Providing New Bore Well at Sengottaiyan colony Community toilet in Ward No.30 in Gobichettipalayam Municipality.

Geophysical Investigation charges under deposit works per point

Drilling of 150mm dia borewell in Hard rock areas anywhere in Tamilnadu including transportation to the work site in hard rock areas and developing the borewell - Drilling upto 150m below ground level.

Drilling from 151m upto 180m below ground level.

Supply and erection of 150 mm CS PVC casing pipe as per IS 12818/2010 including cost and conveyance of pipe and labour charges for errecting in position, cutting threading and welding if necessary etc. complete as directed by the departmental officers

Supply and fixing of 32mm Heavy duty UPVC Pipe theraded pipe of approved quality including cost and conveyance etc., complete as per standard specifications.

Supply of 2.50 Sq.mm PVC insulated and sheathed 3 core flat type copper cable conforming to IS 694/1990 including all cost and conveyance of all materials etc complete. as per standard specifications.

Supply of 15 lpmx 150 m Head wet type 1 phase bore well 1HP submersible motor with pump set with out panel boards as per IS 8034 including cost of tranportation of materials etc,complete as per standared specification.

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth ,valves erection clamps,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter,Ammeter, three pilot(indicating)lamps capacitor single phasing preventor, water level guard and laying and jointing the caple and twin earthing as per IE rules extra complete and testing the pumpset and trail run for ten days.

Supply and erection of 1 phase panel Board with two level guard and auto start and delivery of direct online starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230V (±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). complete as per standared specification

Supply and fixing of 32Amps DP switch of 500V with metel clad with fuse and neutral (side Handle) on suitable TW Board with earth connection only.

Wiring with 2x4sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mmx100mmx113mm TW switch box for 15A 3pin non interlocking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 4sq.mm copper wire for open PVC power plug point (SD 39)

Supply and run of 2 of 4 sq.mm PVC insulated SC unsheathed CU.Conductor of 1100 V in 25 mm dia GI Pipe (Glass - B) suitably bent at ends with neccessory angle iron upright and end supports for mains. (SD 70)

Supply and run of 2 of 4 sq.mm PVC insulated SC unsheathed CU.Conductor of 1100 V on 7/20 GI bearer wire for Service Connection Mains. (SD 65)

Supply and fixing of TNEB meter Board suitable for 32A Single phase service connection with 32A fuse unit (500V) 32A neutral link and Earth link (1”x 1/8” copper flat) on TW plank of size 375mmx300mmx19mm with supporting TW repairs of 1” thick on either side with painting with suitable bolt and nuts for fixing TW plank on wall with earth connection and inter connection with 7/20 PVC insulate copper wire from EB meter to fuse unit with 1 No 40 Amp 30 MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection (SD 125)

Supply and fixing of single phase 16 Amps Porcelain Fuse Unit (500V)

Supply and fixing of Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415 / 440V 50 HZ conforming to ISS with ISI marking

Supply of 32 mm GI pipe of B class of approved quality including all cost and conveyance etc, complete, as per standerd specifiacation. (PWD SOR 25-26 M-0436)

Supply of 40mm UPVC pipe including all cost and conveyance etc, complete, as per standerd specifiacation. (PWD SOR 25-26 M-1087)

Supply and fixing of G.I. pipes specials and UPVC pipes specials etc., complete as per standard specification. - MS Clamp Set

32mm GM Gate valve

32 mm NR Valve

Bore Cover Plate

32mm GI Elbow

32mm GI Coupling

32mm GI Nipple

32 mm GI union

40mm UPVC Elbow

40mm UPVC TEE

40mm UPVC Coupling

Supplying, delivery and fixing of HDPE tank 1000 lit capacity as per IS 12701/1996 including all cost and conveyance of all materials etc, complete, as per standerd specifiacation.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

Plastering with cement mortar 1:5 (one cement five sand) mix to 12mm thick including cost and coveyance of all materials to site finishing curing etc., complete.