Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 CrQualified J D INDUSTRIAL ESTATE OPP PRASAD HOTEL NEAR DAHISAR CHECKNAKA MIRA ROAD EAST THANE MAHARASHTRA 401104 | 401104 | ₹1.5 Cr | L1 | Qualified MSE, MII, Category: General |
| 2 | L2₹1.6 Cr+₹10.5 L (7.19%)Qualified 17 17 WESTON STREET WESTON STREET KOLKATA WEST BENGAL 700013 | KOLKATA | WEST BENGAL | 700013 | ₹1.6 Cr+₹10.5 L (7.19%) | L2 | Qualified MSE, MII, Category: General |
| 3 | L3₹2.1 Cr+₹63.1 L (43.2%)Qualified 89 GIDC ESTATE POR BARODA GUJARAT 391243 | VADODARA | GUJARAT | 391243 | ₹2.1 Cr+₹63.1 L (43.2%) | L3 | Qualified MII |
| 4 | L4₹2.2 Cr+₹71.5 L (49.0%)Qualified R S NO 33 39 40 1 P O BASKA BASKA HALOL HALOL PANCH MAHALS GUJARAT 389350 | PANCH MAHALS | GUJARAT | 389350 | ₹2.2 Cr+₹71.5 L (49.0%) | L4 | Qualified MII |
| 5 | L5₹2.9 Cr+₹1.5 Cr (101.3%)Qualified 1255 DEE DEVELOPMENTENGINEERS LIMITED SECTOR 14 SECTOR 14 FARIDABAD HARYANA 121007 | FARIDABAD | HARYANA | 121007 | ₹2.9 Cr+₹1.5 Cr (101.3%) | L5 | Qualified MII |
Tender Value
Refer Docs
EMD Value
Exempted
Closing Date
10 May 2025, 11:00 amClosed
Radius Bend of Nominal Diameter DN 80
ANSI B16.9
Sch40
Material ASTM SA 234 Gr WPB.
Seamless Butt Welded 30 degree Long Radius Bend of Nominal Diameter DN 100
ANSI B16.9
Sch40
ASTM SA 234 Gr WPB.
Seamless Butt Welded 45 degree Long Radius Bend of Nominal Diameter DN 100
ANSI B16.9
Sch40
ASTM SA 234 Gr WPB.
Seamless Butt Welded 60 degree Long Radius Bend of Nominal Diameter DN 100
Conforming to dimensional standard ANSI B16.9
Sch40
ASTM SA 234 Gr WPB.
Seamless Butt Welded 90 degree Long Radius Bend of Nominal Diameter DN 100
ANSI B16.9 Sch40
ASTM SA 234 Gr WPB.
Seamless Butt Welded 45 degree Long Radius Bend of Nominal Diameter DN 200
ANSI B16.9
Sch40
ASTM SA 234 Gr WPB.
Seamless Butt Welded 90 degree Long Radius Bend of Nominal Diameter DN 200
ANSI B16.9
Sch40
ASTM SA 234 Gr WPB.
Seamless Butt Welded 90 degree Long Radius Bend of Nominal Diameter DN 250
ANSI B16.9
Sch40
ASTM SA 234 Gr WPB.
Seamless Butt Welded 30 degree Long Radius Bend of Nominal Diameter DN 25. ANSI B16.9
Sch40
ASTM SA 234 Gr WPB .
Seamless Butt Welded 60 degree Long Radius Bend of Nominal Diameter DN 25.ANSI B16.9
Sch40
ASTM SA 234 Gr WPB
Seamless Butt Welded 180 degree Long Radius Bend of Nominal Diameter DN 25
ANSI B16.9
Sch40
ASME SA 234 Gr WPB .
Seamless Butt Welded 60 degree Long Radius Bend of Nominal Diameter DN 65
ASME B16.9
Sch40
SA 234 Gr WPB.
Seamless Butt Welded 45 degree Long Radius Bend of Nominal Diameter DN 80
ASME B16.9
Sch40
SA234 Gr WPB.
Seamless Butt Welded 90 degree Long Radius Bend of Nominal Diameter DN 125
ASME B16.9 Sch40
SA234 Gr WPB.
Seamless Butt Welded 60 degree Long Radius Bend of Nominal Diameter DN 50
ASME B16.9
Sch 40
SA234 Gr WPB
Seamless CONCENTRIC REDUCER of Nominal Diameter DN 50x25 with butt weld end
ANSI B16.9
Sch40
SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 100x50
ANSI B16.9
Sch40
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 100x65
ANSI B16.9
Sch40
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 125x100
ANSI B16.9
Sch40
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 150x100
ANSI B16.9
Sch40
ASME Section II SA 234 Gr. WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 150x125
ANSI B16.9
Sch40
ASME Section II SA 234 Gr. WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 80x50
ANSI B16.9
Sch40
ASME Section II SA 234 Gr. WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 200x150
ANSI B16.9
Sch40
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 250x150
ANSI B16.9
Sch40
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 80x40
ANSI B16.9
Sch40
ASTM A 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 100x40
ANSI B16.9
Sch40
ASTM A 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 65x50
ANSI B16.9
Sch40
ASTM A 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 150x50
ANSI B16.9
Sch40
ASTM A 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 200x50
ANSI B16.9
Sch40
ASTM A Bid Details 3/87 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 250x200
ANSI B16.9
Sch40
ASTM A 234 Gr. WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter Dn 100 to 80
ASME B16.9
Sch40
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter Dn 125 to 50
ASME B16.9
Sch40
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter Dn 125 to 80
ASME B16.9
Sch 40
ASME Section II SA234 Gr WPB
Seamless REDUCING TEE of Nominal Diameter DN 50x50x20 with Butt weld end
ASME B16.9
Sch 40
SA 234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter Dn 100x100x50
ANSI B16.9
Sch40
ASME Section II SA234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 100x100x65.ASME B16.9
Sch40
ASME Section II SA234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter Dn 100x100x80
ANSI B16.9
Sch40
ASME Section II SA234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 125x125x100
ASME B16.9
Sch40
ASME Section II SA234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 150x150x100
ANSI B16.9
Sch40
ASME Section II SA234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 80x80x50
ANSI B16.9
Sch40
ASTM A234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 100x100x40.ANSI B16.9
Sch40
ASTM A234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 200x200x100
ANSI B16.9
Sch40
ASTM A234 Gr WPB.
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 250x250x150
ANSI B16.9
Sch40
ASTM A234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 80x80x25
ANSI B16.9
Sch40. ASTM A234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 125x125x80
ASME B16.9
Sch40
ASME Section II SA234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 200x200x150
ASME B16.9
Sch40
ASME Section II SA234 Gr WPB
Seamless EQUAL TEE of Nominal Diameter DN 50 with Butt weld end
ANSI B16.9
Sch40
SA 234 Gr WPB
Seamless EQUAL TEE of Nominal Diameter DN 100 with Butt weld end
ANSI B16.9
Sch40
ASTM SA 234 Gr WPB
Seamless EQUAL TEE of Nominal Diameter DN 150 with Butt weld end
ANSI B16.9
Sch40
ASTM SA 234 Gr WPB
Seamless EQUAL TEE of Nominal Diameter DN 200 with Butt weld end
ANSI B16.9
Sch40
ASTM SA 234 Gr WPB
Seamless EQUAL TEE of Nominal Diameter DN 250 with Butt weld end
ANSI B16.9
Sch40
ASTM SA 234 Gr WPB
Seamless Butt Welded EQUAL TEE of Nominal Diameter DN 65
ASME B16.9
Sch40
ASME Section II SA234 Gr WPB.
Seamless Butt Welded EQUAL TEE of Nominal Diameter DN 80
ASME B16.9 Sch40
ASME Section II SA234 Gr WPB.
Seamless Butt Welded EQUAL TEE of Nominal Diameter Dn 125
ASME B16.9
Sch40
ASME Section II SA234 Gr WPB.
Seamless Butt welded CS Cap of Nominal Diameter DN 100
ANSI B16.9
ASTM A234 GR.WPB
SCH40
Seamless Butt welded CS Cap of Nominal Diameter DN 200
ANSI B16.9
ASTM A234 GR.WPB
SCH40
Seamless Butt welded CS Cap of Nominal Diameter DN 250
ANSI B16.9
ASTM A234 GR.WPB
SCH40
7764154
GEM/2025/B/6162161
Two Packet Bid
Forged Socket Welded 90 degree Bend of Nominal Diameter
120 days
D 627106, KKNPP, NPCIL, Kudankulam P.O, Radhapuram Taluk, Tirunelveli Dist
Total value wise evaluation
BOQ
4 documents required · 4 mandatory
Exempted
29 Apr 2025
29 Apr 2025
10 May 2025
Seamless Carbon Steel Fittings
Radius Bend of Nominal Diameter DN 80
Material ASTM SA 234 Gr WPB.
Seamless Butt Welded 30 degree Long Radius Bend of Nominal Diameter DN 100
ASTM SA 234 Gr WPB.
Seamless Butt Welded 45 degree Long Radius Bend of Nominal Diameter DN 100
ASTM SA 234 Gr WPB.
Seamless Butt Welded 60 degree Long Radius Bend of Nominal Diameter DN 100
Conforming to dimensional standard ANSI B16.9
ASTM SA 234 Gr WPB.
Seamless Butt Welded 90 degree Long Radius Bend of Nominal Diameter DN 100
ANSI B16.9 Sch40
ASTM SA 234 Gr WPB.
Seamless Butt Welded 45 degree Long Radius Bend of Nominal Diameter DN 200
ASTM SA 234 Gr WPB.
Seamless Butt Welded 90 degree Long Radius Bend of Nominal Diameter DN 200
ASTM SA 234 Gr WPB.
Seamless Butt Welded 90 degree Long Radius Bend of Nominal Diameter DN 250
ASTM SA 234 Gr WPB.
Seamless Butt Welded 30 degree Long Radius Bend of Nominal Diameter DN 25. ANSI B16.9
ASTM SA 234 Gr WPB .
Seamless Butt Welded 60 degree Long Radius Bend of Nominal Diameter DN 25.ANSI B16.9
ASTM SA 234 Gr WPB
Seamless Butt Welded 180 degree Long Radius Bend of Nominal Diameter DN 25
ASME SA 234 Gr WPB .
Seamless Butt Welded 60 degree Long Radius Bend of Nominal Diameter DN 65
Seamless Butt Welded 45 degree Long Radius Bend of Nominal Diameter DN 80
Seamless Butt Welded 90 degree Long Radius Bend of Nominal Diameter DN 125
ASME B16.9 Sch40
Seamless Butt Welded 60 degree Long Radius Bend of Nominal Diameter DN 50
Seamless CONCENTRIC REDUCER of Nominal Diameter DN 50x25 with butt weld end
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 100x50
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 100x65
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 125x100
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 150x100
ASME Section II SA 234 Gr. WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 150x125
ASME Section II SA 234 Gr. WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 80x50
ASME Section II SA 234 Gr. WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 200x150
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 250x150
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 80x40
ASTM A 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 100x40
ASTM A 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 65x50
ASTM A 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 150x50
ASTM A 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 200x50
ASTM A Bid Details 3/87 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter DN 250x200
ASTM A 234 Gr. WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter Dn 100 to 80
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter Dn 125 to 50
ASME Section II SA 234 Gr WPB
Seamless Butt Welded CONCENTRIC REDUCER of Nominal Diameter Dn 125 to 80
ASME Section II SA234 Gr WPB
Seamless REDUCING TEE of Nominal Diameter DN 50x50x20 with Butt weld end
Seamless Butt Welded REDUCING TEE of Nominal Diameter Dn 100x100x50
ASME Section II SA234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 100x100x65.ASME B16.9
ASME Section II SA234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter Dn 100x100x80
ASME Section II SA234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 125x125x100
ASME Section II SA234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 150x150x100
ASME Section II SA234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 80x80x50
ASTM A234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 100x100x40.ANSI B16.9
ASTM A234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 200x200x100
ASTM A234 Gr WPB.
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 250x250x150
ASTM A234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 80x80x25
Sch40. ASTM A234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 125x125x80
ASME Section II SA234 Gr WPB
Seamless Butt Welded REDUCING TEE of Nominal Diameter DN 200x200x150
ASME Section II SA234 Gr WPB
Seamless EQUAL TEE of Nominal Diameter DN 50 with Butt weld end
Seamless EQUAL TEE of Nominal Diameter DN 100 with Butt weld end
ASTM SA 234 Gr WPB
Seamless EQUAL TEE of Nominal Diameter DN 150 with Butt weld end
ASTM SA 234 Gr WPB
Seamless EQUAL TEE of Nominal Diameter DN 200 with Butt weld end
ASTM SA 234 Gr WPB
Seamless EQUAL TEE of Nominal Diameter DN 250 with Butt weld end
ASTM SA 234 Gr WPB
Seamless Butt Welded EQUAL TEE of Nominal Diameter DN 65
ASME Section II SA234 Gr WPB.
Seamless Butt Welded EQUAL TEE of Nominal Diameter DN 80
ASME B16.9 Sch40
ASME Section II SA234 Gr WPB.
Seamless Butt Welded EQUAL TEE of Nominal Diameter Dn 125
ASME Section II SA234 Gr WPB.
Seamless Butt welded CS Cap of Nominal Diameter DN 100
ASTM A234 GR.WPB
Seamless Butt welded CS Cap of Nominal Diameter DN 200
ASTM A234 GR.WPB
Seamless Butt welded CS Cap of Nominal Diameter DN 250
ASTM A234 GR.WPB
Seamless Forged Carbon Steel Fittings as per SA105
Carbon Steel Fittings
Seamless Wrought Carbon Steel Fittings as per SA234 Gr WPB Bid Details 4/87
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_7764154.pdf
GEM_BID
BuyerATC_09c6f810-d870-48d6-ae591745915559465_buyer54.mum.pdf
OTHER
list-of-categories-where-trials-are-allowed_1712126171.pdf
OTHER
gtc.pdf
OTHER
technicalspecifications_2025-04-23-12-02-30_fc87bd16b660f6d0442aafbfeb153a46.pdf
BOQ
finalboq_2025-04-23-12-02-30_2be76503b039851f2610ea03f1a0c44f.csv.pdf
BOQ
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .