Renewal of Painted Road From Km. 4.050 to Km. 6.600 Left bank and Km. 6.600 to Km. 10.600 Right bank of Gilaula Escape Channel in District Shrawasti

Amount

Granular Sub Base with well Graded Material (Table 400.1) :- Construction of granular sub base ( grading -1) by providing well graded material, spreading in uniform layers with motor grader on prepared surface , mixing by mix in place method with rotavater at OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. But Excluding cost of GST.

W.B.M. Grading-2 :- Providing, Laying, Spreading and Compacting stone aggregated of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 Kn in stage to proper grade and camber , applying and brooming , stone screening to fill up the interstices of coarse aggregate watering and compacting to the required density grading-3 as per Technical specification Clauses 405. But excluding cost of GST.

W.B.M. Grading-3 :- Providing, Laying, Spreading and Compacting stone aggregated of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 Kn in stages to proper grade and camber, applying and brooming , stone screening to fill up the interstices of coarse aggregate watering and compacting to the required density grading-3 as per Technical specification Clauses 405. But Excluding cost of GST.

Prime Coat :- Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.00 Kg/ Sqm using mechanical means as per Technical specification clause 502. But Excluding cost of GST.

Tack coat :- Providing and applying Tack coat with bitumen (VG-10) using rate of 0.35 to 0.45 Kg per Sqm on the prepared granular surface treated with primer & cleand with Hydraulic broom as per as per Technical specification clause 503. but Excluding cost of GST.

Open Graded Premix Carpet 20 mm thick :- Providing, Laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.20 mm to 5.60 mm aggregate either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in Hot Mix plant, laying by Pavar Finisher and rolling with a three wheel 80-100 KN Static roller capacity, finished to the required level and grades to be followed by seal coat of "Type B" as per Technical specification Clauses 508. But Excluding cost of GST.

Seal Coat :- Providing and Laying seal coat sealing the voids in a bitumenous surface laid to the specified levels, grade and cross fall using type "B" as per Technical specification clause 510. But excluding cost of GST.

Brick on Edging :- Brick on Edging with class 150 brick laid on edge on both side of the road in mud morter including cost of all material, labour, T&P etc. required for proper completion of work. But excluding cost of GST.

Road Marking with hot applied Thermoplastic compound with reflectorising glass beads on Bituminous Surface :- Providing and Laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area , thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level uniform and free from streaks and holes. But excluding cost of GST.

Earth work :- Earth work in cutting or in embankment in ordinary soil , excavation to be made in the form of regular pits not exceeding 1/2 m in depth and earthwork in embankment to be 20cm layers including ramming, dressing the surface to the required level and slope and also including lead upto 30 m and lift upto 1.50 m the earth from cutting to be deposited as spoil banks with in 30 m distance as directed by Engineer- in- charge . S.I. NO. 253. But excluding cost of GST.

vineet dixit