Karnataka

Financial Eval

Works

Buildings

CONSTRUCTION OF NEW FARMER/ FARM WOMEN HOSTEL ALONG WITH TRAINING HALL AT DISTRICT AGRICULTURE TRAINING CENTRE KUMTA UTTAR KANNADA DISTRICT

Public Works Department

PRAMC PWD Bengaluru | Karnataka

Amount: ₹1.9 CrCloses: 12 Jan 2026Closed

Timeline

Published1 Jan 2026
Closed12 Jan 2026
Financial Evaluation—
Award—

Bids

1 Bid12 Jan 2026

#	Company	Amount	Status
1	GANESH DEVAPPA NAIK ₹1.8 Craccepted-finance	₹1.8 Cr	accepted-finance

Tender Value

₹1.9 Cr

EMD Value

₹2.9 L

Closing Date

12 Jan 2026, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer

Office Number

Work Description

CONSTRUCTION OF NEW FARMER/ FARM WOMEN HOSTEL ALONG WITH TRAINING HALL AT DISTRICT AGRICULTURE TRAINING CENTRE KUMTA UTTAR KANNADA DISTRICT

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT29533/CALL-2

Reference Number

PWD/2025-26/BD/WORK_INDENT29533/CALL-2

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PRAMC PWD Bengaluru

Source Website

Subscribe to view

Documents Required

11 documents required · 11 mandatory

Technical Bid

RequiredTo qualify for award of this contract, each Tenderer should be registered as Class-I Civil Contractor in KPWD

RequiredAnnual turn over certificate

RequiredSECTION 2 ITT 3 2 To qualify for award of this contract each Tenderer in its name should have in the last five years ie 2020-21 to 2024-25 b Satisfactorily completed as prime contractor at least one similar nature of work Civil Engineering Construction and Building Works Only value not less than Rs.97.00 Lakhs.

RequiredSECTION 2 ITT 3 2 To qualify for award of this contract, each Tenderer in its name should have in the last five years ie 2020-21 to 2024-25 C Executed in any one financial year the following minimum quantities of work- 1. Solidblocks -910 Sqm 2.RCC/PCC -390 Cum 3. Steel -26.00 Tonne 4. Plastering- 2316Smtr 5. Flooring- 807Sqm 6. Painting- 3140Sqm

RequiredSECTION 2 ITT 32 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21 to 2024-25 a Achieved in at least two financial years a minimum financial turnover in all classes of Civil Engineering Construction and Building Works of Rs.387.00 Lakhs.

RequiredSECTION 2 ITT 3.3 Each Tenderer should further demonstrate liquid assets and/or availability of credit facilities of not less than Rs.71.00 Lakhs Credit lines/ letter of credit/ certificates from nationalized banks for meeting the fund requirement etc. in the format

RequiredSECTION 2 ITT 3 3 Each Tenderer should further demonstrate aAvailability by owning at least 50 percent of the required following key and critical equipments for this work b The remaining 50 percent can be deployed on lease/hire for all works provided the relevant documents commitment agreements etc for availability for this work are furnished

RequiredSECTION 2 ITT 3 5 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their Available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity AXNX1.5-B Where, A is Maximum value of civil Engineering works executed in any one year during the last five years updated to 2025-26 price level taking into account the completed as well as works in progress.

RequiredGST Registration Certificate

RequiredThe Contractor shall engage Registered Electrical Contractor for carrying out the electrical works and submit Consent Letter of the Registered Electrical Contractor in original with date shall be submitted duly signed in ink along with the technical bids

RequiredThe Contractor shall engage Registered Wter supply Contractor for carrying out the Water Supply works and submit Consent Letter of the Registered Contractor in original with date shall be submitted duly signed in ink along with the technical bids

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

GST Shall be paid to the tendered amount separately.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka Public Procurement Portal due to internet connectivity issues and technical glitches at bidder end.

The bidder shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The tender fee is non-refundable.

The employer reserves the rights to reject one or all tenders without assigning any reason.

The employer is not responsible for any delay in accessing Karnataka Public Procurement portal.

Contractors should be registered with KPWD Class-I Registration and the tenderer should submit the Registration Certificate along with technical bid.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.07 and Government letter no PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the orginal documents before approval.

All the items in the tender include all lead, lifts, labour, loading, unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of Engineer-in-charge of this work.

Contractors should follow strictly prevailing rules of labour act.

In case if the death of a contractor, after executing the agreement / commencement of the work, his legal heir, if an eligible registered contractor and is willing, can execute and complete the work, at the accepted tender rates, irrespective of the cost of the work.

The Item rates quoted shall include cost of Royalty charges on construction materials and other taxes as per rates provided in prevailing Govt orders at the time of execution and including cost and conveyance of all materials curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as directed by the Engineer-in-charge of the work.

All materials required for this work shall be procured by the bidder himself and should be got tested by the quality control authorities at his own cost before use on the work. Department will not supply any materials.

The tenderer should submit proposed methodology and programme of construction backed with equipment and material planning, & deployment duly supported with broad calculation and quality management , plan, proposed to be adopted justifying their capability of execution and completion of the work as per technical specifications and within the stipulated period of completion.

Materials like steel,cement etc., required for the work shall be procured by the tenderer themselves and should get tested by the quality control authority at his cost before used on the work.

All documents should be uploaded by the contractor is to be attested by the authorized notary or an officer not below the rank of Executive Engineer and should be produced for verification at any stage of process as and when saught for .Failure to produce original documents leads to rejection of Tender.

Financial Year will be reckoned as the period between first day of April and Thirty-first day of March of succeeding year (both days inclusive).

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Units, Rates & Prices shall be quoted by the tender in Indian Rupees only

Item for which no rates or price has been entered in will not be paid for by the Employer when executed & shall be deemed covered by the other rates & prices in the bill of quantities.

The royalty charges on construction materials will be deducted as per prevailing Govt orders.

The field Lab/Mobile Lab shall be preferably located, adjacent to the site with the required amenities as per the clause. Failing which 1% of the amount of work done will be penalized.

Tenderer shall obtain the Work done Certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the tender. The Original Certificate shall be produced at the time of opening of Technical Bids for physical verification.

Tenderers are requested to read the Bid documents carefully and upload the necessary documents before submission of their bid.

To qualify for award of this Contract, each tenderer should give all details and documents as per KW-4

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer PWD, PRAMC, during office hours on all working days. It may be noted that if any of the dates mentioned above happened to be a general holiday the next working day will hold good in lieu of the dates mentioned.

PERFORMANCE SECURITY: The successful tenderer shall furnish Performance Security Deposit (Achievement Guarantee ) at 5 percent of the amount put to tender with in 20 days after approve of tender plus additional security for unbalanced tender as per rule 29.5 of the tender and clause 44 of the agreement in the form of cash/Bankers Cheque,D.D,Pay order Bank Guarantee or FD,duly pledged in the nature of ENGINEER IN CHIEF , PRAMC

The Bidders shall note that the information furnished in technical Bid will be evaluated with respect to the Technical requirement Criteria set forth in the Bid Document, which is uploaded separately. The Bids meeting the minimum Technical criteria at the discretion of the Engineer-in-Charge shall only be qualified for financial Evaluation of Financial Bids.

The contractor should maintain the work during the defective liability period, i.e. for 2 years after the completion of work at his own cost.

Payment of EMD of shall be through E-Payment in favour of Executive Engineer, and shall be valid for 45 days beyond the validity of Tender.

The Contractor shall prior to commencing the works,effect and thereafter maintain insurance in the joint names of the employer and the contractor refer KW4 of SBD, clause 13 of condition of contract.

Technical Criteria

General

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

SECTION 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21 to 2024-25 (b) Satisfactorily completed as prime contractor, at least one similar nature of work (Civil Engineering Construction and Building Works Only) value not less than Rs.97.00 Lakhs.

Others -- Work done certificate issued by an officer of rank not below the rank of EE or equivalent

SECTION 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21 to 2024-25 (C) Executed in any one financial year, the following minimum quantities of work: 1.Solid blocks:910 Sqm 2.RCC/PCC:390Cum 3. Steel :26.00 Tonne 4.Plastering: 2316Smtr 5. Flooring: 807Sqm 6. Painting: 3140Sqm

Others -- Work done certificate issued by an officer of rank not below the rank of EE or equivalent

Capabilities of Vendor

To qualify for award of this contract, each Tenderer should be registered as Class-I Civil Contractor in KPWD

Others -- Valid KPWD Registration Certificate

SECTION 2 ITT 3.3 Each Tenderer should further demonstrate: (a)Availability by owning at least 50 percent of the required following key and critical equipments for this work. (b) The remaining 50 percent can be deployed on lease/hire for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished (a) Machineries to be owned: 1. Excavator 2 No. 2. Steel Centering and shuttering sheets: 2000 Sqm. 3. Min. 10cft capacity Concrete Mixer: 4 Nos 4. Water Tankers: 2 Nos. 5. Bar Bending and Cutting Machine: 2 Nos 6. Generator 500 KVA: 1 No. 7. Tipper 4 Nos. (b) MACHINERIES COULD BE ON LEASE or HIRE or OWNERSHIP: 1. Excavator 1 No. 2. Steel Centering and Shuttering sheets: 1000 Sqm. 3. Min. 10cft capacity Concrete Mixer: 2 Nos 4. Water Tankers: 1 No. 5. Bar Bending and Cutting Machine: 1 Nos 6. Generator 500 KVA: 1 No. 7. Tipper 2 Nos.

Others -- Hire / Lease agreement with original invoice of the original owner and specifying period of lease / hire

SECTION 2 ITT 3.5 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their Available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AXNX1.5-B)Where, A is Maximum value of civil Engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited.B is Value, at 2025-26 price level, of existing commitments and ongoing works to be completed during the next 11 months (period of completion of the works for which Tenders are invited)

Others -- List of existing commitments and ongoing works

Financial Status

Annual turn over certificate

Others -- Annual Turnover certificate for the past five years along with Balance sheets and UDIN mentioned duly attested by Charted accountant

SECTION 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21 to 2024-25 (a) Achieved in at least two financial years a minimum financial turnover (in all classes of Civil Engineering Construction and Building Works Only of Rs.387.00Lakhs.

Others -- Turnover certificate from Registered Chartered Accountant, Balance sheet and Income tax returns

SECTION 2 ITT 3.3 Each Tenderer should further demonstrate(b) liquid assets and/or availability of credit facilities of not less than Rs.71.00 Lakhs (Credit lines/ letter of credit/ certificates from nationalized banks for meeting the fund requirement etc. in the format

Others -- Banker certificate in the prescribed format issued by Nationalized bank as per KW-4

Others

GST Registration Certificate

Others -- Scan copy of GST Registration Certificate

The Contractor shall engage Registered Electrical Contractor for carrying out the electrical works and submit Consent Letter of the Registered Electrical Contractor in original with date shall be submitted duly signed in ink along with the technical bids

Others -- Consent Letter of the Registered Electrical Contractor in original with date, duly signed in ink

The Contractor shall engage Registered Wter supply Contractor for carrying out the Water Supply works and submit Consent Letter of the Registered Contractor in original with date shall be submitted duly signed in ink along with the technical bids

Others -- Consent Letter of the Registered Contractor in original with date, duly signed in ink

Fee & Financial Details

Tender Fee Amount

₹4,830

EMD Fee Amount

₹2.9 L

Important Dates

Last Activity

12 Jan 2026

Published

1 Jan 2026

Bid Opening

14 Jan 2026

Download Ends

7 Jan 2026

Pre-Bid Meeting

8 Jan 2026

BOQ Preview

•

BUILDING CIVIL COST

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever ...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever ...

•

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm ---- Including cost and conveyance of all materials, la...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm ---- Including cost and conveyance of all materials, la...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 300mm ---- Including cost and conveyance of all materials, la...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 300mm ---- Including cost and conveyance of all materials, la...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm ---- Including cost and conveyance of all mate...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm ---- Including cost and conveyance of all mate...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 200mm ---- Including cost and conveyance of all mate...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 200mm ---- Including cost and conveyance of all mate...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 150x10mm ---- Including cost and conveyance of all materi...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 150x10mm ---- Including cost and conveyance of all materi...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 250x10mm ---- Including cost and conveyance of all materi...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 250x10mm ---- Including cost and conveyance of all materi...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with

•

stainless steel screws etc. complete : 100x58x1.90mm ---- Including cost and conveyance of all materials, labour, hire charges o...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with

•

stainless steel screws etc. complete : 100x58x1.90mm ---- Including cost and conveyance of all materials, labour, hire charges o...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with

•

stainless steel screws etc. complete : 125x64x1.90mm ---- Including cost and conveyance of all materials, labour, hire charges o...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with

•

stainless steel screws etc. complete : 125x64x1.90mm ---- Including cost and conveyance of all materials, labour, hire charges o...

•

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. ---- Including cost and conveyance of all materials, l...

•

Providing and fixing aluminium die cast body tubular type universal hy- draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700...

•

Hold fasts ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead and lifts, loading and unloading charges etc... complete as directed as...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Door stopper 75mm ---- Including cost and conveyance of all materials...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Door stopper 75mm ---- Including cost and conveyance of all materials...

•

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic...

•

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat o...

•

Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...

•

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar t...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer ...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer ...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistan...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistan...

•

Newly Constructed Roof/bathroom/Toilet/balcony/utility with Cementatius waterproof coating - below 500 m2 - Providing and Applying CFTRI approved two component flexible polymer modified acrylic cem...

•

polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...

•

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever require...

•

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever require...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever ...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistan...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing and fixing MS Holdfast of size 260mm x 25mm x 5mm thk for fixing door frame to walls including cost of materials, cutting masonry pockets for receiving MS Holdfast, one coat of shop primer ,...

•

WATER SUPPLY & SANITARY

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

•

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...

•

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- Including cost and conveyance of all materials, labour, hire charge...

•

Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy ---- Including cost and conveyance of all materia...

•

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy ---- Including cost and con...

•

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good...

•

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern w...

•

Providing and fixing gun metal non- return valve of approved quality

•

(screwed end) : 40 mm nominal bore - Horizontal ---- Including cost and conveyance of all materials, labour, hire charges...

•

Providing and fixing gun metal non- return valve of approved quality

•

(screwed end) : 40 mm nominal bore - Horizontal ---- Including cost and conveyance of all materials, labour, hire charges...

•

Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length - 15 mm nominal bore ---- Including cost and conveyance of all materials, labour, hire charges of machineries an...

•

Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length - 20 mm nominal bore ---- Including cost and conveyance of all materials, labour, hire charges of machineries an...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 110mm dia PVC coupler...

•

Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 160mm dia PVC coupler...

•

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 110 mm dia PVC Elbows ---- Including...

•

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 160 mm dia PVC Elbows ---- Including...

•

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 50 mm dia PVC Tee ---- Including cost an...

•

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 110 mm dia PVC Tee ---- Including cost a...

•

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 160 mm dia PVC Tee ---- Including cost a...

•

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 110 mm dia PVC BEND ---- Including cos...

•

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 160 mm dia PVC BEND ---- Including cos...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fix...

•

Providing and fixing PTMT grating of approved quality and colour.- Circular type - 125 mm nominal dia ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equip...

•