PROVN OF PVC TANK WITH STAGGING AT 151 BASE HOSPITAL AND PROVN OF GEYSER FOR JCOs/ORs GOVT MD ACCN AT 21 MTN DOU UNDER GE GUWAHATI

Amount

Materials and Labour for excavation in trenches not exceeding 1.5 m wide and not exceeding1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated materials exceeding 500m but nexc 1500m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Materials and Labour for plain cement concrete (1:4:8) Type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Materials and Labour for reinforced cement concrete M-25 (design mix)using 20mm graded stone agregate as in foundations, including rafts, footings, foundation beams; plinth beams, bases for columns,etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Materials and Labour for for reinforced cement concrete M-25 (design mix)using 20mm graded stone agregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Materials and Labour for for reinforced cement concrete M-25 (design mix)using 20mm graded stone agregate as in Beams, cantilever, lintels over 1.5m span complete all as specified and directed.

Materials and Labour for reinforced cement concrete M-25 (design mix)using 20mm graded stone agregate as in slabs supported on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Materials and Labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.

Materials and Labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete complete all as specified and directed.

Materials and Labour for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves, including supports, overhangs, etc. also splayed between floors and beams for fair finished surfaces of concrete complete all as specified and directed.

Materials and Labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.

Materials and Labour for mild steel TMT bars 10mm dia and over cut to length, bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Materials and Labour for mild steel TMT bars 8 mm dia and over upto and including 10mm dia cut to length, bent to shape required, including cranking, bending spirally as in stirrups, spacers and binders including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. .

Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:4) on fair faces of brickwork or concrete surface and finished the surface fair and even complete all as specified and directed.

Materials and Labour for mild steel framed work as in grills,gratings,framed guared bars,railings, etc and similar works conforming to Grade E (Fe-290) complete all as specified and directed.

Supply and Fixing Rotational moulded polyethylene water storage tanks of three layer wall construction, 5000 litre capacity (cylinderical, vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including float valve complete all as directed.

Supply and fixing 15 mm bore GI pipe medium grade with all fittings and connections and fixed to walls, ceiling or laid in floors complete all as specified and directed .

Supply and fixing 20 mm bore GI pipe medium grade with all fittings and connections and fixed to walls, ceiling or laid in floors complete all as specified and directed .

Supply and fixing 25mm bore GI pipe medium grade with all fittings and connections, laid in trenches,fixed to walls/ floors complete all as specified and directed .

Supply and fixing 50mm bore GI pipe medium grade with all fittings and connections, laid in trenches,fixed to walls/ floors complete all as specified and directed .

Supply and fixing ball valves,high pressure of PTMT with apoxy coated aluminium rode and high density plastic ball, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe complete all as specified and directed.

Supply and fixing ball valves,high pressure of PTMT with apoxy coated aluminium rode and high density plastic ball, screwed for iron pipe or brass ferrule and fixed for 25 mm bore pipe complete all as specified and directed.

Supply and fixing Gun metal gate valves with iron wheel head, screwed both ends for iron pipe, 15 mm bore and fixed in position complete all as specified and directed.

Supply and fixing Gun metal gate valves with iron wheel head, screwed both ends for iron pipe, 25 mm bore and fixed in position complete all as specified and directed.

Supply and fixing Gun metal gate valves with iron wheel head, screwed both ends for iron pipe,50 mm bore and fixed in position complete all as specified and directed.

Supply and fix Brass CP wall mixer 15 mm dia for mixing hot and cold water, screwed down for iron pipe and fixed complete all as specified and directed.

Supply and Fix PVC connection 15 mm size with PTMT nuts of lenth 450 mm complete all as specified and directed.

Cutting existing steel water tubing of any dia for addition or alteration (each cut to be measured) and screwing for new connection complete all as specified and directed.

Materials and Labour for cutting in road/ pavement etc for laying of pipes etc of any size upto an approximate width of 45cm and depth 60cm, making good disturbed surfaces by filling with compacted earth and top 15 cm filled with PCC 1:2:4 type B-2 complete all as specified and directed.

Materials and Labour for applying two coats of cement base paint over one coat of primer on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed

Materials and Labour for preparation of new or previously untreated surface of steel and iron work of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified and as directed.

Materials and Labour for construction of brick masonry valve pit of size 75x75x60cm (internal dimension) one brick thick wall built in CM (1:4) on 100mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation, and 15mm thick rendering in cement mortar (1:4) both externally and internally, external plaster shall be up to 15cm below GL, providing valve pit cover made of 3.15mm thick MS sheet/plate, including provision of hinges, handle and locking arrangement including 40X40X5mm angle iron frame fixed on top of valve pit by means of MS hold fast 40x5mm and 150mm long, embedded in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) block of size 230X200X100mm, including two coats of anti-corrosive paint over a coat of red oxide zinc Chrome primer and necessary earth work in soft/loose soil including demolition of old unserviceable existing valve pit & pit cover complete all as shown on drawing and all as specified and directed.

Materials and Labour for Point wiring with 4.00 sq mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including PVC casing capping of adequate size but not less than 25mm in width, medium grade ISI marked with all fittings and accessories including sunken mild steel terminal boxes of 1.60 mm thick grouted in wall provided with 3mm thick plustic laminated sheet top cover for PVC terminal board/boxes including one run 2.5 Sqmm (nominal area) PVC insulated unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor and connected to common earth dolly and making good disturbed surfaces of wall as per existing complete all as specified and directed.

Materials and Labour for Sub main wiring with two runs of 4.00 Sqmm (Nominal area) of single core, PVC insulated, multistranded, unsheathed, FRLS copper conductor cables 1100 Volts grade drawn into and including PVC Casing Capping of adequate size medium grade but not less than 20mm in width and 1.6mm thick with all fittings and accessories, fixed to wall/ceiling etc including one run of 2.50 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, FRLS copper conductor as earth wire and duly connected to earth dolly and mains complete all as specified and directed (Note :- PVC casing caping with two runs main cables and one run of earth wire will be measured as one length)

Supply and fix MCB, Double pole, 240 volts, 32 Amps 10 KA complete all as specified and as directed. Make : HAVELL'S Cat No. DHMGBSPF032 or equivalent as approved by GE from list of approved makes.

Supply and Fixing Metal plug and socket enclosure with socket plug top, single pole and neutral with two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 volts complete all as specified. Make-Havell,s Cat No-DHDPUSN020/DHDPUDP020 or as approved by GE from list of approved makes.

Supply and fix storage type water heater 15 litre capacity comprising with copper inner tank, heating element 2000 watt, thermostat , inlet, out let and air vent connections, BEE 5 star rating including all fixing arrangement for mounting on wall and necessary inlet and outlet water connection complete all as specified and directed. Make : USHA Model-MISTY 15 Litre or equivalent in Crompton Greaves/Bajaj.

M/S SR BUILDERS

M/S K Nath and co

M/S GOSWAMI COSTRUCTION