Comprehensive Repair/Maint of Certain Bldgs of B/R Nature and SWT in South Side of Runway in Tech Area at AF Stn Bhisiana

Amount

Taking down cement of cement lime plaster on brick or concrete surfaces, static water tanks etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for 15 mm thick cement plaster in CM (1:4) on fair faces of brick or concrete wall surfaces and finishing the surface even and smooth (without using extra cement) with water proofing compound @ 3% by weight of cement as per manufacture etc, complete all as specified and as directed. by Engr-in-Charge. Note: Water proofing compound shall be measured and paid separatly.

Supply only Integral water proofing compound all as specified and as directed.

S&F chicken wire mesh to providing under plastered surfaces after removing of existing damged plaster surface complete all as specified.

M&L for 15 mm thick, cement plaster in CM (1:6) on fair faces of brick or concrete on wall surfaces and finishing the surface even and smooth (without using extra cement) etc, complete all as specified as directed by Engr-in-Charge.

M&L for 5 mm thick cement plaster in CM (1:3) on fair faces of concrete surfaces as in ceiling and finishing the surface even and smooth (without using extra cement ) etc, complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of walls, pillars, chajjas etc., applying one coat of wall putty and two coats of all weather exterior emulsion paint over a coat of primer complete all as specified and as directed.

M&L for prepration of new plastered surfaces of ceiling and applying three coats of white wash on ceiling.

M&L for preparation of new concreted surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening.

Demolition of Brickwork or stone/ boulder masonary, built in cement mortar or cement lime mortar.

M&L for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed by Engr-in-Charge.

M&L for providing designer Dholpur Rajasthan Naksh Stone jallies 40 to 50mm thick (measured solid), type set in 1:6 cm with pigment including all moulding and posts, dismantling of existing broken jalies all as specified as directed.

S&F as in repairs replacement mild steel, plain black sheet 1 mm thick as in Hood cover of rolling shutter, made to shape and size as required with and including one shop coat of red oxide primer etc, complete all as specified and directed by Engineer-in-Charge.

S&F as in replacement ball bearing of No 6202 suitable size for making the steel rolling shutters operational complete all as specified and directed by Engineer-in-Charge.

S&F as in replacement safety lever locks, mild steel with 4 lavers for rolling shutters of standard quality as approved by GE complete all as directed by Engineer-in-Charge.

Taking down steel rolling shutters, any type with two ball bearings as specified including top cover, anchor rod etc complete all directed by Engineer-in-Charge.

S&F steel Rolling Shutters, mannual operated type with ball bearinngs, complete all as specified in SSR Part-I, including top cover, anchoring Rod, Hasp & Staple and one shop coat of primer; erected in position (thickness of sheet/ lathes 1 mm and curtain inter locking curl 75 to 85 width of each trip of each strip) and making good the disturbed surfaces of walls/pillars in cement and sand mortar 1:4 and PCC 1:2:4 type B-1 for hold fasts etc, complete all as specified. Note: (i) Quoted rate includes making good the disturbed surfaces as per existing finished specifications. (ii) Quoted rate includes necessary use and waste of form work, if required.

Preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coast of synthetic enamel paint over a coat of redoxide paint exposed to view surfaces complete all as specified.

Fixing in repairs to steel rolling shutters of any size without ball bearing as specified incl top cover anchoring rod hasp and stapple and making in serviceable condition after replacement the unserviceable parts refixing in same opening and making good in CM 1:3 to match the existing complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for screed bed or bedding layer of mortar (1:6) ,15 mm thick for laying floor finishes complete all as specified and as directed.

M&L rendering 10 mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces, including finishing the surfaces even and fair to receive the wall tiles etc all as specified and as directed.

M&L coloured joint free Non Skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350mmx250mmx7 mm / 450/350/7mm thick thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles compete all as specified and as directed.

M&L for joint free light shade vitrified tiles 9 to 10 mm thick (square /rectangular) polished, area of each tile not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for joint free light shade vitrified tiles 9 to 10mm thick (square/rectangular) on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types light shade over 15mm thick screed bed in CM 1:6 complete.

Demolition of cement concrete (unreinforcement) in any description and in any position not otherwise specifically provided for.

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

S&F of anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling incl 2mm dia GI wire for hangers where ever reqd all as specified.

M&L perforated partical board for insulation & accoustic purpose 60cmx60cm and 12mm thick fixed with nails to frame work on snap grid and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces and all as directed.

M&L for preparation including complete removal of old finishes and apply two coats of oil bound distemper over a coat of priming plastered and other surfaces with alkali resistant priming paint on ceiling incl necessary preparation.

S&F Solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing shown in SSR Part-I complete all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing shown in SSR Part-I complete all as specified and directed .

M&L solid PVC sheet moulding consting of 5mm thick wood grain printed PVC sheet as approved by GE all as directed.

Taking down Chowkhats or frames not exc 1.5 Sqm each (without taking off shutters from the frames).

Taking down chowkats & shutters without taking off shutters from the frame, size of opening exc. 1.50 sqm but not exc 4 sqm each complete all as specified and as directed.

Taking down shuttter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.

Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and Drg.

S&F of anodised alluminium frame for doors, windows, ventilatrs with one or more rebates includingAluminium beading, rubber bead, Tension rods joining cleat for fixing etc, complete all as specified.

S&F of anodised aluminium door shutters, alluminium sections weighing 0.55 Kg/mtr including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc, with powder coating of any colour (thickness of powder coating not less than 50 micron) complete all as specified.

S&F in repairs aluminium powder coated window/door grills, mesh size 50mmx50mm thickness 3.8mm complete all as specified.

S&F anodised aluminium window and ventilator shutters, side hung type with out sash bars, aluminium section weighing 0.55kg/mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100 mm long (2 Nos) suitable handle (1 No) with powder coating of any colour (thickness of powder coating not less than 50 micron).

S&F for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L 12 mm thick both sides prelaminated Particle board, exterior grade, fixed with screws to frame work in cup board shutters, partitions, shelves etc.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed of size 105 X 60mm.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed of size 125 X 60mm.

M&L for PCC (1:3:6) type C-1 using 20 mm graded agg as in back of pressed steel chowkhats etc complete all as specified and directed.

S&F 2nd Class hard wood (Hollock) 35mm thick plain framed, factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated.

S&F glazed and skelton shutter 2nd class hard wood 35mm thick,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing including S&F stainles wire cloth of dia 1.14mm and avg aperture width 0.36mm and Rate tail type spring 200mm complete.

S&F 100mm Butt hinges medium weight, cold rolled mild steel.

S&F 200 Aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 200 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F 300 mm Mild steel Sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

S&F 150mm Aluminium handles, cast type anodised.

S&F floor door stopper of size 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring ficed in floors.

100mm size PVC butt hinges all as specified.

100mm size PVC handles all as specified and directed.

150mm long PVC tower bolt all as specified and directed.

S&F in repairs mortice lock verticle type size 100 mm, 4 levers for Aluminium doors of MS complete with handle all as specified and directed by Engr-in-Charge.

S&F box type steel windows glazed & gauged factory made with side hung shutters including box type hinges with steel handle and steel peg stay, including supply and fixing Stailess steel wire cloth 1.14mm dia and 3mm thick glass fixing with putty and glazed pins and necessary grills and guard bars complete and making good the disturbed portion with PCC or Plaster and painting the surface to match with the existing surface complete all as specified and as directed.

S&F steel ventilator glazed & gauged factory made with top hung type shutters including hinges and steel handle and steel peg stay, including supply and fixing Stailess steel wire cloth 1.14mm dia and 3mm thick glass fixing with putty and glazed pins and necessary grills and guard bars complete and making good the disturbed portion with PCC or Plaster and painting the surface to match with the existing surface complete all as specified and as directed.

M&L applying Two coats of Synthetic enamel paint over a coat of pink primer including prepration of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth.

Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 Sqm in each pane complete.

S&F 5.5 mm thick tinted glass ordinary quality and glazing with oil putty or with wooden/ alluminium shutter (supplied alongwith shutter) exc 0.50 sqm each complete all as specified.

S&F 3 mm thick fibre glass reinforced translucent plain/ corrugated sheeting including cutting as per required size of existing glass/fibre sheet and fixed with flat iron beading, coach screw and washer in roof, wall etc including taking down existing sheet.

S&F Rough cast wired glass, 6.4mm thick exc 0.5 sqm but n.exc 0.75 sqm and glazing with oil putty in square complete all as specified and directed.

S&F as in repairs galvanised stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tack or galvanised wire staple complete.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and as directed by Engineer-in-Charge.

S&F as in repairs 75mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) but as in repairs.

S&F 75mm bore (Sand Cast) Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors but as in repairs.

S&F 100mm bore (Sand Cast) cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors but as in repairs.

S&F 75mm bore (Sand Cast) cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls but as in repairs.

S&F 100 mm bore (Sand Cast) cast iron soil, waste and vent pipes in any length with or without ears, with cement joints , fixed to walls but as in repairs.

S&F 75 mm dia CI bends (any radius), diminishing pieces or tapers provided with access door in repairs.

S&F 100 mm dia CI bends (any radius), diminishing pieces or tapers provided with access door in repairs.

S&F 125 mm dia CP grating openable type with hinge (as per sample) over nahani/floor trap including embedding the same in white/coloured cement to match complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and as directed by Engineer-in-Charge.

M&L 15 mm dia tubes medium grade galvanised with all fitting and fixed to walls and ceilings or laid in floors including taking down and cleaning for removal to store etc complete all as specified.

M&L 20 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down and cleaning for removal to store etc complete all as specified.

S & F in repairs Vitreous China Squatting Pan 'Orissa pattern size 580x440 white with integral foot rests with `P' or `S' trap, front or back inlet including connection to trap and to flushing pipe, anti-syphonage pipe etc, including trap set in and including concrete complete including making good to floor.

S & F Vitreous Ware wash down water closet (Pedestal), white (EWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cystren including concrete complete including making good to floor.

M&L Flush pipe of Polyethylene of low or high density or PVC 32 mm dia, for low level cistern.

S&F in repairs plastic water closet seat cover white close pattern with flat bottom and cover complete all as specified as direected.

S&F in repair health faucet with 8 mm dia, 1.5 mtr long flexible tube & wall hook, all as specified and directed.

S&F in repair 10 Liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and flush pipe of polyetylene of low or high density or PVC 32 mm dia connections pipe complete.

S&F in repairs vitreous china WHB white flat back size 550 x 400 mm including brackets, 32 mm dia waste fittings brass CP for WHB & CP pillar tap, sink etc with long shank screwed and fly nuts, flags and bedded in red lead cement and outer end fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15mm dia Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe .

S&F in repairs 15 mm bore Stop Valve fancy type chromium plated with long shank and cup (concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed in repairs.

S&F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm.

S&F Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges.

Dismantling water tanks exc 250 ltr and nexc 500 ltr and removing to store.

M&L for Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F 20mm Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs.

S&F ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20mm dia of pipe complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including clamps, nut bolts including dismantling of old AC rain water pipe etc.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings any gauge, thickness and in any position including Nainital or similar pattern roof coverings.

M&L 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L hook or Cranked bolts.

M&L Asbestos Cement two piece adjustable plain wing ridge 6 mm thick and fixed with L hook or Cranked bolts.

S&F prepainted galvaliume aluminum zinc coating GI based corruagted steel sheet 0.45 mm thick of an coloure having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as directed.

Dismantling posts or struts, purline, rafter etc (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground.

Excavating in soft/loose soil as in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm.

Dismantiling of mild steel work of any description not other wise provided for completed all as directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, SWT covers and similar work conforming to Fe-290 Gde-E-165 and complete all as directed.

Dismantling expanded metal, any thickness or mesh not exc 4 kg weight per sqm, fixed with steel or wood fillets, if any.

S&F welded steel wire fabric to angle iron frame not exc 4 Kg weight per square metre all as specified and directed.

S&F rolled section as in main and cross beams, hip and jack rafter, purlines where connected to common rafter and running rails and guides for sliding doors, fixed with angle cleats or other connections Fe-410 (Gde-E-250), quality 'A' all as specified as directed.

M&L for PCC type B-2, 1:2:4 (using 40mm graded stone aggregate) for foundation filling, mass concrete and etc complete all as specified and as directed.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed as in repairs complete all as specified.

S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg of aluminium (extruded section body) and fixed complete all as specified.

S&F in repairs Vanishing blinds vertical made of multiple coloured imported fabric strips 100mm wide hanged on aluminium channel 50mm wide with sliding average including taking down old and fixing to existing window opening with reqired drilling and making good complete all as specified and directed.

S&F in repairs Harrison curtain rails anodised aluminium alloy with fixing brackets, stops, roller etc.

classic estate developers

M/s Vee Kay Associates

M/s Kamal Builders

M/s Luxmi Constructions