Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹51.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹56.3 L+₹3.5 L (6.65%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹58.8 L+₹6.0 L (11.3%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹59.3 L+₹6.5 L (12.2%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹60.5 L+₹7.7 L (14.5%)Rejected-Finance 122 SAMHARIYA ASOPUR TANDA AMBEDKAR NAGAR UTTAR PRADESH 224190 | AMBEDKAR NAGAR | UTTAR PRADESH | 224190 | L5 | Rejected-Finance L5 |
Tender Value
₹59 L
EMD Value
₹1.2 L
Closing Date
20 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JAIPUR
Military Engineer Services, HQ Commander Works Engineer, Kalyan Marg, Banipark, Jaipur-06
COMPREHENSIVE MAINT OF ACCN IN ZONE -I AREA UNDER AGE B/R-I AND E/M AREA OF GE JAIPUR
2023_MES_580839_1
CWE/JPR/82221/E8
Open Tender
Civil Works
Item Rate
270 days
JAIPUR
Class D cat a(I)
7 documents required · 7 mandatory
₹1,000
GE JAIPUR
₹1.2 L
Yes
10 Aug 2023
14 Feb 2023
22 Mar 2023
14 Feb 2023
20 Mar 2023
7 Mar 2023
14 Feb 2023 - 6 Mar 2023
Amount
Taking down cement plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish outside MD land etc complete all as specified & directed.
Dismantling of cement concrete tiles, glazed tiles, terrazo tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish outside MD land etc complete all as specified & directed.
Demolition of cement concrete (un-reinforced) in any position and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed incl removing the rubbish outside MD land etc complete all as specified & directed.
Demolition of reinforced cement concrete roofs, floors (Other than ground floors), beams, staircases, landing, chajjas, slab & similar suspended work complete all as specified and directed incl removal all rubbish material outside of MD Land etc complete all as specified & directed.
M&L rendering 15 mm thick in CM 1:4 on brick masonry surfaces on fair faces of brick masonry finished even and smooth without using extra cement etc complete all as specified & directed.
M&L rendering 15 mm thick in two layer, Ist layer 10 mm thick in CM 1:6 over 5 mm Thick in CM 1:4 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even etc complete all as specified and directed.
M&L rendering 5 mm thick in CM 1:3 including as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed .
M&L rendering 10 mm thick in CM 1:3 n exc 3.00 sqm each patch in ceiling patches in ceilling finished even and smooth without using extra cement complete all as specified and directed
M&L for Roughning of old concrete floor by picking, sweeping and washing down with water to remove dust etc. and brushing neat cement slurry with 3.00 kg of cement per sqm complete all as directed.
M&L Non- skid joint free coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed with neat cement slurry and pointed with coloured cement to match the shade of tile laid over & incl 15 mm screed thick in CM 1:6 complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floors etc set and jointed with neat cement slurry and pointed with coloured cement to match the shade of tile laid over & incl 15 mm thick screed in CM 1:6 complete all as specified and directed.
M&L for non skid joint free coloured ceramic matching tiles 7 to 8mm thick (square / rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in vertical serface, skirting etc with coloured cement to match with coloured tiles fixed over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for coloured Glazed ceramic tiles (300x450 x 7mm thick), in wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and directed .
M&L for 15-16mm thick Granite work (table rubbed & polished) (Rajasthan black) in window-cills etc laid over & including 15 mm thick screed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite complete all as specified and directed.
M&L for 18-20 mm thick kesaria Green marble (table rubbed & polished) in cooking plat forms & edges in and like in cement mortar 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.
M&L for 25mm marble slab as in vertical partitions, below kitchen cooking plat form and raised platform of kitchen, under kitchen platform complete all as specified and directed.
M & L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors complete all as specified and directed.
M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles/kota stone etc complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick of size 550 x 550 mm in floor over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing complete all as directed
M & L for Machine cut kota stone slab flooring 20-25mm thick in thread to steps in single piece laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete
All as per item No 21 above but as in risers to steps, skirting over & incl rendering 10 mm thick in CM 1:4 complete all as directed
M&L for rounding to edges of stone slab such as in steps (Kota stone) one edge etc complete all as specified and directed.
M&L for rounding to edges of stone slab (granite) two edges such as in cooking platform etc complete all as specified and directed.
S & F 18 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent one side white laminate and other side decorative as in kitchen cabinets fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick (of REHAU or equivalent) of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as directed
S & F 8 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent as approved by GE, one side white laminated and other side un-decorative as in back of kitchen cabinets complete all as specified and directed.
S & F kitchen plain baskets of stainless steel size 17" x20" x 4" of grade SS-304complete all as specified & directed. (Make : Godrej, Hindware, Lifetime or equivalent as approved by GE)
S & F kitchen prerforated cutlery baskets of stainless steel size 17" x20" x 4" of grade SS-304 complete all as specified & directed. (Make : Godrej, Hindware, Lifetime or equivalent as approved by GE)
S & F kitchen cup & saucer baskets of stainless steel size 17" x20" x 4" of grade SS-304complete all as specified & directed. (Make : Godrej, Hindware, Lifetime or equivalent as approved by GE)
S & F kitchen plate baskets of stainless steel size 17" x20" x 6" of grade SS-304 complete all as specified & directed. (Make : Godrej, Hindware, Lifetime or equivalent as approved by GE)
S & F kitchen grain baskets of stainless steel size 17" x20" x10" of grade SS-304 complete all as specified & directed. (Make : Godrej, Hindware, Lifetime or equivalent as approved by GE)
S & F stainless steel basket guide channels (telescopic ball bearig drawer channel) suitable for running basket as mentioned in item 27-31 above of grade SS-304 of size 20" complete all as specified & directed.
S & F auto close hinges, stainless steel of grade SS-304, bright finish fixed complete all as specified (Make : Hettich, Godrej or equivalent as approved by GE)
S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed
S & F kitchen sinks made of stainless steel sheet 1 mm thick of Grade SS-304 incl plug, washer, brass sink coupling, waste pipe, bowl size 410mmx330mm x160mm and overall size 495mm x 420mm fixed in kitchen complete all as specified and directed.
S&F in repair 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
S&F in repair 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
Taking down old and refixing after cleaning old 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
Taking down old and refixing after cleaning old 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
S&F in repair bib taps 15mm bore long body cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified directed.
S&F in repair bib taps 15mm bore short body cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.
S&F in repair bib taps 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union for kitchen complete all as specified and directed.
S&F in repair pillar taps 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.
S&F in repair brass CP towel rail 20mm dia, D type 60 cm long complete all as specified and directed.
S&F double Soap dish, CP brass 'R' type fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repair Brass chromium plated shower rose 125mm x 125 mm size with or without swivel joints, any size, including fixint to steel pipe or union complete all as specified and directed.
S & F in repair 15 mm dia Angle valve, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed.
S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair 20mm bore gate valve gun metal screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed.
S & F wall mixer CP hot & cold, 15mm bore with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.
S & F 250 mm Corner Glass shelf of minimum 6mm thick glass with brass brackets and chromium plated supproting frame complete all as specified and directed.
S&F in repairs vitrous china squatting pan of size 580 x 440 mm (Orrisa pattern), white with integral foot rest (excluding flushing cistern & flush pipe) including antisyphonage pipe complete all as specified and directed.
S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .
S&F in repairs vitreous china wash hand basin white flat back size 550 x400 mm excluding taps, waste, chain & plug and porcelene stopper but including brackets /fastners, cutting for and pinning in ends of brackets but exclussive of fixing of supply and waste pipe complete all as specified & directed
S& F 32 mm bore PVC waste pipe 75 mm long for wash basin etc complete all as specified & directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material outside of MD Land complete all as specified and directed.
M & L brick work using Subclass B bricks in exc. 6 m mean radius on plan built in cement mortar 1:6 complete all as specified and directed.
M & L brick work in half brick thick wall using Subclass B bricks built in cement mortar 1:6 complete all as specified and directed.
M&L for squared rubble, regular coursed stone masonary well bonded , bedded and solidly hearted built in CM 1:6 complete all as specified and directed.
S&F in repair 110 mm UPVC ventilation and rain water pipes single socketed (type A conforming to IS-13592) in any length with rubber ring joints laid in trenches or floors complete all as specified & directed.
S&F in repair 110 mm UPVC ventilation and rain water pipes single socketed (type A conforming to IS-13592) in any length with rubber ring joints fixed to wallls complete all as specified & directed.
S&F in repair 75mm UPVC ventilation and rain water pipes single socketed (type B conforming to IS-13592) in any length with rubber ring joints laid in trenches or floors complete all as specified & directed.
S&F in repair 75mm UPVC ventilation and rain water pipes single socketed (type B conforming to IS-13592) in any length with rubber ring joints fixed to wallls complete all as specified & directed.
S&F 110 mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as specified & directed.
S&F 110 mm dia PVC (SWR) bends any radius with access door complete all as specified & directed.
S&F 75mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as specified & directed.
S&F 75mm dia PVC (SWR) bends any radius complete all as specified & directed.
S&F 75mm dia PVC (SWR) branch piece, double (double y) complete all as specified & directed.
S&F 110 mm PVC (SWR) vent cowl complete all as specified & directed.
S&F PVC (SWR) 75 mm dia of outlet nahani trap/floor trap with grating including jointing with solvent cement complete all as specified & directed.
S& F Salt glazed stoneware gully traps of size 150x150 , square or round mouthed, type‘P’
S & F MS CP Grating doom 100 mm dia with waste hole complete all as specified & directed.
S & F MS CP Grating doom 100 mm dia complete all as specified & directed.
S&F in repair 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), two layered, hoisted and fixed in position complete all as specified in SSR Part I complete all as specified & directed.
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and Refixing in same position including Resecuring or easing & adjusting complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed.
S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified.
S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified.
S & F for Solid wood grain printed PVC sheet door frame of size 50mm x 95mm made by joining 3nos. Heat bent PVC Sheet `C' Channel of 5mm thickness of sizes 35mm x 30mm x 25mm & 40mm x 35mm x40mm & 25mm x 30mm x 35mm using solvent cement. The two side `C' Channel shall be reinforced with M.S. tube of size 19mm x 19mm. All the three `C' channel Shall be fixed to flat base of 5mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and joined by inserting 4nos. 150mm long brackets of 15x15mm M.S. Square tube inside the 19mm x 19mm square tubes & remain each of then with four screws as indicated in the drawing complete all as specified & directed.
S&F for 35 mm thick Factory made solid EPS core PVC Moulded Door shutter, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design, consisting of frame made out of MS tube 20 mm x 40 mm. The core panel shall consist of 25 mm thick high density EPS routed with design, sandwitched in between front side moulded prelam 2 mm thick Moulded PVC sheet on one face and 2 mm PVC sheet on other side. The shutter on all edges to be sealed with lipping of 10 mm (5mm x 2) thick x 25 mm wide PVC sheet on other side & 60 mm wide PVC sheet for lock lock rail side . the lipping shall be bonded to the 2 mm moulded / plain PVC sheet with solvant cement asas specified and shown on serial pages No. 142, 143, 144 , 145 & 146 of SSR 2010 (Part-II) and Particular specification & as directed. Note :- (i) Doors shall be of make :- Rajshri Plastiwood / Sintex /Rotomould / Rotomatic or equivalent as approved by GE. (ii) The PVC doors shall be fixed as per manufacturer's instructions and as directed.
S & F 35mm thick flush shutters solid core construction with block board and plywood face panels, fixed with approved adhessive incl lipping all round the edges of door as per manufacturers instructions
M&L for decorative laminate sunmica type 1, 0.9 mm thick colour and pattern as approved fixed as in door shutters etc complete all as directed.
S & F 35mm thick second class hardwood factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash bars any numbers , fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- Glass/ wire gauge shall be measured and paid for separately
S&F mortice lock for main door of Godrej locking solution and system ELC-06 -6 Lever door handle with loc set steel complete all as specified & directed.
S & F 35mm thick factory made partly glazed/ gauzed and partly panelled skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- Glass/ wire gauge shall be measured and paid for separately
Supply only Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed to wodden door shutters complete all as specified & directed.
S &F Framed work such as door frame, grills, gratings, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks with Angle, MS sheet Flat iron & similar work conforming to Fe 290 GDE -E-165 (Ladders, door frames and cooler stand etc) complete all as specified & directed.
S & F MS butt hinges 100mm size cold rolled medium weight and fixed as directed and specified.
S & F 250 mm long SS sliding door bolt with hasp, staple (bolt type) not less than 12 mm dia with & minimum of 6 bolts & nuts , 4 on bolt plate & 2 on staple plate complete all as specified & directed.
S & F stainless handles cast moulded type 150mm size fixed with screws complete all as specified & directed.
S & F stainless barrel tower bolts not less than 12 mm dia of extruded section, 200mm long complete all as specified & directed.
S & F 75 mm long door stopper of stainless steel body with two number rubber shoes complete all as specified & directed.
S & F Aluminium extruted type handles cast moulded type 125mm size fixed with screws complete all as specified & directed.
S & F Aluminium extruted type tower bolts 125mm size fixed with screws complete all as specified & directed.
S & F Aluminium extruted type sliding bolts 150mm size fixed with screws complete all as specified & directed.
S & F MS rat tail rod pattern (Helical door) spring150mm long including roller and roller plate complete fixed to angle iron chowkats complete all as specified & directed.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and Refixing in same position including Resecuring or easing & adjusting complete all as specified and directed by Engineer-in-Charge.
S & F in repair pressed steel factory made cupboard shutter with frame of 1.25 mm thick and shutter 1 mm thick PBI sheet with 6 nos 3.15 mm thick and 100 mm long steel hinges godrej patern locking arrangement incl 12 mm dia verticak rod incl spray painting in factory in wood finish pattern or as directed.
S&F in repair 25 mm dia SS drapery rod grade 304 medium weight all as specified and as directed. Make Jindal or equivalent as approved by GE
S&F SS -304 grade brackets/ end brackets for holding drapery rod all as specified and as directed.
S&F SS Finials suitable for 25mm dia SS 304 grade drapery rod as approved
M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.
M&L preparation old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.
M&L for preparation of old painted wooden or wood based surfaces of any description n.exc 10 cm in width or girth when unconnected with other painting or when painted in a diferent tint and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for WPT in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement including Preparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 3 mm thick and weighing not less than 3.0 kg/ sqm of make super thermolay manufactured by STP ltd or Hyper Plas (Polyster) manufactured by M/S IWL Ltd or 'Shatiplas' (Polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyster matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC) at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch , with a over lap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface and filling lime concrete 1:5:10 type E2, 250 mm thick with brick bats complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately
M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means over a coat of primer & over one coat of 1mm thick wall care putty to make smooth the undulated surfaces complete all as specified and directed.
M&L for complete removal of existing treatment on walls, including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means over a coat of primer over one coat of 1mm thick wall care putty to make smooth the undulated surfaces complete all as specified and directed..
M&L for Preparation of new plastered surfaces of walls and applying two coats of exterior emulsion paint over a coat of primer with hand roller complete all as specified.
M&L for complete removal of exiting surface & thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smmoth surfaces, including all necessary arrangement for execution of work and applying two coats of exterior emulsion paint using hand roller of over one coat of water based white pigmented akali resistant priming paint for external wall, complete all as specified and as directed by Engineer-in-Charge.
M & L for preparation of old plastered surfaces of walls & applying two coats of white wash using brush complete as specified & directed
M & L for preparation of newly plastered surfaces & applying three coats of white wash by using brush on ceilings complete as spd & directed
M & L for Complete removal of existing treatment of old plastered surfaces of ceilling and Washing, rubbing down and stopping of painted surfaces & applying two coats of white wash by using brush complete all as spd & directed
M&L for Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate,on lintels up to 1.5m clear span, bed plates,coping, kerbs water trough & the like including weathering, slightly rounded or chamfered angles & throating, as directed
Taking down existing water proofing roof treatment of all description complete all as specified and directed.
Demolition of PCC in roof covering. Kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing tratment of any type all as directed by Engineer - in charge.
M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0,( 1.2.4) using 12.5 mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 1% weight of cement complete all as specified and directed (WPC shall be measured & paid separately)
Supply only liquid water proofing compund
M&L for rendering 10mm thick in cement mortar (1:3) on concrete surfaces to receive water proofing treatment finished even and fair complete all as specified.
The surface shall be painted with one coat of polymeric primer @ 0.40 kg per sqm conforming to IS: 3384, APP membrane of 3 mm thick minimum weight not less 150 gms and Side over lap shall be 75 mm and ends shall be 100 mm and all over lap and joints insert upto thr ht 150 cm vertical surface imbeded in wall and finifhing in CM 1:3 , embeding membrane into spout pipe , roof down ward facia and shall sealed by torch application with bitumen 30/40 grade, coved filled in PCC (1:2:4) type B-0 of radious 75 mm at roof junction, parapet wall and other vertical surface complete all as specified, Applicatiion of polymeric memberance shall be torch application all as per manufacturer instructions.
M&L preparation of APP based polymeric surface and applying two coat of aluminium paint all as specified & as directed.
M & L for PCC tiles of size 250mm x 250mm x 22 mm over and including 15 mm thick screed bed CM (1:6) with grey cement & no pigment set jointed and pouinted in neat cement slurry in as in roof cut & polished complete all as specified & directed.
M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
M & L for PCC (1:3:6) type -1 using 20 mm graded stone aggregate as in kerb stone complete all as specified & directed.
S & F fixed in repair Plate rack of size 750mm x600mm x250mm fabricated out of 0.60mm thick stainless steel sheet fixed complete all as specified and directed.
Taking down & Chipping the RCC surface upto 30mm thick avg thickness and cleaning the rusted reinforcement and exposed surface by wire brush, mechanical device or any other established method and applying the rust removing solution of approved make and quality with cotton swab to reinforcement and allowing to dry the same for 24 hrs complete all as directed.
M & L for 30mm thick polymer mortar to load carrying RCC members in two layers in proportion of 1:5:15 by weight of polymer of approved make and quality, cement and quartz sand with required WC ratio for desired consistency and applying and finishing by floating, curing after initial setting time etc. as per manufacturer specification etc. complete all as directed and specified.
M&L for MS TMT bars 6 mm to 8 mm dia cut to length bent to shape reqd incl cranking, bending spirally for hooping for cols, hooking ends and binding with steel MS wire (annealed) not less than 0.9 mm dia complete all as directed and specified.
All as per item No above 132 but 10 mm dia & over complete all as directed and specified.
M&L for formwork to chullah hoods, chajjas through and similar items including edge finish flat surface complete all as directed.
M&L for formwork to side of pillar post , struts, piers, columns and stanchions etc finish with flat surface complete all as directed.
M&L for formwork to soffits of suspended slab such as roof slabs, floor slabs n.exc.200 mm thick complete all as directed and specified.
M&L for RCC M-25 (20 mm graded stone aggregate ) as in Chhaja, roof projection etc complete all as directed.
M&L for RCC M-25 (20 mm graded stone aggregate ) as in slabs supported on walls beams & coloumns in floors , roofs, balconies etc. complete all as directed and specified.
Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness including nainital or similar pattern roof /wall covering complete all as directed and specified.
Dismantling wrought iron or mild steel work of any description nototherwise provided for complete all as directed and specified.
M & L Steel work in tabular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to grade IS 1161 1979 grade st 240 complete all as specified & directed.
S&F pre painted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers complete all as specified & directed.
Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar complete all as specified & directed.
M&L precast PCC blocks or slabs 150 mm thick (1:3:6) mix type C-1 using 20 mm graded aggregated with plain ot interlocking joints as directed complete in walls setting in CM (1:6) complete all as specified & directed.
M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in base complete all as specified & directed.
M&L 60 mm thick PCC intrelocking tiles precast concrete rubber moulded with colour pigment precast concrete conforming to IS 15658-2006 with M-35 Grade any shape and size laid over and including 25mm thick sand cusion as directed by Engineer In-charge
S&F factory made UPVC top hung double shutter using standard sections as per manufacturers instructions incl SS wire guage of 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and glazed shutter with 5 mm th toughned glasss incl hinges stays & hardware etc complete9.Design of ventilator shall be - bottom half fixed toughened glass 5 mm thick, upper half with two shutters ie gauged and glazed.) filling the gap between wall & UPVC frame with silicon sealant complete all as specified & directed . (Note: The unit rate quoted by contractor excluded cost of glass and includes all other connected accessories & silicon sealant for fill the gap between wall and window, net opening will be measured for payment purpose, Silicon sealant will be paid separately)
S&F 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane complete all as specified & directed.
S & F repair of Four Kitchen Duct for Rain Water Pipe, Domestic Water Supply Pipes and Tank supply Riser pipes fixing done with Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt R/M System - 1. Rain Water Pipe 4" PVC, 2. Waste Water Pipe 2 1/2" PVC, 3. Water Supply Down take lines 1/2" GI - 2 nos. and 4. Riser pipelines 3/4" GI - 2 nos. running Vertical Fixed line with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket Type A2 (Wall Distance 3") of Low Carbon Hot Roll Gauge Corrected (HRGC) steel with ribs and notch are Hot Dip + Zn Al flake coated with flange bolt and flange nut are Zn Al Flake coated. 2. Slotted "C" Channel B3 Type to be used of size 24" of Low Carbon Continuous Slotted C Channel with ribs made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel are Hot Dip + Zn Al flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with flange nut set having natural serration - Zn Al flake coated. Material Qty.: 1. Profile Bracket of A2 Type (Wall distance 3") - 2 Nos. 2. Slotted C Channel of B3 Type Size 24" - 1 No.; 3. U Bolt R/M for 4" PVC Pipe Dia. - 1 No.; 2 1/2" PVC Pipe Dia. - 1 No.; 3/4" GI pipe Dia. - 2 nos.; 1/2" GI pipe Dia. - 2 nos and 4. Justi Khilla 2 1/2" - 4 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing. Refer CE Jaipur Zone Technical Drawing no. TD/2022/01. Make : Shaivi or equivalent as approved by GE
S & F repair of Toilet Duct for Soil Water Down take pipe fixing done with Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt R/M System from Terrace to 1st Floor running Vertical Fixed line with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket Type A2 (Wall Distance 3") of Low Carbon Hot Roll Gauge Corrected (HRGC) steel with ribs and notch are Hot Dip + Zn Al flake coated with flange bolt and flange nut are Zn Al Flake coated. 2. Slotted "C" Channel B3 Type to be used of size 10 " of Low Carbon Continuous Slotted C Channel with ribs made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel are Hot Dip + Zn Al flake coated with material thickness of 3mm. 3. U bolt R/M are made of Low Carbon Mild Steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with flange nut set having natural serration - Zn Al flake coated. Material Qty.: 1. Profile Bracket of A2 Type (Wall distance 3") - 2 Nos. 2. Slotted C Channel of B3 Type Size 10" - 1 nos.; 3. U Bolt R/M for 4" PVC Pipe Dia. - 1 No. (Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing. Refer CE Jaipur Zone Technical Drawing no. TD/2022/01)
S & F r of Water Supply Riser Pipelines for Overhead Tank Supply pipes fixing done with Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt System - Water Supply Down take pipes 3/4" GI running Vertical Fixed line with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket Type A2 (Wall Distance 3") of Low Carbon Hot Roll Gauge Corrected (HRGC) Mild Steel with ribs and notch are Hot Dip + Zn Al flake coated with flange bolt and flange nut are Zn Al Flake coated. 2. Slotted "C" Channel B3 Type to be used of size 15" of Low Carbon Continuous Slotted C Channel with ribs made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel are Hot Dip + Zn Al flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with flange nut set having natural serration - Zn Al flake coated Material Qty.: 1. Profile Bracket of A2 Type (Wall distance 3") - 2 Nos. 2. Slotted C Channel of B3 Type Size 12" - 1 No.; 3. U Bolt R/M for 3/4" GI pipe Dia. - 2 nos and 4. Justi Khilla 2 1/2" - 4 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing. Refer CE Jaipur Zone Technical Drawing no. TD/2022/01. Make : Shaivi or equivalent as approved by GE
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.
Taking down old aluminium/copper conductor sub main wiring of any size complete all as directed.
M&L for Point wiring complete as specified with 1100 volt grade 1.5sqmm (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including rigid non-metallic PVC concealed conduit of suitable size but not less than 20mm dia, with all fittings, concealed in wall/roof /floor including unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as required for the following :- One light/fan/ Exhaust fan point controlled by one switch 6 Amps 1 way. (Note - Cost of cutting of chases in stone masonry and making good disturbed surfaces for concealing the conduit shall deemed to be included in quoted rate of point wiring) complete all as specified and directed.
All as per Item 156 above but One Bell point controlled by one switch 6 Amps 1 way.
All as per Item 156 above but One light point controlled by two switch 6 Amps 2 way.
All as per Item 156 above but One 3 pin 5 Amp socket out let on independent board.
All as per Item 156 above but One 3 pin 5 Amp socket out let on same board.
All as per item No. 156 above but point wiring with 4 sqmm PVC insulated multistranded copper conductor suitable for one 3 pin 16 Amps socket outlet on independent board.
S & F angle holder, insulated polycarbonate body with back plate complete all as specified & directed.
S & F switch piano flush button single pole 6 Amp one way complete all as specified & directed.
S & F switch piano flush button single pole 16 Amp one way complete all as specified & directed.
S & F switch flush type single pole 6 Amp two way complete all as specified & directed.
S & F bell push 6 Amp one way 240 V AC 1 module complete all as specified & directed.
S & F Socket Socket, 6A - 2/3 pin combined 2 module,multi socket for all pins 230 V AC complete all as specified & directed.
S & F Socket 6A/16A - 2/3 pin combined 2 module multi socket for all pins 230 V AC complete all as specified & directed.
S & F hum free fan regulator electronic step type 100 W, (socket type) complete all as specified.
S&F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete all as specified & directed.
S & F in repair Ceiling fan 1200mm sweep, 5 Star rated with ISI working on single phase, 230volt, 50Hz AC supply complete with down rod and canopy including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of size 0.75 sqmm complete as as directed.
S&F in repair MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts,8 ways complete all as specified and directed
S & F Sub main wiring with PVC insulated FRLS multistraded copper conductor cable 6 sqmm 1100 V grade with stranded copper conductor (for ups) on and incl rigid PVC conduit concealed in wall / roof/ceiling (ISI marked) incl all specials like joint elbow, Tee, junction, bend etc and provision of PVC insulated copper conductor 6.0 sqmm for earth continuity all as directed. Note : (i) Two run single core PVC insulated multistraded copper conductor (FRLS) cable conduit and one length of earth cable shall be measured and paid for one length (ii) cost of Cutting through wall & concealed conduit etc shall deemed included in quoted rate.
S&F MCBs of 'C' series single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete.
S&F MCBs of 'C' series single pole 10 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed
S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 125 lumen per watt and total power consumption not more than 16 watt including driver. It has a rated system life time of 50000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed
S&F LED fixture 10 watt having lumen output 100 lumens per watt including connection complete all as specified and directed
S&F LED bulk head fitting 9 watt IP 66 & IK 09 with pressure die cast aluminium housing & polycarbonate diffuser duly pre wired connection with 0.75 Sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified and directed
Supply, installation, testing and commissioning of LT panel board fabricated out of 2mm thick stainless steel (SS 316) with copper bus bar 4 pole equal of capacity in colour code R, Y & B, 200 Amps 415 Volts indoor type wall mounted of size not less than 750mmx650mmx250mm, installed on procelain insulators with bus bar chamber. The panel shall be dust and vermin proof, protection class IP 42 class, front opening & compartmental type with approach for cable entry and for easy maintenance duly internally wired with FRLS, PVC insualated stranded copper conductor cable of 1.0 Sqmm including LED indicator for R, Y & B and comprising of the following :- Incoming : One number MCCB 125 Amps 4 pole 16 KA 415 Volts, 70-100%, 50 Hz Make Legrand /Hager/Schneider. Outgoing : MCB DP 40 Amps 'C' series 10 KA AC 240 volts-08 Nos.
M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall build on cement mortar 1:4 and 2 coats of white/colour washing to match the surface complete all as specified and directed
S & F in repair Exhaust fan 300mm sweep 1440 RPM ,Heavy Duty Exhaust Fans metal body type with ISI working on single phase, 230volt,50Hz AC supply complete with Lovers and fixing acessories complete with insulated 3 core copper cable of size 0.75 sq.mm complete as as directed.
S&F in repair electric water heater 25 litre capacity BEE star rating 5 in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 25° C to 75° C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insullation complete.
S&F door bell AC 240 volts, single pole complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.
Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in soft / loose soil complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in hard and dense soil complete all as directed.
Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point.
M&L for sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as directed. (Punned thickness of 18cm will be measured for payment puspose)
M&L for Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as directed.
Dismantling and taking out UG cable any size unserviceable items fixed in any position and removal from site, all as directed.
S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminum conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 25 Sqmm nominal cross section 4 core laid in trenches,fixed to pole or passing through pipes including all necessary clamps,nuts, bolts washers complete all as specified and directed.
M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.
S&F in repair 10 watt LED T -lamp B-22 base (warm white/golden yellow) 1000 lumens, height 8.0 cm width 20.5. Make : Make : Philips Part No 9290018611 or equivalent in Panasonic/CG/Bajaj as approved
Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket suitable for IP-44 degree for protection 20 Amps rating mcb complete.
Taking down carefully existing exchaust fan 230/300 mm including all fittings and after B/R work refixing the same including fixing assesares complete.
Taking down fan /Exhaust fan, cealing cable end, dismantling blades and removing fan and blades to store and refixing after the reair and painting same complete
M&L for Painting of ceiling fans / Exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.
M&L for Rewinding the motor of ceiling fan 1200/1400 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.
M&L for Rewinding the motor of fresh air/exhaust fan 230/300 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.
M&L for Renewal of ball bearing of ceiling / exhaust fan of any size and make as required with alignment of shaft and testing complete.
M&L for Renewal of AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete.
Taking down carefully existing water heater 25 litre capacity including all fittings and after tile/ plumbing work refixing the same including fixing assesares and hot and cold pipe 15 mm dia bore 450 mm long complete.
M&L for Opening up geyser of capacity 25/50 litre, checking defect, taking out u/s parts and re-assembling after carrying out repair / renewal work including nuts / bolts / washers / gaskets / fusible plug etc wherever required and minor items not included separately in schedule. (Note - U/s parts shall be measured separately under relevant item of schedule as supply only).
Supply only geyser apparatus plate (any make, any type) copper alloy chromium plated suitable for geysers 25/50 litre capacity including rubber gasket, nuts / bolts etc complete.
Supply only heating element 2.0 KW, 230 volts, ISI marked suitable for 25/ 50 litre capacity geysers of any type as required.
Repair of apparatus plate of geysers 25/50 litre capacity by brazing not exceeding 5 mm thick complete.
Supply only thermostat ISI marked suitable for 25/50 litres geysers as required.
Supply only stainless steel inner tank suitable for 25 litre capacity geysers housing complete.
Supply only dis cut out switch suitable for 25 litre capacity geysers (make of geyser MARC) complete.
Supply only capillary thermostat set suitable for 25 litre capacity geysers ( make of geyser MARC) complete.
S&F in repairbrass chromium plated, flexible pipe connection 15 mm bore 450 mm long heavy duty suitable for hot water supply with two numbers brass chromium plated nuts at end complete.
M&L for painting of geyser 25/50 litre with two coats of synthetic enamelled white paint after removing old paint and preparation of surface and writing MES No (Letters height 10 cm) complete.
S&F in repair PVC insulated over all PVC sheathed three core copper cable of size 2.5 sqmm complete all as specified and directed.
Less Schedule of Credit
MSR INFRATECH
M/S ROHIT CONSTRUCTION
UNIVERSAL INFRAPROJECT PVT LTD
Shiv Construction Company
JAGDAMBA CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .