Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.3 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹44.1 L+₹1.1 L (2.46%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹44.4 L+₹1.3 L (2.98%)Rejected-Finance C O PULAK SAHA MAHAKAL PALLY SURYASEN PARK MAIN GATE SILIGURI 734001 DIST DARJEELING | JALPAIGURI | WEST BENGAL | 734001 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹44.7 L+₹1.6 L (3.69%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹44.9 L+₹1.9 L (4.33%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
20 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE SEVOKE ROAD POST SALUGARA DIST JALPAIGURI
SPL REPAIR TO QTR NO PR 09 TO PR 16 OF MD ACCN IN BANA SINGH VIHAR AT SEVOKE UNDER GE SEVOKE ROAD
2022_MES_529479_1
GE/SEV/07 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹82,000
Yes
12 Aug 2022
8 Jun 2022
22 Jul 2022
8 Jun 2022
20 Jul 2022
30 Jun 2022
9 Jun 2022 - 18 Jun 2022
60 days
Amount
Taking down cement plaster or lime plaster on walls /ceiling of any description from concrete or brick wall etc including raking out joints, hacking for key, scrubbing down with water and disposing off the retreived debris out side MD land including necessary scaffoldings etc complete all as specified and directed
Taking down chowkats or frames, exc 1.5 sqm but not exc 4 Sqm each with shutters (Without taking off shutters from the frame) including taking down of hold-fasts by cutting/chasing etc from existing surfaces complete all as specified and directed.
Taking down chowkats or frames, not exc 1.5 sqm each with shutters (Without taking off shutters from the frame) including taking down of hold-fasts by cutting/chasing etc from existing surfaces complete all as specified and directed.
Demolition of cement concrete in ground floors (un-reinforced) and paving not exc. 15cm thickness (below or above ground level) including removing debris outside MD land complete all as specified and directed.
M&L hardcore of broken stone or boulders of gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for providing 75mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 m and turnings) duly filled with fine sand and bitumen in the ratio of 3:1, complete all as specified and directed.
Demolition of brickwork built in cement mortar including disposal of debris, etc outside MD land, complete all as specified and directed.
M&L for brick work with fly ash brick straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for Brick work with fly ash bricks, as in half brick thick wall built in CM (1:4), complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:6) on surfaces of walls including finishing the surfaces even and smooth (without using extra cement) etc, complete all as specified and directed.
M&L for 20 mm thick rendering on fair face of brick work in CM 1:4 in two layers of 10mm each using water proofing compound in top layer only including finishing the surface even and fair(WPC shall be measured and paid seperately) complete all as specified and directed.
M&L for rendering 5mm thick in cement mortar (1:3) to ceiling and finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock, strick plate, etc Size of frame 105 x 60 mm including providing one shop coat of zinc chrome primer complete all as specified and directed.
S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc; complete, size of frame 125mm x 60mm including one shop coat of Zinc Chrome primer complete all as specified and as directed
M&L for cement concrete of 1:3:6 Type C-1 using 20 mm graded crushed stone aggregate as filling of pressed steel frame, ( lintel capings, hold fast block etc) complete all as specified and directed.
S & F factory made 35mm thick plain, framed panelled shutter (two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm veneered particle board with commerical veneering on both faces. The size of rails and stiles shall be as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated of 2nd class hard wood (Hollock/Sal/Kalasiris), complete all as specified and directed.
S&F factory made 35mm thick 2nd class hard wood (Hollock/Sal/Kalasiris), Kiln seasoned and chemically pressure treated, glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges, of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc, sizes of members of shutters as specfied in SSR Part I, Section 8, cluase 8.24 (a) ; supplied and fitted to chowkats complete all as specfied and directed.
Taking down shutter for easing and adjusting and refixing in same opening area exc 1.00 sqm and n.exc 2.00 sqm each complete all as specified and directed
S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Taking down steel window and ventilators including all fittings complete all specified and directed
S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Zinc Chrome primer complete all as specified.
All as per item No. 25 above but without glazing bar
S & F steel ventilators with top hung shutter including hinges,steel peg stay, including one shop coat of Zinc Chrome primer complete all as specified.
Dismantling steel structure, grill, grating, etc complete all specified and directed
S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly primed steel surfaces exceeding 10cm in width or girth complete all as specified and directed.
M&L for preparation of old steel surfaces and applying one coats of synthetic enamel paint complete all as specified and directed.
S&F standard aluminium section 3 track powder coated (main frame 92mmx30mm with 3 track shutter frame of 40mmx20mm) in partition / frame and door shutter, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass and wire cloth or bakelite sheet and all necessary fittings, including additional leaf consisting of galvanised wire cloth, hinges, screws, plugs, locking arrangements for windows, nylon ball bearing etc complete all specified and directed. Note : Sheet glass/wire cloth/bakelite sheet shall be measured seperately.
Supply only 4mm thick figured glass pin headed type ordinary quality fixed in steel ventilator, complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing fixed as in stair, window cill, shelve etc including 20mm thick screed bed or beding layer of cement motor 1:6 of fixing of stone complete all as specified and directed.
Supply only stainless steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.40 mm , for steel windows and doors complete all as specified and directed.
S&F MS butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.
S&F stainless steel butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy complete all as specified and directed.
S&F aluminium anodised bow handles of 150mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.
S&F cast iron Nahani trap with grating including jointing to waste pipe of 75 mm dia in and including cement concrete type B1 (1:2:4) complete all as specified and directed.
Dismantling floor, hearth or wall tiling and stone slabs including cement mortar bedding (but not backing), removing rubbish off the premises outside MD Land complete all as specified and directed.
M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
M&L for coloured 450x350x7 to 8 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM 1:4 etc, complete all as specified and directed.
S&F in repairs, vitreous China, Ist quality, squatting pan (Orissa pattern), of size 580x440mm, white, with and including 'P' or 'S' trap, integral foot rests, lime concrete bedding inlcuding dismantling existing lime concrete bedding, unserviceable connections etc and connecting up, complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified.
Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified.
Taking up or down 25mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified.
S&F 15 mm bore medium grade galvanized steel water tubing concealed with all fittings and fixed to wall/ceiling or laid in floor complete all as specified. Note:- Cutting chases & making good shall be measured seperately.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S&F 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
Cutting chases in brickwalls girth exc 10 cm but n exc 20 cm , pinning in making good to facings where required and pointing in cement mortar 1:3 for conceal water tubing etc and making good complete all as specified.
S&F in repairs wash hand basin, vitreous china white of size 550x 400mm including brackets,32mm dia waste fitting brass chromium plated and PVC waste pipe 32mm bore complete all as specified and directed.
M&L for sunken floor treatment by roughening of sides and bottom of sunken floor by picking,sweeping clean and washing down with water to remove dust etc. and 10mm thick rendering in CM(1:4) on concrete surface (bottom & sides of sunken floor) finished fair and even mixed with liquid water proofing compound 'conplast X 421 IC' mfd by M/S FOSROC chemicals (india) pvt ltd,priming coat of "Nitro proof 100" and after drying of primer applied one coat of 'Nitro proof 120' mfd by M/S FOSROC complete all as specified and directed.
S & F in repairs flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type with dual flushing system, low level,white with inlet, ball valve,float and handle including brackets, flush pipe of PVC 32mm dia complete all as specified and directed.
S&F Stop valve, 15mm bore cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, fancy type, chromium plate, with long shank and cup (concealed type) complete all as specified and directed.
S&F 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair 15 mm bore Pillar tap cast copper alloy with capsten head chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe complete all as specified and directed.
S&F in repairs 15mm size PVC connection with PTMT nuts 450mm length, complete all as specified and directed.
S&F in repairs brass chromium plated, shower rose, 125mm size, complete all as specified and directed.
S&F towel rail 600mm long of PTMT (min weight 190 grams) fixed with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed.
S&F 32mm bore high density polyethylene pipes (LDPE) of pressure rating 6 Kgf / cm2, fixed to walls, ceiling or laid in floors etc, complete all as specified and directed.
Taking down CI/PVC soil/waste and vent pipes of any length any size including fittings including cutting of holes wherever required.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified & directed.
S & F 110 mm bore PVC (SWR) Vent cowl complete all as specified & directed
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 75 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified & directed.
S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified & directed
M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over one coat of primer over and including 1-2 mm thick wall care putty ,complete all as specified and directed.
M & L for complete removal of existing surfaces of wall and applying two coats of oil bound distemper over one coat of primer over and including 1-2 mm thick wall care putty,complete all as specified and directed.
M&L for preparation of new plastered surface of walls and applying two coats of weather resistant acrylic emulsion paint over a coat of primer over and including 1-2 mm thick wall care putty complete all as specified and directed
M & L for complete removal of existing surfaces of wall and applying two coat of weather resistant acrylic emulsion paint over a coat of primer over and including 1-2 mm thick wall care putty complete all as specified and directed
M & L for preparation of new plastered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed.
M & L for complete removal of old plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed.
M&L of hard drawn steel wire fabric weight is exceeding 4Kg/Sqm, cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement complete as specified and directed.
M&L for PCC(1:2:4) type B-0, using 12. 5 mm graded csushed stone aggregate as in chajjas to achieve required slope including formwork making rounded chamfered on edges mixed with WPC @ 2% by weight of cement, complete all as specified and directed. Note: WPC shall measured and paid separately.
M&L for RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in slabs, landings, shelves complete including necessary formwork complete all as specified and directed
M& L for Mild steel TMT bars 08 mm dia. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position (RCC water tank, kitchen chimney etc) complete and removing the retreived debris out side MD land, complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks 500 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F Ball brass valves of size 20 mm bore high pressure, the polythene float and fly nut, screwed for iron pipe or brass ferrule etc, complete all as specified and directed.
S&F Anodised Aluminium alloy curtain rails 20 mm dia chromium plated, with and including fixing brackets, stops, rollers etc, complete al as specified and directed.
S&F in repair 25mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.
S&F sinks made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes; including provision and fixing cantilever brackets and connecting union to pipe, also including 40mm bore PVC waste pipe, overall size 495mm x 420mm with bowl size 410mm x 330mm x160mm, complete all as specified and directed.
S&F kitchen plate rack made out of stainless steel 1mm thick sheet with partition and size of rack 800x250x900 mm with shape and pattern as per sample kept in sample room of GE office complete all as specified and as directed.
M&L 75mm thick cement concrete 1:4:8 (type D-2) (using 40mm graded crushed stone aggregate) as in sub base, finished even and fair to achieve the topping layer of tiles, complete all as specified and directed.
M&L for chequered cement concrete tiles 30cm x 30 cm x 25 mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry in floor with grey cement mixed with pigments to match with the colour of tiles, laid over and including 20 mm thick screed bed in CM 1:4, complete all as specified and directed.
Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified.
M&L 20mm thick granite slabs of any type (table rubbed and polished) on cooking platforms set and jointed in net cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including necessary moulding at edges laid over and including 10mm thick cement mortor screed bed in cement mortor (1:3) complete all as specified and directed.
Roughening surfaces of existing roof treatment and taking out old APP membrane and removing from site including cleaning and washing down with water to remove dust etc complete all as directed.
M&L for providing, laying water proofing treatment over plastered surfaces of RCC roof shall be as under:- (a) The dried plastered surface of slab shall be painted with one coat of bituminous primer @0.4 liter/Sqm. (b) Over the primed surface a layer of APP based polymeric membrane minimum weight of 3 kg/sqm of approved manufacturer minimum 3mm thick, reinforced with polyster non woven fabric (weighing not less than 160gms/sqm) shall be laid by torch application method. The side over laps of membrane shall be minimum75mm and the end laps shall be minimum 100mm and sealing all overlaps and joints shall be done as per manufacturer's instruction. (c) The finished surface shall be given Aluminium paint @ 0.11 Kg/Sqm on APP as per manufacturer's instructions. Make:-M/S TEXSA INDIA LTD (MOPLY-FP) / M/S STP LIMITED (SUPER THERMOLAY) / IWL INDIA LIMITED (HYPERPLAS)/M/S Tiki Tar Danosa (India) Pvt Ltd (Hydro Stop)/M/s Supreme Bituchem India Pvt Ltd (Super Shield)
M&L for 20 mm thick rendering in Cm (1:4) over RCC roof surface to receive roof treatment finished even and smooth without using extra cement mixed with water proofing compound as per manufacturers instruction (WPC shall be measured and paid separately).
M&L for 40 mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof padding finished even and smooth using extra cement complete all as specified.
S & F 2nd class hard wood (SAL) plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed
M & L 18/19mm thick preliminated partical board grade 1 quality exterior grade type fixed with screws to timber frame work as in cup board, shelves etc complete all as specified.
M& L for Hasp and staple, safety type, aluminium anodised 100 mm including bolt to hinge plate and fixed with screws complete as specified and directed.
S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified in SSR Part I and directed
Re-writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm height with synthetic enamel paint complete all as specified.
Taking down carefully old unserviceable copper/aluminium point wiring (light,Exchaust fan, socket or power) complete incl fittings such as switches,ceiling roses, pendents, regulators,bells,sockets,tube light fittings etc, and making good disturbed surface of walls & floors etc complete all as specified and as directed.
Taking down old unserviceable Main Switch, DB's consisting of MCBs wooden/GI/MS sheet board etc for kept in store and for later use all as directed.
Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces all as directed.
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item Sl No - 108 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.
All as per Item Sl No - 108 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.50 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.
All as per Item Sl No - 108 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.
All as per Item Sl No - 108 here in before but for light point controlled by 2 way switch with 1.5sqmm FRLS wires all as directed
M & L for Switch Socket combination 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.
M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.
M & L for Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete as directed.
S&F switch piano, plush type single pole 5 Amp 230 Volt all as specified and as directed.
S&F ceiling rose , 3 phase/ PVC/ plycarbonate, isolated body all specified and as directed.
S & F Bell Push Flush type 5 Amp, 240 volt all as specified.
S & F Bell Ding-Dong AC 230 V Single Pole complete all as specified and as directed.
S&F switch piano, surface type single pole 2 way, 5 Amp 230 Volt all as specified and as directed.
Taking down existing u/s FTL light fitting and S&F in repair decorative box type 4 feet fitting with LED tube 20 watt with Al extruded batten luminaire for 230 volt AC,including LED tube 20 Watt complete all as directed by EIC.
M&L LED street light of capacity 40 watt in Aluminium PDC housing, with IP66 protection complete all accessories with frame and connecting PVC copper wire not exc 5 mtr all directed.
Taking down existing u/s FTL light fitting and S&F in repair decorative box type fitting with LED tube 09 watt 2 feet with Al extrudedbatten luminaire for 230 volt AC,including LED tube 10 Watt complete all as directed by EIC.
Taking down ceiling fans/exhaust fan of any size,dismantling blades and removing fan and blades to MES store complete all as specified and directed.
S&F in repair 5 star energy efficient ceiling fan 230V, 1200 mm sweep with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed.
S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete all as specified and directed.
S&F in repair exhaust fan AC, single phase, 230/240 V, of size 230 mm sweep steel/aluminium metal body with louvers including making holes on wall & making good the distrubed surfaces with all connecting arrangements complete all as specified and directed.
Supply & Fixing DB with sheet metal enclouser 240 volts, 12 way, SPN double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
Supply & Fixing MCB double pole (DP) 240 volts of capacity 32 Amp ,C curve, complete all as specifie and as directed.
S&F MCB, SP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as directed.
Supply & Fixing TP&N DB 4 way with sheet metal enclouser 415 volts, double door for MCB including cutting chases exc 10 cm but not exc 20 cm girth for DB and making good distrubed surface area complete all as specified and as directed.
S&F MCB TPN 63Amp four pole 415 volt breaking capacity 16KA adjustable thermal and adjustable magnatic complete all as directed.
Taking down existing unserviceable light fitting and S&F in repair surface mounted square slim & elegant downlight panel for indoor application with high aesthetic for soothing light pattern LED luminare 15w, 230 volts including driver and necessary fixing arrangements complete all as specified and as directed.
Material and labour for concealed sub main wiring with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead including common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.
Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/loose type soil getting out and levelling of bottom surface to required level complete all as specified and directed.
Returning,filling in,including spreading,levelling,watering and well ramming in layers not exceeding 25 cm thick all as specified and as directed.
Removing excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and as directed.
Supply and laying in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16sq mm 4 core including making necessery connections all as specified and as directed.
Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.
Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.
Supply and fix GI pipe 40mm bore medium grade for cable protection complete all as specified and as directed.
M&L for Butt hinges of size 100mm, heavy weight, cold rolled mild steel and fixed as directed
SHRI JAYANTA GHOSH
MARWA CONSTRUCTION
SRI SURAJIT SENGUPTA
M S ALOK SAHA
D.D. BROTHERS
TAPASH SAHA
M/S SUBRATA JOARDAR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .