INTERNAL PERIODICAL SERVICES AND CERTAIN BR WORKS IN MD ACCN AT ZONE A OLD NAVY NAGAR AREA UNDER AGE BRI NAVY NAGAR COLABA

Amount

Taking down cement plaster on brick or stone walls including disposal of debris out side the MoD land etc complete as directed by Engr-in-charge.

Providing and applying fair finish 15mm thick plaster with readymix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces additives, on internal surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge.

Providing and applying fair finish 10mm thick plaster with readymix prepacked proportioned dry mix mortar fair faces concrete surfaces on ceiling including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge.

Complete removal of existing treatment on wall,etc by scrapping with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc and wash with water by skilled labour complete all as specified and directed by Engr-in-Charge.

M & L for applying 1mm thick wall care putty on walls complete all as specified and directed by Engr-in-Charge.

M & L for preparing new surfaces/putty surface of wall and apply two coats of distemper oil emulsion white or tinted over and incl one coat primer on walls complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old wall surface and applying one coat of distemper oil emulsion white or tinted complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old wall surface and applying two coat of distemper oil emulsion white or tinted complete all as specified and directed by Engr-in-Charge.

M & L for preparation of newly plastered surface of ceiling and applying two coats of distemper oil emulsion over primer , white or tinted complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old surfaces of ceiling and applying one coat of distemper oil emulsion white or tinted complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old wooden surface and apply one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old steel surface with wire brush and apply one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

S & F in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to wooden doors / windows shutter with wooden beading (any size) and fixed aluminium window / vent with aluminium wire staples complete all as specified and directed by Engr-in-Charge.

Easing of wooden door/window (complete for one No of door or window of any size and having any number of shutter) for easy opening /closing tightning, changing/adjustment of position of fittings complete all as sepcified and directed by Engr-in-Charge.

Repair of aluminium window/door (complete for one No of window or door of any size and having any number of shutter) for easy opening /closing tightning, changing/adjustment of position of rollar and other fittings complete all as sepcified and directed by Engr-in-Charge.

M & L in repairs CI Nahani trap dia of outlet 75mm with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including jointing to waste pipe complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off out side the defence land complete all as specified and directed by Engr-in-Charge.

M & L non skid coloured ceramic tiles exc 0.08 to n exc 0.18 Sqm 6 to 7mm in floors set and jonted in and pointed in coloured / white cement to match the colour of tiles and including 20 mm thick cement mortar screedbed in CM 1:6 complete all as specified and directed by Enginner-in-Charge.

M&L Ceramic tiles (square) polished, area of each tiles of 600mm x 600 mm x 7-8 mm not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20 mm thick screed bed in cement mortar 1:6 etc. complete all as specified and directed by Engr-in-Charge (Note : Cost of 20 mm thick screed bed is included in the rate). (upto 5 storey).

M&L for glazed ceramic coloured tiles 300 x 450 x 7-8mm thick as in dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement, including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed by Enginner-in-Charge.

S & F in repair PVC valveless, syphonic action type, flushing cristern, low level, white, 10 ltr capacity with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge.

M & L in repair vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonnage pipe including 'P' or 'S' trap icluding concrete and complete all as specified and directed by Engr-in-Charge.

M & L in repair vitreous china wash down water closet pedestal pattern white (excluding fixing bolts, flushing cistern and flush pipe) with 'P' or 'S' trapcomplete all as specified and directed by Engr-In- Charge.

S & F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinges devices complete all as specified and directed by Engr-in-Charge.

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completein all respect as specified Engr-in-Charge.

S & F in repair vitreous china ware wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed by Engr-in-Charge.

S & F in repairs 32 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm\ 45gms)complete all as specified and directed by Engr-in-Charge.

S & F in repair HDPE PVC pipes of pressure rating 6 kgf/Sq.cm of 40mm bore fixed complete to walls, ceiling or in floors including bend and sockets etc; any type of pipe complete all as specified and directed by Engr-in-Charge.

S & F in repair Corrugated PVC waste pipe 32/40 mm bore and 600 to 800mm long fixed with wash basin, kitchen sink and urinal etc complete all as specified and directed by Engr-in-Charge.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm.

S & F in repairs Pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.

S & F for in repair 25mm dia Powder coated aluminium curtain rod with and incl suitable bracket complete all as specified and directed by Engr-in-Charge.

S&F in repair 4mm thick plain sheet glass ordinary quality and glazing fitted in wooden window n.exc 0.5 sqm in each pane incl necessary beading for securing glass complete all as specified and directed by Engr-in-Charge.

S&F in repair 4mm thick frosted sheet glass ordinary quality and glazing fitted in metal window/louveres n.exc 0.5 sqm in each pane incl necessary beading for securing glass complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frame (w/o taking off shutters from the frames) not exc 1.50 Sqm each.

S&F factory made solid panel PVC door frame of size 50mmx47mm out of 5mm plain colour PVC sheet reinforced with M.S Square tube, all as per specification and drawing upto 4 storey.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for top rail and bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site as per specification and drawing upto 5 storey.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodized complete all as specified and directed by Engr-In- Charge.

S & F 150 mm long Aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed by Engr-In- Charge.

S & F in repair 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl 18/19mm wide and 6mm thick external teak wood lipping fixed with nails and glue to board as in cup board shutter, CB shelves and kitchen cabinate etc like work complete all as specified and directed by Engr-in-Charge.

S & F 100 mm stainless steel hinges of med grade for cupboard shutters complete all as specified and directed by Engr-in-Charge.

S&F 125mm size hasp and staple safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.

S & F in repairs 300 mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed by Engr-In- Charge.

S & F in repairs 150 mm long Aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed by Engr-In- Charge.

S & F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodized complete all as specified and directed by Engr-In- Charge.

S&F in repairs 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.

M & L for preparation of old decorated surfaces of walls by any means scrapping old surface washing the surface with Bleaching powder throughly,filling the cracks with cracks filling compound of DR Fixit crack free chemical or shrink free as per manufacturer instruction & applying one coat of weather proof acrylic based paint (100%) exterior grade including scaffolding etc all as specified & directed. a) Old surface shall be cleaned with bleaching powder as specified including biowash all as per maufacturer instructions. All Cracks etc shall be filled with white cement and Sand Mortar (1:3) by making V grooves of Appropiate size. Note: All Works shall be carried out upto G+05 storey bldg. Rate incl removal of all debries outside of MD land and necessary scaffolding & Safety Net Cloth at places.

ASHOKA TRADING CO. (BID ID -3394133)

SAHU AND SAHU CO. (BID ID -3393276)

RAMESH ENTERPRISES (BID ID -3390357)

Anil Industrial Corporation (BID ID -3392147)

JANKI ENTERPRISES (BID ID -3394180)

jkconstruction (BID ID -3393217)

GANGAJAL (BID ID -3393187)