Execution of work under Minor Civil and Electric Work (Conservation of Ancient Monument) To Construction of Broken Boundary wall and Installation of M.S. grill Fencing at Magnificent Temple at Barha Kotra Karvi.

Amount

Execution of work

Provision for dismantling of old damage cracked out of plumb CR Stone masonry in lime or cement mortar very carefully without damage of adjacent structure. Including stacking of useful material for re use in masonry work and disposal of refused out of monument by mechanical transport. Including all the labour and T&P. Required proper completion of work at the site.

Provision for earth work in rough excavation, banking. Excavated earth in layers are not exceeding 20 cm. in depth, banking clods watering, rolling each layer. Including labour and material charges.

Providing and laying cement concrete in foundation and floor base with mortar of ratio 1:4:8 cement, sand and stone ballast 40mm nominal size

Provision for Course Rubble stone masonry with hard stone (Second short) under foundation and plinth with mortar of ratio 1:6 cement and course sand with fixing of bond stone at random position as required. Including all the labour, supply of material and T & P Required proper completion of work at the site

Provision for Course Rubble stone masonry with hard stone (first short) in superstructure with mortar of ratio 1:6 cement and course sand with fixing of bond stone at random position as required. Including all the labour, supply of material and T & P Required proper completion of work at the site

Provision for Coping with 50 mm thick sand stone on top of wall with 20 mm. thick bed of mortar of ratio 1:6 cement and c sand. Coping stone to be laid with fine dressing and making side end as semi-circular shap (Bull nose type). Including all the labour material and T&P. Required proper completion of work at the site

Provision for deep pointing (flash pointing) work with cement mortar of ratio 1:3 cement and C sand as per matching with original on stone work. after carefully racking of joints and washing of surface. Including all the supply of material labour and T.&P. Required proper completion of work at this site.

Provision for fabrication, supply and fixing of M.S. Grill railing with angle iron 50x50x6 mm, flat iron 50x6 mm, 16 mm dia bars fabricated as per designed by the department. Including all the supply of materials fabrication and fixing of the same. Required proper completion of work at the site.

Provision for fixing M.S. Gate with two leaf with angle iron 50x50x6 mm, flat iron 50x6 mm and 16 mm dia bars fabricated as per designed by the department . Including all the supply of materials fabrication and fixing of the same. Required proper completion of work at the site.

Provision for painting work on iron work on new work in small area by two coats of approved class synthetic paint over one coat of red oxide primer. Including carefully cleaning and washing of surface. Including all labour material and T.& P. Required proper completion of work at the site.

Provision for painting work on iron work on new work in small area by two coats of approved class synthetic paint over one coat of red oxide primer. Including carefully cleaning and washing of surface. Including all labour material and T.& P. Required proper completion of work at the site.

Provision for Laying of flag Stone flooring with 50mm thick flag stone matching with original colour and texture with mortar of ratio 1:6 cement, C. sand joints of floor not more than 5 mm thick including pointing of joints of same mortar. Including all the labour, supply of material and T.&P. required proper completion of work at the site.

Provision for earth work in filling with local soil free from grass, garbage and other foreign material. Including spreading of soil, proper ramening , watering and compaction .Filling of soil not more than 30cm thick profile. Including all the labour, material and T.&P. required proper completion of work at the site.

Provision for fixing of India Mark II hand pump with making bore of size 116/110mm up to 70mt. Deep in hard soil with rock including lowering with P.V.C. pipe 100m. Including all the supply of material, labour and T&P required proper completion of work at site.

Providing and fixing Port cabin size 3.00 x3.00 mt height 2.70 mt with wall panel made of 75 mm thick (insulated panels made out of 0.63 mm GI sheets on both sides with insulation of thermocole of 75 mm thick) and insulated roof panels made out of 0.63 mm thick GI sheets on both sides with insulation of thermocole of 75 mm thick with aluminium insulation inside, flush door with aluminium handle L-drop for locking arrangements size 2'6"x6'6". Modular Floor made out of MS pipe sections resting on ISMB/C and mounting with 18 mm BWP Ply to provide sturdy portable floor 6"-8" above ground level on top that superior quality vinyl sheets, complete with electrical fitting and fixtures (5Amp point inclusive of PVC battens, fixtures, fire and heat resistant wires) 2 light point, 1 -Exhaust fan point, 15 Amp points- power plug (6pin) 6mmm 2 FRHR wire with battens & accessories, Make ISI mark, wall mounted CFL lamp, Exhaust Fan (10" dia) internal accessories like on on hinged rail 76 cm & five nos. of grab rails 60 cm.

Provision for installation for cast iron benches as per designed by the department of skating. Capacity three persons with arms rest both sided. Including painting of benches with synthetic enamel paints of two coats over one coat of red oxide primer.

Provision for in environment development as grassing of ground with doob grass and show plants by levelling and ramming of ground with mixing of compost with soil. Including all the labour, material and T&P Required proper completion of work at the site.

Provision for making shed with laying of 0.88mm GI sheet over Skelton of angle iron 40x40x5mm. Iron pole of dia 10.00cm of thickness not less then 3.00mm installation of shed over platform for sculpture shed with iron pole of dia 10.00cm. iron pole grouted 30.00cm deep with cement, concrete, mortar of ratio 1:4:8 cement course sand ballast 40mm. Including painting of iron members with two coat of synthetic enamel paint and one coat of red oxide primer. Including all the supply of material labour and T&P. Required proper completion of work at the site.

M/S Raj Construction

M/S AASHIRWAD CONSTRUCTION