REPAIR TO BOUNDARY WALL, GATES, FENCING, DRAIN, PATH AND HARD STANDING UNDER GE(MCTE) MHOW

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically porovided for complete all as directed.

Grubbing up tree trunk including cutting of trunk portion girths of the tree n.exc 30 cm, produting over ground/building digging out roots, filling hole with cement mortar (1:4) and removing of unserviceable materials from the site complete all as specified and directed.

Taking down plaster of any description and in any position in cement mortar on brick or stone walls etc including racking out joints ,hacking for key,scrubbing down with water etc complete all as specified and directed.

Dismantling post or struts (wood, steel or RCC) any section , including taking out embedded portion and making good disturbed gound complete all as directed.

Dismantling fencing of wire mesh, any type complete all as specified and directed.

S&F, in repair Galvanised 2 strand, steel Barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. all as specified and directed.

Restraining and resecuring steel barbed wires of any description including making good staples etc all as specified and directed. Note : Old serviceable galvanised barbed wire obtained under item No 6 here in before shall be used under this item.

Fixing only chain link fancing including line wires, any mesh size and type to any type of standards, rails, straining bolts including provision of binding wire or staple pins etc complete all as specified and directed.

Supply only chain link fancing, MS galvanised confirming to IS of mesh size and dia of wire all as specified and directed.

Excavation in hard/dense soil as in post holes each n.exc 0.50cum, getting out and removing excavated surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L, cement concrete in foundations, filling, bed blocks and mass concrete type (1:2:4) B-2 (using 40mm graded crushed stone aggregates) complete all as specified and directed.

S&F, mild steel angle iron posts and struts in fencing post and iron flats for securing chain link fencing including all necessary drilling bolting etc. and similar work complete all as specified and directed.

S&F, mild steel screw bolts machine made with hexagonal or square heads at one end and screwed the other , or screwed both ends each screwed and to be fitted with washers and one hexagonal or squqare nuts n. exc 5 cm long and dia of neck 10 mm all as specified and directed.

S&F, mild steel bars 10 mm dia and over cut to length bent to shape and fixed in chain link fencing to keep it straight complete all as specified and directed.

M&L, for preparation of new or previously untreated surfaces of steel n. exc 10 cm in width or girth and unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of reinforced cement concrete (reincorcement cut as required to facilitate demolition) of any description and in any position not otherwise,specifically provied for complete all as directed.

M&L, for Excavation in trenches n. exc. 1.5 m wide and not exc 1.5 m in depth for foundation , etc and getting out in hard dense soil complete all as specified and directed.

M&L, for Reinforcement cement concrete (1:2:4) (nominal mix) type B-1 (using 20 mm graded curshed stone aggregate) as in foundations, footings of columns etc complete all as specified and directed.

M&L, for Reinforcement cement concrete (1:2:4) (nominal mix) type B-1 (using 20 mm graded curshed stone aggregate) as in columns, pillars, piers posts and struts etc complete all as specified and directed.

M&L, for Reinforcement cement concrete (1:2:4) (nominal mix) type B-1 (using 20 mm graded curshed stone aggregate) as in beams, lintels, copings etc complete all as specified and directed.

Use and waste form work to sides of concrete foudations, footings for flat and rough finished surfaces of concrete complete all as specified and directed.

Use and waste form work to sides of columns, pillars posts struts for flat and rough finished surfaces of concrete complete all as specified and directed.

Use and waste form work to soffits and sides of beams, lintels etc. for flat and rough finished surfaces of concrete complete all as specified and directed.

M&L, for TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending including binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No 23.00 above but 5mm dia and over upto and including 10mm dia bars as in stirrups complete all as specified and directed.

Dismantling RCC jallies, louver etc of any description fixed in any position complete all as specified and directed.

M&L, providing precast cement concrete louvres and jallies, 35mm thick type B0 1:2:4 ( using 12.5mm graded crushed stone aggregates) and set in cement mortar 1:4 (mea-sured solid), including all mouldings but excluding frame complete all as specified and directed.

Demolition of brick work built in cement mortar or lime mortar of any description complete all as specified and directed.

M&L, for brick work using modular size sub class "B" bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per item No 28.00 above but except bricks

M&L, for cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregates) in surface channels and drain complete all as specified and directed.

M&L, for 15mm thick rendering in cement mortar (1:4), surface finished even and smooth without using extra cement complete all as specified and directed.

M&L, for plastering 15mm thick in CM (1:6) on internal face of wall ,finished even and smooth without using extra cement complete all as specified and directed.

M&L, for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L, for preparation of new plastered wall surfaces and applying two coat of cement base paint complete all as specified and directed.

M&L, for preprations of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paints complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Welding in repairs n exc 2.5cm in length of exc 9mm but n exc 20mm thick members to be welded complete all as specified and directed.

M&L, for MS framed work as in doors or gates/grill/grating/guard bars/hold fasts etc of angle,tee or any other sections including welding ,fabrication with guesset plate including a shop coat of red oxide primer,drilled holes for fixing of steel sheeting or any other sheet covering complete all as specified and directed.

M&L, for preparation of new or previously untreated surfaces of steel of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

M&L, for preparation of new or previously untreated surfaces of steel of any description, over 10 cm width or girth and unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

Demolition and breaking up drain pipes (Salt, glazed ware, AC or reingforced concrete) of 300/450mm dia, set in cement mortar complete all as specified and directed.

M&L, RCC pipe 300mm dia .class NP-2 including coller laid and jointed complete all as specified and directed.

M&L, RCC pipe 450 mm dia .class NP-2 including coller laid and jointed complete all as specified and directed.

M&L, for cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregates) bed to drain pipes of 300/400 mm including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L, 75mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregates) as in Plinth protection finished the concrete surfaces even and smooth without using extra cement and fitting joints in mixer of sand and bitumin in (1:3) complete all as specified and directed.

M&L, for 75mm thick cement concrete type D2 1:4:8 (using 40 mm graded crushed stone aggregates) as in sub base pavement etc complete all as specified and directed.

M&L, for chequered cement concrete tiles of 25cm x 25cm x 20mm thick, glossy finished, with grey cement and pigment over and including 20 mm thick screed bed in cm (1:6), set jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L, for 100mm thick cement concrete type D2 (1:3:6) using 40mm graded stone aggregate as in sub base, pavement and hard standing etc complete all as specified and directed.

M&L, for forming 12mm thick expansion joints filled with pre-formed bituminious filler and top 30mm primed and sealed with sealing compound, Grade A as in hard standing for

M&L, for Machine pressed precast concrete interlocking paver block any size and shape conforming to IS 15658-2006 of 60mm thickness, M-35Grade with grey cement and pigment over and including 25-30mm thick stone dust cushoining complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, mounds, mitred/ stopped and etc.

Chitragupta Construction

Sameer Auto Engineers

Goyal Construction

SAHYOG ELECTRIC

Jamna Constructions

M/s Shree Ganesh Traders