CERTAIN REPAIR TO CENTRAL INSTITUTES UNDER AGE BR II AT AMRITSAR CANTT

Amount

Taking down cement plaster of any thickness from wall's/ceiling including raking out joints hacking for key scrubbing down with water and dispose off debries out side the premises where directed ; Complete all as specified and directed.

Material and Labour for 12 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finsihed the surfaces even and smooth without using extra cement ; Complete all as specified and directed.

Material and Labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, finishing the surface fair and even with water proofing compound ; Complete all as specified and directed. (Note water proofing compound will be measured and paid separately as supply only)

Material and Labour for 5mm thick rendering on concrete surfaces in cement mortar 1:3 , as in ceiling, finsihed the surfaces even and smooth without using extra cement ; Complete all as specified and directed.

Supply only integral water proofing compound confirming to IS-2645 ; Complete all as specified and directed.

Material and labour for damp proofing treatment to wall with two component acrylic polymer cementitious water proof elastomeric coating food grade mix to form uniform slurry and apply with paint brush as first coat then laying a layer of fibre glass mesh cloth as first coat is still green with overlap of joints of fibre mesh not be less than 10mm, then finally apply second layer mix by brush to entire surface of container covering 0.6-0.78 sqm/G at 1mm thickness in two coats depending on the level of substrate and curing it minimum 3 days ; Complete all as specified and directed. Note : Quoted rate shall be deemed to be inclusive of all materials, labours, tools and plants, scaffolding and working upto height 6m etc.

Material and Labour for Preparing of new plastered surface and applying two coats of cement base paints on walls ; Complete all as specified and directed.

Material & Labour for preparation of newly plastered wall surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and exterior paint of required shade @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm ; Complete all as specified and directed.

Material and Labour for preparation of plastered surfaces over 2mm wall care putty to make surface smooth and applying two coats of oil bound distemper over priming coat on walls ; Complete all as specified and directed.

Material & Labour for preparation of newly plastered wall surface and applying two coats of Acrylic Smooth interior paint of required shade,applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm ; Complete all as specified and directed. complete.

Material and Labour for preparation of new plastered surfaces and applying three coats of white wash on ceiling ; Complete all as specified and directed.

Material and Labour for preparing old decorated plastered/unplastered wall surfaces including cornices by brooming down with steel wire brushes and scraping down smokes, spots etc applying one coat of oil bound distemper including preparation with wall care putty to make surface smooth as required ; Complete all as specified and directed.

Material and Labour for complete removal of existing treatment on old decorated plastered/unplastered wall surfaces including cornices by brooming down with steel wire brushes and scraping down smokes, spots etc and applying Two coats of Oil Bound Distemper over priming coat and wall care putty as required ; Complete all as specified and directed.

Material & Labour for preparation of newly plastered wall surface and applying two cotas of Acrylic Smooth exterior paint of required shade,applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm ; Complete all as specified and directed.

Material & Labour for preparation old plastered wall surface and applying one coat of Acrylic Smooth exterior paint of required shade,applied @ 1.67 ltr/10 sqm over ; Complete all as specified and directed.

Material and Labour for preparation of old surfaces and applying two coats of white wash on ceiling ; Complete all as specified and directed.

Material and Labour for Preparing of old plastered surface and applying one coat of cement base paint on walls ; Complete all as specified and directed.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) ; Complete all as specified and directed.

Taking down Chowkats or frames from the opening of size exceeding 1.5 sqm but n. exc. 4 sqm each with shutters ( without taking off shutters from the frames) ; Complete all as specified and directed.

Taking down shutter of any description size but exc 1 sqm and n.exc 2 sqm ; Complete all as specified and directed.

Supply and Fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE -290 Gde E-165 ; Complete all as specified and directed.

Supply and Fixing factory made 2nd class hard wood Glazed and skeleton shutters 30 mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters and fitted to chowkats ; Complete all as specified and directed.

Supply and Fixing factory made 35mm thick 2nd class hard wood panelled shutters with lock rail & panel of 9mm BWP commercial ply or 12mm thick vineered particle board with commercial vineering on both faces, the size of rail & styles ; Complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bed blocks for hold fast & similar work etc incl. necessary form work; Complete all as specified and directed.

Supply and Fixing for Factory made single extructed WPC but frame size 60 x 100 mm (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length ; Complete all as specified and directed.

Supply and Fixing for Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 35 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw ; Complete all as specified and directed.

Supply and Fixing factory made 30 mm thick flush shutters solid core construction with block board core and plywood face panels ; Complete all as specified and directed.

Supply and Fixing in repairs door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed ; Complete all as specified and directed.

Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ; Complete all as specified and directed.

Supply and Fixing Anodised aluminium frame for doors powder coated (minimum thickness of powder coating shall not be less than 50 micron),windows,ventilators,side hunge one or more rebates including necessary jointing cleats,glazing clips including taking down and removal old complete all as specified and directed. Note:- Glass pane and wire mesh as required shall be measured and paid for separetely

Supply and Fixing Anodised aluminium door shutters powder coated (minimum thickness of powder coating shall not be less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including taking down and removal old complete all as specified and directed. Note:- Glass pane and wire mesh as required shall be measured and paid for separetely.

Supply and Fixing powder coated(Min thickness of powder coating shall be 50 micron) aluminum windows shutter of size min 18mmx50mm for sliding type windows of standard tubular sections of approved make having glazed panels or glazed and gauzed panels of appropriate size running on seperate tracks in the channel conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. All the panels shall be of appropriate size having overlaps as required and including all required beadings, clips, rollers, rubber gaskets, cleats,complete and powder coating in approved shade and colour including taking down and removal old complete all as specified and directed. Note:- Glass pane and wire mesh as required shall be measured and paid for separetely.

Supply and Fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixinf approved anodised aluminium standard section around the opening, including taking down and removal old complete all as specified and directed.

Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading ,as per instructions of manufacturer ; Complete all as specified and directed.

Supply and Fixing toughned glass, 10mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. ; Complete all as specified and directed.

Supply and Fixing figured glass, 5mm thick ordinary quality, in squares Not ,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading ; Complete all as specified and directed.

Supply and Fixing in repairs, Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm. ; Complete all as specified and directed.

Supply and Fixing Brass mortice lock,4 levers, verticle type, size 100 mm, ; Complete all as specified and directed.

Material and Labour for two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of previously untreated surfaces. ; Complete all as specified and directed.

Material and Labour for two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of previously untreated surfaces. ; Complete all as specified and directed.

Supply and Fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete incuding taking down ; Complete all as specified and directed.

Supply and Fixing in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples window / wooden door ; Complete all as specified and directed.

Hacking out old broken glass any thickness, size, quality or description from steel frames with oil glazing pin, glazed with putty or fixed with beads ; Complete all as specified and directed.

Supply and Fixing 3mm thick ordinary quality sheet glass, not exceeding 0.50 sqm in each pane including and glazing with oil putty ; Complete all as specified and directed.

Supply and Fixing 250 mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. ; Complete all as specified and directed.

Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed. ; Complete all as specified and directed.

Supply and Fixing 150mm long Aluminium handles, cast type anodised. ; Complete all as specified and directed.

Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel ; Complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding with backing layer , removing serviceable tiles to store and rubbish off the premises ; Complete all as specified and directed.

Material and Labour for non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and Labour for Vitrified ceramic light shade tiles 8mm to 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed or bedding layer of cement mortar(1:6) for laying floor finishes ; Complete all as specified and directed.

Material and Labour for glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in cement mortar 1:4 on brick surface ; Complete all as specified and directed.

Supply and Fixing in repairs vitreous china washbasin, white, flat back, size 550 x 400mm, including brackets & including 32mm bore waste fitting brass, CP for glazed ware basin etc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed including pedastal for wash basin ; Complete all as specified and directed.

Supply and Fixing in repairs health faucet ; Complete all as specified and directed.

Supply and Fixing in repairs vitreous china wash down water closet pedestal pattern pan (coupled closet ) white /coloured including vitreous china flushing cistern flush pipe seat, cover cistern cover ; Complete all as specified and directed.

Supply and Fixing in repairs replacement vitreous china wash down water closet pan (pedestal pattern) white with trap including connection to existing out joint pipe, flushing pipe or cistern, antisyphonage pipe, including plastic water closet seat white closed pattern with flat botom and cover mild steel chromium plated or aluminium plated or aluminished hinging device ; Complete all as specified and directed.

Supply and Fixing in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia ; Complete all as specified and directed.

Supply and Fixing in repairs CP Jet spray suitable for EWC ; Complete all as specified and directed.

Supply and Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail ; Complete all as specified and directed.

Supply and Fixing in repair PVC connection 15mm size with PTMT nuts of length 450mm. ; Complete all as specified and directed.

Supply and Fixing in repairs pillar taps cast copper alloy 15mm bore with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed ; Complete all as specified and directed.

Supply and Fixing in repair Brass chromium plated Pillar mixer with bend pipe in repairs suitable for mixing Hot & Cold water and making leakage free connection with wall tiles & GI pipes. ; Complete all as specified and directed.

Supply and Fixing in repair Brass chromium plated Wall mixer with bend pipe in repairs suitable for mixing Hot & Cold water and making leakage free connection with wall tiles & GI pipes. ; Complete all as specified and directed.

Supply & Fixing in repair vitreous china urinal half stall type with CP spreader white including CP waste coupling with grating and union for discharge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe ; Complete all as specified and directed.

Supply & Fixing in repairs rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore and including dismantling of old water tank. ; Complete all as specified and directed.

Supply & Fixing in repairs rotational moulded polythene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore and including dismantling of old water tank. ; Complete all as specified and directed.

Supply and Fixing in repairs 20mm bore, Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed ; Complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm ; Complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 20mm ; Complete all as specified and directed.

Supply and Fixing 15mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors ; Complete all as specified and directed.

Re-fixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc ; Complete all as specified and directed.

Supply and Fixing 20mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors ; Complete all as specified and directed.

Re-fixing for 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc ; Complete all as specified and directed.

Supply and Fixing in repairs 15mm bore Concealed fancy type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and directed.

Supply and Fixing in repairs 15mm bore fancy type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and directed.

Supply and Fixing in repairs of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass ; Complete all as specified and directed.

Supply and Fixing in repairs 100mm dia CP grating with or without hole type ; Complete all as specified and directed.

Supply and Fixing in repairs CP brass towel rail of 20mm dia and 600mm long ; Complete all as specified and directed.

Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm ; Complete all as specified and directed.

Supply and Fixing in repairs soap dish fixed to walls with chromium plated brass screws ; Complete all as specified and directed.

Dismantling of PVC pipe of 75/100mm dia fixed with cement joint ; Complete all as specified and directed.

Material and Labour 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement ; Complete all as specified and directed.

Supply and Fixing PVC (SWR) 110mm dia pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors ; Complete all as specified and directed.

Supply and Fixing PVC (SWR) 110mm dia bends any radius ; Complete all as specified and directed.

Supply and Fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors ; Complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar ; Complete all as specified and directed.

Material and Labour Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in cement mortar 1:4 ; Complete all as specified and directed.

Dismantling boarding with frame , any description , fixed in any position with screws ; Complete all as specified and directed.

Material and Labour for Gypsum board 12 mm thick Seamless calcum silicate in ceiling made out of 1800x1200 size board of siliceous and calcareous material reinforced with fixed with screw including GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre andas per manufacturers instructions incl preparation of new surfaces & applying two coat of OBD on ceiling over chalk whitening ; Complete all as specified and directed.

Supply and Fixing in repairs 25mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc.; Complete all as specified and directed.

Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) /fibre sheet and in roof coverings.; Complete all as specified and directed.

Dismantling of RCC Post any section embadded in concrete, brick masonary ; Complete including demolition of concrete in foundation bed thereof complete all as specified and directed.

Material and Labour for Cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete of posts etc. ; Complete all as specified and directed.

Supply and Fixing post and strut in fencing including cutting tops to shape as directed drilling holes notching for wire flat iron fillet ( for securing wire mesh) in including all necessary drilling bolting and rivetting conforming to Fe-290 Gd-165.; Complete all as specified and directed.

Supply and Fixing Fibre glass reinforced translucent sheeting plain 2mm to 3mm thick of an colour having tensile strength of as in roof covering/ cladding to wall, fixed with self tapping screws ; Complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar as cutting, opening of existing wall ; Complete all as specified and directed.

Material and Labour for brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in cement mortar 1:6 ; Complete all as specified and directed.

All as per item No. 97 above but except bricks (old bricks obtained from demolition shall be reused after necessary cleaning of mortar).; Complete all as specified and directed.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in cement mortar 1:4 ; Complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) complete all as specified and directed.

Material and Labour for point wiring drawn in existing concealed conduit for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately

Material and Labour for point wiring drawn in existing concealed conduit for one three pin socket outlet 5 Amps independent board ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

Material and Labour for point wiring drawn in existing concealed conduit for one three pin 5 Amps socket outlet on the same board with other switches ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

Material and Labour for point wiring drawn in existing concealed conduit for one light point controlled by two way switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

All a per item No. 101 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi stranded conductor connecting to common earth dolly ; Complete all as specified and directed.

Material and Labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

Material and Labour for surface point wiring for one three pin socket outlet 5 Amps independent board ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

Material and Labour for surface point wiring for one three pin 5 Amps socket outlet on the same board with other switches ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

Material and Labour for surface point wiring for one light point controlled by two way switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

All a per item No. 106 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly ; Complete all as specified and directed.

Supply and Fixing Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and Fixing Modular switch flush type two way 6 Amp, 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and Fixing Modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

Supply and Fixing Modular switch flush type one way 16 Amp, 230 volts complete all as specified and directed by Engr-in-Charge

Supply and Fixing Modular socket 6 /16 Amp 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

Supply and Fixing Modular switch bell push swiwch 6 Amp 1 module complete all as specified and directed by Engr-in-Charge.

Supply and fixing ceiling rose 65X50 mm three terminals ; Complete all as specified and directed.

Supply and Fixing Lamp holder bakellite type with black plate suitable for batten fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of Ding Dong bell AC 230 Volts ; Complete all as specified and directed.

Supply and Fixing Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts ; Complete all as specified and directed.

Supply and Fixing in repairs for vertical sheet steel metal enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper wire of suitable size from the MCCB to the out going circuits one incoming MCCB and suitable outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories. (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. ; Complete all as specified and directed.

Supply and fixing in repairs sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 8 ways including necess ; Complete all as specified and directed. complete all as specified.

Supply and fixing in repairs sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 12 ways including necessary brick work and plaster to match with the existing surface ; Complete all as specified and directed.

Supply and fixing in repairs MCB single pole 6 to 32 Amps ; Complete all as specified and directed.

Supply and fixing in repairs MCB DP 40 Amps 240V, 10 KA, ; Complete all as specified and directed.

Supply and fixing in repairs 40 to 63 Amps MCB TPN, 415 Volt ; Complete all as specified and directed.

Supply and Fixing in repairs of Sheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps ; Complete all as specified and directed. (for AC and geyser).

Supply and Fixing in repairs ,Fresh Air fan of size 250mm, Plastic body 1200RPM, electrically driven, 230volts, 50Hz, single phase, AC supply, copper winding dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to fan ; Complete all as specified and directed. Notes : (i) Provision of making suitable opening for fixing air fan as required shall be deemed included in the quoted rate of item. (ii) Old retrieved material obtained from this item shall be deposited in MES store yard.

Supply and Fixing in repairs , Exhaust fan of size 300mm, Heavy duty 1200RPM, electrically driven, 240volts, 50Hz, single phase, AC supply, copper winding dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to exhaust fan for giving connection ; Complete all as specified and directed. Notes : (i) Provision of making suitable opening for fixing air fan as required shall be deemed included in the quoted rate of item. (ii) Old retrieved material obtained from this item shall be deposited in MES store yard.

Supply and fix in replacement LED tube light 20 watt, (4' long), 6500K, wall mounted, E-lite LED curve with high lumen batten with efficacy not less than of 100 lumens, with integrated electronic driver complete with all accessories complete all as specified and directed.

Supply and fix in replacement LED decorative Gate ligh/Garden lights 20 watt light fitting with all accessories including making connections by using suitable size of PVC wire any type complete all as specified and as directed.

Supply and fixing Iin replacement LED street light fitting powder coated pressure die cast alminium compact High power LED street light with heat resistant toughened glass for 25 watt with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device bracket made out of GI Pipe 40mm medium grade 1.2 mtr long made to shape with fixing clamps of MS Flat 40x6mm nuts bolts Complete all as specified and directed.

Supply and fix in replacement SMD/PLUTO NEO LED luminare 36/40 watt 600 x 600 mm 220 V AC LED ceiling light recessed/surface type with high efficiency PMMA diffuser soft glass free light complete with driver ,holders and LED lamps stable for roof/ceiling including fixing arrangements and connecting with copper wire flexible three core 1.5 sqmm PVC insulated 3 core cable from ceiling rose to light fitting complete all as specified and as directed.

Supply and fix in repalacement decorative Ceiling light 12 watt light fitting LED type with accessories including any type complete all as specified and as directed.

Supply and Fixing in replacement 1100 volts grade heavy duty PVC cable insulated aluminium conductor served with inner sheating of PVC tape and over all PVCsheathed in service connection stranded conductor flatr 6 sqmm 2 core cable allas specified and directed.cted and specified

Supply and Fixing in replacement, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed.Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable shall be measured as one unit/ one running metre.

Supply and Fixing in replacement, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed.Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable & conduit shall be measured as one unit/ one running metre.

Supply and Fixing in replacement, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable shall be measured as one unit/ one running metre.

Supply and Fixing in replacement, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed.Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable & conduit shall be measured as one unit/ one running metre.

Material and Labour for repairs of Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 m distance from earth pit) and testing on completion including necessary excavation and earth work, charcoal dust and salt in alternate layers, 25 mm dia light grade GI pipe, funnel, wire mesh, Concrete 1:3:6 type C-1 for pit and RCC pit cover, watering pipe, bends, elbows etc. Complete all as specified and directed. Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm.

S S CONSTRUCTION COMPANY (BID ID -3366430)

m/s. gopal krishan (BID ID -3365455)

M/s. M Company (BID ID -3365675)

GEE EMM ASSOCIATES (BID ID -3365384)

RAJ KAMAL BUILDERS (BID ID -3365557)

Bharat Builder (BID ID -3366301)