CWE/CHM-85/2021-22 MANUFACTURE AND SUPPLY OF FURNITURE FOR CMDC (WC) AT GE CHANDIMANDIR

Amount

STEEL FURNITURE (PART-I)

Almirah (Small) Steel with Shelves (FD-1032). All dimension, shape and size shall be followed as per drg. (i) Steel Almirah (body, shutter, drawer, locker, vertical partitions and shelves) shall be made out of 1mm MS plain black sheet all as shown on drawings. (ii) All joints/welding/fixing shall be done all as shown on drawings and with standard workmanship. (iii) Almirah shall be provided with three way locking device as per ‘Godrej’ pattern .The handle shall be made out of steel chrominium plated as per ‘Godrej’ pattern. Six lever brass lock shall be provided as per Godrej pattern of make Godrej, Link, Harrison. (iv) One steel chrominium plated handle shall be provided to the drawer. (v) Locker of the almirah shall be provided with locking arrangement operated with handle as per Godrej pattern. (vi) All steel surfaces internally and externally shall be painted with two coats of synthetic enamelled paint (silver grey colour) with spray gun over a coat of zinc chromate steel primer. (vii) The welding joints shall be filed smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to application of paint. (xiii) Rest all as shown on drawing No FD1032 complete all as specified and directed.

Almirah Large Steel with Shelves (FD-1031). All dimension, shape and size shall be followed as per drg. (i) Steel Almirah (body, shutter, drawer, locker, vertical partitions and shelves) shall be made out of 1 mm thick mild steel sheet all as shown on drawings. (ii) All joints/welding/fixing shall be done all as shown on drawings and with standard workmanship. (iii) Almirah shall be provided with three way locking device as per ‘Godrej’ pattern .The handle shall be made out of steel chrominium plated as per ‘Godrej’ pattern. 4 lever brass lock 65 mm size shall be provided as per Godrej pattern, of make GODREJ, LINK, HARRISON.(iv) Almirah shall be provided with three numbers adjustable shelves with four compartments (v) One steel chrominium plated handle shall be provided to the drawer. (vi) All steel surfaces internally and externally shall be painted with two coats of synthetic enamel paint (olive green) with spray gun over a coat of zinc chromate steel primer. (vii) The welding joints shall be filed smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to application of paint. (viii) Rest all as shown on drawing No FD-1031 complete all as specified and directed.

Bed Map Steel (FD/E6/MAP/08(R)). (i) Bed hard shall be manufactured all as per details shown in the drawing. All dimensions, shape and size shall be followed as per drawing. (ii) All square and rectangular MS pipes shall be of thickness 18 gauge.(iii) Top of bed shall be of 12mm thick commercial plywood (unpolished) as per IS-303. (iv) Head board and foot board shall be of 18-19mm thick Prelaminated particle board (both side decorative finish shade as approved by GE) as specified here-in- before, screwed to MS strip all as per details shown in drawing. Standard PVC edging (minimum thickness 1.6mm) shall be provided alround in Head board and foot board. (v) Hard rubber/PVC shoe shall be provided to the bottom of each leg. (vi) All exposed steel surfaces shall be painted with two coats of synthetic enamel olive green paint over a coat of zinc chromate steel primer. The welding joints shall be filed smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to application of paint. (vii) Rest all as shown on drawing No FD/E6/MAP/08(R) complete all as specified and directed.

BOOK CASE STEEL (DRG NO FD-1028) Item to be fabricated as per drg. Overall size shall be 840mm long, 310mm wide and 1675mm, cold rolled, cold annealed MS sheet 1mm thick to be used for channel base, top, sides, back, bottom, front and shelves. The book case shall be provided with four compartments of equal size. The shutters of each compartment shall be open towards top and slide into the depth of the book case. Two steel handles of 100mm shall be provided to each shutter of the compartment. The locking device shall be provided to each compartment and with duplicate key and each shutter shall be provided with decorative key plate make of lock Godrej/Harrison/Link. All joints and welding, fixing shall be done in accordance with standard workmanship. Rest all as shown on drawing. Finish. All steel surfaces internally and externally shall be painted with two coats of silver hammer paint over a coat of primer with spray machine after preparation of surfaces. A mark of MES shall also be provided on tip shutter of visible colour as directed by Engineer-in-Charge.

Charpoy with Hard Top (FD/MAP-II/01). All as per drawing and as make approved by GE.

Chair Writing (Map) (FD/E6/MAP/12) (a) All work shall be of Standard class. All dimensions shape and size shall be followed as per Drawing. (b) Back form shall be with cuntoured Lumber support for extra comfort. (c) 120 mm thick hot pressed ply wood upholstered with fabric and moulded polyurethane foam wiht PVC lipping all round. Fabric shall contain the acrylic, polyster, poly proplyene material and colour as approved by the GE. (d) Polyurethane foam shall be 50mm thick and shall be moulded with density 50 -55kg/cum thick and hardness 20+/- 2kg on Hampde Machine. (e) Legs shall be cantilever type powder coated MS tublar frame made out of 25mm x 10mm Section. (f) All joint fixing shall be done in accordance with standard workmanship and specification. (g) Rest all as shown on drawing No FD/E6/MAP/12 complete all as specified and directed.

CHAIR VERANDAH (DRG NO FD-359) (i) Over all size shall be 460mm long, 600mm wide and 760 mm high. (ii) Frame of Chair verandah shall be made of 20mm dia MS conduit (16 gauge). 10mm MS round bar rod shall be welded to legs all as shown in the drawing. (iii) Seat and back of Chair verandah shall be woven with plastic cane 4mm of approved quality of make as specified here-in-before and shall be screwed at both ends as per trade practice. (iv) All joints/welding/fixing shall be done in accordance with standard workmanship and all as shown on drawings. (v) FINISHES: All exposed steel surfaces shall be painted with two coats of synthetic enamel white paint over a coat of zinc chromate steel primer. The welding joints shall be filed smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to application of paint. (vi) Rest all as shown on drawing.

Desk Stand Lecture (DRG NO FD-1022) DIMENSION :Over all size shall be 970mm wide and 1220mm high. DESCRIPTION: Two upright of mild steel rectangular tube of 75mmx25mm of 1202mm high shall be provided in rear side and shall be 635mm apart. The two upright shall be joinded with bottom, middle and top rails with 75mmx50mm mild steel tube of wal thickness 1.6mm. The two sides rails at bottom fixed at 125mm from bottom shall be 430mm long 75mmx50mm mild steel tube of wall thickness 1.6mm and shall form the part of bottom rails and join the long side of bottom rail of size 785mm long, . All edges of pre-laminated particle board remained exposed shall be covered with teak wood edging as per the size of board edging. FINISH : All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces and all wooden surfaces shall be melamine polish with lacquer finish as approved by Engr-in-Charge.Rest all as per drgs.

Table Office Clk Steel (Drg No FD-1004) All as per drawing and as make approved by GE.

Table Pantry Steel (DRG NO FD-1020) DIMENSION : Over all size shall be 900mm long, 550mm wide and 840mm high. DESCRIPTION: Steel of size frame shall be 880mm x 815mm. Legs shall be four in numbers. Legs shall be of 25mm square mild steel tube of wall thickness. All steel sheet used for drawes and side overing of drawer and for support of drawer shall be mild steel and 1mm thick. Top of table shall be 25mm thick polished Kota Stone Slab in one piece. Legs shall be provided with hard rubber/PVC toes at bottom. FINISH : All steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internallly and extrenally with spray machine after preparation of surfaces. A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spary machine. Rest all as per drgs.

Table Cook Steel (Drg NO FD-1019) DIMENSION: Over all size shall be of 900x540x840mm. DESCRIPTION :All steel used in the manufacturing of frame structure shall be of 25mm square MS with wall thickness 1.6mm .Top shall be of 25mm thick marble stone slab duly finished and rounded edges.6mm dia MS lugs (04 in nos) shall be provided at top of upper rails through welding for the support of stone top.Hard rubber toes shall also be provided to bottom of each leg.All Dimensions, shape and size shall be followed as per drg. All joints, fixing shall be done in accordance with standard specifications. Rest all as shown on drg. FINISH: All steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internally and extrenally with spray machine after preparation of surfaces.A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine.Rest all as per drg.

Teapoy Verandah (FD/E6/MAP/17). All dimension, shape and size shall be followed as per drg. (i) Frame, stiffeners, legs ,etc. shall be made of 18mm square MS pipe of thickness 18 gauge. (ii) Top of Teapoy shall be of 18-19mm thick Prelaminated particle board (one side decorative finish shade as approved by GE and other side white balancing lamination. (iii) Base tray made with 5mm dia mild steel bar (12 x 10Nos equidity distance) shall be provided. (iv) 4mm thick teak wood edging shall be provided alround. (v) FINISHES: All steel surfaces, exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of surface. (vi) Rest all as shown on drawing No FD/E6/MAP/17 complete all as specified and directed.

Wooden Furniture (PART-II)

Chair Dining with Cushion (FD/E6/MAP/10) All dimension, shape and size shall be followed as per drg. (a) All wood work shall be of 1st class hard wood (Teak). (b) Seat shall be 75MM thick foam of 40 density covered with good quality tapestry cloth (cost of cloth not less than Rs 450/- per meter) as approved by GE over 12MM thick commercial plywood as per IS- 303. (c) Nylon buffers of appropriate size shall be screwed to the bottom of each leg. (d) All exposed surfaces of timber and plywood shall be french polished. (e) All joint fixing shall be done in accordance with standard workmanship and specification and all as shown on drawing. Rest all as per drg No FD/E6/MAP/10 complete all as specified and directed.

Hat Stand with Mirror (Small) (FD-361) Dimenson. Overall size shall be 1000mm long and 710mm high. Desciption : The inner frame shall be of 50mm x 20mm teak wood battens six in Nos. The back and font of frame shall be covered with 6mm thick commercial ply. The edges of the frame shall be covered with 6mm x 35mm leak wood edging fixed alround the frame with headless nails and adhesive. Four brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg 5mm thick looking miror of (saint gobian, Modiuard/Autal) shall be provided as shwon on drg with beading alround. Mild steel key plate shall be provided at both top corners of the hat stand. FINISH : All teak wood surfaces shall be given high gloss French polish with lacquer fiinish. All steel surfaces ahll be painted with two coats of enamel paint over a coat of pumer. Rest all as per drgs.

Hot Case Large (FD-364) Overall size shall be 1350mm long, 540mm wide and 1140mm high. All wood shall be of first class hard wood teak (MP). Legs shall be 45mm x 45mm in section at top complete all as specified and directed. Rest all as per drg No FD-364 complete all as specified and directed.

Stool dressing with cushion (DRG NO FD/E6/MAP/14) (a) The plywood 12mm thick wherever shown on drawing shall be 18/19 MM thick decorative type with Prelaminated partical board finish on one side. (b) The seat shall be removable type made of 75MM thick synthetic foam of 40 density covered with tapestry cloth of shade and texture as approved by GE. The tepestry cloth shall be coating not less than Rs 450/- per runing meter. (c) All expoased edges of particle board shall be provided with 4MM thick teak wood edging unless otherwise shown on drawing. (d) All exposed surfaces of wood and wood based material shall be French polished. (e) Rest all as shown on drawing and as directed by GE/ Engr -in-charge.

Side Board (FD-241) All side shall be made out of Prelaminated particale board 19mm thick. Top shal be made prelaminated particle board 19mm thick. All wood surfaces exposed to view shall be french polished with high gloss finish, complete prelaminated particle board 19mm thick complete all as specified and directed. Rest all as per drg No FD-241.

Magzine Rack Medium (FD-365) All as per drg and as make approved by GE.

Teapoy Wooden (FD-278) All as shown on drg. Overall size of Teapoy wooden shall be 600mm long, 450mm wide 540mm high. All wood shall be of Ist class teak wood. Top of table shall be made out of prelaminated particle board 18/19mm thick exterior grade and 4mm thick teak wood beading shall be provided all round the table irrespective of what is shown on drg. Rest all as per drg No FD-278 complete all as specified and directed.

Table dressing ladies with mirror (FD-251) All dimension, shape and size shall be followed as per drg. All wood shall be of Ist class hard wood teak .The bottom side and other side of dressing table shall be of 18/19 mm thick prelaminate particle board. Top shall be of 18/19 mm thick prelaminated particle board. Frame work of mirror shall be of Ist class teak wood back shall be of ply wood 6 mm commercial ISI marked, Mirror shall be 5 mm thick ISI marked. Make of mirror shall be Atul/Modi/Saint Gobin. All wooden surfaces shall be French polished to a glossy finish. Rest all as per drg No FD-251 complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR (DRG NO FD-379) All wood shall be of Ist class hard wood teak .The bottom side of dressing table shall be of 18/19 mm thick prelaminated partical board. Top shall be of 19 mm thick commercial particle board . Frame work of mirror shall be of Ist class teak wood back shall be of ply wood 6 mm commercial ISI marked, Mirror shall be 5 mm thick ISI marked. Make of mirror shall be Atul/Modi/Saint Gobin. All wooden surfaces shall be French polished to a glossy finish and all as per drg No FD-379 complete all as specified and directed. Rest all as per drg No FD-379.

TABLE WRITING (FD-275). All dimension, shape and size shall be followed as per drg. (a) All wood work shall be of 1st class hard word (Teak). (b) Irrespective of what is shown in the drawinig top of table shall be 18/19mm thick prelaminated. particle board exterior grade as specified here-in-before 4mm thick teak wood edging shall be provided allround. (c) Front of drawer and shutter of cabinet (below-drawer) shall be of 18/19mm thick prelaminated particles board (prelaminated particale board exterior grade as specified here-in-before sides, bottom and shelf of cabinet shall be 18/19mm prelaninated particale board as per drgs. (d) Botton of drawer and back cabinet shall be 6mm thick commenrical plywood as per IS-303. Rest all as per drgs No FD-275.

Hat Stand with Mirror Large (FD-362) DIMENSION:Overall size shall be 1330 mm long, 710mm high. DESCRIPTION:The inner frame shall be of 50mmx20mm teak wood battens six in nos .The back and front of frame shall be covered with 6mm thick commercial ply.The edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive.Six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg.5mm thick looking mirror of (saint gobian,Modiguard/Atul) shall be provided as shown on drg with beading alround . Mild steel key plate shall be provided at both top corners of the hat stand. Rest all as per drg. FINISH: All teak wood surfaces shall be given high gloss French polish with lacquer finish. All steel surfaces shall be painted with two coats of enamel paint over a coat of primer. Rest all as per drgs.

TP (PART-III)

Board Notice Size 1200mm x 900mm All as per approved by GE. Make Alkosign or equivelant as approved by GE.

Carpet of Size 3 mtr x 2 mtr x 12 mm thick All as per TP and approved by GE. Make Unitex or equivelant as apporved by GE.

Display Board of size 1200mm x 900mm All as per TP and approved by GE/Engineer-in-Charge. Make Alkosign or equivelant as approved by GE.

Almirah Steel. Supplying and Placing an Almirah Knock Down structure with four shelves. size 900mm(W)x450mm(D)x1167.5mm(H) . The construction shall be rigid knock down construction and Material used shall be prime quality CRCA steel - panels from 0.6 mm thick & front frame . Shelf shall be 0.8 mm thick .Configuration (Door) shall be full height steel hinged door . Locking shall be Plastic Recessed Handle cum Cam lock with 3 way locking mechanism with shooting bolt arrangement . Height wise adjustable shelf mounting , Uniformly distributed load capacity per each full shelf shall be 80 Kg maximum . For minor 2 Nos. of adjustable full shelves . The top shall be metal plus leveler shall be screw type with hex plastic base and Epoxy Powder coated finish to the thickness of 50 microns. Make. Godrej; Model: KD Storwel Minor Plain or equivalent in Zauri/ Durain as approved by GE.

Bar Stool. The seat shall be made up of 1.2±0.1cm thick flat plywood with moulded Polyurethane foam and are upholstered with replaceable synthetic leather covers. The dimensions of Seat shall be Diameter 40 cm and Adjustments are 360° Revolving type. The back foam shall be designed with contoured Lumbar support for extra comfort. The upholstery shall be available in synthetic leather. The dimensions of Back shall be 45.0 cm (W) covered with polyurethane foam. The HR polyurethane Foam shall be moulded with density = 45 +/-2 kg/m3 and Hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The manual height adjustment shall be very easy to operate with a help of a knob and easily locked at the most comfortable position. The five-prong pedestal shall be fabricated from 0.2 ± 0.02 cm thick HR sheet ( IS : DD 1079/HR ), powder coated ( DFT 40-60 microns ) and shall be fitted with an injection moulded black Polypropylene Hub Cap and 5 nos. twin wheel castors. The Pedestal shall be 55.0±0.5cm pitch-circle-diameter(65.0±-1.0cm with castors), Circular-foot-ring of dia 52.0±0.2cm shall be made up of dia 1.9±0.2 x 0.12±0.0096cm thk MS ERW Tube for foot support in High-base stool.The twin wheel castors shall be injection moulded in Black Nylon. Overall dimensions shall be Width- 65.0cm, Depth- 65.0 cm, Height- 88.0 to 99.5 cm, Seat Height- 67.0 to 78.5 cm. Make: Godrej; Model: Revolving Stool High Back or equivalent in Zauri/ Durain as approved by GE.

Hospital Bed. Overall dimension. (L) 2198mm x (W) 922mm x (H) 610mm, Details:- (i) Single function bed with adjustable backrest 70deg ,Head board & foot board Head board and foot board having curved profile at the top made of MS ERW round tubes of thickness 1.2 mm & dia 31.75 mm. (ii) Head board and leg board is further strengthned by 3 vertical pipes each of thickness 1.2 mm and dia of 19mm & 1 each Horizontal pipe of thickness 1.2mm and dia of 25.4mm. (iii) The head and leg board should have 4 nos mosquito pole holder. (iv) Bed frame should be made of MS ERW rectangular section tube of size 30mmx60mm of 1.6mm thick. . it should have provision 4 pole holders. It is strengthned by MS ERW Tube of 25.4 mm sq with 1.2 mm thickness. (v) Lying surface should be made of CRCA sheet of thickness of 1mm thick . This lying surface should have 4 sections for bed profiling i.e. back adjustment, fixed pelvic section, upper and lower leg adjustment. (vi) Lower leg rest section is provided with Ratchet for leg rest adjustment. (vii) Mattress platform is strengthned by tubular frame of size 25.4mm sq x 1.2mm thickness. It should be strengthned by trapizodal contour ( rounded corner) 14 nos, embossed cut out. (viii) All metal complaints should be pre treated with zinc phosphating and then powder coated with anti microbial epoxy polyster powder coating.

(ix) Mechanism. The backrest and leg rest should be operated with the help of lead screws and crank mechanism. Lead screws should be made from EN8 and ACME threads with roll formed. (x) Handles:All the functions should operated with the help of 2 ergonomically dedicated handles, which are made of metal inserted PP co polymer, lever should be snap locked when not in use. (xi) All the handles should be provided operating guidence stickers Castors There should be High endurance, metal castors of 125mm wheel dia having provision for diagonal locking system. (xii) Urine bag holder. The bed should have urine bag holder on both side of the bed. (xiii) Welding. To ensure qood quality welding " Co2 Argon" process should be adhered to. (xiv) Powder Coating. All metal components should be pre treated with zinc phosphating in 9 tank porcess and then powder coated with epoxy polyster powder coatng. (xv) Packing goods should be supplied in knocked down construction to reduce carbon emission. (xvi) In house test treport proof loading test, cycle tests , impact test, horizontal & vertical load tests for side rails, salt spray test, castor break test, pull test for head and foot board. Certificate. The manufacture should complaint with ISO 9001, 14001, OHSAS 1800, ISO 13485 : 2016, USFDA and CE certification Make : Godrej, Model Ayush Semi Fowler Bed or equivalent in Zauri/ Durain as approved by GE.

Mattress. The dimention (L)1965 mm x (W)830mm x (H)100 mm. The bed should be provided with 40 density 100 mm thick PU foam mattress which should be covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stiches for the mattress cover should be concealed. Make Godrej or equivalent in Zauri/ Durain as approved by GE.

Computer Chair. The seat and back shall be made from 1.2 ±0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of seat shall be 45.0cm(W) x 42.0cm.(D) and of back shall be 40.0cm(W) x 47.0cm.(H). The seat and back covers shall be injection moulded in black Co-polymer Polypropylene. The HR polyurethane foam shall be moulded with density.=45±2.kg/m3 and hardness load 16±2 kgf as per IS:7888.for 25% compression. The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 em. thk. HR steel. The permanent contact mechanism shall be designed with 360° revolving type, 14±2°maximum back tilt only, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal shall be 62.0 ±0.5cm. pitch-centre dia. (72.0 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.0 to max 54.0cm, Height - min87.5 to max 98.5cm, Width & Depth of Chair as measured from pedestal - Width-71.0 cm and Depth-71.0 cm. Make : Godrej; Model: Diva Mid Back with Arm or equivalent in Zauri/ Durain as approved by GE.

Easy Steel Chair. The seat shall be made up of 1.2+/-0.1cm thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded polyurethane foam. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 51.0cm(W) x 48.0cm(D) and of back shall be 48.0cm(W) x 64.5Cm(H). The armrest top shall be made of moulded polyurethane and mounted on to a fixed type M.S tubular armrest support chrome plated. The Arm support has static vertical adjustment of +/-1.5+/-0.05cm. The mechanism of the chair shall have following features : 360⁰ revolving type, Front pivot synchro mechanism, Tilt tension adjustment, Single point control, 4 position locking with anti shock feature, Seat/Back tilting ratio of 1:2. The backrest shall consist of a fixed type mechanism i.e no back up/down adjustment. The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The pedestial shall be fabricated from 0.2+/-0.02cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap. The size of the pedestal shall be 66.0+/- 0.5 cm pitch-centre-dia (76.0 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 76.0cm, Depth of Chair - 76.0cm as measured from pedestal below. Height from ground - min 91.0 to max 100.0cm. Seat height - min 46.0 to max 55.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Make: Godrej; Model: Kareena Midback or equivalent in Zauri/ Durain as approved by GE.equivalent as approved by GE.

Visitor Chair Cushioned. The seat shall be made up of 1.2+/-0.1cm thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded polyurethane foam. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and hardness load 16+/- 2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 51.0cm(W) x 48.0cm(D) and of back shall be 48.0cm(W) x 64.5Cm(H). The armrest top shall be made of moulded polyurethane and mounted on to a fixed type M.S tubular armrest support chrome plated. The Arm support has static vertical adjustment of +/-1.5+/-0.05cm. The backrest shall consist of a fixed type mechanism i.e no back up/down adjustment. The leg frame welded assembly shall be chrome plated, made from 3.5+/-0.03cm x 1.5+/-0.02cm x 0.16+/-0.0128cm thick round MSERW tube and provided with a base plate for seat fixing. Overall dimensions of Chair shall be, Width of Chair - 66.5cm, Depth of Chair - 58.0cm as measured from pedestal below. Height from ground - 88.5cm. Seat height - 45.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Make: Godrej, Model: Kareena Visitor or equivalent in Zauri/ Durain as approved by GE.

Officer Chair. The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and upholstered with fabric and moulded polyurethane foam with PVC lipping all around. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 49.0cm(W) x 71.0cm(H).The one-Piece armrests should made of black integral skin polyurethane with 50-70 shore 'A' Hardness and reinforced with M.S insert. The armrests shall bescratch and weather resistant. The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 0.5+/-0.05cm thick HR steel. The mechanism of the chair shall have following features : 360⁰ revolving type, Center tilt synchro mechanism, Tilt tension adjustment, Upright position locking, 17 degree+/-2 maximum tilt on pivot at center. The chair shall be provided with pneumatic height adjustment which shall have stroke of 12.0 +/- 0.3 cm. The bellow should be 3 piece telescopic type and injection moulded in black polypropylene. The pedestial shall be injection moulded in black 33% glass-filled Nylon-66. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 66.3+/- 0.5 cm pitch-centre-dia (76.3 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 76.3cm, Depth of Chair - 76.3 cm as measured from pedestal below. Height from ground - min 100.0 to max 112.0cm. Seat height - min 41.0 to max 53.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Make: Godrej; Model: Premium High Back Chair or equivalent in Zauri/ Durain as approved by GE.

Executive chair. The overall dimensions of the chair shall be 76.1cm x 76.1cm x (113.6-131.1cm). The seat height shall be 44.5cm54.5cm. The cushioned seat and back is made of injection moulded Plastic outer and Inner. Plaster inner is upholstered with stitched cover and moulded high Resilience Polyurethane foam of density 45kg per meter cube. The stitched cover is made from spacer fabric and leatherette. Seat size shall be 47cm x 48cm. The Back size shall be 45cm x 75.5cm. The armrests top is moulded from PU and mounted on to a drop lift adjustment type tubular armrest support made of 3.8cm diameter x 0.2cm thick MS ERW tube. The armrest height is adjustable upto 6.5cm in 5 steps. The armrest structure is powder coated upto 40-60 microns. It shall have active bio synchro mechanism with features like 360 degree revolving, front pivot tilt mechanism, tilt tension adjustment, 5-position tilt limiter, etc.. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is 6cm. It shall also have adjustable back support. Back frame is connected to Up/Down mechanism housed in plastic T spine. It can be adjusted from 7.2cm for comfortable back support to suit individual need. The pneumatic height adjustment has an stroke of 10cm. The pedestal is injection moulded in black 33 % glass filled Nylon 66 and fitted with 5 nos. of twin wheel castors. The pedestal is 66cm pitch center dia.Make: Godrej; Model: Versa Neo High Back Chair or equivalent in Zauri/ Durain as approved by GE.

Dining Chair long back. Overall Size Width : 45cm Depth : 52cm Height : 99cm BACK LEG MATERIALS & SIZE:Steel,coating:chrome.SEAT MATERIALS & SIZE:Upholstery:PVC Upholstery Color :TEXTURE BLACK Make: Godrej; Model: Tia or equivalent in Zauri/ Durain as approved by GE.

Conference Chair Cushioned. The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood and shall be upholstered with fabric upholstery covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0 cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame of dia 2.54 ±0.03cm x 0.2±0.016cm thick. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. The dimensions of back shall be 46.5 cm (W) x 60.5 cm (H). The HR polyurethane foam shall be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to max 54.3cm, Height - min93.5 to max 104.5cm, Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. Make: Godrej; Model: Oxbo Mid Back or equivalent in Zauri/ Durain as approved by GE.

Peg Table. Overall Size : Width : 60cm Depth : 60cm Height : 49.8cm Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness.Drawer bottom is made of 9 mm thick prelaminated particle board .Drawer front is made of 18 mm thick PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction : Knock down .Finish : All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets : 1 nos . Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Hardware : Hettich . Construction : Knock down .Finish : • All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band . PU lamination is high gloss in Ecru shade Packets : 1 No. Make: Godrej; Model: Meraki or equivalent in Zauri/ Durain as approved by GE.

3 Seater Sofa Set with Cushion. Overall Size :Width : 171cm Depth : 86cm Height : 77cm Seating Height : 39 cmFrame material : tropical solid wood , Seat foam : polyurethane foam with recron layer. Foam density : 18 kg/ cubic cm. Back foam : polyurethane foam with silicon fill At arms. Foam density : 22 kg/cubic cm Make: Godrej; Model: Rio 3 Seater or equivalent in Zauri/ Durain as approved by GE.

3 Seater Sofa Set with Cushion. Overall Size :Width : 189cm Depth : 82 cm Height : 90cm Seating Height : 44 cm. Frame material :plywood, pine wood and MDF. Seat foam : polyurethane foam density : 28 kg/ cubic cm with super soft topper foam of 25mm. Back foam : polyurethane foam with silicon fill At arms. Foam density : 32 kg/cubic cm with super soft topper foam of 25mm. S-Spring suspension system built in the base frame for a bouncy feel.Polyester woven fabric and Rubberwood legs. Make: Godrej; Model: Bobbin 3 Seater or equivalent in Zauri/ Durain as approved by GE.

2 Seater Sofa Set with Cushion. Overall Size :Width : 150cm Depth : 82 cm Height : 90cm Seating Height : 44 cm. Frame material :plywood, pine wood and MDF. Seat foam : polyurethane foam density : 28 kg/ cubic cm with super soft topper foam of 25 mm. Back foam : polyurethane foam with silicon fill At arms. Foam density : 32 kg/cubic cm with super soft topper foam of 25 mm. S-Spring suspension system built in the base frame for a bouncy feel.Polyester woven fabric and Rubberwood legs. Make: Godrej; Model: Bobbin 2 Seater or equivalent in Zauri/ Durain as approved by GE.

Computer table:- Overall Size (Width X Depth X Height): (+/-5) mm,Length: 1200 mm Width: 600 mm Height: 750 mm,Keyboard Tray Size: 620 mm x 300 mm x 18 mm, Raw Material : Pre-laminated particle board 18 mm as per IS- 12823-1990; Metal Parts: SLIDE MOUNTING DRAWER SLIDE POWDER COATING,Hardware: (Details) MINIFIX SET,DOWELL,UNIVERSAL LOCK,C-HANDLE,6 # CASTOR U-TYPE,FASTNERS,Construction: Knock down fitting. Make: Godrej; Model: COMPANION C-3 or equivalent in Zauri/ Durain as approved by GE.

Dining table 06 Person. Length : 150cm Width : 90cm Height :75.7cm, TABLE METERIALS & SIZE :TOP: 19mm MDF board with okume veneer,Colour : Brown Black,LEGS: 720 x 103 x 20 solid wood , Colour : Brown Black. Make: Godrej; Model: Jack or equivalent in Zauri/ Durain as approved by GE.

Center Table Overall Size : Width : 100cm Depth : 65cm Height : 45cm. TABLE LEGS METERIALS:Wood.Color :cherry, TABLE TOP MATERIALS & SIZE : (tempered Glass/ 10mm),L X W X T : 1000x650x10mm Color : clear Make: Godrej; Model: Alice or equivalent in Zauri/ Durain as approved by GE.

Position Table The size shall be 1200mm Width x 600mm Depth x 750 mm Height. The table top shall be made of pre- laminated particle board with 18 mm thick and 15 mm thick understructure covered with PVC lipping .There shall be locking provided for top drawers only , attractive black colour handles for all drawers plus only one colour is available beech. It shall have only 1 drawer attachment. Make: Godrej; Model: Enzo or equivalent in Zauri/ Durain as approved by GE.

Table Desk with ERU The size shall be 2100mm Width x 1600 mm Depth x 765 mm Height.The main top shall be of Particle board (Melamine Finish) 1800 x 795 mm.The top shall be 25 mm thick plus 15 mm frame and 2 mm PVC lipping on top .Also there shall be 0.35 mm PVC lipping on frame.The Modesty panel shall be 1100 x 405 x 16 mm thick particle board (Melamine Finish) with 0.35 mm thick PVC lipping.The Drawer Front shall be of size 500 x 170 x 16 mm thick Particle board (Melamine Finish) with 0.35 mm thick PVC lipping.The KBPT shall be 578 W x 284 D x 16 mm with 0.35 mm Thick PVC lipping.The ERU shall have all panels of 16 mm thick Particle board (Melamine Finish). Make: Godrej; Model: Ascent or equivalent in Zauri/ Durain as approved by GE.

15 Seater Modular Conference Table. Size: 1350mm x 600mm (6 Nos) and 1800 mm x 850 mm (1 No) Worksurface should be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Plastic ABS access flap is provided for easy access to wires and cables.Understructure & Modesty should consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Aluminium alloy 63400 - WP profile is used for connecting panels together. The product should have a knock-down construction. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns) Wire Management. An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated(DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop. Make: Godrej Model: Mingle or equivalent in Zauri/ Durain as approved by GE.

Dining Table 08 Persons. Size :Length : 178cm Width : 90cm Height : 76cm, TABLE METERIALS & SIZE : TOP: solid sheesham wood, LEGS: solid sheesham wood, Colour : Brown Oak with 30% gloss, Make: Godrej, Model: Legacy or equivalent in Zauri/ Durain as approved by GE.

Three Seater Waiting Chair :- with Cross beam made up of Black powder coated rectangular M.S.ERW tube having 8 ± 0.03 cm x 4 ± 0.03 cm x 0.2 ± 0.014 cm size. Leg and armrest shall be chrome plated made of cold rolled steelwith 0.12 ± 0.013 cm thinkness. Seat back shell shall be 1.6 mm thick powder-coated perforated shell made from cold rolled M.S. sheet 0.14 ± 0.013 em thickness. The Side Bar shall be made of Chrome plated solid steel 3 ± 0.03 cm x 1.2 ± 0.3 cm (DIN174)with fluting and plastic inserts.The Shell shall be assembled on the Cross Beam with help of M8 Bolts (Per Seat- 8 nos. Seat to Bracket and 4nos. Bracket to Cross Beam). The seat & back cushion shall be made up of PU foam upholstered with leather cloth or fabric with plywood. Overall Dimensions shall be Seat Height - 40 cm, Height - 67.5cm, Width & Depth of Chair as measured from pedestal - Width163.0cm and Depth-57.0 cm. Make: Godrej, Model: Nano Perch or equivalent in Zauri/ Durain as approved by GE.

Note. The above drawings as mentioned in here-in-before for item No 1 to 25 are standard drawings and not being enclosed with the tender documents. If required theses can seen in any MES Office on any working day with prior approval.

M/s Rajesh Kumar Jain

Daya Nand Jindal