INTERIOR OF SUITES GOKUL VISHRANTI GRAH

Amount

Labour charge of plumber for toilet fixtationas per design approved by Architect or Engineer-in-Charge.

Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) Above 3601 Cm2 Slabs. wash basin table top, ledge wall top complete in all respect Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete . Granite/Kota Stone Work Full Edge moulding. as per design approved by Engineer-in-Charge.

P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 1200mm MAKE: Varmora, AGL, Kajaria as per approved by Architect & Engineer in Charge.

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on floor, walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).upto 8' height Size 600mm x 1200mm MAKE: Varmora, AGL, Kajariaas per approved by Architect & Engineer in Charge.

Providing and fixing White Vitreous Rimless, Blind Installation Wall Hung WC with UF soft close seat cover, Hinges, Accessories set, Size: 360x500x330 mm complete in all respect MAKE: Jaquar/hindware/cera as per approved by Architect & Engineer in Charge.

Providing and fixing White Vitreous Rimless, Blind Installation Wall Hung WC with UF soft close seat cover, Hinges, Accessories set, Size: 380x520x365 mm complete in all respect MAKE: Jaquar/ hindware /cera as per approved by Architect & Engineer in Charge.

Providing & fixing of flushing cistern Single Piece Concealed Cistern Body (Front or Top Actuation) with Floor Mounting Frame, Installation Kit and “P-Type” Drain Pipe Connection Set for Wall Hung WC (without Flush Control Plate) of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. MAKE: Jaquar/ hindware/cera as per approved by Architect & Engineer in Charge.

Providing & fixing of flushing cistern control plate MAKE: Jaquar/hindware/cera as per approved by Architect & Engineer in Charge.

Providing and fixing wall hung BIDET with Blind Installation. Size: 360x515x360 mm MAKE: Jaquar/hindware/cera as per approved by Architect & Engineer in Charge.

Providing and fixing counter top Wash basin of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete. Size: 700x435x135 mm MAKE: Jaquar/hindware/cera as per approved by Architect & Engineer in Charge.

Providing and fixing counter top Wash basin of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete. Size: 575x430x175 mm MAKE: Jaquar/hindware/cera as per approved by Architect & Engineer in Charge.

Providing & Fixing Premium quality Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange as per approved by Engineer in Charge.

Providing & Fixing Single Lever 1-Hole Bidet Mixer with Popup Waste System with 375mm Long Braided Hoses. MAKE: Jaquar/hindware/cera as per approved by Engineer in Charge.

Providing & Fixing Exposed Part Kit of Single Lever Basin Mixer Wall Mounted Consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout MAKE: Jaquar/hindware/cera as per approved by Engineer in Charge.

Providing & Fixing Bath Spout with wall flange MAKE: Jaquar/hindware/cera as per approved by Engineer in Charge.

Providing & Fixing Exposed Part Kit of Single Lever Shower Mixer with 3-way diverter MAKE: Jaquar/hindware/cera as per approved by Engineer in Charge.

Providing & Fixing Victorian Shower Head Round ø200mm (Bell Type) Single Flow (Body & Face Plate Brass) with Rubit Cleaning System MAKE: Jaquar/hindware/cera as per approved by Engineer in Charge.

Providing & Fixing Shower Arm Straight ø20mm & 450mm Long Round Shape without Bend for Wall Mounted Showers with Flange MAKE: Jaquar/hindware/cera as per approved by Engineer in Charge

Providing & Fixing Wall to wall enclosure with one fixed glass and one openable door fixed with the glass Glass: 8mm Dimension:H: 1950 W: 1601 - 2000 Finish: Chrome MAKE: Jaquar/hindware/cera as per approved by Engineer in Charge

Providing & Fixing Corner enclosure with 2 fixed glass and 1 openable door fixed with front panel Glass: 8mm Finish: Chrome Dimension:H: 1950 W: 1600 - 2000 Finish: Chrome MAKE: Jaquar/hindware/cera as per approved by Engineer in Charge

Providing & Fixing Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook

Providing & Fixing Exposed Part Kit of Concealed Stop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal

Providing & Fixing Angular Stop Cock with Wall Flange

Providing & Fixing Premium quality stainless steel towel rail 600mm long as per approved by Engineer in Charge.

Providing & Fixing Premium quality Towel Ring Round with Round Flange as per approved by Engineer in Charge.

Providing & Fixing Premium quality Toilet Roll Holder with Stainless Steel Flap as per approved by Engineer in Charge.

Providing & Fixing Premium quality toilet paper Roll Holder as per approved by Engineer in Charge.

Providing & Fixing Premium quality Double Coat Hook as per approved by Engineer in Charge.

Providing & Fixing Premium quality Glass Shelf 600mm Long as per approved by Engineer in Charge.

Providing & Fixing Premium quality Towel Rack with Lower Hanger (Stainless Steel) with hook as per approved by Engineer in Charge.

Providing & Fixing Premium quality Towel Rack 600mm Long with Lower Hangers, Stainless Steel as per approved by Engineer in Charge.

Providing & Fixing Premium quality Robe Hook as per approved by Engineer in Charge.

Providing & Fixing Premium quality Double Arm Wall Mounted Reversible Plain / Magnifying (X3) Pivotal Mirror as per approved by Engineer in Charge.

Providing & Fixing Premium quality Swivel Mirror as per approved by Engineer in Charge.

Providing & Fixing Premium quality Corner Glass Shelf (with Bracket) as per approved by Engineer in Charge.

Modify internal fittings & outer pvc pipeline of all toilets and addition of new points as architectural dwgs including removal of old pipeline & fixing new with material & labour cost as per approved by Engineer in Charge.

FLOORING

P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 1200mm MAKE: Varmora, AGL, Kajaria as per approved by Architect & Engineer in Charge.

P & F 1st quality Heavy Duty Vitrified Double Charged tiles on skirting in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 1200mm MAKE: Varmora, AGL, Kajaria as per approved by Architect & Engineer in Charge.

Repair works of plaster after electrical & sanitary works

providing 4mm groove in plaster above skirting

WOODWORK

Providing and fixing wood panelling on door frames with 12mm ply and 4mm veneer finished with melamine polish as per approved by Architect & Engineer in Charge.

Providing and fixing external grade board solid core single leaf flush door shutters : 30 mm thick with approved fittings & Decorative teak veneer both side and external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters finished with Melamine polish complete in all respect as per approved by Architect & Engineer in Charge.

Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters & ss wire mesh shutter for windows and clerestory window with approved fittings . Panelling for panelled and glazed shutter 25 mm to 40 mm thick Wood panel grade 1 Nigeria wood Grade 1 finished with melamine polish complete in all respect as per approved by Architect & Engineer in Charge.

Providing & fixing wall panelling 12mm base marine ply with decorative panel as per design as per approved by Architect & Engineer in Charge.

25mm thick POP molding on sofa back wall @ living room as per approved by Architect & Engineer in Charge.

WALL FINISHES

Providing and applying plaster of gypsum punning over plastered surface to prepare the surface even and smooth complete as per design as per approved by Architect & Engineer in Charge.

Providing and applying superior quality emulsion for wall painting with Velvet touch/Royal paint etc of approved brand and manufacture to give an even shade with putty and preparation of surface applying with the help of paint roller the work 3 coat complete in all respect as per direction of Engineer-in-charge.

Providing and applying wall painting textures of approved brand and manufacture as per direction of Engineer-in-charge.

Providing and applying superior quality emulsion for ceiling painting with Velvet touch/Royal paint etc of approved brand and manufacture to give an even shade with putty and preparation of surface applying with the help of paint roller the work complete in all respect as per direction of Engineer-in-charge.

FALSE CEILING

Providing and fixing 12.5 mm thick tapered edge gypsum board at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. make saint gobain

Providing and fixing ACP false ceiling including providing and fixing of frame work

Providing cove with vertical PATTA in gypsum board including providing and fixing of frame work

Providing and cutting of gypsum false ceiling for fixing of light fixtures as per direction of Engineer-in-charge.

FURNITURE

SOFA # 1 Material & Subtype Leather - Semi Aniline Leather Frame Material Solid Wood Upholstery Material Leather Seat Material Leather Leg Material Stainless Steel Finish Matte Colour & Colour Family Brown - Mushroom Brown Dimension (W)1960mm X (D)880mm X (H)760mm Seating Capacity 3 Seater Seating Height 450mm as per approved by Architect & Engineer in Charge. Make: DURIAN/GODREJ

SOFA # 2 Upholstery Material Leather Seat Material Leather Leg Material Synthetic Fibre Finish Matte Colour & Colour Family Brown - Tan Brown Dimension (W)2110mm X (D)960mm X (H)880mm Seating Capacity 3 Seater Seating Height 410mm as per approved by Architect & Engineer in Charge. Make: DURIAN/GODREJ

LOUNGE CHAIR WITH ROUND TABLE Material & Subtype Marble - Stone,Metal,Leatherette Upholstery Material Leatherette Seat Material Leatherette Leg Material Metal Finish Matte Colour & Colour Family White,White - Cream White,Gold,Grey - Ash Grey Dimension Of Table (W)600mm X (D)600mm x (H)740mm Dimension Of Chair (W)440mm X (D)520mm X (H)820mm Seating Capacity 2 Seater Seating Height 470mm Material & Subtype Marble - Stone, as per approved by Architect & Engineer in Charge. MAKE: DURIAN/GODREJ

CONSOLE TABLE Dimensions: H 36” x W 48” x D 12” Primary Material: Green panel Engineered plywood, Veneer, Sirca / Asian polish with APOLLO/Jindal/TATA Metal Steel Frame. Color: Walnut, Finish: Matt Finish, Style: Modern as per approved by Architect & Engineer in Charge.

COFFEE TABLE # 1 Made of premium quality and resilient metal. Strong marble top for holding objects of any temperature. Dimension (In Inches): Height 16 (Big table) Height 14 (Small table) Marble size (In Inches): 42 (Big table) 36 (Small table). Metal frame size (In Inches): 40 (Big table) 34 (Small table) as per approved by Architect & Engineer in Charge.

COFFEE TABLE # 2 Material & Subtype Stone - Marble,Engineered Wood - MDF Table Top Material Marble Leg Material Metal Finish Glossy Colour & Colour Family White - Beige White Dimension (W)1305mm X (D)700mm X (H) 455mm Table Top Thickness 10mm as per approved by Architect & Engineer in Charge. Make: DURIAN/GODREJ

SIDE TABLE # 1 Material & Subtype Solid Wood - Beech Wood,Engineered Wood - MDF,Veneer - Steam Beech Veneer Table Top Material Veneer Frame Material Solid Wood Leg Material Solid Wood Finish Matte Colour & Colour Family Brown - Dark Oak Dimension (W)650mm X (D)455mm X (H)755mm as per approved by Architect & Engineer in Charge. Make: DURIAN/GODREJ

SIDE TABLE # 2 Material & Subtype Solid Wood - Beech Wood,Engineered Wood - MDF,Veneer - Steam Beech Veneer Table Top Material Veneer Leg Material Solid Wood Finish Semi-gloss Colour & Colour Family Brown - Walnut Dimension (W)670mm X (D)600mm X (H)760mm as per approved by Architect & Engineer in Charge. Make: DURIAN/GODREJ

TV CONSOLE # 1 Finish Color: Beige & Cream Dimensions W x H x D (cm): 220 x 45 x 42 Style: Contemporary & Modern Primary Material: Rubber Wood as per approved by Architect & Engineer in Charge. Make: DURIAN/GODREJ

TV CONSOLE # 2 Material & Subtype Stone - Marble,Engineered Wood - MDF,Metal,Solid Wood - Pine Wood Table Top Material Marble Frame Material Engineered Wood Leg Material Metal Finish Glossy Colour & Colour Family Grey - Ash Grey,White Dimension (W)1995mm X (D)400mm X (H)450mm as per approved by Architect & Engineer in Charge. Make: DURIAN/GODREJ

TV CONSOLE # 3 Material & Subtype Stone - Marble Table Top Material Marble Leg Material Solid Wood Finish Glossy Colour & Colour Family Grey Dimension (W)(2000-2700)mm X (D)350mm X (H)480mm as per approved by Architect & Engineer in Charge.

BENCH @ Living room Overall Dimensions: 63"W x 19.7"D x 17.7"H (1600mmW x 500mmD x 450mmH) Seat Height: 17.7"/450mm Color Options: White Upholstery Materials: Velvet Seat Fill Material: Foam Frame Material: Solid Wood as per approved by Architect & Engineer in Charge.

UPHOLSTERED BED with headboard # 1: Material & Subtype Engineered Wood - MDF, Fabric - Velvet 1 Frame Material Engineered Wood Upholstery Material Velvet Leg Material Metal Finish Matte Colour & Colour Family Brown - Dark Brown Dimension (W)2135mm X (D)1970mm X (H)1315mm Seating Height 355mm as per approved by Architect & Engineer in Charge.

BED-SIDE TABLE # 1 Material & Subtype Engineered Wood - MDF, Fabric - Velvet Table Top Material Engineered Wood Upholstery Material Velvet Finish Matte Colour & Colour Family Brown - Dark Brown Dimension (W)510mm x(D)400mm x(H)540mm as per approved by Architect & Engineer in Charge.

UPHOLSTERED BED with headboard # 2: Material & Subtype Engineered Wood - MDF,Solid Wood - Beech Wood,Fabric - Velvet Frame Material Engineered Wood Upholstery Material Velvet Leg Material Solid Wood Finish Matte Colour & Colour Family Grey - Ash Grey Dimension (W)2030mm X (D)2150mm X (H)1410mm Seating Height 395mm Size King as per approved by Architect & Engineer in Charge.

BED-SIDE TABLE # 2 Material & Subtype Engineered Wood - MDF,Fabric - Velvet Table Top Material Engineered Wood - HDF Upholstery Material Velvet Finish Matte Colour & Colour Family Brown - Dark Brown,Grey - Ash Grey Dimension (W)515mm X (D)400mm X (H)535mm as per approved by Architect & Engineer in Charge.

MATTRESS # 1 Dimension 78x72x8" Firmness Medium Soft Mattress TypeFoam & Spring with Euro Top Fabric Type Knitted fabric with foam quilting MAKE Duroflex/ sleepwell as per approved by Architect & Engineer in Charge.

MATTRESS # 2 Dimension 78x72x8" Firmness Medium Soft Mattress TypeFoam & Spring with Euro Top Fabric Type Knitted fabric with foam quilting MAKE Duroflex/ sleepwell as per approved by Architect & Engineer in Charge.

MATTRESS PROTECTOR Dimension 78x72x8" Features Antiviral, Antibacterial, 100% Waterproof, Safe For Skin Washable Machine Washable Material 80% cotton & 20% polyester MAKE Duroflex/ sleepwell as per approved by Architect & Engineer in Charge.

COMFORTOR Dimension 100x90 (2.54 x 2.28) Soft, cosy & reversible comforter with 100% microfibre filling MAKE Duroflex/ sleepwell as per approved by Architect & Engineer in Charge.

PILLOW SET Dimension 27x17x5 Filling Type Microfibre Fabric Type Antimicrobial viscose blend MAKE Duroflex/ sleepwell as per approved by Architect & Engineer in Charge.

BED LINEN Dimension 108x108 Fabric Blend 100% Cotton Thread Count 200 TC MAKE Duroflex/ sleepwell as per approved by Architect & Engineer in Charge.

DAY BED Material:Fabric, Leather, Wood Fabric – Anthracite, Beige, Chocolate, Elephant, Steel, Pearl-02, Taupe-09, Toffee-04 Leather – Woody, Musk Size: Width: 180 cm | Depth: 86 cm | Height: 88 cm CONTEMPORARY DESIGN - With braided buttons, waffle stitching, and soft upholstery, Button Waffle Stitching: Button stitching on the seat Bolster Pillow: This lounger includes a matching rolled pillow, Solid Wooden Legs: This lounger is supported by tapered Solid wooden legs as per approved by Architect & Engineer in Charge.

DESK Study Table (Teak Finish, Creamy Crust) Dimensions119.0 cm x 131.0 cm x 60.0cm Configuration : Modular Finish Type : Matte No. of Drawers : 2 Material : Solid Wood Material Subtype : Wood as per approved by Architect & Engineer in Charge.

DESK CHAIR upholstered Length: 155 cm (61 ") Max. length: 215 cm (84 5/8 ") Width: 87 cm (34 1/4 ") Height: 74 cm (29 1/8 ") wooden legs as per approved by Architect & Engineer in Charge.

OTTOMAN Round Ottoman with Wood Legs Blue Velvet Upholstery Pouf SIZE 50 X 50 X 40 CM as per approved by Architect & Engineer in Charge.

CARPET @ living room Size 9 feet x 14 feet Material: Premium High quality Wool Construction: Hand tufted, Durable cotton canvas backing as per approved by Architect & Engineer in Charge.

CARPET @ bed room Size 8 feet x 10 feet Material: Premium High quality Wool Construction: Hand tufted, Durable cotton canvas backing as per approved by Architect & Engineer in Charge.

Full Height mirror with wooden frame with dimension 750 x 1800 +- 50 mm as per design as per approved by Architect & Engineer in Charge.

Bathroom vanity mirror LED Backlit Mirror with Border Item Shape Rectangular Frame Material Alloy Steel Mounting Type Wall Mount Finish Type PaintedDimensions: 19.68"W x 27.56"H x 2"D Energy Efficient White LED Lights - 6000K (LED light source is approved for IP44 and tested and approved for bathroom use) CE Certified 110V On/Off Sensor Switch White Painted Steel Base. as per approved by Architect & Engineer in Charge.

BENCH @ BED Queens Solid Wood 2 Seater Bench Product Dimensions61.0 cm x 140.0 cm x 46.0 cm Legs Material :Acacia Wood Material :Solid Wood Material Subtype :Acacia Wood as per approved by Architect & Engineer in Charge.

4 SEATER DINING TABLE with CHAIRS MATERIAL & SUB TYPE Sheesham wood seating height : 28" Structure: Sheesham wood Dimension: w-4' x d-2' x h-28" Cushioning: polyster Top thickness: 18mm as per approved by Architect & Engineer in Charge.

SERVER UNIT High Gloss Sideboard (White Finish) Product Dimensions80.0 cm x 150.0 cm x 45.0 cmcl. Style :Modern No. of Doors :2 No. of Drawers :3 No. of Shelves :4 Legs Material :Mdf Secondary Material Subtype :Particle Board Material :Engineered Wood Material Subtype :Mdf as per approved by Architect & Engineer in Charge.

Curtain set @ living room 11'-0" (W) X 11'-0" (H) including 2 nos sheer curtains and 2 nos. blackout curtain with ceiling mounted track of length 11 feet as per approved by Architect & Engineer in Charge.

Curtain set @ Bedroom 11'-0" (W) X 11'-0" (H) including 2 nos sheer curtains and 2 nos. blackout curtain with ceiling mounted track of length 11 feet as per approved by Architect & Engineer in Charge.

Curtain set @ living room 11'-0" (W) X 11'-0" (H) including 2 nos sheer curtains and 2 nos. blackout curtain with ceiling mounted track of length 11 feet as per approved by Architect & Engineer in Charge.

Curtain set @ Bedroom 11'-0" (W) X 11'-0" (H) including 2 nos sheer curtains and 2 nos. blackout curtain with ceiling mounted track of length 11 feet as per approved by Architect & Engineer in Charge.

WARDOBE # 1 Providing & fixing of wardrobe with dimenssion 1050 x 550 x 2100+- 50 mm with superior quality 18 mm ply used and duly pasted 1mm laminate on all sides white visible or not visible with 2 mm PVC edge bend on all visible side and 1 mm edge bend on non visible area Make :- Green/Century/Marino as per approved by Architect & Engineer in Charge.

WARDOBE # 2 Providing & fixing of wardrobe with dimenssion 2400 x 550 x 2100+- 50 mm with superior quality 18 mm ply used and duly pasted 1mm laminate on all sides white visible or not visible with 2 mm PVC edge bend on all visible side and .8 mm edge bend on non visible area Make :- Green/Century/Marino as per approved by Architect & Engineer in Charge.

LUGGAGE CONSOLE # 1 Providing & fixing of luggage console consisting of stone top with dimenssion 1800 x 550 +- 50 mm with superior quality 18 mm ply used and duly pasted 1mm laminate on all sides white visible or not visible with 2 mm PVC edge bend on all visible side and .8 mm edge bend on non visible area as per approved by Architect & Engineer in Charge.

LUGGAGE CONSOLE # 2 Providing & fixing of luggage console consisting of stone top with dimenssion 1050 x 550 +- 50 mm with superior quality 18 mm ply used and duly pasted 1mm laminate on all sides white visible or not visible with 2 mm PVC edge bend on all visible side and .8 mm edge bend on non visible area as per approved by Architect & Engineer in Charge.

Providing 50litre referigerator of metal body and energy consumption of 100 watt with automatic defrost as per approved by Architect & Engineer in Charge.

Providing digital safe with electronic keyboard as per approved by Architect & Engineer in Charge.

Providing 1500 watt electric kettle stainless steel body of 1.5 l capacity as per approved by Architect & Engineer in Charge.

Providing LED tv 48" as per approved by Architect & Engineer in Charge. MAKE: SAMSUNG/LG/PANASONIC

Accessories: Decorative planter, Showpieces, Picture frame, wall art, etc.as per approved by Architect & Engineer in Charge.

wall paintings: Decorative planter, Showpieces, Picture frame, wall art, etc.as per approved by Architect & Engineer in Charge.

DECORATIVE FIXTURES

Providing and fixing Ceiling light ,LED Nerve plus round recessed type ,LED 6W*1 3000K ,ceiling mounted complete with all reqd. accessories as reqd. Make-JAQUAR code-LNEP01R006XW

Providing and fixing Ceiling light ,LED Nero round recessed type ,LED 12W*1 3000K ,ceiling mounted complete with all reqd. accessories as reqd. Make-JAQUAR code-LNEP01R012XW

Providing and fixing Ceiling light ,LED Nero round surface type ,LED 12W*1 4000K ,ceiling mounted complete with all reqd. accessories as reqd. Make-JAQUAR code-LNRO02R012SN

Providing and fixing DESK LAMP-1 LT ivory fabric shade with aluminium finishing Table lamp. Fixture height 1375(H)*240(D) MAKE- JAQUAR Model no.-STL-WHT-TL-688T

Providing and fixing FLOOR LAMP-1 LT Opal glass shade with marble base & chrome finishing floor lamp.Fixture height :1900mm ,Lamp:E-27 LED 14W*1. 1250(L)*300(D)*1900(H) MAKE- JAQUAR Model no.-KPT-CHR-ML49061A

Providing and fixing wall lamp (for bed room beside bed)-1 LT copper glass with cognac finishing wall lamp lamp. fixture height-550 ,Lamp:E-14 LED 4W* 1 130(L)*210(W)*550(H) MAKE-JAQUAR,Model no-COG-WL1216W

Providing and fixing Mirror light -2 light conical opal glass with nickel finish wall lamp ,LED 4W*2 . MAKE-JAQUAR

Providing and fixing wall lamp -2 light frosted glass with Gold finish wall lamp ,LED 4W*2 . (as per Attached sheet item no 8)MAKE-JAQUAR

Providing and fixing wall lamp -1 light matt opal glass with nickel finish wall lamp ,LED 4W*1 .MAKE-JAQUAR

Providing and fixing Strip light-1 Pack of 5 mtr ,5W/meter indoor strip of power 25W. MAKE-JAQUAR

Providing and fixing Magnetic track slim 2M surface mounted track complete as reqd. . MAKE-JAQUAR , LTRKSNTRXS

Providing and fixing orelli slim magnetic track light with die cast Aluminium housing ,48V DC Operated 7 watts-3000K complete as reqd. . MAKE-JAQUAR , LORLS24R07XW

FAN # 1 -Providing and fixing Devil"s Advocate (53"span,black finish metal body, teak wood finish wooden blades),Motor wattage 60 W ,motor input voltage220-240 V AC /50-60Hz (DC motor Fan with Adaptor),300RPM,Favn CFM 6300 with all necessary Accessories complete as reqd. . MAKE-The white teak Company BY ASIAN PAINTS

FAN # 2 -Providing and fixing Upgrade (1400mm sweep,antique bronze finish metal body, wallnut finish mdf blades),Dimmable LED light with remote control ceiling fan,Motor wattage 55 W ,motor input voltage220-240 V AC /50-60Hz (DC motor Fan with Adaptor),Holder and plug type built in dimmable LED ,No. of bulb holder 1 built in LED provided .Special features dimmable LED with remote control. Bulb wattage 40W .LED temperature 3000K-6500K .LED colour- Warm white/Day light/Cool white, with all necessary Accessories complete as reqd. . MAKE-The white teak Company BY ASIAN PAINTS

CHANDLIER # 1 - providing and fixing of 6LT frosted glass with matt gold finishing pandent with Lamp:G9 LED 4W*6 ,Fixture height:300-600mm, 1100mm(D)*1400mm(H) MAKE-JAQUAR Model no-STL-GLD-SL1153S6

CHANDLIER # 2 - providing and fixing of 24LT Trumpt style with gold finishing pandent with Lamp:E14 LED 4W*24 ,Fixture height:730mm, 1500mm(D)*1400mm-2000mm(H) MAKE-JAQUAR Model no-STL-GLD-SL1133S6

S.I.T.C, of power key card switch for cottages

Providing & Fixing of 900mm copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. MaKe-Orient/Crompton/Usha

ELECTRICAL WORKS

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr..)

Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

On board

Medium point (up to 6 mtr.)

Long point (up to 10 mtr..)

S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

1 x 1.5 sq.mm

2 x 2.5 sq. mm. + 1x1.5sqmm

2 x 4.0 sq. mm. + 1 x 2.5 sq. mm.

2 x 6.0 sq. mm. + 1 x 2.5 sq. mm.

4 x 6.0 sqmm

4 x10.0 sq. mm.

1x 4.0 sqmm

Providing & Fixing of of BLDC Technology ventilating fans , single phase with PVC impeller, ABS body, Double Ball bearing, automatic back lower shutter including making connection, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

250 mm sweep

Providing & Fixing of extra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

5 step fan regulator 2 Module 360 dgree rotating

Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

1170mm(+/-10%) LED batten with min. lumen output 2200 lm

Supply & Fixing of Dry Powder Agent (as per IS 4308:2019), ABC type Fire Extinguisher (Stored Pressure type) conforming to IS:15683:2018 , Powder coated Internal & External Surface Deep drawn cylinder body of Mild Steel CR2 grade conforming to IS: 513, Squeeze grip Forged brass release valve with Inbuilt safety release device, Diaphragm Type, 0 to 28 bar range pressure gauge, 450 mm long EPDM discharge tube, QR code for Product Traceability including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificate from OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

P & F 1.2mm thick M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Glazed door (Three phase) IK-09 and IP-43 with Metal end box

Providing & Fixing of Recessed/surface mounting heavy duty Enclosure made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted complete with din rail making internal DB terminations with copper lugs, detachable gland plate, including making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Suitable for Two / Three / Four module for MCB

Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Single pole MCB (With B/C curve tripping Characteristics)

Double pole MCB(With B/C curve tripping Characteristics)

6 A to 32 A rating

Four pole MCB (With B/C curve tripping Characteristics)

50-63 A rating

Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

35.0 Sq. mmx3.5 core

Supply and installation of high tensile low carbon steel rod molecularly bonded with 99.9 % Copper thickness (250 microns) and confirming to UL 467, IS/IEC 62561-2 of following size and length and as per point mentioned (a), (b), [c), (d), (e) below :-

(a) Bore a hole of dia. 100 mm of required length, Place the rod in the centre of Hole

(b) filled with anti corrosive conductive compounds with the permanent sealings at both the ends, CPRI/ ERDA tested with RMS capacity of minimum 30 KA for withstanding 1 second .To ensure the moisture content and electrical conductivity, 25 kg for 2000 mm & 50 Kgs for 3000mm of resistance lowering earth enhancement material shall be used as a backfill compound. The compound shall be tested form NABL acredeated lab for low resistivity ( less than 0.12 Ohm - meter ) & high conductivity in nature with carbon as a major content as per referance of IS 3043-1987,IEEE 80-2013 (clause 14.5d) , IEEE 837 & IER 1956 with latest amendemnts

© Connect the rod with copper Strip/Conductor/Wire with suitable clamp made from tinned copper and SS 304 Bolt

(d) Place Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm.

(d) Testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.

(e) Test certificates for confirming above standards from OEM is mandatory. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

17.2 mm thick and 3 Mtr. Long

Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu purity purity >95% thimble etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

8 SWG tinned copper Wire

Supply , Installation, Testing and Comissioning of Inverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/- 10% with low & high voltage cutoff and 50 hz , single phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

1.5 TR ISEER not less then 3.8

1.8 TR ISEER not less then 3.8

Supply, Fixing and testing of following capacity ISO certified company made wall mounted stabilizer having output voltage variation from 200 V to 250 V(+/-5%) with input voltage variation from 170 V to 260 V, time delay facility from 2 to 4 minute and high cutoff at 270 V with providing of 16 Amp /20 Amp Industrial plug top making connection etc complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Making hole in stone masonary/ RCC wall/ RCC slab with core cutter for accomodating refrigerant pipe/ drain pipe/ MS pipe/ cables etc of following dia

100 mm dia per running inch length

Supply & fixing MS powder coated stand suitable for 1.0/1.5/ 2.0 Tr outdoor type of Split AC. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Providing & Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping with fittings (IS:7834 & 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing, support with MS hanger on ceiling or recessed in wall with chasing & plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified 'Class O' in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

15.9 mm O.D., wall thinkness ≥ 0.8mm (insulation – 13 mm thick)

12.7 mm O.D., wall thinkness ≥ 0.8mm (insulation – 13 mm thick)

9.5 mm O.D., wall thinkness ≥ 0.8mm (insulation – 13 mm thick)

6.4 mm O.D., wall thinkness ≥ 0.8mm (insulation – 13 mm thick)

Providing & Fixing of din rail mounting contactor and accessories confirming to IEC 61095 with following description and configuration in existing distribution board / sheet including making connections, testing etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Modular contactor 63A - 4NO

Providing & Fixing of Recessed/surface mounting heavy duty Vertical TPN Distribution board with Metal end box with provision of incomer suitable for MCB / RCCB and SP / TP MCB as outgoing ,made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted with reversible door (for double door DB only ) complete with insulated 100 A rating copper bus bar, neutral bars with shrouds, earth bar , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Double door IK-09 & IP-43 with Metal end box

SITC of 3 /4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

4 pole MCCB With Thermal Magnetic release

up to 100 Amp , 25 kA, adjustable O/L & adjustable S/C setting,

Providing & Fixing of Vertical(BEE 5 star rated) / Horizontal( BEE 3 star rated) storage water heater with outer casing made of Engineering Plastic sheet (Upto 25 Ltr) / Metal rust proof Body (35 & 50 Ltr), Glass - line / Titanium Enamel coated Pressure Pump Compatible 8 bar pressure Inner tank, Glass Line Coated , mineral filled heating element, stem type, snap action adjustable thermostat , Dual indicating lamps Injected PUF insulation, Multi Function Valve etc. as required held in position with 2/4 no. 10/12 mm anchor Fastener, duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top with Portable Residual Current Device ( PRCD ) , including making inlet, outlet Flexible alloy connection, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .