GE/PNH-42/2021-22

Amount

B&R PORTION:- Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specified provided for complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D-2 (using 40mm graded aggregate) as in sub base of floor/path/hardstanding complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4, type B-1 (using 20mm graded aggregate) as in floor/path/hardstanding complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-1 (using 20mm graded aggregate) as in sub base of floor/path/hardstanding complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block with grey cement and pigment of any shape, colour and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade and including sand filling min 25mm thick complete all as specified and directed

M&L for chequered colour cement concrete tiles with grey cement and pigment of size 30x30cmx 25mm thick set jointed and pointed in neat cement slurry in floors/steps including screed bed or bedding layer of morter 15mm thick in cm 1:4 complete all as specified and directed

M&L for glazed ceramic coloured tiles of size 450 mm x 350 mm x 7mm/ 350x 250x 7 mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:4 complete all as specified and directed. Note:- Shade/Colour of tile shall be approved by the GE.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/Rectagular) area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm in floor etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including cement screed bed 15 mm thick in cement mortar 1:4 base complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/Rectagular) area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm in floor etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including cement screed bed 15 mm thick in cement mortar 1:4 base complete all as specified and directed.

M&L for coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light shade) including Screed bed or bedding layer of mortar 15 mm thick CM 1:4 for laying floor/wall finishes complete all as specified and directed

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling of size 605 x 605mm complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for 6mm thick Non asbestos fibre cement building fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling with screws complete all as specified and directed.

Taking down cement plaster from brick or stone walls hacking for keys & scrubbing down with water including raking of joints etc as in patches complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar 1:4 on bricks surface, surface finished even & smooth without using extra cement using WPC @ 3% of cement complete all as specified and directed . Note : WPC shall be measured and paid separately

Supply only liquid water proofing compound complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar 1:4 on stone masonry or other than fair faces of brick work, surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick or concrete surfaces including finishing even and smooth with out using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering on ceiling in cement mortar 1:3 on fair faces of brick or concrete surfaces finished surface even and fair complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L for preparation of new wall surfaces and applying two coats of white wash on wall complete all as specified and directed.

M&L for preparation of new plaster surfaces of wall and applying two coats of OBD over a coat of chalk whiting primer complete all as specified and directed.

M&L for complete removal of existing treatment on old wall surface and applying two coats of OBD over a coat of primer and including 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coats of white wash on ceiling complete all as specified and directed.

Taking down chowkhat or frame not exc 1.5 Sqm each with shutters (without taking of shutter from the frames) complete all as specified and directed.

Taking down chowkhat or frame exc 1.5 Sqm but n exc 4 Sqm each with shutters (without taking of shutter from the frames) complete all as specified and directed.

Taking down shutters of any description, exceeding 1.0 Sqm but not exceeding 2 sqm each, from chowkhats, complete all as specified and directed.

M&L for Pressed steel frames for doors for size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed.

M&L for 35mm thick 2nd class hardwood plain, framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered paticle board medium density, wood patilcle board with commercial face veneers complete all as specified and directed.

M&L for 30mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc, (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I, section 8, clause 8.24 (a) complete all as specified and directed.

M&L for preparing of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repairs MS door springs 300 mm long and including roller and roller plate complete all as specified and directed.

S&F Solid pvc door frame of size 50mmx47mm made out of 5mm plain colour pvc sheet reinforced with ms square tube suppling and fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick(Stiles) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded plain coloured PVC,C, channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame with 3 Nos stainless steel hinge 100 mm size, welded/sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement. S&F in the frame as per manufacturer's instructions complete all as specified and directed.

S&F steel windows with frame & side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F sheet glass pane ordinary quality & glazing with oil putty 4mm thick not exceeding 0.50 sqm in each pane complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5mm Sqm each pane complete all as specified and directed.

S&F GI wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture complete with beads etc. for door shutter/window shutter of any size/ type/thickness complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F Butt hinges 100 mm long, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F aluminium anodised,barrel tower bolt if extruded section 150mm long complete fixed with steel screws complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy complete all as specified and directed.

S&F Aluminium, anodised, handles 150 mm of extruded section complete all as specified and directed.

S&F aluminium, anodised, handles 150 mm of extruded section complete all as specified and directed.

S&F in repair Mortice lock 4 lever vertical type 100 mm long complete all as specified and directed.

Taking up or down 20mm bore steel tubing & connection including cleaning for or removal from site 20mm complete all as specified and directed.

Refixing 20mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc complete all as specified and directed.

S&F GI tubing medium grade 20mm dia with all fittings, cutting, threading and fixing to walls,ceiling or in floors complete all as specified and directed.

Taking up or down 15mm bore steel tubing & connection including cleaning for or removal from site 15mm complete all as specified and directed.

Refixing 15mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and directed.

S&F GI tubing medium grade 15mm dia with all fittings, cutting, threading and fixing to walls,ceiling or in floors complete all as specified and directed.

S&F in repair 20mm dia Gun-metal, globe gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 15mm dia Gun-metal, globe gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe complete all as specified and directed.

S&F in repairs 15 mm dia Bib taps, Fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Jaguar Cat No QQT-CHR-7037 or equivalent of Make as specified in PS.

S&F in repair 15 mm dia stainless steel concealed Stop cock, Fancy type, with screwed down, screwed for iron pipe complete all as specified and directed . Make:- Jaguar Cat No FLR-CHR-5083NK or equivalent of Make as specified in PS.

S&F in repair 15 mm dia anglular stop cock, Fancy type, with wall flange, screwed for iron pipe complete all as specified and directed . Make:- Jaguar Cat No FLR-CHR-5053N or equivalent of Make as specified in PS.

S&F in repairs 15 mm dia mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed. Make: Jaguar Cat No ARI-CHR-39051B or equivalent of Make as specified in PS.

S&F in repair round shape single flow overhead shower rose with swivel joint fixing to GI pipe of 15mm dia incuding GI Elbow and nipple complete all as specified and directed. Make:- Jaguar Cat No OHS-CHR-1603 or equivalent of Make as specified in PS.

S&F in repair Health faucet 1.2m tube with hook and including all necessary fitting complete all as specified and directed. Make:- Jaguar Cat No ALD-CHR-573 or equivalent of Make as specified in PS.

S&F in repair fancy type pillar cock of 15mm bore with capstan heads, screwd down high pressure, with or w/out Hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. Make:- Jaguar Cat No FLR-CHR-5011N or equivalent of Make as specified in PS.

S&F in repair tubular towel rack, 600mm long complete all as specified and directed. Make: Jaguar Cat No ACN-CHR-1181N or equivalent of Make as specified in PS.

S&F Brass Contessa Soap Dish fixing with screw in the wall complete all as specified and directed. Make: Hindware Cat No-F880011CP or equivalent of Make as specified in PS.

S&F oval type wash hand basin vitreous china white of size 510 X 430 x 430mm with brackets, including CP pillar tap of 15mm bore complete all as specified and directed. Make: Hindware Cat No 10038 or equivalent of Make as specified in PS.

S&F 15mm bore dia Concealed Stop valve (ISI Marked), brass CP (fancy type long shank) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair High or low level PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed.

S&F flush pipe/waste pipe of polyethylene of low or high density of PVC, 32mm dia complete all as specified and directed.

S&F in repair wash basin, Vitreous China (flat back or angle back type) of size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F in repair for vitreous China bowl urinal (back or cornerwall type) complete including providing & fixing plugs bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with & including 60mm long brass screw, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe and waste pipe, (Ist quality) with flat back of size 465x355x265mm white with grating and unions for discharge pipe complete all as specified and directed.

S&F in repair, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision of lime concrete complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolt, flushing cistern and flushing pipe) complete all as specified and directed.

S&F in repairs PVC (EWC) seat cover white colour with flat bottom including CP hinges complete all as specified and directed.

S&F steel windows with frame & side hung shutters including box type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed.

S&F PVC connection 600mm long 15mm dia complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in floors or fixed to walls complete all as specified and directed.

M&L for 110mm bore PVC (SWR) bends any radius provided with access door complete all as specified and directed.

M&L 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F PVC floor trap with grating including jointing with solvent cement to waste pipe 75 mm dia complete all as specified and directed.

S&F in repair 75mm bore PVC soil waste and vent pipe single socketed in any length with rubber ring joints laid in floor or fixed to wall complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR Pt-I, capacity in 500 Ltrs including dismantling existing water tank and removing to store complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR Pt-I, capacity in 1000 Ltrs including dismantling existing water tank and removing to store complete all as specified and directed.

S&F in repairs 20 mm bore, Ball brass valves, high pressure, with polythene float and fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brick work with old size bricks straight of curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed.

M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 (Except stone), complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones & dressing of face beds and joints, with max.depression on face from straight edge held against the dressed surface n exc.20mm in lime or sand stone, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.

M&L for Rendering 20mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:6) complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall,fixed with self tapping screwed complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall,fixed with self tapping screwed complete all as specified and directed.

S&F mild steel flat iron for wind ties for roof including securing bolts and necessary drilling etc complete all as specified and directed.

Opening of cover (of any description and size) of septic tanks and soakage wells/pits, de-sludging / de-watering of septic tanks and soakage wells/pits of any size and depth by mechanical pumping (truck mounted)/ manually,making it fully functional to the entire satisfaction of Engineer-in-charge and removing sludge out side the periphery of defence land at his own arrangement where sanitary hazards do not take place as per directions/ instructions of civil authority and burried in excavated pits and covering the same including refixing covers after cleaning complete all as specified and directed. NOTE:- Unit rate quoted by tenderer shall include taking out sludge from septic tanks and soakage wells/pits (liquid/semi liquid / solid) , excavation of borrow pits for dumping sludge , removing including loading/ unloading and transportation etc.

Cleaning / clearing & maintenance of sewage lines any bore, manholes including CI stacks gully traps floor traps under ground lines any depth by removing any type of blockage from drain 100/150mm dia by roding from manholes to manholes and flushing after cleaning including manholes sludge/ sludge water to be disposed off outside the periphery of defence land including taking off manhole covers and re-fixing the same after cleaning sewage lines. Sewage lines cleared/cleaned under this item are to be maintained and kept fully functional by removing any type of blockage. The cost of this operation /provision shall be deemed to be included in unit rate quoted by the contractor, the cost of which shall also be deemed to be included in the said item, complete all as specified and as directed.

Cleaning of blocked WC up to first manhole and making the drain pipe of any dia fully functional by flushing with water to entire satisfaction of Engr-in-Charge including disposal of sludge outside the periphery of defence land at his own arrangement where sanitary hazards do not take place as per directions/ instructions of civil authority and burried in excavated pits complete all as specified and directed. Note:- Unit rate quoted by tenderer shall include clearing blockage, taking out sludge(liquid/semi liquid/solid ) , excavation of borrow pits for dumping sludge ,removing including loading/unloading and transportation etc.

Excavation in trenches not exc 1.5 m deep and 1.5 m wide and getting out in hard/ dense soil complete all as specified and directed.

Returing filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated materials to a distance not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Demolition & breaking up drain pipes any dia (salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in bed concrete to drain pipes of 150mm bore including packing under and haunching against the sides of pipes after they are laid and tesed ,complete all as specified and directed

M&L for Salt glazed stone ware drain pipes of 150 mm bore grade A (6 kg/sq cm)laid in trenches and jointed in CM 1:3 complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) in cover slabs (for manholes etc), chullah hoods, chajjas, water troughs, mangers, shelves etc, set in CM I : 6 including formwork complete all as specified and directed.

M&L for Cement Concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape requred, including cranking , bending spirally for columns hooking for columns hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Petty repairs for leaking water in bib tap, pillar tap, stop cock, angle valve of any description any size by changing the washer/jumper etc complete all as specified and directed by Engr-in-Charge.

Removal of air lock/blokage of water in GI tubing 15/20mm bore incl taking down (if reqd), cleaning the pipe or fittings etc and refixing the same in position complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/Rectagular) area of each tile exceeding 0.18 Sqm but not exc 0.38 Sqm in floor etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including cement screed bed 15 mm thick in cement mortar 1:4 base complete all as specified and directed.

Taking down shutters from chowkhats, of any description, exceeding 1.0 Sqm but not exceeding 2 sqm each and refixing in same opening after easing complete all as specified and directed.

E&M PORTION Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L for Point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One light point controlled by one way switch 6 Amp complete all as specified and directed.

One fan/ exhaust fan point controlled by two way switch 6 Amp complete all as specified and directed.

One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.

One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.

All as per srl item No 115 above but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 1.5 Sqmm as in continuous earth wire complete all as specified and directed. Make of wiring wire against item No- 115 to 116: Havells/RR Kabel/Finolex

S&F in repair Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed. Make:-Havells/Anchor/Legrand

S&F in repair Switch piano flush type 16 Amp single pole one way, (ISI marked), complete all as specified and directed. Make:-Havells/Anchor/Legrand

S&F in repair Switch socket multipurpose combination 2 in 1, 3 pin, 5 Amp flush type universal, complete all as specified and directed. Make:-Havells/Anchor/Legrand

S&F in repair Switch socket outlet multipurpose combination 2 in 1, 6 pin, 5 and 15 Amp flush type universal, complete all as specified and directed. Make:-Havells/Anchor/Legrand

S&F in repair Ceiling rose, 3 phase PVC/poly carbonate, insulated body, complete all as specified and directed. Make:-Havells/Anchor/Legrand

S&F in repair Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed. Make:-Havells/Anchor/Legrand

Taking down fan, sealing cable end, dismantling blades and removing fan and blades & depositing to store, complete all as specified.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan after repair if any as obtained / taken out from item No-81 above, complete all as specified and directed.

S&F in repair Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings with & including LED lamp 10 watts (B-22 holder), complete all as specified. Make of LED lamp:- Havells cat part No LHlDERUEML8x010 or equivalent make as specified in PS.

S&F in repair Tube light fitting box type suitable for LED 20W tube rod made out of ultra bright, glass shell, glare free, wide angle, single side connection retofit LED tube with G13 lamp holders complete with hosing with all accessories pre wired and making connection with copper flexible cable of appropriate size from ceiling rose to light fitting including 20LED tube rod 4 feet long with single side connection complete all as specified and directed. Make:-Havells Cat Part No:-LHLDEFXD5L8R020 for LED tube rod & Cat Part No:-LHFXCEP1TNNW020 for batten fittings or Equivalent cat part of make:-Wipro / Crompton / Bajaj Note :- The LED batten and LED tube rod shall be of same make.

S&F in repair LED street light fittings 30W made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 complete with hosing with all accessories pre wired with and including 40mm dia GI pipe bracket of 1.2 mtr made to shape as required fixed on wall or pole with FI clamp of required shap & 40x6mm siize, nut, bolts, washers and making connection with three core copper flexible cable of suitable size to light fitting complete all as specified and directed. Make:-Havells Cat Part No:-ENDURAPEARLSL30WLED757SASYTOPCMP or Equivalent cat part of Make specified in PS

S&F in repair Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 12 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. Make:-Havells cat part No-DHDPSHODPW12 or Equivalent cat part of make as specified in P.S.

S&F in repair MCB SPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed. Make:-Havells cat part No- DHMGCSNF040 - DHMGCSNF063 or Equivalent cat part of make as specified in P.S.

S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed. Make:-Havells cat part No-DHMGCSPF006-032 or Equivalent cat part of make as specified in P.S.

S&F 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia GI suspension wire, one twin core cable flat of circular of size 10 Sqmm including taking down existing old service connection, complete all as specified and directed.

S&F in repair 2x2 LED edge-lit luminaire 36 watts suitable for armstrong/grid ceiling complete for low ceiling applications with driver and making connection with copper flexible cable of suitable size to light fitting complete all as specified and directed. Make:-Havells cat part No-STRATO2X2PLR36WLED857MOD for Module and cat part No-LEDDRIVER36V36WS for Driver or Equivalent cat part of make as specified in Appx 'A' to P.S.

House service bracket (hook type), complete, with 3m long GI pipe 40mm dia medium grade, two Nos 90 degree bend, MS hook and guy or stay including taking down existing old unsv house bracket, complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, complete all as specified and directed.

M&L for carrying out 'B' checks of DG set capacity upto 100/125 KVA including replacement of Engine oil and all types of filters as per manufacturers manual and as directed by Engineer in Charge. NOTES: - (i) Engine oil, oil filter, coolant will be measured and paid separelty under revelant item. (ii) 'B' check shall be carried out by the authorised dealer of kirloskar/ Crompton Greaves and certificate of 'B' check shall be produced by the contractor from authorised dealer of Kirloskar / Crompton Greaves (iii) Testing equipments required for `B' check shall be of contractor's responsibility.

Special engine oil 20 W 40 grade all as recommended by manufacturer for first filling in the new /repaired DG sets complete all as specified and directed. Make : Kirloskar/ Castrol

M&L for Coolant concentrate for filling in radiator of DG set complete all as specified and directed. Make of coolant : Castrol or equivalent approved make as approved by GE.

M&L for Painting of DG set any make/any size including base frame complete, by spray painting with two coats of synthetic enamel paint of first quality paint over a coat of red oxide primer after complete removal of old paint and primer by scratching, rubbing and marking SM No complete all as specified and directed.

M&L for cleaning of radiator assy by means of dismantalling from engine completely, flushing out complete old coolant/water ,cleaning by chemical wash , soldering /brazing complete and reassembling the same to the engine for smooth and efficiant functioning complete all as directed.

Repair and maintenance of unserviceable ceiling fan of 1200mm/1400mm sweep at contractor's work shop, incl dismantling complete the ceiling fan parts, inspecting serviceability of all the parts, refixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, bracket, rubber bush, connecting wire, PVC connector, aluminium clamp for rod, bracket, bush rod, greasing/oiling etc assembling, cleaning and testing of ceiling fan complete all as specified and directed. Note: (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A' as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'. (iii) Cost of minor part i.e. Cotter pin, screws shall be deemed to included in the cost of quoted rate.

S&F in repair bearing good quality for ceiling fan 1200mm/1400mm sweep ISI marked complete all as specified and directed.

S&F in repair Gun metal bush for ceiling fan 1200mm/1400mm sweep complete all as specified and directed.

S&F in repair capacitor 2.5 mfd ISI marked complete all as specified and directed.

S&F in repair 3 core 1.5 sqmm copper conductor complete all as specified and directed.

S&F in repair fan blade for ceiling fan 1200 mm sweep of existing make complete all as specified and directed.

All as per item No. 90 above but for ceiling fan 1400 mm sweep of existing make complete all as specified and directed.

M&L for removing of old burnt winding of any size , type and rewinding of stator winding with superior quality copper wire with insulation complete all as specified and directed.

Repair and maintenance of unserviceable exhaust fan of any cap and sweep by dismantling the exhaust fan parts, inspecting the serviceability of parts, refixing of serviceable parts after cleaning, replacement of unerviceable parts i.e. beaing, bush, capacitor, connecting wires, fan blade, locknut, rubber pad etc, oiling/greasing, cleaning and testing of exhaust fan complete all as specified and directed. Note: (i) Unserviceable parts replaced shall be measured and paid separately under relevant items of Sch 'A' as supply only. (ii) Rewinding of stator winding shall be measured & paid for separately under relevant item of Sch 'A'. (iii) Cost of minor part i.e. screws shall be deemed to included in the cost of quoted rate.

Supply of double ball bearing (ISI marked) for exhaust fan of 200 mm sweep to 450 mm sweep fan complete all as specified and directed.

Supply of Gun metal bush for Exhaust fan of any cap. complete all as specified and directed.

Rewinding of 450mm sweep exhaust fan motor with superior quality copper winding wire with insulation complete all as specified and directed.

Rewinding of 300mm sweep exhaust fan motor with superior quality copper winding wire with insulation complete all as specified and directed.

S&F in repair blade of exhuast fan of 200 mm sweep to 450 mm sweep as per existing make complete all as specified and directed.

M&L for disconnecting elect & water connection to geyser of cap 25/50/35 ltr, taking down, from existing position, dismantling and inspecting all the parts, for its serviceability, cleaning of serviceable parts i.e. Heating elemet, base assy, connecting lead, thermostat, electrical contact, electric wiring, indicators, safety valves etc and refixing, replacement of unserviceable parts, re assembling, remounting, reconnecting with electrical & water connectionn and testing complete all as specified and directed. Notes: (i) The defective parts to be replaced shall be measured and paid separately under relevant item of Sch 'A' as supply only. (ii) Cost of minor items i.e. Screws, nut & bolts etc shall be deemed to be included in the above item.

S&F in repair heating element 2.0 KW, ISI marked with gasket suitable for as existing size, type and make of geyser complete all as specified and directed.

S&F in repair thermostat ISI marked suitable for existing make of the geyser under repair of cap 50/25 /35 Ltrs complete all as specified and directed.

S&F in repair inner tank made out of steel sheet conform to IS suitable for 25 ltrs capacity of geyser of different makes vertical type complete all as specified and directed.

All as per item No 112 above but for Geysers of capacity 35/50 ltrs complete all as specified and directed.

Supply only heating plate geyser assembly apparatus, confirming to ISI with PVC rubber washers suitable for geyser of 25 ltrs capacity

All as per Item No. 159 above but for geyser of capacity 35/50 ltr complete all as specified and directed.

M/S Farooq Ahmed Bhat