/16A, 2/3 pin, combined 2 module complete all as specified and directed. Make: Anchor/Roma/Legrand.

S&F for modular fan step regulator, 120W - 2 modular complete all as specified and directed. Make: Anchor/Roma plus/Legrand

S & F in replacement of bell, DINGDONG type, 6 Amps, 240 volts, SP complete all as directed.

S & F in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed. Make - Legrand cat part No 5078 11 or equivalent Cat part in siemens/C&S

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed.

S & F MCB SP 6-32 Amps,10KA, 'C' series 240V complete all as specified and directed. Make: Legrand cat No 4085 85-95 or equivalent Cat part in Seimens/C&S.

S & F MCB SPN 40 Amps,10KA 'C' Curve 240V complete all as specified and directed. Make: Legrand cat No 4086 18 or equivalent Cat part in Seimens/C&S.

S & F MCB SPN 63 Amps,10KA 'C' Curve 240V complete all as specified and directed. Make: Legrand cat No 4086 20 or equivalent Cat part in Seimens/C&S.

S & F in repirs LED light fitting 20W, 230 V, 4 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB4F20WLED/W (Nakshatra series) , or equivalent cat part in Crompton/Wipro /Philips

S & F in repair of Triple pole and neutral enclosure with a three pin and earth plug and socket complete with one single pole MCB 63A complete all as specified and directed. Make :Legrand cat No 5078 64 or equivalent cat No. in GE/Seimens/C&S

Supply and fixing walll/surface mounted 10W LED, 2 feet batten fitting engineering plastic battern with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core copper conductor cable with suitable size and all as directed. Make : C&S cat part No. LTTB2F10WLED/W or equivalent in CG/ Wipro/ Bajaj / Philips

S &F in repair LED Bldg Security Light 25 watt (INDUS-E SERIES) Power coated pressure die cast aluminium SMD LED Street Light with integraed lens complete all as specified directed. Make-Bajaj cat part No-BRLEP 25W LED WH, C&S Cat part No- LTESSE25WLED or equivalent cat part in Crompton / Wipro / Philips

Supply and fixing in repair Recessed full / Surface type LED 2X2 Luminaire 36 watt and CRCA powder coating housing with anti-glare diffuser, New deep back lit type surface mounting LED Luminaire provides high quality ecomonic energy saving lighting suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and as directed. Make: Crompton cat No LCTLSN-36-CDL(2X2) / C&S cat No LTCSP36WLED2X2 or equivalent Cat part in Surya / Philips

Supply and fixing in repair Ultra slim edge lit type recess mounting LED 2X2 Luminaire 36 watt and extruded aluminium housing with anti-glare diffuser provides high quality ecomonic energy saving lighting LED Luminaire suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and as directed. Make: Crompton cat No LCPL-36-CDL(2X2) / C&S cat No LTCRSLM36WATT 2X2 or equivalent Cat part in Surya / Philips

Supply & Fix LED Slim down light, CARINA SERIES CARINA-RND/6W/W LED 6 watt white LED Round Recess PDC Aluminium Housing Downlights,warm light all as specified directed. Make -C&S cat part no-LTCRSM6HPLEDRND/W or equivalent Cat part in Surya / Philips

Supply & Fix LED Slim down light, CARINA SERIES CARINA-SQ/6W/W LED 6 watt white LED Square Recess PDC Aluminium Housing Downlights,warm light all as specified directed. Make -C&S cat part no-LTCRSLM6HPLED/SQ/W or equivalent Cat part in Surya / Philips

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6sq mm 2 core. laid in duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected and incl galvanised earth lead wire 4.0mm dia by means of nuts & bolts, check nuts and wassher of galvinsed incl PCC (1:2:4) type B-1 cover reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25mm x 25mm x 3mm excavation and earth work in any type of soil, charcoal dust, salt light grade GI watering pipe 20mm dia with funnel and wire-mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distrubution board complete all to as shown in electrical plate No 3 of MES sch 2009 (part-I) connected main switch board all as specified and testing on completion .

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised iron strip 25×4mm as earthing lead by means of nuts & bolts, check nuts and wassher of galvinsed incl PCC (1:2:4) type B-1 cover reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25mm x 25mm x 3mm excavation and earth work in any type of soil, charcoal dust, salt light grade GI watering pipe 20mm dia with funnel and wire-mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distrubution board complete all to as shown in electrical plate No 5 of MES sch 2009 (part-I) connected main switch board all as specified and testing on completion .

siddharth and company

NOEL ENGINEERS

DHARMESH ENTERPRISES