Repair/Maintenance and Replacement of street light/ security light at AF Stn Deolali

Amount

Disconnecting/ Isolating electric supply from the source at electric pole / on walls/ tower/ gates (height shall not less than 5.0 M from ground level) and taking down carefully for repairs the existing unserviceable street/ security light/ gate/ light/ flood light fittings such as LED/ FTL/ CFL / HPSV/ MH of any make/ type/ wattage at and repairs at shop by checking and making the fittings serviceable at any time round the clock by replacing the damaged/ unserveciable parts with new parts as required and supplied, under relevant items at the supply only rates subsequently followed as mentioned here in under, by the contractor for replacement to suit the existing parts and fittings ( fixing charges for replacement shall be deemed included in the quoted rates against serial item No. 1) complete refixing at existing locations or as directed by Engr-in-charge, connecting with source and testing for proper functioning of the fittings complete as directed.

Supply only Bipin holder for 40 watt fluorescent tube rod

Supply only starter 230V 40W FTL fitting.

Supply only Choke copper wounded suitable for fluoroscent tube light fittings of 40 W/30W 50Hz AC.

Supply only flouroscent tube rod 36/40 watt

Supply only starter holder for FTL/ S/L fittings.

Supply only Bipin holder base for FTL/S/L fitting

Supply only ignitor for HPSV lamps 70/150 watts

Ditto all as per serial item No 8 above but for 250 watts

Ditto all as per serial item No 8 above but for 400 watts

Supply only LED outdoor drivers up to 48W of suitable for LED fittngs

Supply only holder (porcelain threaded holder)suitable for 70,150,250,400 watt HPSV lamp

Supply only HPSV lamps 70 watts

Supply only HPSV lamps 150 watts

Supply only HPSV lamps 250 watts

Supply only HPSV lamps 400 watts

Supply only choke suitable for HPSV/MH lamps 70 watts

Supply only choke suitable for HPSV/MH lamps 150 watts

Supply only choke suitable for HPSV/MH lamps 250 watts

Supply only choke suitable for HPSV/MH lamps 400 watts

Supply only electronic Ballast 2x24 W suitable for 4 x 24 watt FTL street light fittings

Supply only Fluroscent Tubular lamp 1x24 watt suitable for 4x24 watt T5(HO) luminaire of Crompton Greaves Make or equivalent model of Philips/Bajaj/Wipro as approved by GE complete all as directed by Engg. in charge.

S&F PVC insulated and weather proof three core copper multi stranded conductor cable 2.5 Sqmm size as required length for replacing unserviceable cable for street light where ever found unserviceable and required from over head conductor or junction box to street light connector of Street Light fittings all as specified & as directed by Engr-in-Charge.

All as per Sl item No 23 here in before but single core of 1.5 sqmm size all as specified & as directed by Engr-in-Charge.

Labour only for repairs to existing unserviceable gatelight fittings, such as post top lanterns integral spherical shaped fittings, diamond shaped mercury fittings etc in position at site by checking and making the fittings serviceabe any time round the clock by replacing the damaged / unserviceable parts with new parts as required and as directed and testing for proper functioning of fittings coplete as directed. Note: The follwing parts as per SI No 24 to 28 where found unserviceable shall be arranged and supplied by the contractor for replacement to suit existing parts and fittings and the contractor shall be paid for the following items supply only rates quoted against SI Item No 26 to 30 and charges for fixing/replacing elements of those items shall be deemed as included in the quoted rates against SI item No 25

Supply only LED lamp 10 watt normal holder type (Regular Retro fit )

Supply only LED lamp 5 watt normal holder type

Supply only LED lamp 7 watt normal holder type

Ditto all as per serial item No 24 above but for 15 watts

Supply only PVC doom suitable for 11 watt post top lantern/ gate or garden light transparent / milky fittings

S&F in repairs street light brackets with 40 mm dia GI tubing light grade, 1.5 metre length, bend to shape required including fixing with suitable MS clamps made out of MS flat 40x3 mm, nuts, blots, washers etc. and fitted on HT/LT poles/walls all as directed.

S&F in repairs street light brackets with 25 mm dia GI tubing light grade, 1.5 metre length, bend to shape required including fixing with suitable MS clamps made out of MS flat 40x3 mm, nuts, blots, washers etc. and fitted on HT/LT poles/walls all as directed.

Supply only lamp for MH light fitting 150 Watt (DE) of any colour

Supply only control gear box complete with accessories, ignitor for 150 watt flood light / MH light fittings

All as per serial item No 34 above but for 250 watts

Cutting of branches of trees having girth exceeding 5 cm but not exceeding 20 cm including disposal of unserviceable material to a distance 100 mtr for removing/ cleaning over head ACSR conductor around 3 mtrs all as directed by the Engineer in charge.

Supply and top up of distilled water to gain required proper specific gravity of electrolyte in lead acid battery installed with solar street light system.

M&L for repairing solar street light including opening of battery chamber, checking and servicing battery connection, top up battery water, checking and repairing of electronic items related to solar light including replacement of driver unit, cleaning of solar panel and testing after completion all as directed by engineer in charge.

S&F in repairs street light fittings 40 watt LED energy saving, environmental friendly long life versatile pressure die cast housing with toughned glass IP 66 protection, impact resistance of IK 07 & 10 KV external SPD roadway luminaire with high power LED with secondary optics and acessories fixed on existing/new GI pipe braket fixed on HT/LT poles and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. make: Crompton cat part No LSTS 40 CDL or equivalent in Philips, Havells, wipro, Bajaj as approved by GE complete all as directed by Engr-in-charge.

S&F in repairs street light fittings 30 watt LED energy saving, environmental friendly long life versatile pressure die cast housing with toughned glass IP 66 protection, impact resistance of IK 07 & 10 KV external SPD roadway luminaire with high power LED with secondary optics and acessories fixed on existing/new GI pipe braket fixed on HT/LT poles and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. make: Crompton cat part No LSTS 30 CDL or equivalent in Philips, Havells, wipro, Bajaj as approved by GE complete all as directed by Engr-in-charge.

S&F in repairs post top lantern decorative HERITAGE LED light fittings 1x20 watt retro LED with opel deffuser including LED 20W including its pedestal duly fixed in the PCC, IP 65 protection fixed on existing/new GI pipe braket and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. make: Crompton cat part No LPTH 20 CDL or equivalent in Philips, Havells, wipro as approved by GE complete all as directed by Engr-in-charge.

S&F in repairs flood light fittings 150 watt LED energy saving, environmental friendly long life versatile die cast aluminium housing with IP 66 protection, 10 KV external SPD with high power LED and acessories fixed on existing/new GI pipe braket fixed on HT/LT poles and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. make: Crompton Cat Part No: LFLN-150-CDL/60 or equivalent in Philips, Havells, wipro, Bajaj as approved by GE complete all as directed by Engr-in-charge.

S& F in repairs18W all in One Solar Street Light IP65 Protection, 18 W (120 lm/watt) 6000k-6500k including inbuilt Solar Panel 35 W (Monocrystalline Silicon Cell), with PIR Sensor, 18*1 LED Panel, CRI > 80% 5000 burning hr LED lamp life, Battery Lithium-Ion (LifePO4) 12.8 V 15 AH, Including necessary fixing bracket, nut, bolt & washer etc. complete. Cat Ref: BAJAJ 112572 BSZSL 18 W LED (UJ) or Equivalent in Tata BP Solar India/ BHEL/Havells Note:- Ther serviceability of solar street light will be maintained for minimum two years under supervision of OEM.

Taking down unserviceable main switch supply install, testing commissioning sheet metal box of size 60x45x20 cm made out of 1.6mm thick CRCA sheet powder coated for fixing street light timer switch, frame pole mounted type with following accessories and connecting cable with proper lugs, glands etc.(a) Digital Timer switch AlphaRex D22, 2 channels Legrand cat No. 412641(b) 25 Amps, 4 pole/230 volt power contactor Cat No 4125 51or equivalent in Secure, Rishabh, L&T as approved by GE) all as specified and directed.

M&L for jointing & testing heat shrinkable cable joint kit , straight through , out door type for 1100 volts LT XLPE/PVC insulated cable of aluminium conductor up to 50sqmm 3-1/2 core cable including necessary jointing work all as specified & directed

M&L for jointing & testing heat shrinkable cable joint kit , end termination , out door type for 1100 volts LT XLPE/PVC insulated cable of aluminium conductor up to 50 sqmm 3-1/2 core cable including necessary jointing work all as specified & directed

Restringing of existing LT overhead line of copper/ACSR conductor after opening of binding wire from insulator and bringing the sag within limit rebinding the same with insulator with 16 SWG aluminium wire/suitable copper wire all including renewal of jumpers by providing heavy duty alkathine pipe of approved quality, reconnecting the service connections after cleaning the carbon and foreign material complete all as directed. (Note : All the tree branches obstructing to the O.H line shall be trimmed up to 3 mtr away from the O.H line. Unit rate quoted shall be deemed to be inclusive of charges for the trimming of trees.)

S& F in repairs pin type porcelain, vitreous, white, brown or green insulator including one mild steel spindle, two galvanised iron washers and one galvanised iron nut 100mm height, 65 mm dia for 1100 volts grade on existing cross arms on LT poles

S&F in repairs shackle type porcelain, vitreous white brown or green, insulator for working pressure 6600 volts of 150 mmx 125mm including galvanised mild steel straps of 38x5 mm size 20mm dia bolts, washers & nuts or 50x6 mm size Flat iron D clamp etc on existing cross arms on LT pole all as specified and directed byEngr-in-charge.

Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out in soft loose soil all as specified and as directed.

Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out in hard dense soil all as specified and as directed.

Returning Filling in including spreading, leveling, watering & well ramming in layers n. exc 25 Cm all as specified and as directed.

Removing excavated/Surplus soil n exc 50 Mtr & depositing where directed at a level n. exc 1.5 Mtr above the starting point all as specified and as directed.

M&L for double wall corrugated (DWC) duct (dure guard) as per IS 14930 part II LT UG cable protection including coupler, elbows, T joiints, Bends etc. and test report Make: Dura line/ Gemini/ Rex of size 38mm inner dia and 50mm outer dia al as per direted by Engr in charge.

Supply and laying in repairs LT XLPE insulated/PVC heavy duty armoured cablle 1100 volts grade UG stranded aluminium conductor electric cable cross sectional area 25 Sqmm 4/3.5 Core including necessary connection with provision of lugs & cable gland fixing arrangements all as specified and directed.

Supply and laying in repairs LT XLPE insulated heavy duty armoured cablle 1100 volts grade, multi-stranded aluminium conductor electric cable, cross sectional area 16 Sqmm 3.5 Core including necessary connection with lugs, cable gland & fixing arrangements all as specified and directed.

Supply and laying in repairs LT XLPE insulated heavy duty armoured cablle 1100 volts grade, multi-stranded aluminium conductor electric cable, cross sectional area 35 Sqmm 3.5 Core including necessary connection with lugs, cable gland & fixing arrangements all as specified and directed.

Supply and laying in repairs LT XLPE insulated heavy duty armoured cablle 1100 volts grade, multi-stranded aluminium conductor electric cable, cross sectional area 10 Sqmm 2.0 Core including necessary connection with lugs, cable gland & fixing arrangements all as specified and directed.

S & F in repairs single piece moulded PVC box of size 230X185X110mm outer dimensions (Sintex or equivalent of National ) consisting of one porcelain kit kat 6 Amps with suitable fuse wire as per current requirement & one 4 way connector including all necessary fixing arrangements to fix to pole i.e. clamps, nuts, bolts & washers of suitable size after dismantling the existing pole coping and replacement of cable lugs and cable gland all as directed.

Supply and laying, fixing, tube galvanised light grade with all fittings laid in tenches/Fixing on wall/pole including fixing arrangements like clamp, nut and bolt etc of following size

(a) 25mm bore.

(b) 15mm bore.

M&L for Cable route indicator fabricated from 40x40x6mm angle iron 450mm long, rivited or welded with 100mm dia CI or MS round disc duly engraved " LT cable" in letters including grouted in ground with PCC 1:4:8 type D-2 compete all as specified and directed by Engr-in-Charge

M & L for cement concrete (1:3:6 ) type C-1 using 20 mm graded stone aggregate, including weathering, slightly rounded Chamfered angles and throating including necessary form work all as directed .

M&L for checking of serviceability of existing street/security/gatelight fittings in whole 25 ED area including submitting serviceability report to office in proper fomat using necessary man power, T&P and transportation facility all as directed by Engr in charge

M&L for locating UG cable fault using cable fault locator taking all necessary precaution as directed by Engr in charge

S&F in repairs rewirable switch fuse unit of capacity 100 Amps TPN in sheet steel enclosure, 415 Volts, 50 Hz, AC including all necessary connections & testing complete

All as per item No. 65 above but 63 Amps capacity

All as per item No. 65 above but 32 Amps capacity

S&F in repairs rewirable switch fuse unit of capacity 32 Amps SPN in sheet steel enclosure, 230 Volts, 50 Hz, AC including all necessary connections & testing complete

All as per item No. 68 above but 20 Amps capacity

All as per item No. 68 above but 16 Amps capacity

M&L for stay assembly for LT pole complete with accessories as shown in electrical plate no 1 including stay rod 200 mm dia, loop type insulator, stay wire, stay clamp, excavation, concrete etc all as specified and directrdd by Engr in charge.

S&F in repairs street light fittings 45 watt LED energy saving, environmental friendly long life versatile pressure die cast housing with toughned glass 10 KV external SPD roadway luminaire with high power LED with secondary optics and acessories fixed on existing/new GI pipe braket fixed on HT/LT poles and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. make: Crompton cat part No LSTS 45 CDL-1 or equivalent in Philips, Havells, wipro, Bajaj as approved by GE complete all as directed by Engr-in-charge.

S&F in repairs street light fittings 60 watt LED energy saving, environmental friendly long life versatile pressure die cast housing with toughned glass 10 KV external SPD roadway luminaire with high power LED with secondary optics and acessories fixed on existing/new GI pipe braket fixed on HT/LT poles and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. make: Crompton cat part No LSTP 60 CDL or equivalent in Philips, Havells, wipro, Bajaj as approved by GE complete all as directed by Engr-in-charge.

S & F in repairs single piece moulded PVC box of size 230X185X110mm outer dimensions (Sintex or equivalent of National ) consisting of one MCB SP 01-06 Amps suitable as per current requirement & one 4 way connector including all necessary fixing arrangements to fix to pole i.e. clamps, nuts, bolts & washers of suitable size after dismantling the existing pole coping and replacement of cable lugs and cable gland all as directed.

Supply only LED outdoor drivers above 48W up to 150W of suitable for LED fittings

Supply and fix in repairs light sensor photo cell unit Model No SA31P2 to control street light, operating voltage 220-240V, frequency 50/60 Hz, rated current 6A all as specified and directed by Engr-in-charge.

S&F in repairs flood light fittings 120 watt LED energy saving, environmental friendly long life versatile die cast aluminium housing with IP 66 protection, 10 KV external SPD with high power LED and acessories fixed on existing/new GI pipe braket fixed on HT/LT poles and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. make: Crompton Cat Part No: LFLN-120-CDL/60 or equivalent in Philips, Havells, wipro, Bajaj as approved by GE complete all as directed by Engr-in-charge.

S&F in repairs flood light fittings 90 watt LED energy saving, environmental friendly long life versatile die cast aluminium housing with IP 66 protection, 10 KV external SPD with high power LED and acessories fixed on existing/new GI pipe braket fixed on HT/LT poles and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. make: Crompton Cat Part No: LFLN-90-CDL/60 or equivalent in Philips, Havells, wipro, Bajaj as approved by GE complete all as directed by Engr-in-charge.

M R ENTERPRISES

KOYNA ENGINEERS PVT LTD

MAHIMA CONSTRUCTION

SHRI SULAI ELECTRICALS

shubham Enterprises

Veer Brothers

LOKMANYA ENTERPRISES

M/s.NIKI ENTERPRISES