PROVISION OF MD ACCN FOR SOs EPs CIVILIANS AND MES PERSONNEL AT RATNAGIRI

Amount

Schedule A Part I to Part XIV

Total amount of Sch 'A' Part-I (Buildings & Structures)

Total amount of Sch 'A' Part-II (SITE CLEARANCE & AREA DEVELOPMENT, EXCAVATION & EARTH WORK )

Total amount of Sch 'A' Part-III ( INTERNAL WATER SUPPLY)

Total amount of Sch 'A' Part-IV (INTERNAL ELECTRIC SUPPLY)

Total amount of Sch 'A' Part-V (ROAD, PATH AND CULVERT, STP ROAD)

Total amount of Sch 'A' Part-VI (SEWAGE DISPOSAL)

Total amount of Sch 'A' Part-VII (AREA DRAINAGE)

Total amount of Sch 'A' Part-VIII (COMPOUND WALL, FENCING & GATE)

Total amount of Sch 'A' part-IX (EXTERNAL WATER SUPPLY)

Total amount of Sch 'A' part-X (EXTERNAL ELECTRIC SUPPLY)

Total amount of Sch 'A' part-XI (LIGHTNING PROTECTION)

Total amount of Sch 'A' part-XII (FIRE FIGHTING)

Total amount of Sch 'A' part-XIII (HOT WATER SUPPLY)

Sch 'A' Part- XIV (MISCELLANEOUS) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

INTERNAL ELECTRIC SUPPLY :- Supply,fixing and testing battern LED luminaire 1x22W LED Integrated sleek extruded polycarbonate LED channel including LED tube 22 W and connecting up with twin core twisted flexible copper conductor from ceiling rose to fitting Make: Havels Mod No.DESTELLO50LP/S 25W LED840SPMMAWH or equivalent model of Philips/Crompto Greaves.

Supply,fixing and testing battern LED luminaire 1x18W LED Integrated sleek extruded polycarbonate LED channel including LED tube and connecting up with twin core twisted flexible copper conductor from ceiling rose to fitting MOD No. SSK-SQ-1801 (6500K) complete all as specified and as directed. Make: BAJAJ Cat-Part No. 50803715BAJ 18W or equivalent model of Havells, Philips or Wipro

Supply and fix Energy saving LED round shaped 1 x 12 w ceiling light designed to provide best lighting in compact and lightweight design. Protection-ip20. operating tem- -20 to 40 degree celcius , CRI more than 80 . Input voltage - ac 90-300v 50 hz complete all as specified and as directed. Make:Cat no- LHFOECF1OZ1W011 or equivalent model of Havells or equivalent model of Philips/Crompto Greaves.

Supply and fix LED 11 W , mirror night compact and & decorative luminaire with anti glare diffuser & decorative end caps complete all as specified and as directed. Make:Cat no- LMR 90 of Lucker or equivalent model of Havells or Philips or bajaj

Supply, Hanging and connecting up energy efficient five star rated ceiling fan of size 1200 mm sweep complete with stepped type electronic regulator and down rod including provision of flexible copper cable 3 core of size 0.5 sqmm from ceiling rose to fan, provision of 3 mm thick circular Bakelite sheet cover including writing MES NO. 2 CM height with synthetic enamel black paint all as specified and as directed. Make: Crompton Cat-Part No. VENTILUS 10" or equivalent model of Usha, Havells or BAJAJ

Supply, Fixing and connecting up exhaust fan 300mm sweep, 900 rpm, heavy duty single phase 240 volts AC 50 Hz and connecting up complete including louvres and including provision of cable 3 core, 0.5 Sqmm multi-stranded copper conductor PVC insulated and PVC sheathed flexible wire from ceiling rose to fan all as specified and as directed. Including writing MES NO. 2 CM height with synthetic enamelled black paint all as specified and as directed. Make: Usha, Havells or BAJAJ

Supply, fixing and connecting up complete MCB DB SPN 4 way, double door, 415 V, AC, 50 Hz with minimum IP-43 protection conforming to IS-13032 & 8623, universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides etc all as specified and as directed. (Make: Legrand CAT: 5076 10 TO 5076-14 or equivalent in ABB/SCHNEIDER/L&T).

Supply, fixing and connecting up complete MCB DB SPN 6 way, double door, 415 V, AC, 50 Hz with minimum IP-43 protection conforming to IS-13032 & 8623, universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides etc all as specified and as directed. (Make:SCHNEIDER ACTI9- A9HSND06 or equivalent in ABB/LEGRAND/L&T).

Supply, fixing and connecting up complete MCB DB VTPN 8 way, double door, 415 V, AC, 50 Hz with minimum IP-43 protection conforming to IS-13032 & 8623, universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides etc all as specified and as directed. (Make: Legrand CAT: 5076 10 TO 5076-14 or equivalent in ABB/SCHNEIDER/L&T).

Supply, fixing and connecting up complete MCB DB SPN 8 way, double door, 415 V, AC, 50 Hz with minimum IP-43 protection conforming to IS-13032 & 8623, universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides etc all as specified and as directed. (Make: Legrand CAT: 5076 10 TO 5076-14 or equivalent in ABB/SCHNEIDER/L&T).

Supply, fixing and connecting up complete MCB DB VTPN 16 way, double door, 415 V, AC, 50 Hz with minimum IP-43 protection conforming to IS-13032 & 8623, universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides etc all as specified and as directed. (Make: Legrand CAT: 5076 10 TO 5076-14 or equivalent in ABB/SCHNEIDER/L&T).

MCB SP 5-32 A , 10 KA BREKING CAPACITY ,240/410 V , 50 HZ AC SUPPLY (Make: Legrand CAT:4085 80 10 TO 4085 98-14 or equivalent in ABB/SCHNEIDER/L&T).

MCB TP 63 A , 10 KA BREKING CAPACITY ,415 V , 50 HZ AC SUPPLY (Make: Legrand CAT:4086 43 TO 4086-61 or equivalent in ABB/SCHNEIDER/L&T).

MCCB, 4P, 16 Amp with Icu = 16 KA at 415 volts with thermal magnetic release conforming to IEC 60947 Part-I/IS-13947- Part-I with breaking capacity Ics = Icu at 415 volts of 16 KA, thermal overload setting 70% to 100%, short circuit setting 5 to 10 times -05 Nos. (As out goings for GF, FF, SF and spare) (Make: Legrand CAT: 4200 10 TO 4200 17 or equivalent in ABB/SCHNEIDER/L&T).

MCCB, 4P, 32 Amp with Icu = 16 KA at 415 volts with thermal magnetic release conforming to IEC 60947 Part-I/IS-13947- Part-I with breaking capacity Ics = Icu at 415 volts of 16 KA, thermal overload setting 70% to 100%, short circuit setting 5 to 10 times -05 Nos. (As out goings for GF, FF, SF and spare) (Make: Legrand CAT: 4200 10 TO 4200 17 or equivalent in ABB/SCHNEIDER/L&T).

Supply & fix AC Three phase static energy meter of accuracy class 1.0 ,3 X 240 V ,50 Hz with Backlit LCD display of rating 10 - 40 A (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box. Make L&T Model EM301B or equivalent in HPL/Havells

Supply & fix AC single phase static energy meter of accuracy class 1.0, 240 V 50 Hz with Backlit LCD display of rating 10 - 40 A (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box. Make L&T Model EM101 equivalent in HPL/Havells

S & F modular type 1 module RJ 11 telephone socket with shutter complete all as specified and directed. Make: Legrand Arteor Cart-Part No. 5734 26 or equivalent model of Precision or other make approved by GE

S & F modular type 1 module TV socket complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 25 or equivalent model of Precision or other make approved by GE

RCCB 300 mA , 5-40A ,4 pole 415 v ,a-s (Make: Legrand CAT: 4118 92 or equivalent in ABB/SCHNEIDER/L&T).

RCCB 300 mA , 63A ,4 pole 415 v ,a-s (Make: Legrand CAT: 4118 93 or equivalent in ABB/SCHNEIDER/L&T).

Supply and install RSJ 116x100, 11 m long complete with Base plate,bolts,nuts and screw all as specified. (Note:- Excavation, earth work, PCC etc shall be measured and paid seperately)

S & F SMC box size 200 X 140 X 95 mm internal size with hinged door (L) with 1 No PVC connector 4 way 16 amps & 1 No MCB SP 6 Amps including fitting brackets etc.

Supply and fix LED street light 36 W having minimum luminaries flux 3600 lm complete including fixing bracket made of GI tubing med grade suitable dia,1.5 Mtr long complete with flat iron,nut,bolts and washer etc complete all as specified.

Supply,Install,test & commissioning HT 11 KV metering cubical (CT/PTunit) indoor type with HT bushing & LT side terminals (orboth side bushing) all as per specification of Maharastra state electric board (MSEB) including testing by MSEB or authorised agency of MSEB complete all as specified .

Supply,Install,test and commissioning of Trivector meter three phase four wire TVM 110 Volt , 1 A/5A ,class 0.5 with box complete all as specified.

Supply and instalation & testing of maintenance free chemical earthing of Dual pipe technology of 3 mtr long with outer pipe diameter of 88 mm & inner pipe diameter 48 mm ,the pipes are properly galvanized for 80-120 micron and wall thickness of inner pipe 3mm and 2 mm of outer pipe .There should be terminal for connection of 75X6 mm with two holes of 14 mm diameter dully fitted with the highly conductive material with sealing at both ends with lead terminals of 75X6 mm at top.Alongwith 2 bags of 25 Kgs each of earth Enhancing Compound. The earth enhancing compound should be tested referring to protocol IS 1350 &IEC62321/111/54/CDV.Thev PH value of compoundshould be between 7 to 8.The content of mercury(Hg) & Hexacromium should be below detection level.The electrode should be tested for salt spray test as per BIS 117-09 for corrosion for minimum 500 Hrs.The ELECTRODE shall be dully tested & certified by CPRI (Central power Reserch Insititute),Govt of India for a minimum short circuit current of 42 K Arms for 1 second with initial pick of 88.2 KA including neccessary earth work, refilling etc complete.

DG SET Supplying, installing, testing and commissioning factory assembled silent Diesel Engine driven generators set, fully wired alternator AC to give an out put of 62.5 KVA continuously rating at a PF of 0.8 logging, 415 volts, AC 3 Phase 4 wire 50 H2 +/- 01% supply , 1500 RPM directly coupled with diesel engine water cooled mounted on common base frame complete with floor mounting free tank (service tank) of adequate capacity with free line and accessories PCC foundation work as per manufacturies instuctions, vibration damper pads. Control Panel and other accessories etc and comprising of following:- (P) Battery 1x12 Volt pre-changed PP batteries with lead. "(Q) Fuel tank Minimum 8 hours fuel load diesel storage capacity fuel tank with mounting brackets, factory made of 14 SW | G thick MS sheet with level indicator (A) Diesel Engine:- Water cooled turbo charge with after cooler to deliver suitable BHP at 1500 RPM confirming to BS 5514 and conforming to IS 10000 an overload capacity of 10% for one hour in any 12 continious hours operation with the following accessories:- Make:- Kirloskar Model No HA694TCI G1 or equivalent of Greaves Ltd/Cummins India Ltd) (a) Flywheel with stater ring. (b) Lub oil cooler. (c) Air cleaner. (d) Exhaust silencer. (e) Fuel filter (pre and micro) and fuel liftpump. (f) Lub oil filter. (g) Automatic blower belt tensioning unit. (h) Fuel pump with Mechanical Governor. (j) Flywheel with starter ring. (k) Battery charging alternator

(l) 12 Volt electric stater motor. (m) Exhaust piping made out of STIC C class, MS pipe inclusive of all accssories and hardware, necessary support scaffolding as per manufacture's recommendations to sustain back pressure with rain cap. (n) First fill of oil, coolent and diesel during commissioning and 12 hours testing. (o) Inter connecting copper cabling of adequate capacity between batteries control. Electronic Instrunment panel complete with all accessories as per manufrastructure's specificants displays the following: (i) On/Off/Start key. (ii) Battery charging voltmeter. (iii) Electronic hour meter. (iv) Indication and monitoring of oil pressure & safety trip in case of law oil pressure. (v) Indication and monitoring of collant Temperature & safety tripin care of high coolant Temp. (vi) In built Engine shutdown system in case of over speed. (vii) Indication & monitoring of fuel level and alarm system (p) Battery. 1x12 Volts pre-charged PP batteries with lead. (q) Fuel Tank. Minimum 8 hours fuel load diesel storage capacity fuel tanks with mounting brackets, factory made of 14 SWG thick MS sheet with level indicator fuel Inlet, fuel outlet, airvent drain plug, in let arangment for diesel filling from exterior of canopy (without opening its Pavel) etc complete all as specified.

Alternator. Alternator of suitable rated at 0.8 PF,415 V,3 Phase,4 wire,50 cycle/sec.,1500 RPM, self excited and self regulated regulation + 01% of rated voltage, From no load to full load, insulator class-H & IP-23. The alternator conforwk to BS-2613/IS 4722 Make- Kirloskar. Green Canopy: - Construction of Acoustic Enclosure for said DG Set of cap 62.5 KVA shall be powder coated and fabricated out of 1.5mm thick MS sheet. The silent canopy shall be of nut bolt type construction. Canopy Panel and door shall have inside lining of Fire Retardent foam as acoustic material to reduce noise level to 75db measured at 1.0 meter distance for available frequency as per guidelines of Centre Pollution Control Board. Civil Work. AMF Panel and All civil work related to foundation, installation including Base frame will as per manufrastructure design and be included in rate of item.

Supply and fix aviation obstruction LED type of Bajaj cat No 110731 BGAV 302 LED, 240 V, with timer switch of indioasian Cat No SUL 180a and one No 10 A, MCB, SPN 230 V fixed in a hensel enclousre.

Supply, Install, test and commissioning step down distribution transformer , out door type, copper wound of capacity 315 KVA, HT 11 KV 3 Phase, LT 433 Volts, 50 Hz, 3 phase 4 wire, vector group DYN 11, cooling ONAN with tapping on HT side to varying secondary voltage with in limit as per IS with off load tap changing facility of +7.5% in steps of 2.5% with bushings on HT side and cable entry box for LT side all as per IS : 1180 (Part -I) of 2014 and IS 2026,CBIP standard complete having latest tchhnology with standard fitting including PCC platform of suitable size all as specified and directed.

Supply and install steel tubular pole swaged type 410 SP-55 (11 mtr long) complete with CI base plate, finial taper plug, bolts, nuts and screws complete all as specified. (Note:- Excavation, earth work, PCC etc shall be measured and paid seperately)

Supply & Install Steel tubular swaged poles 410 SP -31(9.0 Mtr long) complete with CI base plate finial tapper plug, bolts, nuts and screw with arrangement of GI pipe dully fitted at a bend of 120 degree complete all as specified.(Note- excavation,earth work,PCC work shall be measured and paid separately)

M&L for RCC Septic tanks with upward filter designed to carry sewage and sullage water, excavation in any type of soil/rock, PCC 1:4:8 below fdn, RCC M-30 design mix in walls, base slab, baffle walls and roof slab incl beams etc with vent shaft, manhole opening with cover connection etc complete with effective depth of 1.5m and overall depth of 3 meter for 150 Users (64x5=320 Restricted to 150 Users)

M&L for Earthing complete with GI plate electrode of size 60 Cm X 60 Cm X 6 mm thick, burried directly in ground vertically ,erath pit not less than 2.25 mtr.deep below normal ground level with the top edge of the earth plate at a depth not less 1.5 mtr below normal ground level connected to GI stip earth lead of size 32 x6 mm by means of bolts, nuts,washers made of galvanised iron and connected to main control board /switch gear/pannel boards all as specified and shown in Electrical plate of MES Schedule (SSR) part-1 including necessery excavation and earth work in any type of soil,charcoal dust,salt and PCC 1:2:4 type B1 in chamber RCC 1:2:4 type, B1 cover slab with 6 mm dia mild steel bars at 100 mm center to center both ways and with 6mm dia MS hook compleate and testing resistence all as specified and as directed.

Design, Supply, Install, Testing and commissioning passenger lift suitable to carry 8 Passnager (544 Kg) at a speed 1.5 mtr per second, lift with single speed motor 415 volts, 3 Phase, AC 50 H2 supply conforming to IS-14665 suitable to serve G + 8 upper floor with AC variable voltage and variable frequency drive (vvv f drive) complete with all standard accessories simplex automatic and manual dual controlled operation with/withoutattendant, centre openign doors with door drive (Electric motor dirven mechanism) sliding stainless steel doors, automatic resure drive (ARD) system. 3D infrared sensor in full height of door and built in announcing system without hand set (05 Nos, one each in car, Machine room and near ground floor landing door complete all as specified. (make: OTIS/ M/s. Kone India/ M/s. Schindler/ M/s. Mistibishi)

Design, Supply, Install, Testing and commissioning passenger lift suitable to carry 13 Passnager (884 Kg) at a speed 1.5 mtr per second, lift with single speed motor 415 volts, 3 Phase, AC 50 H2 supply conforming to IS-14665 suitable to serve G + 8 upper floor with AC variable voltage and variable frequency drive (vvv f drive) complete with all standard accessories simplex automatic and manual dual controlled operation with/withoutattendant, centre openign doors with door drive (Electric motor dirven mechanism) sliding stainless steel doors, automatic resure drive (ARD) system. 3D infrared sensor in full height of door and built in announcing system without hand set (05 Nos, one each in car, Machine room and near ground floor landing door complete all as specified. (make: OTIS/ M/s. Kone India/ M/s. Schindler/ M/s. Mistibishi)

EXTERNAL WATER SUPPLY Cutting of Extg CI/DI Pipe line of any size above 150 mm to 1000 mm bore with 80 mm brass ferrule including material & labour.

Supply and laying of ductile iron pipe, spigot and socketed including specials class K-7 complete all as specified of size 150 mm dia. Note :- Excavation and Joints will be measured and paid for seperately under respective item.

Supply and laying of ductile iron pipe, spigot and socketed class K-7 complete all as specified of size 100 mm dia. Note :- Excavation and Joints will be measured and paid for seperately under respective item.

M&l for DI fittings such as bends (any type, radius and angle Tapper any type(Straight, bends increasing, decreasing or double socket etc), Tee piece, single branch, Y Juction double branch, Cross (all socket or socet and spigot or flanged, collers, caps and plug etc comlete all as specified.

Supply and fixing sluice valve of following size duly flanged and conforming to IS-14846 and of class PN 1.00 complete all as specified of 150mm dia.

Supply and fixing sluice valve of following size duly flanged and conforming to IS-14846 and of class PN 1.00 complete all as specified of 100 mm dia.

Supply and fixing sluice valve of following size duly flanged and conforming to IS-14846 and of class PN 1.00 complete all as specified of 80 mm dia.

S&F CI Air release valve with single air out let conforming to IS-14845 of size 50 mm bore and cast iron water suitable for mains of 150 mm dia complete all as specified.

Supply and fix Cast Iron NRV with single air Outlets, conforming to IS 14845 of size 150 mm dia complete all as specified and directed with necessary fittings etc.

Supply and fix strainer 'Y' type size 150 mm dia complete with fittings all as specified and directed.

M&L for construction of stone masonry valve pit as per of size 90 x 90 x90 cm (internal dimesion complete with 40 x 40 x6 mm MS angle iron frame, 3mm thick MS Top cover with locking arrangement including two coat of black bitumionous paint over a coat of red oxide primer on steel surface all as specified and directed

M&L for construction of stone masonry valve pit as per of size 60 x 60 x60 cm (internal dimesion complete with 30 x 30 x6 mm MS angle iron frame, 3mm thick MS Top cover with locking arrangement including two coat of black bitumionous paint over a coat of red oxide primer on steel surface all as specified and directed

Supply and fixing of bulk water meter CI body for 80mm dia pipeline.

Supply, install, test and commissioning pump set centrifugal monoblock of capcity 10 WHP electric driven 3 phase 415V, 50 HZ 900 LPM at 70 mtr head complete with starter panel having suitable type automatic starter, Individual control MCBs and main control MCCB, digital type volt meter, digital type Ammeter indicator lamp etc. with necessary suction side GI pipe medium grade, GM floot valve & PCC foundation etc. complete all as specified and directed.

Supply, install, test and commissioning micro processor based constant current technology water disinfection equipment using silver ionistion process based on oligodynamic technology, suitable to provide directly to pumping main, or to sump or to over head tank. The water chamber is to be made of corrosion free stain pipes and investment casting fittings conforming to SS 304 capable to withstnad a pressure of 10 LSC and with in built silver electrodes made from pure silver after proper metallurgical treatment and chemicasl treatment for dissipating of minute ionic silver disinfectant suitable for dual ionisation plant of 0.25 lakh litres capacity. This silver electrode must also be non toxic to humans. All this will be mounted in powder coated mild steel cabinet o f1.6 mm thick with universal lock and key for safety. The control panel with electrode OK indication to show that the electrode is working clear electrode indication to show that the electrode is clogged and change electrode indication to show that the electrode is nearing completion for easy maintenace of the equiptment. The disinfectant produced by the electrode is totally non toxic at the dosed levels as prescribed by W.H.O (World Health Organistion) standards. The equipment is suitable to operate on single phase 220Volts, 50 Hz power supply. The life of electrode shall be 900 Milion litres with the dosage of 0.01 PPM of silver. Make:- M/s Bharti waters Pvt Ltd model No BW/ECO 25 or approved model of make in M/s Jyothi waters India (Pvt) Ltd M/s Pious water Pvt Ltd. or Equivalent

FIRE FIGHTING Active full function repeater panel complies with EN54-2, Network up to 64 panel/repeater, Programmable one touch test mode, Powerfull and versatile cause and effect programming, Cause and effect wizard including: cause and effect action, disablement comfiguration, test mode comfiguration 5.25 amp power supply to EN54 part 4, large graphic display, in built help and alarm information screen, Real time clock, stylish enclosure design, soft touch tactile buttons 2 programmable fucntion buttons, 3 programmable front panel mounted LEDs, Improved front loading printer (optionlal) up to 512 programmable inputs and output pertanel via 2 wire RS485 serial link (Optional) simple/window grafical configuration utility anf IP 50 protection.

Supply and installation, testing and commissioning of 2C X 1.5 sqmm twisted pair copper cable ISI market with proper clamping, supports and terminations.

Supply and Installed pressure switch/press box for indication for passage in the pipe suitable for operating pressure as per manufacturer design.

SOLAR WATER HEATER Supply,Installation,testing and commissioning of solar water system (Flat plate collector) with electrical heating back up with heat exchanger of heat of capacity 3X500 LPD capacity with suitable staging of height as per OEM recommendation made out of angle/flat iron duly painted complete.

S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1500 ltrs capacity hoisted and fixed in position all as specified

COMPREHENSIVE MAINTENANCE OF LIFTS:- Comprehensive maintenance of Electricity operated passenger lift (02Nos 544KG capacity and 02 Nos 884 KG Capcity) through OEM to serve ground plus Eight upper floors all as mentioned in the relevent items of this BOQ complete all as specified and as directed for First year after expiry of defect liability period

All as per item No 79.00 here in before but for second year after expiry of defect liability period

All as per item No 79.00 here in before but for Third year after expiry of defect liability period

Manning and operation of passanger Lift (02 Nos of capacity 544 Kgs and 02 Nos of capacity 884 kgs) of any make at above location with One operator in each shift of 08 Hours for duration of Two shifts including Sunday and holiday complete all as specified and directed (1st shift from 0600Hrs to 1400Hrs and 2nd shift from 1400Hrs to 2000Hrs)

NSC Projects Pvt. Ltd.

A2Z ENGINEERS AND PILE FOUNDATIONS

NITYA NAND AND SONS CONTRACTORS PVT LTD

NIMMA NARAYAN ENGINEERS AND CONTRACTORS