SPECIAL REPAIRS TO SHED NO. A/8/9 AT PANAGARH MIL STN UNDER GE (P) PANAGARH

Amount

PART-I (B/R PORTION) Dismantling of or corrugated steel sheeting any gauge, thickness flat or curved including ridges,hips, valleys,etc as in roof covering including dismantling of wind tie complete all as directed.

S&F for pre-painted galvalum aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for pre-painted galvalum aluminium zinc coating GI based plain sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding , to wall, ridge ,fixed with self tapping screws complete all as specified and directed.

S&F plain, galvanized 1 mm thick, mild steel sheeting, in ridges,hips, vally gutter, drips and straight flashing, ( lengthand girth as fixed) with grade of zinc coating 275 completed all as specified and directed.

S&F for 2mm thick corrugated fiber glass reinforced translucent sheet with tow corrugated side lap fixed with two coach screw and washer in roof etc complete all as specified and as directed.

Re-fixing old CGI sheet obtain from Item No 1, 0.63mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as direted by Engr-in-Charge.

Dismantling of structural steel work door famed tuss,gates but excluding framed truss complete all as specified and as directed.

S&F MS Rolled section FE 410-W(gde E-250) as in main and cross beam ,hips,and jack rafter,purlins where connected to common rafters and running rails and guide for doors,fixed with angle cleats or other connecting plate complete all as specified and directed.

All as per item No -08 here in before but erection and fixing only complete all as specified and as directed. (Note :- Material obtained from dismantling refer item No-07 here-in-before shall be re-used)

S&F FE 410-W(gde E-250) as famed work as in door or gate of angle or other section with gusset plate, rail,baces,etc complete drilled for fixing of steel sheeting or other covering ,door etc to be prepared for hanging or sliding with and incl either hooks or hinges, steel hanging door fitting (exclusive of steel sheeting or other covering , running rails and guides) also fastening and fixing complete all as specified and as directed.

All as per item No -10 here in before but erection and fixing only complete all as specified and as directed (Note :- Material obtained from dismantling refer item No-07 here-in-before shall be re-used)

S&F bands ,staps,or stay for rain water ventilating pipe ,incl bolts if required, hooks for large gates, hook and pintle hinge,hand made sliding bolt ,clamp,wall tie,plate washer and similar articles confirming to FE 290,GDE E-165 complete all as specified and as directed.

M&L for prepretion of old painted steel surfaces of any description,over 10 cm in width or girth,not otherwise described and applying two coat of aluminum paint over priming with aluminium red oxide complete all as specified and as directed.

M&L for prepretion of new steel surfaces of any description,over 10 cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over priming with red lead complete all as specified and as directed.

M&L for prepretion of old painted steel surfaces of any description,n.exc 10 cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over priming with red lead complete all as specified and as directed.

M&L for prepretion of new steel surfaces of any description,n.exc 10 cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over priming with red lead complete all as specified and as directed.

Taking down and Refixing of shutter in other opening of any description exc 2.0 sqm each complete all as specified and as directed.

S&F steel window with side hung shutter incl projecting type hinge with steel handle and steel peg stay,complete with glazing bars,dovetailed or welded complete all as specified and as directed.

S&F 3.0 mm thick glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm in each pan complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below or above ground level ) incl speading and rremoving of rubbish complete all specified and as directed.

M&L for cement concrete type B2 1:2:4 using 40 mm graded stone aggregate as in foundation filling and mass concrete using metalic hardner @ 5 Kg/Sqm complete all as specified and as directed.

Supply only metalic floor hardner complete all as specified and as directed.

M&L for forming 20 mm thick expansion joint including smooth saw cutting the joints with diamond blades after 48 hrs of fresh poured concrete, clean the surface and fill the joints with pre formed bitumeneous filler and top 30 mm primed and sealed with sealing compound Gade B complete all as specified and as directed. (thickness of slab 150 mm)

M&L for forming construction dummy joint 65mm deep x 10 mm wide including smooth saw cutting the joints with diamond blades after 48 hrs of fresh poured concrete, clean the surface and filled with sealing compound Gade B complete all as specified and as directed.

M&L for forming construction joint 30mm deep x 10 mm wide including smooth saw cutting the joints with diamond blades after 48 hrs of fresh poured concrete, clean the surface and filled with sealing compound Gade B complete all as specified and as directed.

M&L cement concrete type B2 1:2:4 (40 mm graded stone aggegate) in suface channeles and drain complete all as specified and as directed.

M&L for form work to faces of walls,abutments,parapets and similar work vertical or batter complete all as specified and as directed.

M&L cement concrete nominal mix 1:1.5:3 type A1 20 mm graded aggregate complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement , incl forms,moulds,mitred/stopped etc complete all as specified and as directed.

S&Fixed in repair mild steel scews bolt (meachine made) with hexagonal or square at one end and screwed the others, or screwed both ends , each screwed ends to be fitted with washers and one hexagonal or square nut length of bolt exc 5cm but n exc 10 cm long complete all as specified and as directed.

Demolition of RCC of any description and in any position not otherwise specially povided complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (40 mm graded aggregate) cement concrete in foundations, filling and mass-concrete complete all as specified and as directed,

M&L for form work to sides of concrete foundations,footings,bases of column,raft and raft beam , side and soffits of foundation and plinth beam and similar work vertical or to batter complete all as specified and as directed.

M&L for RCC M 25 design mix for foundation,incl rafts, footings, foundation beams, plinth beams, bases of column etc and mass concete complete all as specified and as directed.

M&L for form work rough finished to sides and soffits of roof beam, girder, beam haunching, lintels,cantilevers,etc complete all as specified and as directed.

M&L for RCC M25 design mix for beams,cantileves, lintel over 1.5 m span complete all as specified and as directed.

M&L for form work to sides of pillars, posts,struts, columns and stanchions ough finished square or rectangular section complete all as specified and as directed.

M&L for RCC M 25 design mix for columns, pillars, posts and struts complete all as specified and as directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking,bending,spirally fo hooping fo hooping for columns,incl mild steel wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

All as per item no 39 but 5mm dia and over upto and including 10mm dia in stirrups,spaces and binders complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar including all work areas etc and stacking serviceable materials separate complete all as directed.

M&L for brickwork with Fly ash brick straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&l for 15 mm thick rendering in cm 1:4 on fair faces of brick work or concrate wall surfaces & finished even and smooth (without using extra cement) complete all as specified and as directed.

M&l for 15 mm thick rendering in cm 1:6 on fair faces of brick work or concrate wall surfaces & finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparing surfaces plastered or unplastered wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Removal of debrish/rubbish after demolition of masonry work from site at a distance 500 mtr to 1 km complete all as specified and as directed.

Taking down for frames with shutters, window boards etc. not exc 1.5 sqm each (Without taking off shutters from the frames) complete all as specified and as directed.

PART-II (E/M PORTION) Taking down carefully aluminum/copper point wiring (light/fan/socket/power) including fittings such as switches, socket ceiling roses, pendants, regulators etc and removing unserviceable materials from site and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as specified and as directed.

M&L point wiring with 1.5Sqmm (Nominal area) PVC insulated and unsheathed single core cable 1100 volts grade with standard coper conductor in and including PVC surface conduit including accessories along with continuous earth wire 1.0 Sqmm PVC insulated, unsheathed standard copper conductor cable and connected to common earth dolly with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0mm thick hylam sheet cover fixed with brass screw complete with all accessories for on light point/ Fan point controlled by one, 1-Way switch.

All as per Item No 1 mentioned here-in- above but one 5 pin 5 Amps socket out let on the same board with other switches with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and as directed.

All as per item No 1 mentioned here-in- above but one 5 pin 5 Amps socket out let on independent board with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and as directed.

All as per item No 1 mentioned here-in- before but 6 pin15 Amps socket outlet on independent board with 4 sq mm PVC insulated and sheathed copper conductor with 1.5 sq mm PVC insulated copper conductor single core for continuous earthing complete all as specified and as directed.

M & L for Switch piano flush type single pole one way 6 Amp complete all as specified and as directed.

M & L for Socket outlet 2 in 1,3 pin , 6 Amps flush type complete all as specified and as directed.

M & L for Switch 16 Amps flush type universal complete all as specified and as directed.

M & L for socket outlet 5 in 1, 3 pin, 6 Amp and 16 Amps flush type universal complete all as specified and as directed.

M & L for ceiling rose, PVC/Polycarbonate three terminals completeall as specified and as directed.

S & F Metal exhaut fan 300 mm, 230, AC, 50 Hz comlete with fixing arrangement and connection. Make: standard SPS

S & F 01x 18W LED fittings decorative Regal batten for LED tube with tube 18 watt lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and as directed. Make : Havells Cat No. LHEXBTP7UN1W018/Bajaj/CG/Century LED Ltd(Magik)/C&S

S & F of fan Wall mounted 400 mm, 230, AC, 50 Hz with fixing arrangement and connection, complete all as specified and as directed. Make: standard or Equivalent

Supply and fix submain wiring with 2 x 2.5 sqmm FR PVC insulated copper cable 1100 volts grade multistranded, unsheathed conductor drawn in rigid steel conduit including 1.5 sqmm multi stranded FR PVC insulated copper wire for earth continuity conductor connected to common earth dolly all as specified and directed for connections to control gear of hanger light complete all as specified and as directed. NOTE:- (i) Suitable ladder/staging for doing work at a height of 6-8 mtr, inside the hanger, to be provided by the contractor at his own arrangement and cost. (ii) Rigid steel conduit with all acessories will be measured and paid separately.

Supply and fix rigid steel conduit, outer dia 25mm, with all acessories i.e, Tees, Elbows, Junction Boxes, etc., welded stove enamelled black complete all as speciified and as directed.

S&F 140 watt LED Highbay Luminarie with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion with IP-66 of 140 W LED fitting, including hook for hanging of light complete all as specified and as directed. Make:C.G(Cat No- LHB11-140-CDL/60)I or equivalent in Piliphs/Bajaj/CG/Century LED ltd/C&S

M & L sheet metal enclosure for DBs TPN 4 way double door type with 200amps IP 43 rated busbar including necessary connection complete all as specified and as directed.

M & L for MCB single pole 6 to 32 Amps 240 V 50 Hz 10kA 'C' series complete all as specified and as directed.

M & L for MCB TPN 63 Amps 240 V 50 Hz 10kA "C" series complete all as specified and as directed.

M&L earthing complete with galvanised earthy plate electrode 600 x 600 x 6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150 mm on all sides with and including necessary exacavation earth work returning, filling in and removal of surplus soil upto 50 mtr including GI wire 4 mm dia bolted and revetted to earth plate at one end in and connected to continuous GI earth wire encased in and including 15 mm GI light grade pipe with all fittings from top edge of earth plate complete as specified and as shown in electrical plate no 5.

Supply and fixed in repair street light bracket made out of GI pipe light grade 25 mm dia 1.5 mtr long bent to required shape as directed and fixed to pole complete with painting and including two set of 20x3mm FI clamps and fixing arrangement such as nuts, bolts and washers complete in all respect or as specified and as directed.

Supply and fixed building security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size, complete all as specified and as directed.Make: HAVELLS Cat no. ENDURKPEEARLSL25WLED757SASYTOPC/BAJAJ/C.G/C&S/CENTURY LED LTD

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and as directed . Note :- Punned thickness 18 cm shall only be considered for payment

Material and labour for laying well fly ash brick size having compressive strength 75Kg/sqcm, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified and as directed.

Supply, laying and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 25 Sqmm 4 core complete all as specified and as directed by Engr-in Charge.

Schedule of Credit

Anmol Yash S.D. Construction Pvt. Ltd.

FRIENDS CONSTRUCTION

Hooghly Construction Co.

UNIVERSAL TRADING

M/S AJIT KUMAR KONAR AND SUBHAS CHANDRA KONAR

Palak Infracon