Widening of the Atheha Umrar Nanauti Mustafabad Rehua Lalganj Agai Raniganj Narai Chainage 25.000 to 39.000 km and the widening and strengthening of the road from chainage 39.000 to 42.000 km in Pratapgarh District

Excavation for road work in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m as per morth Ref. no. 301 including Labour Cess but excluding GST.

Construction of embankment with approved material obtained from right of way with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of . Sl. no. 3.16 Ref. no. 305 including Labour cess but excluding GST.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. Sl. no. 3.17 Ref. no. 305 Campaction only including Labour cess but excluding GST.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. including Labour cess but excluding GST.

Scarifying the existing bituminous road surface to a depth of 20 mm and disposal of scarified material with in all lifts and lead upto 1000 metres. As per Morth Ref. n0. 305.4.3 including Labour cess but excluding GST.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including Labour Cess and Royalty but excluding GST.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. as per Morth Ref. no.406 B including Labour Cess and Royalty but excluding GST.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical meansas per Morth Ref. no.502 A including Labour Cess and Royalty but excluding GST.

Providing and laying dense graded bituminous macadam with higher capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compactionas per Morth Ref. no.505 B complete in all respects. including Labour Cess and Royalty but excluding GST.

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared granular surface cleaned with mechanical broom. as per Morth Ref. no.503 I including Labour cess and Royalty but excluding GST.

Providing and laying bituminous concrete with higher capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Morth Ref. no.507 B complete in all respects including Labour cess and Royalty but excluding GST.

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. including Labour cess and Royalty but excluding GST. . as per Morth Ref. no.601

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing including Labour cess and Royalty but excluding GST. as per Morth Ref. no.602

Dismantling oexisting structures like culverts, bridges, retaining walls, and other structure comprising of masonry, cement concrete, wood, work, steel work, including T&P and scaffolding wherever necessary, sorting the disantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres including Labour Cess but excluding GST.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per Morth Specification as per Morth Ref. no. 304 . including Labour Cess but excluding GST.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material Morth Ref. no. 304 .. including Labour Cess but excluding GST.

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. including Labour cess and Royalty but excluding GST.

First class brick work in 1:3 cement and coarse sand mortar in foundation and plinth including supply of all materials,labour and t&p etc required for proper completion of the work as per Morth Specification Clause-1300 & 2200. including Labour cess and Royalty but excluding GST.

Reinforced Cement Concrete (M-30) in Open Foundation complete as per Drawing and Technical Specifications. including Labour cess and Royalty but excluding GST.

Reinforced Cement Concrete (M-25) in Open Foundation complete as per Drawing and Technical Specifications. including Labour cess and Royalty but excluding GST.

Reinforced Cement Concrete (M-20) in Open Foundation complete as per Drawing and Technical Specifications. including Labour cess and Royalty but excluding GST.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and as per Morth Specification Clause-1600 including Labour cess and Royalty but excluding GST.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications including Labour cess but excluding GST.

Providing and Laying 40mm. Guage O.B.B. ballast (dry brick ballast) with local sand Complete as per S.I. No. 293 in foundationincluding Labour cess and Royalty but excluding GST. including Labour cess and Royalty but excluding GST.

Supply and Laying of H.P. NP3 Including cartage upto site laying with coller joint filling in cement mortor with Jute, labour T&P etc. 1000 mm dia including Labour cess and Royalty but excluding GST including Labour cess but excluding GST.

Supply and Laying of H.P. NP3 Including cartage upto site laying with coller joint filling in cement mortor with Jute, labour T&P etc. 600 mm dia including Labour cess and Royalty but excluding GST including Labour cess but excluding GST.

Supply and Laying of H.P. NP3 Including cartage upto site laying with coller joint filling in cement mortor with Jute, labour T&P etc. 350 mm dia including Labour cess and Royalty but excluding GST including Labour cess but excluding GST.

Pointing with cement mortar (1:3 ) on brick work in substructure as per Morth Specifications Clause. 1300 & 2200 including Labour cess and Royalty but excluding GST

12 mm thick plaster with cement & fine sand of 1.25 fineless modulous mortor in (1:4 ) as per Morth Specifications Clause. 1300 & 2200 including Labour cess and Royalty but excluding GST

Rate to be quoted without G.S.T. & G.S.T. Shall be Paid extra as per Prevailing rules.

Please Enable Macros to View BoQ information